Construction of toilet bathroom unit 06 No for Nafri of IRP 12th Guarding Police Complex at Gulshsan Ground Jammu

Amount

Earth work in excavation in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus be excavated soil within a lead of 50M from edge of cutting . disposed earth is to levelled and neatly dressed in all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size) including all carriages and cost of material involved.

Providing and laying in position cement concrete of specified grade excluding C/o centering and shuttering all work upto plinth level in 1:3:6 (1 cement : 3 course sand : 6 stone agg. using 20mm nominal size) including curing complete including all carriages and cost of materials involved.

Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing with all carriages from source to site of work.

Providing and laying Reinforced cement concrete 1:1.5:3 (M-20) (1 Cement: 1.5 coarse sand: 3 graded Stone aggregate 20mm nominal size) in foundations, plinths, plinth beams, lintels, suspended floor, roofs, beams, landings, columns, pillars etc complete excluding cost of centering and shuttering , finishing and reinforcement including cost and carriages of all material involved upto site complete. All works upto floor V- level.

Reinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete. Mild steel and medium tensile steel bars. including all carriages and cost of material involved.

Brick work with FPS bricks of class designation 75-A in super structure up to floor V-level In cement mortar 1:6 (1cement: 6 fine sand). including all carriages and cost of material involved.

Centering and shuttering including strutting, propping etc. and removal of form work for foundation footings, bases of columns, pillar, piers etc. for mass concrete. including all carriages and cost of material involved.

Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers. . including all carriages and cost of material involved.

Centering and shuttering including strutting, propping etc. and removal of form work for suspended floors, roofs, landings, balconies and access platforms. including all carriages and cost of material involved.

Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls under 20cms wide including all carriages and cost of material involved.

12mm to15mm cement plaster on rough side of single or half Brick wall of mix: 1:6 mix (1 cement : 6 fine sand) including all carriages and cost of materials involved.

6mm cement plaster on ceiling of mix: 1:3 mix (1 cement: 3 fine sand) including all carriages and cost of materials involved.

Providing and laying of 50mm thick Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete. Including all carriages and cost of material involved.

Providing / fixing powder coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z- sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C. P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer in charge (including glazing and paneling)for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required including all fittings complete.

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer. including all carriages and cost of material involved.

Finishing walls with exterior emulsion paint of approved brand and manufacture (excel or apex) and of required shade to given an even shade new work two or more coats and including priming coat of exterior primer including all carriages and cost of material involved.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:13753 of minimum thickness 5mm of approved make like NITCO. ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slury @ 3:3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of material.

Providing and fixing C.P. fittings and sanitary ware of approved brand (Jaguar , Cera or equivalent. as directed by EIC).

C P Bib Cock long nose

C P Bib Cock short body

C P Pillar Cock

Wash Basin complete

Waste pipe with coupling

Looking Glass

C P Cup

C P Grating

Soap Dish

Providing and fixing water closet squatting pan ( Indian type W.C. Pan ) with 100 mm sand cast iron P or S trap, 10 litre low level P.V.C flushing cistern ( of approved make) with manually controlled device (handle lever) conforming to IS:7231, with all fittings C.I/M.S. rackets, 32 mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C pan of size 580x440 mm with integral type foot rests.

Providing and fixing of G I pipes with fittings and PVC pipes complete Job (as directed by EIC).

PVC Pipe 4”

PVC Pipe 6”

PVC Bend 4”

PVC Bend 6”

Manhole 1’x1’ with cover

Manhole 1’-5”x1’-5” with cover

Floor trap 3”x4”

Ball valve 20mm

Union 20mm

Tanki Nipple

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (sintex, electroplast, star, lotus or equivalent having valid ISI license. (Three layer)

M/S RAJAN PANDOH CONTRACTOR

CHANDER MOHAN

Anil Gandotra