REPAIR MAINT OF WOODEN FURNITURE AT OTM ACCN AT RMS

Amount

Sofa set Five and Four seater (FD-281): Taking out old unsv components of Sofa set five & four seater and S& F new components as per shape and size as existing made out of well seasoned 1st class hard wood teak complete for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-Charge :-

Seat Rails Right and left of Sofa set (Single Seater)

Seat Rails Front and Back of Sofa set (Single Seater)

Rails of back frame Top and bottom of Sofa set (Single Seater)

Back and bottom support of Sofa set (Single Seater)

Long rails of seat front and back of Sofa set (Three Seater)

Long rails of Back frame Top and bottom of Sofa set (Three Seater)

Long Back and bottom support of Sofa set (Three Seater)

Arms of Sofa set.

Bearers of seat and back rest of Sofa set.

Taking out old unsv foam cushion and S & F new cool foam cushion 32 Kg/cum density of make Sleepwell/Kurlon of size 580x560x100mm and superior quality tapestry cloth cover duly stitched at one end with openable zip and other making good shape (Tapestry cloth not less than Rs.295/- per mtr) colour & pattern etc complete all as specified and as directed by Engr-in-Charge .

M & L for applying two coats of french polish on internal and external surfaces of the Sofa Set 5 seater including cleaning and preparing the old wooden surfaces etc complete all as specified and as directed by Engr-in-Charge .

M & L for applying two coats of french polish on internal and external surfaces of the Sofa Set 4 seater including cleaning and preparing the old wooden surfaces etc complete all as specified and as directed by Engr-in-Charge .

Supply only new tapestry cloth cover duly stitched at one end and at other end with openable zip and to fit for sofa cushion 580x560x100mm (Tapestry cloth not less than Rs.295/- per mtr) colour and pattern as approved by GE etc complete all as specified and as directed by Engr-in-Charge .

Chair writing (FD/E6/MAP/12): Taking out old unsv components of Chair writing and S & F new Components as per shape and size as existing for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Cushion seat alongwith approved coloured fabric.

Cushion back alongwith approved coloured fabric.

Supply and fixing new tapestry cloth cover with seat/back duly stitched (Tapestry cloth not less than Rs.290/- per mtr) colour and pattern as approved.

Taking out cushion seat of chair writing and spot welding to joints of existing MS flat iron of size 25x3mm welded to the bottom frame and refix the removed cushion seat all as specified and shown on drawing and as directed by Engr-in-charge

M&L for Removing of existing paint by scraping with abrasive cloth and apply a coat of synthetic enamel paint black on steel surfaces of chair writing after preparation of surfaces etc complete all as specified and as directed by Engr-in-Charge .

Hard rubber shoes with appropriate size steel screw

Table computer (FD/E6/MAP/03): Taking out old unsv components of table computer and S & F new components as per shape and size as existing for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Top made out of 18mm thick pre-laminated MDF board

Sides made out of 18mm thick pre-laminated MDF board

Sliding key board drawer made out of 18mm thick pre-laminated MDF board including telescopic channels.

M&L for Removing of existing paint by scraping with abrasive cloth and applying a coat of synthetic enamel paint black on steel surfaces of table computer after preparation of surfaces etc complete all as specified and as directed by Engr-in-Charge .

Table 900 x 600 mm without drawers (FD-284): Taking out old unsv components of Table 900 x 600mm without drawers and S&F new Components as per Shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Top of size 900x600mm made out of 18mm thick pre-laminated MDF board teak faced of make-Green/Century/Archid & providing teakwood beading 4mm thick all around the top

Short Rails

Long Rails

Short Stiffners

Long Stiffners

M & L for applying two coats of best quality french polish to the table of size 900x600mm after preparation of old surfaces etc complete all as specified and as directed by Engr-in-Charge .

Computer Chair revolving with arms (FD/E6/MAP/01): Taking out old unsv components of computer chair and S & F new components as per shape and size as existing for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Cushion seat alongwith approved coloured fabric

Cushion back alongwith approved coloured fabric

Twin wheel castors

5 pronged base 10.5mm dia forged bright zinc plated MS castor pin is of press fitted into each prong for holding the castors including replacement of gas lift of 100mm stroke length and gas pressure of 300n force as existing.

