REPAIRS TO CERTAIN B/R WORKS, WELCOME MAINT, PERIODICAL SERVICES TO MD ACCN AND OTM ACCN AT KALINA, SANTACRUZ AND TECH AREA OF AIRPORT AT AF STATION MUMBAI UNDER GE(AF)THANE

Amount

M&L for complete removal of existing treatment of wall surfaces, apply two coats of oil bound distemper over chalk whiting on plastered surfaces, preparatory to distempering complete all as specified and as directed by Engr-in-Charge. Note :- (a) Chalk whiting shall be measured and paid saperately.

M&L for chalk whiting on plastered surfaces, preparatory to distempering on wall surface complete all as specified and as directed by Engr-in-Charge. .

M&L for preparing old plastered surface of wall including washing, rubbing down and stopping of distempered and painted surfaces, apply one coat of oil bound distemper of existing shade or tint complete all as specified and as directed by Engr-in-Charge..

M & L for preparation of old decorated surfaces of ceiling etc and applying one coat of washable Oil bound distemper complete all as specified and as directed by Engr-in-Charge..

M&L for preparation of old decorated steel surfaces and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge..

M&L for preparation of old painted surfaces as in eaves gutter and pipes any description, n.exc.60cm girth including holder bats, distance pieces, etc. (length measured over bends, branches etc.) and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old decorated wooden surfaces and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

Preparation of old surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots , removing nails etc., and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Litres/10sqm over and including priming coat of exterior primer applied @ 0.90 Ltr / 10sqm over surfaces with and including provision of scaffolding required for the treatment to external surfaces of building with required safety measures etc complete complete all as specified and as directed by Engineer in charge. Note :- (a) Rate shall be include all required height scaffolding upto 20m height of building all safety measures etc to be taken by the contractor and completed as directed by Engr-In-Charge.

M&L for obliterating old writing of any description , n exc 0.1 sq.m, with paint to match existing work complete all as specified and as directed by Engr-in-Charge.

M&L for writing letters or figures (Block,Roman,Italic or Indian) n exc 30cm high complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls,ceiling etc including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 5mm thick in CM 1:3 as in ceiling complete all as specified and as directed by Engr-in-Charge.

M & L for 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonary wall, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for 15 mm thick cement plaster on stone or concrete surfaces in CM 1:4 mixed with liquid water proofing compound @ 200ML/Bag of cement including 20m height steel scaffolding complete all as specified and as directed by Engr-in-Charge.. Note :- (a) WPC shall be measured and paid separately (b) Rate shall be include all required height scaffolding upto 20m height of building all safety measures etc as directed by Engr-In-Charge.

Supply of liquid water proofing compound .

M&L for Preparing new plastered surfaces of ceiling, priming plastered and other surfaces with alkali resistant priming paint, and applying two coat of oil emulsion distemper as on ceiling complete all as specified and as directed by Engr-in-Charge.

M&L for applying two coats of oil bound distemper over a coat of primer on previously untreated surfaces of wall including preparation complete all as specified and as directed by Engr-in-Charge..

M&L for preparing new plaster surfaces of walls applying for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Litres/10sqm over and including priming coat of exterior primer applied @ 0.90 Ltr / 10sqm over new surfaces and directed including 20m height steel scaffolding complete all as specified by GE/Engineer-in-Charge Make : Asian Paint Apex, Berger weather coat or equivalent Note :- (a) Rate shall be include all required height scaffolding upto 20m height of building all safety measures etc as directed by Engr-In-Charge. (b) Preparation of surfaces & acrylic emulsion painting will be carried out by authorised applicator of the Company as approved by GE.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces in Camouflage pattern complete all as specified and as directed by Engr-in-Charge.. Note :- (a) Rate shall be include all required height scaffolding upto 20m height of building all safety measures etc as directed by Engr-In-Charge. (b) Preparation of surfaces & acrylic emulsion paintings in camouflage pattern will be carried out by authorised applicator of the Company as approved by GE.

M&L complete removal of existing treatment on surface of wall etc in any position washing down with water and clearing the surface from all loose dirt, chalk, grease, fungi, algal, flakes etc, and applying two coats of weather proof acrylic paint over a coat of weather proof primer in camouflage pattern complete all as specified and as directed by Engr-in-Charge. Note :- (a) Rate shall be include all required height scaffolding upto 20m height of building all safety measures etc as directed by Engr-In-Charge. (b) Preparation of surfaces & acrylic emulsion paintings in camouflage pattern will be carried out by authorised applicator of the Company as approved by GE.

M/L for application of smart care damp proof course applied in patch work at different locations in piecemeal manner for wall , ceiling , chajjas , CB portion, slabs , wall crack portions as in vertical /horizontal surfaces including preparation of surfaces making dirt free surface by wire brush and application of two coats of damp proof paint to stop leakage and seepage of from external surface of make Asian or equivalent as directed including necessary scaffolding, ladder and required T&P etc completed and as directed by Engr in charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and removing debris outside MoD land. Note :- Removing of electric switches & sockets boards carefully and refixing in without damage to the same position, no extra cost will be paid on this account.

M&L for 25 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor complete all as specified and as directed by Engr-in-Charge.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in floor & skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with C M 1:6 as approved by Engr-In-Charge complete all as specified and as directed by Engr-in-Charge.

M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors & skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with C M 1:6 as approved by Engr-In-Charge complete all as specified and as directed by Engr-in-Charge.

M&L for Glazed ceramic coloured tiles in vertical surfaces of size 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering backing coat on vertical surface of wall in 10mm thick CM 1:3 to receive wall tiles complete all as specified and as directed by Engr-in-Charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 as approved by Engr-In-Charge complete all as specified and as directed by Engr-in-Charge.

M & L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engr-in-Charge..

M & L for 20mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engr-in-Charge..

M&L preparation of concrete surfaces by removing loose concrete dust, dirt etc. Cleaning the surface properly and applying one liberal coat of epoxy bounding agent (two component agent) by brush application to parent concrete complete in patch work as directed on various locations all as per manufacturer instruction and directed by Engr-in-Charge. Quoted rates are inclusive of scaffolding and formwork costs ,complete all as specified and as directed by Engr-in-Charge.

M&L 40mm thick (average thickness) polymer modified single component alkaline resistant fibre reinforced, thixotropic, cementitious patch repair mortar on concrete structure. Applying the mortar around the reinforcement and finishing to bring it in line with existing concrete surface complete in patch work as directed on various locations all as manufacturer instructions and directed by the Engr-in-Charge. Cured mortar should exhibit compressive strength of 20 MPa after 1 day and atleast 45 MPa after 28 days, tensile strength atleast 2.5 MPa after 28 days and flexural strength atleast 7 MPa after 28 days. Quoted rates to include scaffolding and formwork costs Make : FOSROC/ SIKA OR EQUIVALENT

Taking down chowkats or frame exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) ,complete all as specified and as directed by Engr-in-Charge.

Taking down shutters only of any description exc 1sqm and n exc 2 sqm each ,complete all as specified and as directed by Engr-in-Charge.

S&F for pressed steel frames of sizes 125x60mm for doors with one or more rebates including necessary fixing lugs,hinge,lock strike olate etc ,complete all as specified and as directed by Engr-in-Charge.

S&F 30 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides ,complete all as specified and as directed by Engr-in-Charge.

S&F 30mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) and fitted to chowkats, complete all as specified and as directed by Engr-in-Charge.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.14 mm fixed with stainless steel wire staple, complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new surfaces of wood exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and as directed by Engr-in-Charge.

S&F door sliding bolt aldrop 300 mm long aluminium anodised Make-classic/Shalimar etc equivalent ISI Marked, complete all as specified and as directed by Engr-in-Charge.

S&Fin repair mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-in-Charge.

M&L for 25 x 3mm FI holdfasts complete all as specified and as directed by Engr-in-Charge.

Cutting holes in brick walls built in cement mortar depth of embedded portion of hold fast or lugs measured from the face of the jamb in to the wall exc half brick wall but n. exc one brick wall for in surting hold fasts and making good complete all as specified and as directed by Engr-in-Charge.

S&F butt hinges heavy weight cold rolled mild steel of size 100 mm by welding to existing frame including taking down old hinges complete all as specified and as directed by Engr-in-Charge.

S&F 150 mm size of handle extruded aluminium alloy handle fabricated type anodised complete all as specified and as directed by Engr-in-Charge.

