CPPP

Technical BO

Works

Miscellaneous Works

Forming Tie-Up with experienced Design Engineering Associate through MoU for Pre-Bid Engineering Services and Post-Bid Construction Engineering Services for Hydrogen Storage Bullets on an EPC Basis

Bridge and Roof Company (India) Limited

Green Ammonia Project, ParadIp | Khordha, Odisha

Amount: Refer DocsCloses: 17 Aug 202613 Aug 2026Closed

Timeline

Published3 Aug 2026
Closed17 Aug 2026
Technical Evaluation18 Aug 2026
Award—

Bids

1 Bid18 Aug 2026

#	Company	Status
1	Petrocon Engineers and Consultants Admitted-Technical 5TH FLOOR PUNJA BUILDINGS ABOVE SRIRAM SANITARY MG ROAD DHAKSHINA KANNADA DAKSHINA KANNADA KARNATAKA 575003 \| DAKSHINA KANNADA \| KARNATAKA \| 575003	Admitted-Technical

Corrigenda

Corrigendum

1 updatesLatest on 12 Aug 2026Submission Ends:13 Aug 202617 Aug 2026

Date changes

Download Ends13 Aug 202617 Aug 2026Submission Ends13 Aug 202617 Aug 2026Bid Opening14 Aug 202618 Aug 2026

Tender Value

Refer Docs

EMD Value

₹4 L

Closing Date

17 Aug 2026, 4:00 pmClosed

Tender Inviting Organisation

Name

Group General Manager (EAST)

Address

Bridge and Roof Co. (India) Ltd Kankaria Centre (4TH/5th Floor) 2/1 Russel Street Kolkata 700 071

Work Description

Forming Tie-Up with experienced Design Engineering Associate through MoU for Pre-Bid Engineering Services and Post-Bid Construction Engineering Services for Hydrogen Storage Bullets on an EPC Basis

Tender Information

Tender ID

2026_BandR_920242_1

Reference Number

BandR/EAST/PBTU/ HYDROGEN STORAGE BULLET /ACME/NIT/01

Tender Type

Open Tender

Product Category

Miscellaneous Works

Form of Contract

Works

Period of Work

187 days

Location

Green Ammonia Project, ParadIp

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer to Tender Document for Detail

Documents Required

25 documents required · 25 mandatory

Fee

RequiredScanned Copy of Tender Fee ( Copy Of DD / Bankers Cheque/P.O/ Online payment receipt ) (.pdf)

RequiredScanned Copy of EMD in the form of DD/ Pay Order / Bankers cheque / BG (.pdf)

RequiredDGS and D/SSI/NSIC/MSME Registered Party (copy to be enclosed ) (.pdf)

PreQual

RequiredScan Copy of Agreemnts W.O/P.O/L.O.I related Completion Certificates,Certified Last RABill,Final Bil (.pdf)

RequiredScanned Copy of Deeds/Affidavit/agreement for Fully Equipped Owned/Hired/Leased Workshop/Fabrication (.pdf)

RequiredScanned Copy of Deeds (in case of partnership firm) / Memorandum and Article of Association (.pdf)

RequiredScanned Copy of Audited Balance Sheet(s) along with Turnover Certificate duly signed by ( CA ) (.pdf)

RequiredScanned Copy PAN,PF,ESI,GST,latest files monthly /quarterly GSTR -3B return as GST clearance certif (.pdf)

RequiredScanned Copy of Current Income Tax Return filling acknowledgement (.pdf)

RequiredScanned Copy of Undertaking regarding ligation / arbitration ( Annexure-IX) (.pdf)

RequiredScanned Copy of Land border sharing format Appendix-X (.pdf)

RequiredScanned Copy of Power of Attorney in favour of person who has signed the Bid on non judicial stamp (.pdf)

RequiredScanned Copy of letter of submission on bidders letter head ( Annexure-IV ) (.pdf)

Technical Bid

RequiredScanned Copy of Affidavit cum declaration - Annexure-VI. (.pdf)

RequiredScanned Copy of declaration for confirming the knowledge of site conditions - Annexure-VII (.pdf)