Chair Revolving Executive with arms high back(TP): Taking out old unsv components of chair revolving executive with arms high back and S & F new components as per shape and size as existing for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Cushion seat alongwith approved coloured fabric.

Cushion back alongwith approved coloured fabric.

Twin wheel castors

5 pronged base 10.5mm dia forged bright zinc plated MS castor pin is of press fitted into each prong for holding the castors including replacement of gas lift of 100mm stroke length and gas pressure of 300n force as existing.

Table Dining 8 Pers (FD-273): Taking out old unsv components of Table Dinning 8 Pers and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Top of size 1800x900mm made out of 18mm thick pre-laminated MDF board teak faced of make-Green/Century/Archid and providing Teak wood beading 4mm thick all around the top includig fixing of 8 Nos wooden corners to joning corner of rails & legs for each table etc complete all as specified and as directed by Engr-in-Charge .

Long Rails

Short Rails

M & L for applying two coats of best quality french polish on the table of size 1800x900mm after preparation of old wooden surfaces etc complete all as specified and as directed by Engr-in-charge :-

Table Writing (FD-275): Taking out old unsv components of Table Writing and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Top of size 1145x600mm made out of 18mm thick pre-laminated MDF board teak faced of make-Green/Century/Archid & providing teakwood beading 4 mm thick all around the top.

Top Rails

Stiffners

Drawers and providing CP knob 40mm.

Shutters made of pre-laminated MDF board teak faced and providing CP Knobs and piyano hinges for hanging with the table

6 mm thick commercial ply make- Globe/Green/Archid on back of cupboards

M & L for applying two coats of best quality french polish on wooden table of size 1145x600mm after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Table Centre (FD-274): Taking out old unsv components of Table Centre and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Top of size 450x900mm made out of 18mm thick pre-laminated MDF board teak faced of make-Green/Century/Archid and providing Teakwood beading 4 mm thick all around the top

Long Rails

Short Rails

M & L for applying two coats of best quality french polish on table centre of size 450x900mm after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Table 900 mm x 600 mm with drawers (FD-283): Taking out old unsv components of 900 x 600 mm with drawers and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Top of size 900x600mm made out of 18mm thick pre-laminated MDF board teak faced of make-Green/Century/Archid and providing Teakwood beading 4 mm thick all around the top.

Short Rail

Long Rails

Short Stiffners

Long Stiffners

Drawers and providing CP knob 40mm

M & L for applying two coats of best quality french polish on the table of size 900x600mm after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Talbe 900 x 900 mm (FD-291) : Taking out old unsv components of Table 900 x 900mm and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Top made out of 18mm thick pre-laminated MDF board teak faced of make-Green/Century/Archid and providing Teak wood beading 4 mm thick all around the top includig fixing of 8 Nos wooden corners to joining part of rails and legs for each table.

Rails

M & L for applying two coats of best quality french polish on the table after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Table Dining 6 Pers (FD-273) : Taking out old unsv components of Table Dinning 6 pers and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Top of Size 1500x900mm made out of 18mm thick pre-laminated MDF board teak faced of make-Green/Century/Archid and providing Teak wood beading 4mm thick all around the top includig fixing of 8 Nos wooden corners to joning corner of rails and legs for each table

Long Rails

Short Rails

M & L for applying two coats of best quality french polish on the table of size 1500x900mm after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Teapoy (FD-278): Taking out old unsv components of Teapoy and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Top of size 450x600mm made out of 18mm thick pre-laminated MDF board teak faced of make-Green/Century/Archid and providing Teakwood beading 4mm thick all around the top

Long Rails

Short Rails

M & L for applying two coats of best quality french polish on the teapoy after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Peg table (FD-277): Taking out old unsv components of Peg table and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Top of Size 450x300mm made out of 18mm thick prelaminated MDF board teak faced of make-Green/Century/Archid & providing teakwood beading 4mm thick all around the top

Long Rails

Short Rails

M & L for applying two coats of best quality french polish on the table of size 450x300mm after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Bed Plywood Top (FD-246) : Taking out old unsv components of Bed Plywood Top and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Top of 12 mm thick ply wood commercial BWR grade. Make-Globe/Green/Archid

Long Rails.

