Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.4 LAccepted-AOC | L1 | Accepted-AOC Being First Lowest | |
| 2 | L2₹19.7 L+₹2.7 L (16.2%)Rejected-Finance | L2 | Rejected-Finance Other Than First Lowest | |
| 3 | L3₹20.0 L+₹3.0 L (17.6%)Rejected-Finance | L3 | Rejected-Finance Other Than First Lowest | |
| 4 | L4₹20.0 L+₹3.0 L (17.7%)Rejected-Finance C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L4 | Rejected-Finance Other Than First Lowest | |
| 5 | L5₹20.3 L+₹3.4 L (19.8%)Rejected-Finance | L5 | Rejected-Finance Other Than First Lowest |
Tender Value
Refer Docs
EMD Value
₹51,000
Closing Date
17 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lalgarh Jattan
GE Lalgarh Jattan
SPL REPAIR TO BLDG NO P-01 (MI ROOM) AT LGJ MIL STN
2022_MES_564172_1
8933-51/22-23
Open Tender
Civil Works
Item Rate
180 days
GE Lalgarh Jattan
As per tender document
8 documents required · 8 mandatory
₹500
GE Lalgarh Jattan
₹51,000
Yes
10 Jan 2023
19 Nov 2022
19 Dec 2022
19 Nov 2022
17 Dec 2022
3 Dec 2022
Amount
B/R Portion Demolition of cement concrete of any description (unreinforced) and in any position not otherwise specially provided for complete all as specified and directed by Engr-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engr-in-charge.
M&L for vitrified ceramic coloured tiles 7 to 8 mm thick (square/rectangular) light shade, polished, area of each tile n exc 0.36 sqm over and including 15mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engr-in-charge.
M&L for glazed ceramic coloured tiles of size 450 x 300 x 7 mm thick on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engr-in-charge.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-in-charge.
Demolition of reinforced cement concrete of any description and in any position not otherwise specificlly provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engr-in-charge.
Formwork to chajjas, troughs and similar items including edges, for rough surface of concrete, complete all as specified and directed by Engineer-in-charge
M&L for reinforced cement concrete 1:1.5:3 type A-1 using 20mm graded stone aggregrate in Chajjas complete all as specified and directed by Engr-in-charge. Note : Reinforcement shall be measured and paid seperately.
S&F mild steel TMT bars(Fe-500D) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clip complete all as specified and directed by Engr-in-charge.
Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engr-in-charge.
M&L for rendering, 10 mm thick on brick work or concrete surfaces in cement mortar 1:6 on wall finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for rendering, 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 on wall finished even and fair including mixing of WPC in mortar complete all as specified and directed by Engr-in-charge. Note : WPC shall be measured and paid seperately
Supply only integrated water proofing compound complete all as specified and directed.
M&L for rendering, 5 mm thick on brick work or concrete surfaces in cement mortar 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L washed stone grit plaster on exterior walls in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand : 2 stone chipping 10mm nominal size) (using white cement in place or ordinary cement in the top laayer) in panels with groove all around as per approved pattern incuding scrubbing and washing, the top layer with bruses and water to expose the stone chippings complete all as specified and directed by Engr-in-charge. (Note :- payment for providing groovs shall be made separately)
M&L forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, naild to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specification and direction of the Engineer-in-Charge.
Providing and Applying rising damp proof coating system with single component ready to use damp proof coating Roff Hydamp 1. Preparation :- Throughly brush and clean all laitance, loose particles such as dirt, grease, mortar droppings, release agents, efflorescence, bird droppings, etc all large voids and hallow portions must be removed and re-plastered non moving cracks having width upto 5mm must be filled with polymer based crack filler. 2. Application :- Apply the first coat of Dr. fixit dampguard classic with a paint brush directly on the prepared surfaces by mixing (1 part base : 1 part hardner : 1 part of water), allow to dry for a minimum 2-3 hrs. apply one part of Dampguard mixed chemical and 2 parts of OPC white cement / Birla putty and make the putty, apply putty on the entire surface area, allow to dry for at least 3-4 hrs, apply the final coat of air cure 48 hrs proceeds for paints.
M&L for two coats of acrylic distemper over 3mm thick wall care putty on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-charge.
M&L for complete removal of existing treatment and two coats of acrylic distemper over 3 mm thick wall care putty on plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-charge.
M&L for 3 coats of white wash on newly plastered surfaces incl preparation etc. on Wall complete all as specified and directed by Engr-in-charge..
M&L for two coats of white wash on old plastered surfaces incl preparation etc. on wall complete all as specified and directed by Engr-in-charge..
M&L for three coats of white wash on new plastered surfaces incl preparation etc. on ceiling complete all as specified and directed by Engr-in-charge..
M&L for two coats of white wash on old plastered surfaces incl preparation etc. on ceiling complete all as specified and directed by Engr-in-charge..
M&L for two coats of cement base paint on newly plastered surfaces incl preparation etc. wall complete all as specified and directed by Engr-in-charge.
M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed.
Dismantling of brick tiles in floor laid dry and pointed in cement morter complete all as specified and as directed by engineer-in-Charge.
Demolition mud in roofs, any thickness, including plastering and leeping complete all as specified and as directed by engineer-in-Charge.
M&L for Roof treatment to RCC roof as follows:- (a) Cleaning the roof surfaces thoroughly using wire brusehes to remove sharp projections, cleaning joints, washing, drying and removing all dirt/dust to receive concrete padding/plaster etc. (b) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:4) with WPC, finished even and smooth without using extra cement. (c) Providing one coat of approved bituminous primer @100 gms per sqm, over dried plastered surface. (d) Laying 3 mm thick APP membrane,(mineral finish) reinforced with non woven polyster fabric, by torch application. The overlapping while torching shall be 75 mm on longitudinal direction and 100 mm on the transverse direction complete all as specified and directed by E-in-Charge. Make : STP Dr Fixit/Pidilite, Texsa India Ltd/Tikitar Dansona/Bengal Bitumen Notes : (i) All joints and change in directions should be covered wih cement mortar (1:3) mixed with SBR latex @ 200 ml/bag of cement/as per site reqmt and cured well before laying membrane by torching. (ii) All angles and abuttments should be sealed well with extra care to ensure full bondage. (iii) Water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only. The name of firm shall be got approved from GE before carrying out the wk. (iv) The independent testing of membrane for technical parameters given in particular specifications shall be carried out from Govt approved labs having fascilities for testing of membrane. (v) The guarnatee of treatment shall be for min 10 yrs reckoned from date of completion of whole wk.
M&L PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in roof kerbs or mud stops, and like rounded or chamfered on edges including necessary form work etc complete all as specified & directed by Engr-in-Charge.
Material and labour for repair to damage RCC coloumns/Beam/Slab/Chajja by using micro mortar and concrete in Following Stages :- (a) Removing the mortar and loose concrete from RCC elements. (b) Cleaning the rusted reinforcements and applying rust removal. (c) Inserting the addl reinforcements in cape the coves sectional area reduction in more than 20 percent welding the reinforcement with existing area and supporting adequate on walls if reqiurd with grout. (d) Providing micro morter and concrete over bond coat to cover the reinforcements and slet surface. (e) Providing adequate from wave and scaffolding if required. (f) Curing the surface. Note :- (i) Rust removal, bonding agent, grout, micro morter and concrete and related chemicals shall be of Dr Fixit/BASF and STP (ii) Work is to be got executed from authorised applications and company. (iii) Steel measured and paid separately
Taking down Aluminium chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-charge.
Taking down Aluminium chowkhats or frames exc 1.5 sq. m but n.exc 4.0 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-charge.
Taking down existing shutter and refixing in same opening shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified and directed by Engr-in-charge. (Note:- 'Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.)