RequiredScanned Copy of Affidavit of self certification regarding minimum local content - Annexure-VIII. (.pdf)

RequiredScanned Copy of Techno-commercial clarifications on major points- ( Appendix -III ) (.pdf)

RequiredScanned Copy of No Deviation certificate in Bidders letter head. - ( Appendix-IV) (.pdf)

RequiredScanned Copy of Integrity Pact- Appendix-VIII (.pdf)

RequiredScanned Copy of Format for declaration against technical specifications- Appendix-IX (.pdf)

RequiredScanned Copy Accepted and signed tender document (.pdf)

RequiredALL OTHER ANNEXURE (.pdf)

RequiredALL Other Important Documents if any (.pdf)

RequiredALL OTHER APPENDIX (.pdf)

Finance

RequiredFinancial Bid / PRICE BID (.xls)

Fee & Financial Details

Tender Fee Amount

₹4,720

Tender Fee Exemption Allowed

Yes

Tender Fee Payable To

Bridge and Roof Co.India Ltd

EMD Fee Amount

₹4 L

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

18 Aug 2026

Published

3 Aug 2026

Bid Opening

18 Aug 2026

Download Starts

3 Aug 2026

Download Ends

17 Aug 2026

Submission Starts

5 Aug 2026

Clarification Period

3 Aug 2026 - 7 Aug 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (5 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
0.1	PRE-BID ENGINEERING SERVICES AND POST-BID CONSTRUCTION ENGINEERING SERVICES	-	-	-	-
1	Design, Engineering And Development Af Detail Fabrication Drawings For Hydrogen Storage Bullet including Civil foundation and associated facilities, Safety Studies, Specifications for Procurement, GADs, Smart 3D Model, Engineering fabrication drawings, Procurement & Construction schemes, Electrical & Instrumentation System studies, Statutory approval from various Statutory State & Central Government bodies, approval of drawings & documents from Owner/PMC, submission of final technical documents, As Builts documents and 3D Model, Pre-commissioning, Commissioning and Operating Manuals for Package as Per Scope of works and Bidding Document requirements.	1	LS	-	-
1.1	( CONTINUE FROM ABOVE 1.00 ) Pre-Bid Engineering Services The Design Consultant shall provide all engineering support necessary for successful bid submission, including but not limited to: • Review of tender specifications, drawings and scope of work. • Identification of technical deviations and preparation of deviation schedules. • Preparation of BOQ and engineering quantities. • Technical support for estimation and costing. • Preparation/review of technical offer. • Clarifications during the pre-bid stage. • Participation in technical discussions with the Client, if required. • Any other activity to be carried out for submission of tender to Client.	-	-	-	-
1.2	( CONTINUE FROM ABOVE 1.10 ) Post-Bid Construction Engineering Services In the event of award of the contract, the Design Consultant shall provide complete engineering support throughout project execution, including: • Design and engineering of Hydrogen storage bullet including Civil Foundation. • Preparation of design calculations. • Preparation of General Arrangement Drawings. • Preparation of fabrication drawings. • Civil, structural and foundation drawings. • Design calculations for wind, seismic, anchorage, nozzle loading and thermal effects. • Development of P & ID & PFD • Preparation of the Thermal/hydraulic /datasheets, preparation of control philosophy, and operating and trip logic system. • The Engineering contractor shall extensively use latest design software including 3D Modelling with PDS/PDMS software /SP3D	-	-	-	-
1.3	( CONTINUE FROM ABOVE 1.20 ) •Review and approval support for vendor documents. • Resolution of Client/PMC comments. • Construction engineering support. • Site engineering assistance. • Technical support during fabrication, erection, hydrotest and commissioning. • Assistance for statutory approvals, wherever applicable. • Preparation of as-built engineering documentation. • Pre-commissioning and Commissioning Assistance. • Performance Guarantee and Guarantee for Utility Consumption if required • Training of Owners personnel if required • Operation and maintenance manual. • PESO/CCOE/SIL Classification & Verification / LOPA study • Safety Studies including HAZAN study, HAZOP study • Purchasing / Subscribing to the latest softwares required for carrying out the design and engineering works and to fulfill the requirements of the client’s bid specification. • Any other activity to be carried out for successful completion of the work relevant to the scope of the consultant.	-	-	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.01 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.05 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.42 MB

