CA NO GE/H/ T-46/ 2025-26 REPAIR/ MAINT OF ROAD FURNITURE AND POT HOLES IN AHRR COMPLEX UNDER GE E/M RR HOSP. DELHI CANTT-10

Supply and fixing retro-reflective road sign boards made of 3 mm thick aluminium sheet 1.5x1.5 m with engineering grade reflective sheeting, supported on MS angle iron post 65×65×6 mm, embedded in PCC 1:2:4 (40 cm × 40 cm × 80 cm) complete all as specified and directed.

S&F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x125mmx25mm (shank 65mm) of high efficiency Mono rystafic solar panel 2.4V/0.3 watt one NI-ed rechargable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instruction etc all as specified and directed.

Supply and fixing solar powered road studs with shank, inbuilt rechargeable battery and LEDs, suitable for night visibility complete all as specified and directed by Engr-in-Charge.

Supply and fixing metal tubular delineators made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600mm height duly powder coated including embedding in PCC 1:2:4 (150 X 150 X 300mm) type B1 complete all as specified and directed by Engr-in-Charge.

Supply and fixing speed breaker (rubber type), 500 mm length,250- 300 mm width,30- 50 mm height, with retro reflective panels, fixed with bolts and epoxy complete all as specified and directed by Engr-in-Charge.

Painting of kerb stones in alternate black & white stripes, two coats synthetic enamel paint over one coat primer complete all as specified and directed by Engr-in-Charge.

Supply and fixing Convex Mirror, 800 mm dia, polycarbonate body with reflective film, fixed on GI pipe post of 65 mm dia embedded in PCC 1:2:4 block (450×450×800 mm) complete all as specified and directed by Engr-in-Charge.

Supply and fixing Speed Limit Boards (retro-reflective), 600 mm circular 3 mm thick aluminium composite panel with a high intensity prismatic reflective sheet, mounted on GI post 65 mm dia, embedded in PCC 1:2:4 block 1:2:4 block (450×450×800 mm) complete all as specified and directed by Engr-in-Charge.

Material and labour for repair to pot holes any depth, not exc one sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25mm in depth, making good by applying take coat @ 5 kg per 10 sqm, putting in pre-mixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 sqm , blinded with 0.09 cum of stone chipping , 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings ) and compacted to required camber and gradient with 8 to 12 Tonne power road roller, depth of pot holes exc 30mm complete all as specified and as directed by the Engr-in-Charge.

Supply, installation, testing & commissioning of Radar-Based Speed Detection System with high-brightness outdoor LED Digital Display Board (minimum 3-digit speed display), detection range up to 150 m, speed measurement accuracy ±1 km/h, IP65 weatherproof enclosure, suitable for 230V AC supply complete with mounting pole, foundation, wiring, controller, all accessories and commissioning RCC foundation for mounting pole including excavation, PCC, reinforcement, anchor bolts and finishing complete.Supply & laying of XLPE armoured cable, GI pipe protection, termination and testing complete. Installation, testing, commissioning and operator training complete included in quoted rate directed by Engineer-in-Charge. NOTE- Mild Steel Pole.Height above Ground Level: 6.0 m. Overall Length: 7.2 m (including embedment).Pole Type: Octagonal or Circular Tapered.Bottom Diameter: 150 mm. Top Diameter: 80-100 mm.Wall Thickness: 3 mm. Foundation Excavation: 900 mm × 900 mm × 1800 mm deep. PCC Bed: 100 mm thick PCC (1:4:8) using 40 mm graded stone aggregate. RCC Foundation Block: 800 mm × 800 mm × 1700 mm in M15 grade concrete.