Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.8 LAccepted-AOC GHURDEVA BANKIMONGARA KORBA CG PIN 495447 | BANKIMONGARA | KORBA | CHHATTISGARH | 495447 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | Rejected-Technical Q NO 1C 2 JAMUNA COLLIERY ANUPPUR MP | JAMUNA COLLIERY | ANUPPUR | MADHYA PRADESH | 484444 | - | Rejected-Technical Not evaluated not being L1 Bidder | |
| 3 | Rejected-Technical PLOT NO 242 NEAR MEERA APARTMENT M P NAGAR ZONE II BHOPAL M P | BHOPAL | BHOPAL | MADHYA PRADESH | 462011 | - | Rejected-Technical Not evaluated not being L1 Bidder | |
| 4 | Rejected-Technical WARD NO 07 AMADAND PO MALGA DISTT ANUPPUR MADHYA PRADESH PIN 484446 | AMADAND | ANUPPUR | MADHYA PRADESH | 484446 | - | Rejected-Technical Not evaluated not being L1 Bidder |
Tender Value
₹6.0 L
EMD Value
₹7,600
Closing Date
14 Mar 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Staff Officer (Civil), SECL, JK Area
Office of The Staff Officer (Civil), Jamuna Kotma Area, District Anuppur, Madhya Pradesh, 484444 Contact No. 9425531831, Email Address - civil.jamunakotma(at)gmail.com.
Drilling and Construction of 1 No. Piezometer at AOCP of Jamuna Kotma Area
2023_SECL_273108_1
SECL/JK/SO(C)/ETED/22-23/94 Dated 02/03/2023
Open Tender
Civil Works - Others
Item Rate
90 days
AOCP, Jamuna Kotma Area
PLEASE REFER TENDER DOCUMENTS.
3 documents required · 3 mandatory
₹7,600
6 May 2023
3 Mar 2023
16 Mar 2023
3 Mar 2023
14 Mar 2023
4 Mar 2023
3 Mar 2023 - 7 Mar 2023
Amount
Preparatory work for carrying out drilling work (including surface dressing , making channel including mobilisation & demobilisation.
Drilling of borehole of required diameter compress in all kind of soil. (300mm diameter).
Supply, Assembling, Lowering of ERW FE 410 Plain Casing Pipe of 150 mm diameter.
Supply, Assembling, Lowering of ERW FE 410 Slotted Casing Pipe of 150 mm diameter.
Providing & fixing of bail plug 150mm dia complete.
Development of well using compressed air from suitable air compressor Complete.
Providing & fixing suitable size mild steel cap (150mm diameter).
Providing and filling of pea size gravel (quartz) of 3 - 5 mm diameter into annular space of well 300/150 mm.
Providing sand pack (2 m) to prevent entry of the cement slurry from cement sealing into gravel pack and for separating two aquifer zones after gravel pack into annular space of well.
Providing bentonite sealing (2 m) to prevent entry of the groundwater from top aquifer into piezometer.
Providing cement sealing (2 m) to prevent entry of the groundwater from top aquifer into piezometer.
Providing clay filling above cement seal up to ground level but below sanitary seal to prevent entry of the surface and sewage water at top.
Construction of cement concrete platform (1:2:4) for protection of casing pipe i/c cost of excavation, concrete all complete as per direction of engineer-in-charge, (size of platform 2.00 mm diameter & 150 mm thick concrete with plaster & neat cement punning).
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).
Brick work with fly ash bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand).
Brick work with fly ash bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand).
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand).
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer: Using M.S. angels 40x40x6 mm for diagonal braces.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete: 40 mm thick with 20 mm nominal size stone aggregate.
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification: Two or more coats on new work.
Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing with lime.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Hot rolled deformed bars.
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete: Fixed to steel windows by welding.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes: 110 mm diameter.
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion: Bend 87.5° : 110 mm bend.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform.
Total Impact of GST for The Purpose of CTC
SHRI SITA RAM AGENCY
SHRI SIDDHIVINAYAK ENTERPRISES
R.K. Singh
stage.html
html • 0.04 MB
techsummary_282899.pdf
PDF • 1.42 MB
finsummary_282899.pdf
PDF • 1.15 MB
LOINo04SatishAgrawal.pdf
PDF • 1.37 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .