Repair and maintenance work of Dabhel PHC and Bhimpore PHC.

Amount

Civil work

Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint of Asian Apex or equivalent on wall surface (two coats) and priming coat as per the requirement to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials etc. complete as directed.

Providing and applying Asian or Equivalent make Damp proof weather coat paint two or more coats and priming coat wherever required including cleaning and scraping the surface etc. complete as directed.

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.5 mm thick with zinc coating not less than 275 gm/ m2.

Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (D) In trussses and trussed purlins, upto 25 M. span and 15 M ovarall height. (upto 10 ton)

P & L 24" x 24" vitrified 8 mm thick tile over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring/dedo or steps etc. and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade (upto 10 ton)

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper site, laying in uniform layer and compacting to achieve the desired density, complete as directed by enginer incharge.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing and fixing aluminum work for partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. :Providing material and labour charge for fixing POWDER COATED ALLUMINIUM PARTITION with Pipe section 63mm x 38mm x 1.63 mm including glazing clips and 25mm x 25mm x 1.80 mm having cross section C/C not more than 0.5 x 1.00 meter and Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge with Frosted/Clear Glass Planes of 6.0mm thickness and/or 4mm Thick ACP Sheet of color as approved by engineer-incharge fitting with rubber gasket and other fixture and fastening etc. complete as directed by Engineer in charge.

SHIV SHAKTI CONSTRUCTION (BID ID -8587)