4 mm thick ply wood one side teak face of size 660 x 900 mm to head board and 4 mm thick teak wood beading all round the head board.

4 mm thick ply wood one side Teak face of size 900 x 300 to foot board and 4mm thick teak wood beading all round the foot board.

Bottom support.

M & L for applying two coats of best quality french polish on the bed after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Table Dressing Ladies (FD-251) : Taking out old unsv components of Table Dressing Ladies and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

looking mirror of size 1220 x 365 mm & 5mm thick make-Atul/Modi Guard/Saint Gobin

Frame and back member of the mirror including back side 6 mm thick commercial plywood make-Globe/Green/Archid

Top of size 900x325mm made of 18mm thick pre-laminated MDF board teak faced of make-Green/Century/Archid and providing 4mm thick Teakwood beading on front.

Drawers and CP knob 40mm.

Glass panes shutters 5 mm thick alongwith aluminium channel and glass runners.

M & L for applying two coats of best quality french polish on the table dressing ladies after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Table Dressing Gents (FD-230) : Taking out old unsv components of Table Dressing Gents and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Looking mirror of size 760 x 380mm & 5mm thick make - Atul/Modi Guard/Saint Gobin

Frame & back member of the mirror including back side 6 mm thick commercial plywood make-Globe/Green/Archid

Drawers and CP knob 40mm.

Top made out of 12 mm thick pre-laminated MDF board teak faced of make-Green/Century/Archid and providing 4 mm thick Teakwood beading on front side.

M & L for applying two coats of best quality french polish on the table dressing gents after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Hat Stand with Mirror (FD-233) : Taking out old unsv components of Hat Stand and S& F new Components as per Shape and size as existing for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Looking mirror of size 300 x 440mm & 5mm thick make - Atul/Modi Guard/Saint Gobin

4 mm thick plywood one side teak face make -Kitply/Greenply/Archid on front of size 1000 x 710 mm & New Teak wood edging of size 6 x 35 mm all around the hat stand

Aluminium Pegs 100 mm long

M & L for applying two coats of best quality french polish on the hat stand after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Side Board (FD-241) : Taking out old unsv components of Side Board and S& F new Components as per Shape and size as existing made out of pre-laminated MDF board of make-Green/Century/Archid for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Sides Left and Right.

Shutters and providing CP Knobs 40mm and drawer lock 4 lever to the shutter.

Drawers and CP knob 40mm.

Back of 6mm thick commercial plywood of make-Globe/Green/Archid

Legs made of first class teak wood seasoned.

M & L for applying two coats of best quality french polish on the side board after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Chair Dining (FD-279 ) : Taking out old unsv components of Chair Dining and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Front legs

Rear legs

Front rails

Side rails

Back rails

Back rest

Stiffeners

M & L for applying two coats of best quality french polish to chair dining after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Chair Easy (FD-229) : Taking out old unsv components of Chair Easy and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Front legs

Rear legs

Side rails

Front rails

Back rest

M & L for applying two coats of best quality french polish to the chair easy after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Stool Dressing (FD-282) : Taking out old unsv components of Stool dressing and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Long rails

Short rails

Stiffeners

M & L for applying two coats of best quality french polish to the stool dressing after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Chair Writing (FD-280) : Taking out old unsv components of Chair Writing and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Front legs

Rear legs

Front rails

Side rails

Back rails

Back rest

Stiffeners

M & L for applying two coats of best quality french polish to the chair writing after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Chair Easy, Dining, Writing and Stool Dressing (FD-229, 279, 280 & 282) :Removing of old unsv plastic cane and M & L for re-canning of various types chairs and stool dressing etc,with half round plastic cane 2mm wide 0.4mm thick for seat and back, border with 4mm wide 0.5mm thick, finished smooth glossy and edges free from sharp cut complete all as specified and as shown on drawing and as directed by Engr-in-charge.

