REPAIR/ MAINTENANCE OF WALL PLASTER FLOORING, TILING, JOINERY AND OTHER ALLIED WORKS IN SUNDER JI ENCLAVE, CARRIAPPA ENCLAVE BC JOSHI VED VIHAR VAIDHYA ENCLAVE ETC MD OFFICERS ACCN AREA UNDER AGE B/R-1 OF GE (NORTH) MEERUT CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc Complete all as specified and directed.

M&Lold size brick work with sub class B bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 Complete all as specified and directed.

M&L old size brick work with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks Complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. Complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3),Complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M& L for preparing plastered un plastered new surfaces on ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall by applying wall care putty averaging thickness 2mm and rubbing with sand paper for making smooth surface and applying two coat of oil emulsion distemper over one coat of primer through roller, complete all as specified and directed .

M&L for preparation of New surface of of wall by applying 1mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified and directed.

M&L for preparation of Complete removal of existing treatment plastered old surface of of wall by applying 1mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified and directed.

M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any position unframed work Complete all as specified and directed.

M&L for Rolled mild steel in Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats similar work conforming to Fe 410 -W (Gde E- 250) quality A etc complete all as specified & directed.

M&L for in repairs Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 Complete all as specified and directed.

M&L for preparation of old surface after complete removal of existing treatment by mechanical complete all as specified and directed.

M&L for applying 1mm thick wall care putty making smooth surface complete all as specified and directed.

M&L for one coat of primer complete all as specified and directed.

M&L for Two coat of OBD using roller for painting complete all as specified and directed

M&L for Two coat of plastic emulsion paint complete all as specified and directed

M&L for one coat of OBD complete all as specified and directed

M&L for one coat of acrylic smooth coat applied @ 1.67 ltr/ 10 sqm over using roller for painting complete all as specified and directed.

M&Lfor preparation of old plastered surface of ceiling and applying two coat of WHITE WASH over one coat of primer using roller for painting complete all as specified & directed.

M&L for Preparing old Plastered or unplastered surfaces of walls and applying one coat of white wash Complete all as specified and directed.

M&L for preparation of old painted wood and wood base surfaces of any description, not otherwise described over 10 cm width or girth and painting with a coat of sythetic enamel paint Complete all as specified and directed.

M&L for preparation of old steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier Complete all as specified and directed.

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each Complete all as specified and directed.

Taking down chowkhat or frames of door/ window / ventilators with shutter(Without taking off shutter from the frame) n.exc 1.50 m each Complete all as specified and directed.

Taking down shutters of any description exc 1.00 m and n.exc 2.00 Sqm Complete all as specified and directed.

M&L for Anodised aluminium Powder Coating (minimum thickness of powder coating 50 micron) frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc Complete all as specified and directed.

M&L for Anodised aluminium Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) sliding window and ventilator shutters, sliding (Two/Three) type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium and Sliding Arrangement Complete fittings as required Complete all as specified and directed.

M&L for Anodised aluminium Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) door Shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium Complete fittings as required Complete all as specified and directed.

S&F for 4mm thick, black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) not exc 0.5 sq.m from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.

M&L for 3mm thick Sheet glass, pin head type and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm Complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

S&F Mortice lock, brass, four lever, verticle type, size 75mm complete all as specified and directed.

S&F hasp & staples 125mm in size, safety type alu. anodised fixed with screws Complete all as specified and directed.

M&L in repairs, HOLLOW PVC Wall lining consisting of 5 mm thick plain colour pvc sheet inclusive of solvent cement and fixing at site on PVC Frame with 5mm pvc fillets as per specified and drawing shown as per page of SSR part II . complete all as specified and directed.

S&F in repairs plastic seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device Complete all as specified and directed.

S&F in repairs vitrous china wash hand basin white flat back, size 580x450mm including waster pipe , chromium plated waste coupling 32mm dia , bracket etc Complete all as specified and directed.

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.

S&F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) Complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Complete all as specified and directed.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides face is covered with decorative face veneer with lipping/frame to match all as specified and directed

S&F Glazed and skelton shutters 30 mm thick second class hard wood, opened rebated and prepared to receive wire mesh etc, edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for sucuring witre mesh etc. Size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a) Complete all as specified and directed.