S&F aluminium anodized, 150mm length of bolt barrel tower bolts of extruded section complete all as specified and as directed by Engr-in-Charge.

S&F floor door stoppers of aluminium alloy body and tongue anodized with hard drawn steel spring over all length 140mm complete all as specified and as directed by Engr-in-Charge..

Resecuring without taking down chowkhats or frames exc 1.50 sqm but n exc 4 sqm each complete all as specified and as directed by Engr-in-Charge.

Re-securing or easing and adjusting without taking down shutters of any description and size complete all as specified and as directed by Engr-in-Charge.

S&F in repairs powder coated aluminium frames incl sliding tracks, etc for doors, windows, ventilators, partitions with one or more rebates including jointing cleats for fixing, fittings like hinges, handles and locks, etc all as specified and directed by Engineer – in- charge”

S&F Neoprene/ EPDM rubber gasket for aluminium frame for windows, Ventilators etc ,completecomplete all as specified and as directed by Engr-in-Charge.

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.14 mm fixed with stainless steel wire staple complete all as specified and as directed by Engr-in-Charge.

Hacking out old broken glass of any thickness, size, quality or description from metal /wooden frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones etc complete all as specified and as directed by Engr-in-Charge.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lapping in square not exc 0.50 Sqm each in each pane complete all as specified and as directed by Engr-in-Charge.

All as per item 53 here-in-before but with 3 mm thick figured glass, complete all as specified and as directed by Engr-in-Charge.

S & f in repairs door closer aluminium (*extruded section) body hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engr-in-Charge..

S & F in repairs floor door stopper of aluminium alloy body 150 mm length, and tounge, anodised, with hard drawn steel spring , fixed in floor complete all as specified and as directed by Engr-in-Charge.

S & F in repairs Mortice lock with two levers (vertical type), brass body 100 mm length of latch and fixed complete all as specified and as directed by Engr-in-Charge.

M & L in repairs for Plywood 18mm thick grade BWR type BB fixed with screws to timber frame ,Al frame etc complete all as specified and as directed by Engr-in-Charge.

Supply only for decorative Laminate type 1 of any thickness of surface finish, colour and pattern as approved, fixed with approved adhesive on plywood as per manufacturer instruction and as directed by Engr-in-Charge.

S&F in repairs brass mortice lock, vertical type, size 100 mm , 4 levers with 2 keys complete all as specified and as directed by Engr-in-Charge.

Extra over rates for external teak wood lipping 6 mm thick fixed with nails complete all as specified and as directed by Engr-in-Charge.

M & L in repairs (wooden ) fillet work using 2nd class hard wood exc 6 & n. exc 13 sq.cm fixed with screw, plane fillet square, rectangle in section clean swan, secured with nails or brads complete all as specified and as directed by Engr-in-Charge.

Magnetic catches for cupboard doors No.2 complete all as specified and as directed by Engr-in-Charge.

M & L in repairs stainless steel 'L' shape soft closing spring hinges for cabinets shutters complete all as specified and directed by Engr-in-Charge

M & l in repairs GI push and pull channel brand of size 20"(51 CM) length for modular cabinets complete all as specified and directed by Engr-in-Charge

S & F in repairs Rim latch (125 mm size of latch) with two levers of brass body stone enamelled finish , with brass knob or lever handle and fixed complete all as specified and as directed by Engr-in-Charge.

S & F in repairs aluminium anodised barrel towel bolts of extruded section of length 150 mm including taking down old unserviceable barrel tower bolts complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 300 mm Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections including taking down old sliding door bolt complete all as specified and as directed by Engr-in-Charge.

S & F in repair 300 mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-in-Charge.

S & F in repairs aluminium extruded alloy handles fabricated type anodised of size 150 mm including taking down old handles complete all as specified and as directed by Engr-in-Charge.

S & F in repairs hasp and staple safety type of size 100 mm of aluminium anodized including taking down old hasp and staple complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished complete all as specified and as directed by Engr-in-Charge.

M & L in repairs for fixing 6 mm thick plywood fixed with screw incl necessary cutting and waste complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Brass chromium plated tubular towel rail 20mm dia & 60cm long between flanges complete all as specified and as directed by Engineer-In-Charge.

S & F in repairs aluminium anodised brackets powder coated to match with rod for curtain rod of 20mm dia complete all as specified and as directed by Engr-in-Charge.

