SPL REPAIR WORK TO BLDG NO P-43 (ORs) AND PROVN OF SHED IN FRONT OF BLDG NO MES-141 AT ARMY CAMP JAMSHEDPUR UNDER GE RANCHI

Amount

Removing/taking down of old water proofing treatment from roof/concrete surface removal to distance exc 250mtr and not exc 500mtr from the site & cleaning of the roof surface with wire brush to make it free from dust, dirt etc complete all as speicified and directed

Demolition of cement concrete of any description and in any position complete all as speicified and directed

M&L Brushing neat cement slurry with 3kg of cement per sqm.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as speicified and directed

M&L 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor using liquid water proofing compound to make surface in level complete (liquid WPC shall be measured seperatly).

M&L providing, cement concrete 1 : 2 : 4 type B-0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges with using water proofing compound(liquid WPC shall be measured seperatly) complete.

M&L bedding layer of mortar 10mm thick finished fair and even in CM 1:4 mixed with liquid water proofing compound (liquid WPC shall be measured seperatly).

Supply only liquid water proofing compound

M&L Cleaning plastered roof surface and applying a coat of Oxidised bitumen based solvented primer @ 0.3 kg/Sqm of approved make on top of dry surface of RCC roof complete .

M&L applying a tack coat of industrial bitumen 85/25 at the rate of 1.2Kg per sqm including cleaning surface before laying of APP Membrane.

M&L APP modified polymeric waterproofing membrane 3mm thick with non woven polyster core of approved make applied by heating one surface of membrane with torch sealing with lap of 100mm and the overlap shall be selaed by flame complete all as per manufacturer instructions and as directed

M&L applying protective coating with bituminous based aluminium/Heat resisting paint in two coats complete all as speicified and directed

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as speicified and directed

M&L rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement.

M&L rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) with using on wall finishing the surfaces even and fair without using extra cement.

M&L 10 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as speicified and directed

Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter (without taking of shutter from framed) complete incl removing from site.

Taking down chowkhats or frame exc 1.50 Sqm but n.exc 4 Sqm each with shutter (without taking of shutter from framed) complete.

Taking down shutters of any description exc 1 sqm and n. exc 2 sq m each and removing from site.

S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm wood grain printed sheet PVC sheet reinforced with M.S.tube, suppling & fixing in opening as per specification & drawing

Taking down shutters of any description exc 1 sqm and n. exc 2 sq m each and removing from site.

S&F Solid PVC door frame of size 50mm x 95mm made out of 5mm wood grain printed sheet PVC sheet reinforced with M.S.tube, suppling & fixing in opening as per specification & drawing

S&F mild steel works as in small articles like hold fasts, conforming to Fe-290 or Fe E-165 complete all as specified & directed.

M&L 30 mm thick flush shutters solid core construction,with block board core and plywood face panels,commercial type on both sides complete .

S&F factory made solid PVC Moulded door shutter 28 to 30 mm thick(stiles) with 2 mm thick prelaminated Moulded PVC sheet polyurethane painted on the front face & 2 mm plain colour PVC sheet on back faces,and with particle board core supplying and fixing in frame at site as per specification and drawing.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified.

S&F Factory made solid panel PVC Skeleton moulded door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;wire gauzed i.e. panel will be of wire gauze,The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S.tubes. The wire gauge shall be stretched to tighten firmly.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2020) .

Dismantling steel window and ventilators including guard bar etc complete and removing to MES store all as directed at site.

S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 Gd E-165 .

S&F aluminium anodised aluminium window shutter Sliding type with frame of anodised aluminium channel section suitable for sliding aluminium shutters weighing not less than 0.55Kg/M including necessary joining cleats glazing clips rubber packing anodised aluminium shop beading screws with two shutter including 3.5mm thick coloured glass and one shutter with stainless steel wire gauze including necessary locking arrangement and handle etc; as specified etc complete .

