CERTAIN REPAIR TO TOILET BLOCK AT OTM ACCN UNDER AGE B/R-II AT AMRITSAR CANTT UNDER GE ASR

Amount

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed

M&L for rendering 5 mm thick on brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment complete all as specified and directed.

Material and labour preparation of newly plastered surface of wall and applying two coats of oil bound distemper with necessary putty filling complete all as specified.

All as per item No 06 above but on ceiling surface complete all as specified and directed.

Material and labour for applying average 1 mm thick wall putty after complete removal of existing treatment on wall, ceiling, on old decorated surfaces or newly plastered surfaces complete all as specified.

Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:4 complete all as specified and directed.

All as per Srl item No 10 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 5 shall be reused after necessary cleaning of mortar) complete all as specified and directed.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed.

All as per Srl item No 13 above but size of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr complete all as specified and directed.

Taking down of aluminum powder glazed Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each ,clit,screw, and refixing in the same opening after necessary easing and resucring with new SS butt hinges and new screws complete all as specified and directed.

Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 complete all as specified and directed. (a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window. (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf. (c) MS tower bolt 150mm long - 02 Nos/leaf. (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf. (e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf. (f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf Note :- Sheet glass, wire mesh and painting shall be measured and paid seperately.

Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified. NOTE:-Sheet glass and painting shall be measured and paid separately.

S&F pressed steel frames 1.25mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges complete all as specified and directed.

S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed.

S&F for 35mm thick 2nd class hard wood panelled shutters (two panels) Factory Made with lock rail & panel of 9mm BWP commercial ply or 12mm thick vineered particle board with commercial vineering on both faces, the size of rail & styles as per IS: 1003 (Part-I) klin seasoned & chemically pressure treated (factory made shutters) complete all as specified and directed.

S&F for 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc for Windows, ventilators etc with stiles and rails s as specified in SSR specified in SSR Part I, Section 8, clause 8.24 (b);supplied and fitted to chowkats complete all as specified and as directed .

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed

Supply and fixing for 100 mm x 63mm WPC Frame (wood polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawel strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

Supply and fixing for 30mm thick moulded WPC factory made 100% solid door comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minumum dencity of 650 kg/ cum and screw withdrawa strenth of 1800 N (Face )&900 N (Edge), minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed with steelness steel butt hinges of requred size with necessary full body threank SS screw all as direction of Engineer-in-charge ( steelness srew and butt hinges and necessary SS Screw shall be paid separatly)

S&F powder coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed by Engineer-In-Charge. (Min. thickness of powder coating 50 micron)

S&F powder coated aluminium glazed shutter(for doors) Al-section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading complete all as specified and directed. (Min. thickness of powder coating 50 micron)

S&F Aluminium powder coated (of any colour) window and ventilator shutters, (Min. thickness of powder coating 50 micron) with style top and bottom rail of section 44 x 44 mm of 14 guage thick side hung type without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws peg stay 150mm long, but hings 100 mm tower bolt 100 mm and handle 100 mm with anodised aluminium grill type D weight 2.625 Kg per sqm ref TD CEJZ/TD-32A/12 with fixed to the window frame with CP / stainless steel screws @200 mm center etc complete all as specified and directed.

S&F tinted sheet glass, 5.5mm thick ordinary quality, in squares, exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer scomplete all as specified and directed

S&F tofan glass, 10 to 12 mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer complete all as specified and directed

S&F figured glass, 5 mm thick ordinary quality, in squares Not ,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer scomplete all as specified and directed

S&F repairs, Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and directed.

S&F Brass mortice lock, 4 levers, verticle type, size 100 mm, complete all as specified and directed.

Taking down aluminium door shutters of area exc 1 sqm but n.exc 2 sqm each and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening complete all as specified.

All as per item No 33 here above but area not exc 1 sqm each window shutters complete all as specified and directed.

M&L two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described above priming coat of red oxide including prepration of previously untreated surfaces complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description, exceeding 10 CM width or grith and applying one coat of synthetic enamel paint complete all as specifed and directed.

M&L two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described above pink primer including prepration of previously untreated surfaces complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description, over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete incuding taking down all as specified and directed

S&F in Repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty complete all as specified and directed.

All as per Srl item No 41 above but figured glass pin head type & glazing with oil putty complete all as specified and directed.

Hacking out old broken glass from wooden/ steel window cleaning the surface and removing from the site, thenafter S&F clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty/wooden beading as per site requirements complete all as specified and directed.

S&F 250 mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 125mm of extruded section and fixed complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed.

S&F 125mm long Aluminium handles, cast type anodised complete all as specified and directed.

S&F 150mm long Aluminium handles, cast type anodised complete all as specified and directed.

S&F stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.

M&L for Vitrified ceramic light shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes complete all as specified and directed.

S&F glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.

S& F in repair vitreous china wash hand basin with pedestal white of size 420x420 mm flat back including bracket, of , Pedestal white, (half or full Threaded) bore dia of discharge pipe 32 mm wt 45 gms and PVC wastw pipe with cup & or equivalent as approved By Engr-IN-Charge.