S & F in repairs stainless steel butt hinges medium weight SS of size 100 mm by welding to existing frame including taking down old hinges complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminium frame work all as specified and as directed by Engr-in-Charge.

S & F in repairs JG Company Vanity Mirror Cabinet for Washbasin | Premium Wall Mounted Storage Cabinet Bathroom with Door | Multipurpose Bathroom Cabinet Rack with Mirror (White) size 54D x 35W x 12H Centimetres, Wall Mount , Plastic etc complete all as specified and as directed by Engr-in-Charge..

Cleaning of PVC tank of capacity exc 250 Ltrs and up to and including 500 Ltrs by flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with concentrated hydrochloric acid or caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 Metre and depositing complete all as specified and as directed by Engr-in-Charge.

All as per item No 80 here-in-above but capacity of tank exc 500 Ltrs and up to and including 1000 Ltrs complete all as specified and as directed by Engr-in-Charge.

All as per item No 80 here-in-above but capacity of tank exc 1000 Ltrs and up to and including 2000 Ltrs complete all as specified and as directed by Engr-in-Charge.

Fixing only float valve upto 25mm bore obtained from dismantling complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 15 mm size bib tap cast copper alloy, chromium plated fancy type screwed down, with capston head, screwed for iron pipe complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 15 mm size pillar taps, cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 15 mm size pillar taps swan neck , cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 15 mm size stop valve or angle valve cast copper alloy, chromium plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 15 mm size stop valve with long shank (concealed type) cast copper alloy, chromium plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union complete all as specified and as directed by Engr-in-Charge.

S & F 20 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve complete all as specified and as directed by Engr-in-Charge.

S&F 15 mm size stop valve of PTMT any colour high pressure screwed for iron pipe, weight not less than 90 gms, including taking down old stop valve complete all as specified and as directed by Engr-in-Charge.

S & F PVC connection 15 mm size with PTMT nuts on both end, length 450 mm, including taking down old PVC connection complete all as specified and as directed by Engr-in-Charge.

S & F PVC connection 15 mm size with PTMT nuts on both end, length 600 mm, including taking down old PVC connection complete all as specified and as directed by Engr-in-Charge.

S&F 15 mm size brass chromium plated shower rose 125 mm dia with or without / swivel joints, fixed in position including taking down old shower rose complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 10 Ltr capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float and handle, fixed in position and connecting including taking down old cistern complete all as specified and as directed by Engr-in-Charge.

S&F vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as 15 mm CP pillar cock fancy type, CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces, including taking down old wash hand basin complete all as specified and as directed by Engr-in-Charge.

S&F plastic water closet seat cover, white or black colour closed pattern with flat bottom including taking down old seat cover complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs 15 mm size wall mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising bib tap with all connected accessories, fixed complete all as specified and as directed by Engr-in-Charge.

Supply and laying in repairs 16 mm outer diameter CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engr-in-Charge.

Supply and laying in repairs 20 mm outer diameter CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs 32 mm size waste coupling of PTMT for wash hand basin / urinal / sink complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs 40 mm size waste coupling of PTMT for wash hand basin / urinal / sink complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs Health Faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete in complete all as specified and as directed by Engr-in-Charge.

S & F in repairs sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified and as directed by Engr-in-Charge.

S & F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers; including waste coupling with pipe, bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460mm bowl size 410mmx330mmx 160mm all as specified and directed by Engr-in-Charge. Make : Nirali/ Prayag/ equivalent as approved by GE.

S & F in repairs S&F Stainless steel plate rack , 0.5mm to 1mm thick having size (900 x 760 x 230 mm ) including fixing on wall with brackets etc complete all as specified and as directed by Engr-in-Charge.

S & F in repairs Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed by Engr-in-Charge.

S&F Soap dish, vitreous china white approximate size 160x160x90mm complete all as specified and as directed by Engr-in-Charge.

S & F in repairs PVC 110 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall, complete all as specified and as directed by Engr-in-Charge.

S & F in repairs PVC (SWR) bends 110mm bore any radius complete all as specified and as directed by Engr-in-Charge.

S & F in repairs PVC 110mm bore (SWR) coupler complete all as specified and as directed by Engr-in-Charge.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed by Engr-in-Charge.