S&F powder coated aluminium frame/shutter for doors, windows, ventilators and aluminium partition with one or more rebates including jointing cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete with locking arrangements for fixing with powder coating on aluminium sections, minimum thickness of poweder coating shall be 50 micron as per the specification. The top and bottom horizontal members and vertical members adjacent to wall shall be fixed with floor, ceiling, walls and cills where required and fixed with the help of rawl plugs and screws or with fixing clips or with expansion hold plate fastners. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically whereever required complete in all respect all as specified & directed by Engr-in-Charge. Make of Al Section : Jindal / Hindalco / NALCO
S & F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining celeats, glazing clipe, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing exc 0.55 Kg/m (1.50 to1.80mm thick) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (01 No) hinges type B-21 100 mm long (2 nos suitable handle (01 No) in each window shultter and necessary accessary as required complete all as specified and directed by Engr-in-Charge. (Note : Glass will measured and paid separately)
S & F for 4.8 mm thick sheet glass ordinary quality and glazing with aluminium snap beading of any size of glass in each pane with solar control film 25 micron reflective type sticked to glass panes as per intructions of manufacturers complete all as specified & directed
S & F powder coated standard aluminium anodised grill size of mesh 75 mm x 75 mm and 8 mm thick section using U channel 25 x 12 mm all as specified and directed
S & F mortic lock, vertical type size 100 mm brass 4 levers all as specified and directed
S & F door closer Aluminium (Die cast) body hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
Supply and fixing of Fibre glass Reinforced plastic (FRP) door frame of required built in colour in three legged of cross-section 90mm x 45mm having single ribate of 32mm x 15mm to recieve shutter of 30mm thick including laminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat(CSM) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood in all three legs frame shall be covered with fibreglass from all sides MS stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in- charge.
Supply and fixing of 30 mm thick glass fibre reinforced plastic (FRP) paneled doorshutter conferming to IS:14856-2000 of required colour and made with fire retardant grade unsaturated polyster resin,moulded to 3mm thick FRP laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings,cast molithically with 5mm thick FRP laminated for panels including fixing to frames,complete all as specified and as directed by Engineer-in- charge.
M & L for framed work as in chowkates of doors windows of angle or other section with gusset plates, rails, braces, etc., conoforming to Gde Fe 410 -W or Gde- Fe- 250 quality-A complete all as specified and directed by Engineer-in Charge.
S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anosied and fixed type B-21 complete all as specified and directed by Engr-in-charge.
S&F 200 mm long aluminium anodised barrel tower bolt, of extruded sections complete all as specified and directed by Engr-in-charge.
S&F 125 mm long aluminium anodised handle, cast type complete all as specified and directed by Engr-in-charge.
S&F for 300mm long aluminium alloy, anodised, sliding door bolt type not less than 16mm dia fixed complete all as specified and directed by Engr-in-charge.
S&F stainless steel wire cloth 0.63 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-charge.
,---ditto--- all as per Ser itim No 50 above but fixed in repairs
S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed by Engr-in-charge.
M & L preparation of old painted wooden surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint all as specified
S&F in repair drapery stainless steel rods, standrad quality, not less than 25mm dia with heads at both ends and middle support, rings, etc. complete all as specified and directed by Engr-in-charge.
S&F in repair brass hat pegs, solid body, 125 mm to 175 mm (4 legs) complete all as specified and directed by Engr-in-charge.
S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with integral foot rests (excl flushing cistern) but including CI 'P' trap set in and including concrete fixed complete all as specified and directed by Engr-in-charge.
S&F in repair, shower rose, 125 mm size, brass chromium plated with sweivel joint complete all as specified and directed by Engr-in-charge.
S & F in repair vitrieous china wash down WC (Pedestal pattern) white and flush piple including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc., complete all specified
S & F in repair CP toilet paper holder of vitreious china fixed to wall with chromium plated (CP) brass screws
S & F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chormium plated or aluminised hinging device, seat and cover for water closet (European type) complete all as specified.
S&F in repairs PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float, handle and telescopic pipe and connection to pipe and flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed by Engr-in-charge.
S&F in repair vitreous china wash hand basin coloured Flat back of size 550x400mm, long screwed shank fly nut flange end including cutting for and pinning in ends of brackets in 1:3 CM including 32mm dia chromium plated waste coupling/trap complete all as specified and directed by Engr-in-charge.
S & F in repairs Vitreous China urinals, half style (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.
S&F in repair bib tap 15mm bore cast copper alloy chromium plated long body fancy type with capston head and cup screwed down, hand operated, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-charge.