S&F aluminium anodised aluminium ventilator shutter Sliding type with frame of anodised aluminium channel section suitable for sliding aluminium shutters weighing not less than 0.55Kg/M including necessary joining cleats glazing clips rubber packing anodised aluminium shop beading screws with two shutter including 3.5mm thick coloured glass and one shutter with stainless steel wire gauze including necessary locking arrangement and handle etc, as specified etc complete .

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or stainless steel wire staples

S&F butt hinges 100mm long medium weight cold rolled MS complete.

S&F extruded aluminium alloy butt hinges 100mm size type B-21 .

S&F 150 mm long aluminum anodized barrel tower bolt extruded section.

S&F 100 mm long aluminum anodized barrel tower bolt extruded section.

S&F aluminum handles cast type anodize 150 mm long.

S&F aluminum handles cast type anodize 75 mm long.

S&F 300 mm long of bolt mild steel sliding door bolts,plate type,stove enamelled black,with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate complete.

S&F 300mm ordinary rat tail rod pattern springs including roller and roller plate of Brass complete .

Taking up or down steel tubing and connection of 15 mm bore complete all as specified and as directed.

All as item No-42 above but for 20 mm dia bore pipe.

Supplying and laying 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supplying and laying 25mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S&F 20mm CPVC Brass Elbow for 'hot or cold' water supply connection and similar works etc,.

S&F 20mm CPVC Brass Tee for 'hot or cold' water supply connection and similar works etc,.

Dismantaling floor, hearth or wall tiling, including cement mortar bedding (but not backing ) removing serviciable tile to store & rubbish off the permisses.

M&L for 15 mm thick screed bed or bedding layer in CM (1:6) to receive floor finishes.

M&L Non - skid Ceramic jointless tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as speicified and directed.

M&L light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n. exceeding 0.36 sqm over 15 mm thick screedbed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match .

All as item 51 above but in vertical surfaces

M&L 10 mm thick cement plaster in CM (1:4) for backing of tiles complete all as specified.

M&L for coloured glazed ceramic tiles in vertical surface 300x450x7to8mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete.

Dismantling of boarding any description, fixed in any position with screws all as specified.

S&F prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination to timber frame work in Cupboard all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site.

M&L 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls/floors including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as speicified and directed

M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls/floors including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as speicified and directed

S&F PVC (SWR) bends 110 mm bore of any radius .

S&F PVC (SWR) bends 75 mm bore of any radius .

S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door .

S&F 75 mm bore PVC (SWR) vent cowl.

S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement.

S&F 110mm dia PVC (SWR)WC connector with lip ring.

Demolition and breaking up drain pipe 100 mm internal dia of pipe (salt glazed ware, AC or reinforced concrete) sat in cement mortor.

Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr deep for foundation in soft/loose soil & getting out.

Returning filling in trenches including spreading leveling and well ramming with water complete n.exc 25 cm thick in each layer in soft/loose soil.

Removing exavated soild n.exc 50 mtr and depositing where directed at a leve n. exc 1.5 mtr above the starting point.

M&L for 150 mm dia of reinforced concrete pipe, class NP2, laid and jointed complete with collars.

M&L PCC 1:3:6 type C-2 using 40 mm graded stone agg for concrete bed to drain pipes including , packing under and haunching against the sides of pipe, after they tested for 150 mm dia pipe.

M&L brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick wall built in CM (1:4) Complete.

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, bed plate etc complete all as speicified and directed.

M&L precast cement concrete type B-1 (1:2:4) using 20mm graded aggregate as in cover slab, shelves, and similar work set in CM (1:4) complete all as speicified and directed

M&L cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in lean concrete for foundation in drain,manholes etc complete all as speicified and directed

M&L mild steel TMT bars 8 to 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L rendering 10mm thick on fair faces of brick or concrete surfaces and finishing the surfaces fair and even without using extra cement in CM (1:4) with W.P.C (W.P.C will be measured and paid separately) complete all as speicified and directed

M&L machine cut Kota stone slab flooring 18-20 mm thick (square or rectangular size.) over cement screed bed laid and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as speicified and directed

All as per item No 78 above but on vertical surface as dado/ skirting.