S&F PVC (SWR) bend 75mm bore any radius with access door complete all as specified and as directed by Engr-in-Charge.

S&F PVC (SWR) 75mm diameter out let in mm floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engr-in-Charge.

S&F PVC(SWR) 75mm bore in mm vent cowl complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 15 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 20 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm complete all as specified and as directed by Engr-in-Charge.

S & F in repairs tubular towel rail, aluminium anodised 20mm dia D type 60 CM long between flanges complete all as specified and as directed by Engr-in-Charge.

M & L for repairing of steel rolling shutter by taking down for necessary repair work and refixing /secured in its original position the same after repair ( size of each shutter n.exc.3.00 m wide and 3.10 m height) after servicing , greesing,oiling etc replacement of ball bearing, greasing in jammed parts/portion , spare parts , necessary welding as directed, complete all as specified and as directed by Engr-in-Charge.

S & F in repairs for Steel rolling shutters, 1mm thick of laths without ball bearing ,as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box and crank handle complete all as specified and as directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting,any gauge,thickness, including Nainital or similar pattern roof covering is any position all as specified and removing them outside MoD Land complete all as specified and as directed by Engr-in-Charge.

S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified etc using necessary scaffolding upto height 20m complete all as specified and as directed by Engr-in-Charge.

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof ridge covering, fixed with self tapping screws using necessary scaffolding upto height 20m complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 6mm thick polycarbonate double layered sheets of approved shades fixed over roof trusses,wall ,gates etc fixed with self tapped screw, complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or crank hook bolt in lieu of screw using necessary scaffolding upto height 15m as specified and directed complete all as specified and as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed by Engr-in-Charge.

S & F for Steel work in tubular trusses and similar works including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240,etc for ornamental and intricate design for Height of building max 20m) complete all as specified and as directed by Engr-in-Charge.

S & F for Plates (plain ) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment, Fe 410-W (Gde-E-250) quality-A,flat iron, etc with ornamental and intricate design complete all as specified and as directed by Engr-in-Charge.

M&L for Preparation of new steel surface not otherwise described and applying two coats of Aluminium paint over a coat aluminium red oxide primer complete all as specified and as directed by Engr-in-Charge.

M & L for welding in repairs to roof truss,rafters, purlins,steel gates/ windows / doors exc 2.5 cm but not exc 5.00 cm in length and thickness of metal to be welded exc 9 mm but n exc 20 mm [height of roof truss, rafter / perlins 12m to 15 m] complete all as specified and as directed by Engr-in-Charge.

S & F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia pipe complete all as specified and as directed by Engr-in-Charge..

Dismantling of wall and ceiling boards (PVC solid wall panelling, fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillet complete all as specified and as directed by Engr-in-Charge..

S & F PVC False ceiling 6mm thick solid EPS stuck to 1mm printed PVC sheet, grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and as directed by Engr-in-Charge.

M&L in repairs for Anodised aluminium snap grid frame work of size (605mm*605mm ) for false ceiling complete all as specified and as directed by Engr-in-Charge.

M&L in repairs for Hangers 6mm dia. G.I. (upto 1200 mm length) size of grid (605mm*605mm ) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I.Flat 40*3 mm size 60 mm long and expansion hold fasteners 12.50mm dia. 40mm long complete all as specified and as directed by Engr-in-Charge.

S & F solid PVC wall lining consisting of 5mm thick prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed by Engr-in-Charge.

S & F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of wall fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level) and removing debris outside MoD land, complete all as specified and as directed by Engr-in-Charge.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection finishing even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.

Note :- 1.The contractor shall deploy skilled tradesman i.e. carpenter, plumber , mason , welder etc with his helper all workers need to be having latest police verification for Airport entry (MIAL) and required T&P. Preparation of Entry Passes from MIAL will be responsibility of the Contractor, 2. After Periodical service of the Qtr/building the contractor will clean all the paint marks from glass panes , electric switch boards and fittings , doors windows and should clean the floor , dado and all scraped material shall thrown away. 3. Debris and waste construction materials should be removed immediately after the execution the work outside the MoD land.

S K ENTERPRISES (BID ID -3389171)

Genius Construction Co. (BID ID -3384290)