Chair Dining Offrs (FD/MAP-II/04 ) : Taking out old unsv components of Chair Dining Offrs and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Front legs

Rear legs

Front rails

Side rails

Back rails

Back rest

Cushion seat alongwith approved coloured fabric

Supply and fixing new tapestry cloth cover with seat duly stitched (Tapestry cloth not less than Rs.290/- per mtr) colour and pattern etc complete all as specified and as directed by Engr-in-charge :-

Stiffeners

M & L for applying two coats of best quality french polish to the chair dining offrs after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Chair Dining JCOS/ORs (FD/MAP-II/05) : Taking out old unsv components of Chair Dining JCOs/ORs and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Front legs

Rear legs

Front rails

Side rails

Back rails

Back rest

Stiffeners

PVC seat

M & L for applying two coats of best quality french polish to the chair dining JCOs/ORs after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge :-

Charpoy GI Pipe with plywood top (FD-220) : Taking out old unsv components from charpoy GI pipe and S & F new components as per existing shape & size for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Top of 12 mm thick ply wood commercial of make-Globe/Green/Archid

MS plate 50x5mm thick & 900mm long painted with two coats of black paint over a coat of red oxide primer.

Long rails made out of GI pipe 32 mm dia, medium grade, as per existing shape and size and making necessary threads on both ends complete all as specified and shown on drawing and as directed.

(d) Fixing only short rails (converted from retrieved long rails) of charpoy GI pipe including necessary cutting, threading, complete all as specified and as directed (Note : GI pipe retrieved from item No 27.03 above shall be re-used under this item)

(e) Fixing only legs (converted from retrieved short rails) of charpoy GI pipe made out of 32mm dia GI pipe with necessary cutting, threading and welding FI clamp two Nos etc. complete all as specified and as directed. (Note : GI pipe retrieved from item No 27.04 above shall be re-used under this item)

3 way GI elbow (ISI marked) suitable for 32mm bore GI pipe.

Check nut 6mm thick suitable for 32mm bore GI pipe.

Hard rubber shoes with inside steel washers for legs.

M & L for applying a coat of synthetic enamel black paint GI Pipe, flat iron after preparation of surfaces etc complete all as specified and as directed by Engr-in-charge :-

Table bed side (FD/E6/MAP/15®) : Taking out old unsv components of Table bed side and S & F new components in replacement as per Shape and size as existing for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Front leg made out of 20mm dia steel square tube of wall thickness 1.6 mm.

Rear leg & top rail made out of 20mm dia steel square tube of wall thickness 1.6 mm.

Hard rubber shoes with inside steel washers for legs.

Drawers made out of 18mm thick pre-laminated MDF board on fron side and plywood sides and bottom including telescopic channels & CP handle 100mm.

Side made out of 18mm thick pre-laminated MDF board.

Top made out of 18mm thick pre-laminated MDF board and providing 4 mm thick Teakwood beading.

M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint black etc complete all as specified and as directed by Engr-in-charge :-

Table dining 1200x900mm (FD/MAP-II/03) : Taking out old unsv components of Table Dinning 120x90cm and S& F new components as per Shape and size as existing made out of well seasoned 1st class teak hard wood for the following items etc complete all as specified and shown on drawing and as directed by Engr-in-charge :-

Top made out of 18mm thick pre-laminated MDF board teak faced of make-Green/Century/Archid and providing teak wood beading 4mm thick all around the top includig fixing of 8 Nos FI bracket 25x3mm to joning corner of rails and legs for each table

Long Rails

Short Rails

M & L for applying two coats of best quality french polish to the table dining of size 1200x900mm after preparation of old surfaces etc complete all as specified and as directed by Engr-in-charge.

SHRI MADAN SINGH

SHRI HRIDAY NARAIN GIRI

M/S BIJOYA LAXMI ENTERPRISE

SHRI VIKASHE ZHIMOMI