ADDN ALTN TO BUILDING NO T 619 AT AF STN AGRA

Amount

Demolition of plain or corrugated steel sheeting any gauge, thickness of roof coverings

Demolition of wrought iron or mild steel of any description at any position not otherwise provided for.all as directed by Engr-in-Charge.

S& F Mild steel angle iron cut to shape as directed drilling holes notching for wire as in wind ties for roof including securing bolts etc including all necessary cutting and welding for similar work upto any ht of bldg complete all as specified and directed.

S & F rolled mild steel framed work as in doors or gates / rumblar/truss of angle or other section with gusset plate , rails bracess etc, drilling for fixing of steel sheets or other covering including distance pieces work confirming to Fe- 410-W (Gde -E-250) quality A complete all as specified and as directed.

S&F plates (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel 150 GSM after sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws etc complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 150 GSM after 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering ridge/velly gutturs etc, fixed with self tapping screws etc complete all as specified and directed.

Demolition of brick masonry built in CM complete all as specified and directed by Engr-in-charge.

M&L for brick work with flyash' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for RCC (design mix) M-25 using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed . Note - Reinforcement and form work shall be measured and paid separately.

M&L for RCC (design mix) M-25 using 20 mm graded stone aggregates as in beam, cantilevers, bressummers, lintels over 1.5 m span and similar work complete all as specified and directed. Note - Reinforcement and form work shall be measured and paid separately.

Mild Steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild Steel TMT bar 5 mm dia and over up to and including 10 mm dia as in stirrups, spacers & binders cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams etc and similar work, vertical or to batter for fair finished flat concrete surfaces complete all as specified and directed.

Use and waste of form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves, for flat fair finished concrete surfaces complete all as specified and directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed

M&L hardcore (broken stone) of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, path/hardstanding/subbase etc complete all as specified and directed

M&L for 25 mm thick PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring in leveling course complete all as specified and as directed

M&L for Non - skid coloured Ceramic tiles of 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

M&L for Glazed ceramic tiles in vertical surface of size 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering for bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed.

M&L for Non skid, joint free (edge cut) coloured ceramic tiles of 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors and skirting etc laid over with and including 15 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed

Demolition of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards any thickness and in any position including cover fillets complete all as specified and as directed.

M&L for Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) fully perforated, 12mm thick micro tegular edges or 10mm thick square edged false ceiling tiles of Size 595 x 595 mm (sleek pattern of all sizes) of approved texture, 12mm thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick galvanized @ 120 grams per sqm including both sides comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter, M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge

M&L for 12 mm thick of size (595x595x15mm thick) perforated, medium density, fiber sound obsorver wall paneling, exterior grade, colour and pattern as decided by GE, fixed to GI channel as required shape and size. with 50 mm thick acoustic glass wool sound observing material and refixing cables and casing and caping including taking down and refixing all appliances such as AC, Speakers etc, including extra wire, cable and other fittings required to make the appliances functional and to make Auditorium echo free complete all as directed and specified. Note:- Work will be executed through specialized firm and certificate of Echo free will be furnished from certified agency before completion of work

M&L for 3 mm thick cover fillets of standard hard board, 40 mm wide and fixing with screws complete all as specified and directed.

Providing and fixing factory made UPVC any colour casement (Openable) Door with frame made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with multi chambered, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 8mm thick toughened glass etc complete all as specified and directed by Engr in Charge. Note- Rate quoted by contractor shall include, the cost of 8 mm thick toughened glass and other connected accesseories.

Supply and fixing factory made UPVC white colour Three track three panels sliding window with fly proof stainless steel wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75sqm) comprising of UPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing the frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F Aluminium (Die cast ) body door closer hydraulically regulated designation No-3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed

M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:6 finished even & smooth without extra cement on internal wall etc including applying two coats of oil emulsion distemper white or tinted over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L rendering 15mm thick on brick or concrete surface of walls in cement mortar 1:4 finished even & smooth without extra cement on external wall surface including two coat of exterior emulsion paint over a coat of primer complete all as specified and directed.

M & L for prepararing new Steel surfaces over of 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

M&L for preparation of old surfaces of steel exc 10cm width or girth and applying Two coat of synthetic enamel paint complete all as specified and as directed by Engineer-In-Charge.

S&F 18mm thick PVC foam board (WPC) of density 600kg/cum one side prelaminates and other side plain for kitchen cabinet shutter including fixing of 0.8mm thick acrylic laminates as edge banding in matching colour over all exposed edge etc complete all as specified and as directed.

S&F 18mm thick PVC foam board (WPC) of density 600kg/cum both side plain for kitchen cabinet shutter including fixing of 0.8mm thick acrylic laminates as edge banding in matching colour over all exposed edge complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings etc not exc 15cm thick above or below ground level etc complete all as specified and directed by Engr-in-charge.

M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment laid and bedded on sand cushioning complete all as specified and directed. (Sand cushioning shall be measured and paid separately under relevant items)

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 50 mm thick cement concrete type C-I, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection etc. complete all as specified and as directed

Abhi Construction (BID ID -3146514)

aman construction & general suppliers (BID ID -3147194)

R.S BUILDERS (BID ID -3147608)

Sethi Brothers (BID ID -3146652)

Rakesh Kumar (BID ID -3147945)

Captainkomalchaharconstructions (BID ID -3145355)

Shiv Krishan Associates (BID ID -3144959)

M/s M S Sharma and Co. (BID ID -3147689)