M&L non skid coloured ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.06 sqm but n.exc 0.11sqm infloor etc;set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.

M & L 20 mm thick granite tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen slab.complete all as specified and directed

S&F in repair for 10ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as speicified and directed

S&F in repair 20mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as speicified and directed

S&F in repair, 15mm bore bib taps cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as speicified and directed.

S&F in repair 15 mm bore angle/ stop valves , fancy type chromium plated with long shank and cup (conceaeld type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as speicified and directed

S&F in repair vitreous china pedastal type water closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor.

S&F in EWC sheet cover to match EWC complete all as speicified and directed

S&F in repairs Health fauset (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook incl making connections and fixed in position complete in all respect as specified.

S&F in Repair for vitrious china wash basin, white flat back size 550 x 400 mm including waste, chain & plug and poreclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waiste pipe fitted complete .

S&F pillar tap of 15mm dia bore pipe, fancy type cast copper alloy with capstain head chromium plated with or without lettered “hot or cold” with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as speicified and directed

S&F PVC connection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as speicified and directed

Demolition of cement concrete (reinforcement) Water Tank any description and positin not other wise specifically.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed.

M&L for preparation of old decorated surface of walls by brooming down and wire brushing etc and applying two coats of white wash on wall complete all as speicified and directed

M&L for Preparation of old plastered or unplastered surfaces of ceiling and applying two coats of white wash to ceiling complete all as speicified and directed

M&L complete removal of existing treatment on walls and applying two coats of oil bound distemper of approved colour and shade over one coat of putty complete all as speicified and directed

M&L complete removal of existing treatment on walls and applying two coats of weather proof exterior emulsion of approved colour and shade over 2 mm thick wall putty complete all as speicified and directed

M&L including preparation of newly plastered wall surfaces and applying two coats of cement base paint of any colour over one coat primer complete all as speicified and directed

S&F in Repair brass CP tubular towel rail 20mm dia D type 60cm long between flanges complete all as speicified and directed

S&F in Repair Glass shelf of size 500mmX125mm consisting sheet glass with CP brackets and CP frame Size 500mm long complete all as speicified and directed

M&L for preparing the newly surface of any description not otherwise described over 10 cm width or girth on steel surface and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as speicified and directed

S&F mild steel, chromium plated with fixing brackets, tops, rollers etc fixed in position including fixing decorative type bracket complete all as speicified and directed

S&F in repair stainless steel kitchen sink with drainage board 1 mm thick including bedding in cement mortor on to dwarf wall or including fixing centilever brackets over all size 915 mm x 460mm bowl size 410 mm x 330 mm x 160 mm and including 38/40mm dia waiste pipe complete all as speicified and directed.

S&F stainless steel uternsil rack not less than 1 mm thick of approved quility and fixed in kitchen complete all as speicified and directed

Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc

M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6, complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil.

M &L cement concrete 1:4:8 type D-2, 75 mm thick as in sub base floors complete all as specified and directed.

M&L 20mm thick Screed bed or bedding layer in cement mortar 1:6 for laying of floor tiles complete all as specified and as directed.

M&L coloured glazed chequered cement concrete tiles with grey cement and no pigment 30cm x 30 cm x 25mm thick set jointed and pointed in neat cement slurry in floors complete all as specified and directed.

Excavation in post holes( or similar holes) each n exc 0.5cum each getting out, returning, filling in and ramming earth or broken rubble mixed with earh around , in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surfaces in hard/dense soil.

M&L PCC type C2 1:3:6 (using 40mm graded stone agg) as in surface channels and drains.

S&F Steel work in tubular trusses including embeded in concrete with special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete Fe 410-W(Gde E-250) quality-A.

S&F Roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc complete Fe 410-W(Gde E-250) quality-A.