S& F for 15 mm dia Bib tap, cast coper alloy fancy type chromium plated with flange screwed down screwed for iron pipe of 15mm bore and fixed in repairs or equivalent as approved By Engr-IN-Charge.

S& F CP health faucet suitable 15 mm dia with lead or equivalent as approved By Engr-IN-Charge.

S&F in Repair bathroom cabinet mirror 35x45cmor equivalent as approved By Engr-IN-Charge.

S&F in repair vitreous China Squatting pan 'Orrisa' pattern size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110/110mm bore complete all as specified and directed. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately.

S&F of Vitreous china wash down water closet pan( pedestal pattern), white with PVC(SWR) 'P' trap 110/110mm bore complete all as specified and directed. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately.

Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve float handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed.

Supply only Plastic water closet seat,white/ivory,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Toilet Seat Cover) complete all as specified and directed.

S&F in repair CP Jet spray suitable for EWC complete all as specified and directed.

Supply and fixing Chromium plated Health faucet in repair with 1.5 metre long chain complete all as specified and directed.

S&F in Repair vitreous China wash basin white,flat back size550x400mm including PTMT waste coupling 32mm bore,waste PVC pipe complete, CP brass Pillar Tap 15mm bore complete all as specified and directed.

S&F in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair of brass CP mixture for mixing hot & cold water screwed down for GI pipe of 15mm bore and fixed complete all as specified and directed.

S&F Brass chromium plated Wall mixer with bend pipe in repairs suitable for mixing Hot & Cold water and making leakagefree connection with wall tiles & GI pipes complete all as specified and directed.

Supply & Fixing vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

Dismantling water tanks and Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore.

All as per Srl Item no 71 above but of capacity 500 litre complete all as specified and directed.

S&F 25mm bore, Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.

S&F 20mm bore, Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.

S&F Vitrous china urinal partition white of size 310x770mm and fixed to wall terminating about 40cm above floor line complete al as specified and directed.

S&F 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.

S&F 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.

S&F 25mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.

S&F 40 mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.

S&F in repair15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete all as specified and directed.

S&F in repair 15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete all as specified and directed.

S&F in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed

S&F in repair Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC waste pipe 32mm dia fixed to WHB/Urinals complete all as specified and directed.

S&F in repairs 100mm dia CP grating with or without hole type complete all specified and directed.

S&f in repairs CP brass towel rail of 20mm dia and 600mm long complete all as specified and directed.

S&F in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed.

S&F soap dish, vitrous china white, approximate size 160 x 160 x 90 mm embedded in the wall complete all as specified and directed.

S&F Vitrous china white (Box type) toilet paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc. and S&F 75 mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge. Make:-Supreme ,Finolex, Jyoti.

Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc. and S&F 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge. Make:-Supreme ,Finolex, Jyoti.

S&F 110 mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm PVC floor trap complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete all as specified and directed.

M&L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 complete all as specified and directed.

Demolition of cement Concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 with water proofing compound @2% weight of cement and, finishing even and smooth without using extra cement complete all as specified and directed. (WPC shall be measured and paid separatly).

Supply only integral water proofing compound complete all as specified and directed.

M&L for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in sunken portion complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

M&L Cement concrete type C-2, 1:3:6 using 40mm graded agregate as in foundations, filling and mass concrete complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out soft loose soil complete all as specified and directed.

Demolition and breaking up existing unservicable 150mm SGSW pipe and haunching against the sides of pipes at any depth including removing rubbish to a distance exceeding 100 m complete all as specified and directed.

Demolition and breaking up existing unservicable 100mm SGSW pipe and haunching against the sides of pipes at any depth including removing rubbish to a distance exceeding 100 m complete all as specified and directed.

Supplying laying in trenches jointing and testing 150mm bore salt glazed stoneware pipe grade A drain pipe ISI marked all as specified and directed. ( Excavation and earthwork shall be measured and paid separately under appropriate item Sch A)

Supplying laying in trenches jointing and testing 100mm bore salt glazed stoneware pipe grade A drain pipe ISI marked all as specified and directed. ( Excavation and earthwork shall be measured and paid separately under appropriate item Sch A)

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as concrete bed, laid to falls in trenches in any depth including packing under, and haunching against the sides of SGSW pipes 150mm bore, after the pipes have been laid and tested including complete all as specified and directed .

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as concrete bed, laid to falls in trenches in any depth including packing under, and haunching against the sides of SGSW pipes 100mm bore, after the pipes have been laid and tested including complete all as specified and directed .

Returning filling in the soil including spreading, levelling, watering and well ramming in layer n.exc 25cm thick each layer complete all as specified and directed.

Removing excavated soil to a distance not exc 50m away and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

m/s. gopal krishan

Harai Sharan Govt Contractor

RAJ KAMAL BUILDERS

ESS KAY BUILDER

B.J.CONSTRUCTION CO

M/s. M Company

GEE EMM ASSOCIATES

MAAN ENTERPRISES