Fitment of Counters, Display racks and allied civil works

Amount

Providing and fixing Front/Intermediate and service counter with 19mm plywood BWP IS 710 Marine grade Laminated with 1mm thick on all exposed areas with all accessories (Handles, locks, telescopic channel etc) including cost of materials, tools and labours and as per the direction of Engineer-in-charge.

Providing and fixing 2 Nos. Back Display Rack of size 3.8m x 0.6 x 2.8 m and 1 No Back Display Rack of size 2.5m x 0.6 m x 2.8m with Aluminium section and 19 mm plywood BWP IS 710 Marine grade Laminated with 1mm thick on all exposed areas with all accessories including cost of materials, tools and labours and as per the direction of Engineer-in-charge.

Providing supplying and fixing of following LED Display Board of material ACP with Acrylic and background light at Mathura IMFL shop and as per the direction of Engineer in charge

ANIIDCO WINE SHOP with letter height of 30 cm & "REGULAR COUNTER" with letter height of 20 cm in single board

Providing and fixing spot Light including cost of materials, tools and labours etc. as per the direction of Engineer-in-charge.

Providing and fixing 6 mm thick GRID false ceiling with Galvanized steel sections consisting of main T runner, wall angle, GI Slotted cleats, clips etc including cutting making opening for services like light fittings, Fixtures, etc wherever required for all heights as directed by engineer in charge.

Supplying of A.C Ceiling fan and switch type electronic fan regulator (1200 -1400 mm sweep) i/c down rod of standard length 30 cm with all accessories as required. Make: Usha/Bajaj/Orient/ Crompton or equivalent to ISI standard

Providing and fixing LED bulb 18W

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification.

Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

DURGA ENTERPRISES