M&L, applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution complete.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering as ridge/cladding to wall, fixed with self tapping screws as specified

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc.Removing materials to store in safe custody or for taking credit and making good distrubed surfaces of walls, floors etc Complete all as specified and directed.

M&L for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated and FR multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black, Earth - Green) FRLS grade dwawn in and including PVC casing and caping not less than 20mm size and fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.12 mm covered with 2.80 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete including 1.0 sqmm copper stranded earth wire for all as specified for the following :-

One light point controlled by one switch.

One fan point controlled by one switch.

One bell point controlled by one switch.

One socket outlet 3 pin 5 Amp controlled by one switch on the same board.

One socket outlet 3 pin 5 Amp controlled by one switch on indepdendent board.

M&L point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FR multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black, Earth - Green) FRLS grade dwawn in and including PVC casing and caping not less than 20mm size and fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.12 mm covered with 2.80 mm thick phenolic laminated white sheet cover for one 6 Pin 15 Amp socket outlet controlled by one switch on independent board.Incl. 1.5 Sq mm copper conductor earth wire and connected to common earth dolly on independent board.

Supplying and fixing angle holder, insulated polycabonate body with back plate complete all as speicified and directed

Supplying and fixing switch piano flush button single pole one way 5/6 amp complete all as speicified and directed

Supplying and fixing switch socket combination two in one 5 and 15 Amps multipurpose flush type universal 240Volts. Make - Anchor / Leader / SSK as approved.

Supplying and fixing switch socket combination two in one 5 Amps multipurpose flush type universal 240Volts.

Supplying and fixing socket outlet 2 in 1, 5 pin, 5/6 amp, flush type complete all as speicified and directed

Supplying and fixing ceiling rose 63 x 25 mm three terminals complete all as speicified and directed

Taking down U/S fan regulator and Supplying and fixing hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete. .

M & L in repair for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sq mm (FRLS) in PVC casing & capping non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 4 Sq mm (FRLS) of continuous earth wire green in colour complete all as specified and directed. (NOTE: Two runs of 6.0 sqmm cable & One run of 4 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.)

Supplying and fixing integrated LED Bulb 9 watt complete. Make - Philips or Havells or Syska as approved by GE.

S & F in repair box type fitting 1x 18w, blue coloured end caps, prewired for LED tube including LED tube 16 watts, including connecting up with twin core twisted flexible copper conductor cable with suitable size complete and all as specified and directed .

Supplying and fixing powder coated, CRCA steel sheet MCB distribution board double door (minimum thickness 1.2 mm & constructed as per IS : 8623), degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces etc as required of following ratings & ways:-

SPN, 240 volts, 4 ways.

SPN, 240 volts, 8 ways

Taking down U/S MCBs/ELCBs with incoming and outgoing controls any make, any capacity after disconnecting complete.

S&F MCB SPN 6A to 40A 240V 9KA

S&F MCB SP 6A to 32A 240V 9KA

S&F Exhaust fan 300 MM sweep heavy duty fan including cutting and chesing ,making hole for fixing complete.

M&L Bell push , flush type , 5 Amp complete

S&F Ceiling fan 1200mm sweep 5 star power in put 43 watts, Speed 330 RPM including taking down old ceiling fan and deposite to E/M store yard. model no-Fusion -50 of Havells.

S&F Bell , AC 230 Volts single pole complete

Supply and Fix electric water heater storage type steel body with copper inner tank and heating element upto2 KW capacity 25 Litre BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, as ,connection piece etc. Make : Bajaj/C&G/ Havell's (Monza EC). Note : Old uns geyser will be deposited to SDO Jamshedpur.

BUILDCON ENTERPRISES (BID ID -3069937)

M/S ABDHESH CONSTRUCTION (BID ID -3070321)

M/S DILIP KUMAR (BID ID -3069751)

M K Enterprises (BID ID -3071003)

UPENDRA KUMAR SINGH (BID ID -3075181)

jai maavindwashni sales & supply (BID ID -3070572)