S&F Mortice lock, brass, four lever, verticle type, size 75mm complete all as specified and directed.

S&F aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed Complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per Complete all as specified and directed.

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per Complete all as specified and directed.

S&F 100 mm butt hinges, meium weight cold rolled mild steel Complete all as specified and directed.

S&F aluminium handle cast type anodised 125 mm long Complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 150 mm, extruded section Complete all as specified and directed.

S&F Mild steel springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate Complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 200 mm, extruded section Complete all as specified and directed.

S&F aluminium anodised sliding door bolts with hasp and stapple extruded section or cast aluminium alloy 300 mm long Complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises Complete all as specified and directed.

M&L Non-skid coloured ceramic tiles 7 to 8 mm thick square/ rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L for light shade, vitrified tiles, 7 to 8 mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 15mm thick screed bedding in CM (1:6) complete all as specified and directed.

M&L for vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 350mm x 7mm/600mmx300mmx7 mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

M&L for 18 -20mm thick granite of approved shade and pattern, granite factory made bull nosed, polished (table rubbed and polished) as in jambs, wall,window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

M&L for rounding to edges of stone slabs two edge full round, such as in steps,cooking platform and other similar situation complete all as specified and directed.

Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets Complete all as specified and directed.

S&F in repairs 18/19mm thick Soild WPC board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with screws to WPC frame work in cup boards, rebated or flat edged fancy handle , Magnite lock complete all as specified and directed.

S&F in repairs continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40 mm complete all as specified and directed.

Dismantling water tank of capacity exc 500 ltrs but not exc. 1000 Ltrs Complete all as specified and directed.

S&F for white rotational moulded polyethene water storage tank 500 Ltrs ( cylinderical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I. Complete all as specified and directed.

S&F for white rotational moulded polyethene water storage tank 1000 ltrs ( cylinderical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I. (Cap 1000 ltrs capacity).

S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) Complete all as specified and directed.

S&F in repairs gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore Complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and wall complete all as specified. complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors Complete all as specified and directed.

M&L for cutting chases for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth Complete all as specified and directed.

S&F in repairs 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with fancy type screwed both ends for iron or for union Complete all as specified and directed.

S&F in repairs 15 mm dia brass chromium plated mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead Complete all as specified and directed.

S&F in repairs cromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule Complete all as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts 450 mm long Complete all as specified and directed.

S&F in repairs, chromium plated towel rack of size 24" complete all as specified and directed.

S&F in repairs vitreous china ware EWC combined pattern complete with internal fittings Complete all as specified and directed.

S&F in repairs CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe Complete all as specified and directed.

S&F in repairs super special colours vitrous china wash hand basin white flat back, size 580x430mm including waster pipe , chromium plated waste coupling 32mm dia , with pedestal / bracket etc complete.Cat part No. 1019A & 1109A Padestal Complete all as specified and directed.

S&F in repairs stainless steel fancy type curtain rod, 20mm dia fixed with braket, incl taking down of old curtain rods Complete all as specified and directed.

S&F in repairs Toilet paper holder of brass chromium plated conforming to the samples kept in the office of Engineer-in-Charge.

S&F in repairs Towel ring 200 mm dia chromium plated fancy type conforming to the sample kept Complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick for kitchen with plugs, CP waste coupling, waste pipe and including in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm Complete all as specified and directed.

S&F in repairs 1mm thick, stainless steel plate rack of size 1200mm x 900mm x 180mm complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long Complete all as specified and directed.

S&F in repairs, corner glass shelf with bracket complete all as specified and directed.

S&F in repairs brass chromium plated soap dish complete all as specified and directed.

S&F in repair for over head Shower square type 100x200mm, stainless steel Complete all as specified and directed.

Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required for 110mm and 75mm bore of pipe complete all as specified and directed.

S&F in repairs,110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laying as in floor and complete all as specified and directed.

S&F in repairs PVC(SWR) junction single, (Single T) equal or unequal provided with access door 110mm bore Complete all as specified and directed.

S&F in repairs PVC(SWR) bends 110mm bore any radius Complete all as specified and directed.

S&F in repairs PVC(SWR) floor trap, 110mm bore, plain with grating including jointing with solvent cement Complete all as specified and directed.