S & F in repair bib tap 2-way double handle with flange, fancy type, cast copper alloy chromium plated, with crutch or butterfly handles, screwed dowm, screwed for iron pipeor for brass ferrule & fixed suitable for 15 mm bore iron pipe complete all as specified & directed by Engineer- in - charge Note : the minimum weight of tap shall be as given in SSR or in relevant IS
S & F in repair angle valve/stop cock/stop valve fancy type, cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, size 15 mm bore compelte, all as specified & directed by Engineer-in- charge Note : the minimum weigth of tap shall be as given in SSR or in relevant IS
S 7 F in repair chromium plated fancy type health faucet with 1 mtr tube & hook complete all as specified and directed by Engineer-in -charge
S&F in repair stainless steel chromium plated jet spray (butter fly or ''L'' bend) suitable for EWC including 1m tube and necessary nut bolts complete all as specified and as directed by Engineer-in-charge.
S&F in repair brass chromium plated Liquid soap dispenser including fixing to 15mm bore pipe complete all as specified and as directed by Engineer-in-charge.
S&F in repair corner glass shelf 200mm with Abs brackets complete all as specified and directed by Engineer-in-Charge.
S&F in repair chromium plated fancy type soap dish complete all as specified and directed by Engineer-in-Charge
S&F in repair stainless steel Trap with grating round or square 150mm size (minimum weight 100gms) complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engr-in-charge.
S&F in repair towel rails 20 mm dia, 'D' type 600mm long brass chromium plated superior quality brass chromium plated fancy type complete complete all as specified and directed by Engr-in-charge.
Dismantling of water tanks of capacity exc 500 and n.exc 1000 ltrs and removing from site complete all as specified and directed by Engr-in-charge.
S&F rotational moulded polythene water storage tank 500 ltr capacity vertical with closed top, white in colour, hoisted and fixed in position all as specified in SSR part-I. complete all as specified and directed by Engr-in-charge.
S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore fixed in repair complete all as specified and directed by Engr-in-charge.
S&F in repair ball brass valves, high pressure of PTMT with epoxy coated aluminium rod & high-desity plastic ball scewed for iron pipe and fixed (Minimum weight 20 mm -210 gms) complete. fixed in 20 mm dia bore pipe all as specified and directed
Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position including cleaning for re fixing the serviceable pipecomplete all as specified and directed by Engr-in-charge.
,---ditto-- all as per serial item No 81 above but 20mm dia pipe complete all as specified and directed by Engr-in-charge..
S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.
,---ditto-- all as per item No 83 above but fixing only
,---ditto-- all as per item No 83 above but 20mm dia pipe complete all as specified and directed by Engr-in-charge.
Excavation in trenches n.exc. 1.5 mtr wide and , n exc 1.5 m in depth for foundation etc and n.exc. 10 Sqm on plan and not exceeding 1.5 m in depth & getting out in Soft/loose soil for foundation, shafts, cesspit, manholes, pier holes etc complete all as specified and directed by Engineer-in-Charge.
Removal of excavate surplus spoil to a distance n.exc 50 m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer- in- charge
M&L for PCC 1:2:4 type B1 using 20mm graded aggregates as in benching / haunchig of manholes including forming channels including necessary formwork etc. complete all as specified and directed by Engineer-in-charge.
M&L for PCC 1:2:4 type B1 using 20mm graded aggregates as in coping and the like including weatjeromg.slightly rounded or chamfered angles and throating, as directed including necessary formwork etc. complete all as specified and directed by Engineer-in-charge.
M&L precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and set cement mortar 1:6 as in cover slabs (for manholes etc,) chajjas, shelves and similar articles with plain faces complete all as specified and directed by Engineer-in-charge.
M&L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by Engineer-in-charge.
Supply and laying DWCPE (SN8) drain pipes 150mm inner dia as per IS-16098 (Part-II), laid in trenches on moorum bed to required slope, including all assessories / fittings, jointing and tested complete all as specified and as directed by Engineer-in-Charge.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
S&F mineral fibre accoustical suspended ceiling system with ANF (Micro look) EGE tiles with silhouette exposed grid. Colour shall lbe white, fire performance class 0/class 1 (BS 476) in module size of 600mm x 600mm x 15mm with bioblock coating on the face of tiles. Suitable for green building application with recycle content of 63%. The tiles shall be laid on silhouette profile grid system with 15mm with flanges incorporating 6mm central revel in white / black colour and with a web height of 45mm and and load carrying capacity of minimum 15.68 kg/Sqm. Silhouette, main runner and cross runner shall have mitred end and birdsmouth notches to provides mitred juction. The Tee section have a galvanised of 125 gms/Sqm complete all as specified and directed by Engr-in-Charge.