Work Item Documents

Annexure_D.xls

Additional Documents • 0.08 MB

Commercial Section.zip

Additional Documents • 6.55 MB

ITB Index.xlsx

Additional Documents • 0.02 MB

Technical Section.zip

Additional Documents • 5.47 MB

BOQ_967057.xls

BOQ • 0.36 MB

eNIT_PBTU_MOUNTED_BULLET_PARADIP.pdf

Tender Documents • 1.03 MB

Corrigendum Documents

CORRIGENDUM_1_HYDROGEN_STORAGE_BULLET.pdf

PDF • 0.08 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Petrocon Engineers and Consultants

Admitted-Technical

5TH FLOOR PUNJA BUILDINGS ABOVE SRIRAM SANITARY MG ROAD DHAKSHINA KANNADA DAKSHINA KANNADA KARNATAKA 575003 | DAKSHINA KANNADA | KARNATAKA | 575003

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

0.1

PRE-BID ENGINEERING SERVICES AND POST-BID CONSTRUCTION ENGINEERING SERVICES

Design, Engineering And Development Af Detail Fabrication Drawings For Hydrogen Storage Bullet including Civil foundation and associated facilities, Safety Studies, Specifications for Procurement, GADs, Smart 3D Model, Engineering fabrication drawings, Procurement & Construction schemes, Electrical & Instrumentation System studies, Statutory approval from various Statutory State & Central Government bodies, approval of drawings & documents from Owner/PMC, submission of final technical documents, As Builts documents and 3D Model, Pre-commissioning, Commissioning and Operating Manuals for Package as Per Scope of works and Bidding Document requirements.

1.1

( CONTINUE FROM ABOVE 1.00 ) Pre-Bid Engineering Services The Design Consultant shall provide all engineering support necessary for successful bid submission, including but not limited to: • Review of tender specifications, drawings and scope of work. • Identification of technical deviations and preparation of deviation schedules. • Preparation of BOQ and engineering quantities. • Technical support for estimation and costing. • Preparation/review of technical offer. • Clarifications during the pre-bid stage. • Participation in technical discussions with the Client, if required. • Any other activity to be carried out for submission of tender to Client.

1.2

( CONTINUE FROM ABOVE 1.10 ) Post-Bid Construction Engineering Services In the event of award of the contract, the Design Consultant shall provide complete engineering support throughout project execution, including: • Design and engineering of Hydrogen storage bullet including Civil Foundation. • Preparation of design calculations. • Preparation of General Arrangement Drawings. • Preparation of fabrication drawings. • Civil, structural and foundation drawings. • Design calculations for wind, seismic, anchorage, nozzle loading and thermal effects. • Development of P & ID & PFD • Preparation of the Thermal/hydraulic /datasheets, preparation of control philosophy, and operating and trip logic system. • The Engineering contractor shall extensively use latest design software including 3D Modelling with PDS/PDMS software /SP3D

1.3

( CONTINUE FROM ABOVE 1.20 ) •Review and approval support for vendor documents. • Resolution of Client/PMC comments. • Construction engineering support. • Site engineering assistance. • Technical support during fabrication, erection, hydrotest and commissioning. • Assistance for statutory approvals, wherever applicable. • Preparation of as-built engineering documentation. • Pre-commissioning and Commissioning Assistance. • Performance Guarantee and Guarantee for Utility Consumption if required • Training of Owners personnel if required • Operation and maintenance manual. • PESO/CCOE/SIL Classification & Verification / LOPA study • Safety Studies including HAZAN study, HAZOP study • Purchasing / Subscribing to the latest softwares required for carrying out the design and engineering works and to fulfill the requirements of the client’s bid specification. • Any other activity to be carried out for successful completion of the work relevant to the scope of the consultant.