Dismantling wall and ceiling boads (fibre, pulp, insulation etc.) or insulation boards/ slab/ blankets, any thickness including aluminium snap grid complete all as specified and directed.

M&L for 4MM thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws Complete all as specified and directed.

S&F anodised aluminium snap grid frame workframe work for false ceiling Complete all as specified and directed.

Taking down aluminium ventilators (with frame & shutters) for servicing by tightening loose fittings & aluminium sactions by tightening existing screws or providing new screws/aluminium cleats of appropriate size, cleaning, greasing/oiling (where required), easing & making functional and refixing in same opening Complete all as specified and directed.

S&F in repairs 15mm dia, brass chromium plated health faucet with 1.25 meter long flexible hose and wall hook complete all as specified and directed .

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white with 'p' or 's' trap (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia 300mm long for wash hand basin area with brackets complete all as specified and directed.

S&F pillar tap cast coppeer alloy with captan head chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shank and fly nut fancy type 15mm bore fixed in repair Complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.

M&L for cement concrete 1:4:8, type D2(40mm graded stone aggregate) as in 75mm thick sub base Complete all as specified and directed.

M&L for chequered cement concrete colour tiles glossy finish size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 15 mm thick screed bed in cm (1:6) complete all as specified.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour (Glossy finish), design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed.

S&F for powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed.

S&F in repairs 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof wall etc complete all as specified and directed.

S & F in 12mm thick toughned glass as in fixed glass, hinged doors, partitions, automatic doors, windows and similar work including cutting to shape, drilling holes, including single leg spider, ceiling/bottom to glass connector and pivots, glass to glass connector, stabilizer rod, floor clamp, plastic parts, wall to glass hinge, knob, roller, floorspring (With S.S. Cover), C Shape Square SS Handle - 450mm etc. all fittings for doors/partitions (including SS fittings) required to make functional Complete all as specified and directed.

M&L for exterior wall cladding tiles brick pattern of any colour approved by engr-in-charge of size 300x600x10 mm thick mat finishes over 10mm thick heavy duty chemical resistant adhensive for fixing tile on wall complete all as specified and directed.

S&F at site and on position floor mounted vanity counter made of Superior Material Quality with HDHMR (High Density High Moisture Resistant) of size 770x451x680mm/800x470x680mm having vitreous china basin on top with SS cabinet & side cabinet and soft close door & drawers of approved pattern and design with necessary fixing arrangment Complete all as specified and directed. (Note: wash basin to be paid separately)

Dismantling fencing wire mesh, any type Complete all as specified and directed.

Supply only MS galvanised chain link fencinng of 50x50mm mesh size and 3mm dia wire complete all as specified and directed.

Fixings only chain link fencing including line wires, any mesh, size and type to standards, rails, straininng bolts etc including provision of binding wire complete all as specified and directed. Note : supply only chain link fencing, MS 10mm dia round bars as line wire and MS flat iron shall be measured and paid separately under respective item of this schedule Complete all as specified and directed.

S&F in repairs galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of stanadard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed.

S&F for mild steel screw bolts(machine made) exceeding 5cm and not exc 10cm long with diameter of shank 11 to 15mm with hexagonal or square heads at one end and screwed the other fitted with washer and one hexagonal or square nut complete alll as specified and directed.

M&L for New or previously un treated steel Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint applying two coats of Synthetic enamel paint over a coat of red oxide primer Complete all as specified and directed.

Excavating in post holes(or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, in soft/loose soil Complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone agreegate as in bed blocks to fencing post Complete all as specified and directed.

S&F mild steel in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 Complete all as specified and directed.

M&L in repairs for Type B0 1:2:4 (12.5mm graded aggregate) Providing precast cement concrete louvres and jallies, 25mm thick (mea sured solid), Set in cement mortar 1:4 complete all as specified and as directed.

M&L for Type D2 1:4:8 (40 mm graded aggregat e) Cement concrete in in foundations, filling and mass concrete complete all as specified and directed.

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

M&L for nominal mix concretes 1:2:4 type B-O(using 12.5 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement complete all as specified and directed.

M&L for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate) complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30 kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed. (including existing water tank on roof disconnected and after cleanig same position connecting)

Punit Jain (BID ID -3327043)

ATHARV CONSTRUCTION (BID ID -3342091)