Surface excavation not exceeding 30 cm depth and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.
Returning filling in, including spreading levelling, watering and Well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge. .
M&L precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in kerb stones size 300 mm x 300 mm x 100 mm with plain fari face, including chamfers, weathering, throating etc setting in CM 1:4 complete all as specified and directed by Engineer-in-charge.
M&L for 100 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base below floors complete all as specified and as directed by Engr-in-Charge.
M&L Machined pressed precast concrete interlocking paver block glossy with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with over Fazilka sand cushion all as specified and directed. (Sand will be measured and paid seperatly)
Suply only Fine aggregate (sand) for Cushioning (Fazilka sand) all as specified and directed
Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and tabing out of trenches if required any size complete all as specified and as directed by engineer-in-Charge.
Supply & fixing 100 mm bore cast iron pipe waste and vent pipe in any length with or without ears laid in trenches/floor/wall including clamps, jointing with necessary coupling complete all as specified & directed by Engr-in-charge. Make:- NECO
S&F in repairs cast iron type P trap/CPWD floor trap 100mm bore with CP grating including jointing to waste pipe fixed with necessary coupling arrangement complete all as specified and directed by Engineer-in-charge. Make:- NECO
S&F in repair 100mm bore cast iron type door T equal/uneqal branch pieces (any radius) diminishing pieces or tapers (larger bore measured) door fixed with necessary coupling complete all as specified and directed by Engineer-in-charge. Make :- NECO
S&F in repair 100mm bore cast iron type plain bends (any radius) dimining pieces or tapers (larger bore measured) door fixed with necessary coupling complete all as specified and directed by Engr-in-Charge. Make:- NECO
Supply only 100 mm bore sheilding (ss) coupling (with EPDM rubber as per requirement complete all as specified and directed by Engineer-in-charge. Make:- NECO
Supply & fixing 75 mm bore cast iron pipe waste and vent pipe in any length with or without ears laid in trenches/floor/wall including clamps, jointing with necessary coupling complete all as specified & directed by Engr-in-charge. Make:- NECO
S&F in repairs cast iron type P trap/CPWD floor trap 75 mm bore with CP grating including jointing to waste pipe fixed with necessary coupling arrangement complete all as specified and directed by Engineer-in-charge. Make:- NECO
S&F in repair 75mm bore cast iron type door T equal/uneqal branch pieces (any radius) diminishing pieces or tapers (larger bore measured) door fixed with necessary coupling complete all as specified and directed by Engineer-in-charge. Make :- NECO
S&F in repair 75mm bore cast iron type plain bends (any radius) dimining pieces or tapers (larger bore measured) door fixed with necessary coupling complete all as specified and directed by Engr-in-Charge. Make:- NECO
Supply only 75 mm bore sheilding (ss) coupling (with epdm rubber as per requirement complete all as specified and directed by Engineer-in-charge. Make:- NECO
M&L for brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engineer-in-charge.
Supply & fixed Clamp for hanging/ fixed of 75mm/100mm pipes complete all as specified and directed by Engineer-in-charge.
E/M PORTION Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulators, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces complete all as specified and directed by Engr-in-Charge.
Taking down MCB with sheet metal enclosure, main switch, DB etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed by Engr-in-Charge.
Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engr-in-Charge.
M&L for concealed Point wiring with two single core PVC insulate, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with modular sheet top cover of required module for mounting switches, sockets etc complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour for One Light point controlled by one, one way switch complete all as specified and directed by Engr-in-Charge. .
,--ditto--- all as per serial item No 117 above, but for One ceiling/exhaust fan point controlled by one switch and regulator complete all as specified and directed by Engr-in-Charge.
,--ditto--- all as per Serial item No 117 above, but for One 3 pin 5 amps switch socket outlet point on same board with other switches complete all as specified and directed by Engr-in-Charge.
,--ditto--- all as per Serial item No 117 above, but for One 3 pin 5 amps switch socket outlet point on independent board complete all as specified and directed by Engr-in-Charge.
