EEE-II/TC/2021-22/23.1

Amount

Dismantling, shifting, reshifting, assembling, cleaning and testing for healthiness / functioning of LT panel, AMF panel, Essential Panel, Capacitor bank Panel having incoming & ougoing feeders of capcity 3x1600 Amp ACB, 7X800 Amp ACB, 6X 630 Amp MCCB, 6X 400 Amp MCCB etc. as per Panels configuration of indoor type sub-station at its original location with all connections of Cable & earthing etc. as required to make them operationable. Testing of HT panel and making it operationable.Disconnection of all Cables & earthings etc / raising of height by providing of suitable iron structure / reconnection of all Cables & earthings etc. of 2 X1000 kVA dry type 11 kV / 430 V Transformers at indoor type sub-station etc. as required.

Checking / Servicing / mandatory testings ( like IR testing, Voltage Ratio Test, Magnetic Balance Test, Magnetising Current Test) / removal of dust particle, Tightness of bushings & busbars/ Scanning & programming/ replacement of mandatory parts etc. as required for commissioing and to make operational existing one 1000 kVA dry type 11 kV / 430 V Transformer at indoor type sub-station.

Supply and fixing insulating electrical rubber mats having minmum of 2mm thickness compling to IS 156152:2006 to be used in as protective flooring for electrical main panel room and transformer room.

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended From the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.a) 300 mm width X 62.5 mm depth X 2.0 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended From the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 62.5 mm depth X 2.0 mm thickness

Checking / Servicing / Overhauling / testing / replacement of mandatory parts like oil filter, fuel filter, coolant, engine oil, SLO bypass filter, 12V DC, 180 Ah lead acid battery, injector calibration etc. i/c dynamic balancing, Alignment, Varnishing Overhauling of other windings (if required) etc. as required for commissioing and to make operational existing 500 kVA DG set at Balakram Hospital.

Supply, Installation, Testing and Commissioning of 1.0 H.P. single phase sewerage Pit pump having atleast a head of 10 mtrs with pre installed water level sensor i.e. float switch for automatic operation of pump by sensing the water level.

Supply, Installation, testing and commissioning of cubical type control panel board for single phase sewerage pumping set of following rating complete with contactor, relay , MCB ,condenser ,voltmeter, ammeter and indication lamp etc including connections etc as reqd.(a)1.0 HP rating p/set.

Supply of Taparia Insulated Lineman Combination Cutting Plier.

Supply of Taparia 840 Screw Driver Set with Neon Bulb.

Supply of GH 1000 Steel Club Hammer with Handle (Taparia) (1000g)

Supply of CLH 450 Claw Hammer with Handle.(Taparia)

Supply of 102 Steel (16mm) Cutting Edge Octogonal Chisel (Blue and Silver) Taparia

Supply of Taparia Carbon Steel Combination Spanner Set (Pack of 8

Supply of Taparia (1808) 8-Pieces Ring Spanner Set.

Supply of Calter 16 Ton Manual Hydraulic Cable Crimping Plier Tool Kit (10-300 mm, 2 11 Die).

Supply of Bosch Concrete, Steel & Wood Gbh 220 Corded Electric Professional Rotary Hammer (720Watt, 2.0J, 2.3 Kg)

Supply of Taparia 1274 Steel (350mm) Stillson Type Pipe Wrench (Blue and Black)

Supply of Taparia 815 Steel Tester (Green).

Supply of 40 In 1 Pcs Wrench Tool Kit & Screwdriver And Socket Set tool - Screwdrivers Kit Box (Silver)

Supply of digital vernier calliper (Stainless steel) with LCD screen and inch/mm conversion 0-6 inch/0-150 mm.

Supply of Safety 11 KVA Electrical Insulated Rubber Seamless Hand Gloves (355 mm).

Earthing with 50 mm dia, 2 meter long copper pipe electrode including accessories required for completion of earthing and providing masonry enclosure with cover plate having locking arrangement etc. with 40 Kg earth resistance enhancement chemical compoud complete as required.

Earthing with 50 mm dia, 2 meter long GI pipe electrode including accessories required for completion of earthing and providing masonry enclosure with cover plate having locking arrangement etc. with 40 Kg earth resistance enhancement chemical compoud complete as required.

Providing and fixing 25mm x 5mm Copper strip on surface or in recess for connection etc. as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25mm x 5mm GI strip on surface or in recess for connection etc. as required.

Providing and fixing 25 mm X 5 mm GI strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.