,--ditto--- all as per Serial item No 117 above, but for wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 4 sq.mm for 15 amps power point complete all as specified and directed by Engr-in-Charge.
Supply and fix piano switch flush button single pole one way 5/6 Amps complete all as specified and directed by Engineer-in-Charge.
Supply and fix socket outlet 2 in 1, 2/3 pin 6 amp flush type 250 volts AC complete all as specified and directed by Engineer-in-Charge.
Supply and fix socket outlet 2 in 1, 3 pin 5 amp and 15 amp flush type 240 volts AC complete all as specified and directed by Engineer-in-Charge.
Supply and fix piano switch 15 amp flush type 240 volts AC complete all as specified and directed by Engineer-in-Charge.
S & F batton integrated LED light fitting 1 x 20 W integral sleek polycarobonate LED Channel with white acrylic cover to roof/ceiling/wall with necessary wooden/PVC blocks etc and connecting with 2 core flexible PVC insulated multistranded copper conductor from ceiling rose to fitting incl taking out old one complete all as specified and directed by Engineer-in-Charge. Note : (i) With lumen efficiency in excess of 100 lumens par watt and driver efficiency>85% (with pf>0.95) (ii) CRI>80 (iii) The warranty of LED fittings is 02 year after completion of liability period
S&F 2X2 ultra modern designed LED lumaniries LED light fitting 1 X 36 W, 230V LED channel with white acrylic cover including making connection complete all as specified and directed
Supply and fix ceiling rose surface bakelite two to three terminals/plate 5 amps complete all as specified and directed by Engr-in-Charge.
S & F stepped type fan regulator electronic solid state with stepssuitable for 1200/1400mm sweep ceiling fan working on 230V AC complete all as specified and directed by Engr-in-Charge. .
Supply and fix Vertical MCB DB TPN 4 ways double door including MCCB 125 Amp 16 KA as incommer with bus bar rating 200 Amps vertical type dust and vermin proof including fixing on wooden board or recessed on wall complete all as specified and directed by Engr-in-Charge.
Supply and fix sheet metal enclosure DB single pole and neutral for 240 volts 8 way with 200 Amps rated busbar flush/surface mounting double door including wooden board complete all as specified and directed by Engr-in-Charge.
Supply and fix MCB single pole 240 volt 6-32 amps 10 KA, complete all as specified and directed by Engr-in-Charge.
Supply and fix MCB SPN 6-32 amp, 240 volt 10KA complete all as specified and directed by Engr-in-Charge.
Supply and fix MCB SP 40 amp, 240 volt 10KA complete all as specified and directed by Engr-in-Charge.
Supply and fixing PVC Blanking Plates one way with internal lock complete all as specified and directed by Engr-in-Charge.
Material & Labour for Sub Main Wiring with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable with and including 6 Sqmm copper green colour earth wire complete all as specified and directed by Engr-in-Charge. NOTE - Two run of 6 sq.mm & One run of 6 sq.mm & One run of PVC conduit with accessories shall be measured as One length.
Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15mm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts and washers of the earth wire galvaniseed iron or steel and thimbles and other end of the earth wire connected to earthing test point and prortected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:2:4) type B1 and CI cover with frame all as shown in electrical plate No 3 of MES Schedule Part I of SSR 2009 complete all as specified and directed by Engr-in-Charge. Note : (i) 20mm dia GI pipe for watering to be provided with a socket and plug and should be 10cms above ground level (ii) Outer edge of earth pit will be 1 metre away from the outer edge of PCC chamber (iii) GI wire upto DBs earth connection is included in this item (iv) Water pipe should be provided in slanting position.
S&F sheet metal enclosure single pole and neutral with 02 Pin and earth plug and socket complete with 01 single pole 20 Amps 240volts, MCB complete incl necessary fixing arrangement and all incoming and outgoing electric connection complete all as specified and directed by Engr-in-Charge. .
Supply and fix fresh air fan 230 mm sweep 240 vot 50 Hz plastic body complete with louvers and including making hole in wall fixing complete all as specified and directed by Engr-in-Charge.
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
M/s Karan Builders
Dashmesh Construction Company
PAREEK AND COMPANY
ram rattan dass aggarwal
GOYAL ENTERPRISES
M/S Shree Ram Enterprises
KHANNA CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .