REPAIR AND MAINTENANCE OF PETTY REPAIR AND EARTHING OF INTERNAL ELECTRIC SUPPLY AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Amount

Note : 1. Contractor need to purchase minimum 50% of all items mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non-availability of materials will be faced. Contractor should ensure during the cause of work that he has minimum 25% of materials with him till the completion of item/date. 2. Contractor should buy the exact items which are given with catalogue reference. Other makes will be approved only by submitting non availability Certificate Company. Contractor need to remove all the dismantled items without delay. 3. Rate quoted for demolition/dismantling /taking down is inclusive of removing the same from site and dumping at given locations anywhere inside station. 4. Contractor will make his own arrangement to store his items. 5. Some places in this contract where the vehicle will not reach the spot directly, the material will be moved manually in these places. The rate quoted will be considered all inclusive on this account. 6. All trade skilled labour required in this contract shall be present daily in working hours, irrespective of complaints received. 7. Complaint for a similar items may be in scattered / different area, quoted rate will be considered all inclusive on this account.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, lamp holders, light fittings etc removing materials and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface as per site requirement complete all as specified and directed by Engr-in-Charge.

Taking down existing unserviceable MCCB/MCB/metal clad sockets (any type and capacity) and making good the disturbed surface of walls including paint touchup to match with the existing surfaces complete all as specified and as directed by the Engineer in charge.

Taking down existing unserviceable distribution board, switch fuse unit, enclosure and making good the disturbed surface of walls including paint touchup to match with the existing surfaces complete all as specified and as directed by the Engineer in charge.

Taking down Existing old unserviceable submain wiring of any description /type size and removal of UNSV material from site and making good the disturbed surface of walls / ceiling so as to match with the existing finishes all as specified and as directed by the Engineer -in- charge .

M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable in accordance with relevant IS with proper colour coding, 1100 volts grade drawn in ISI marked MMS grade PVC casing capping , 1.2 mm thick minimum, 20mm width minimum with double locking arrangement, surface type terminated in sunken type GI sheet metal flush boxes of 16 Gauge (i.e. 1.6mm thickness) including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE FOR ITEM NO.5,6,7, 17, 18 :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. (ii) The decision of casing capping/PVC conduit rests with the Engineer-in-charge.For casing capping, screws of minimum 35x8mm and suitable plugs should be used for fixing. In case of stone walls, wooden gutties shall be grouted in wall for fixing of screws. Distance between 2 screws shall not be more than 600mm. Size of Trunking shall be correct depending on number of wires to be drawn as per SSR Part1 but not less than 20mm. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.

a) One light point controlled by one, 1 way switch

b) One 3 pin 6 Amps socket point controlled by one switch on same board

c) One 3 pin 6 Amps socket point controlled by one switch on independent board

d) One ceiling fan/exhaust fan point controlled by one 1way switch

e) One bell point controlled by one switch

f) One light point controlled by two, 2 way switches

All as per item No. 5 here-in-before but with 2.5 Sqmm for 3 pin 6 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

All as per item No. 5 here-in-before but with 4 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable with proper colour coding, 1100 volts grade drawn in ISI marked MMS non-metallic PVC conduit of size not less than 20mm dia conforming to IS 9537:latest, concealed type terminated in sunken type GI sheet metal flush boxes of 16 Gauge including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE FOR ITEM NO. 8,9,10 :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes and wired conduits to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.

a) One light point controlled by one, 1 way switch

b) One 3 pin 6 Amps socket point controlled by one switch on same board

c) One 3 pin 6 Amps socket point controlled by one switch on independent board

d) One ceiling fan/exhaust fan point controlled by one 1way switch

e) One bell point controlled by one switch

f) One light point controlled by two, 2 way switches

All as per item No. 8 here-in-before but with 2.5 Sqmm for 3 pin 6 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

All as per item No. 8 here-in-before but with 4 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable with proper colour coding as per relevant IS, 1100 volts grade drawn in ISI marked stove enamelled rigid steel conduit of size not less than 20mm dia conforming to IS 9537:II, concealed type terminated in sunken type GI sheet metal flush boxes of 16 Gauge including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (ii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule. (iii) Insulation resistance test: All wiring shall be tested with 500V Meggar between phases, phase – neutral and to Earth. IR value shall not be less than 1M-ohm.

One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

M&L in for point wiring with 1.5 sq.mm FRLSH insulated multistranded copper conductor ,1100 volts grade single core PVC insulated and unsheathed cable drawn through existing concealed steel/PVC conduit upto 32mm including FRLSH, PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor as per proper colour coding and pressed steel terminal boxes made out of 1.6 mm thick MS sheet box with 3mm thick laminated hylam sheet fixed with cadmium plated screws for mounting switches, sockets, fan regulator, etc including all accesories if required making good the disturbed surfaces of walls and paint tuch up to match with the existing surfaces as per site requirement complete all as specified and directed by Engineer-in-Charge.

One light point controlled by one switch

One 3 pin 6 Amps socket point controlled by one switch on same board

One 3 pin 6 Amps socket point controlled by one switch on independent board

One ceiling fan point controlled by one switch and regulator

All as per item No. 12 here-in-before but with 2.5 Sqmm for 3 pin 6 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

All as per item No. 12 here-in-before but with 4 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

M&L for submain wiring along with earth wire with 3 x 4.0 Sqmm FRLSH insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through existing recessed/surface steel/PVC Conduit/casing capping in wall/roof surfaces complete all as specified and directed by Engineer-in-Charge. Note: Three runs of 4.0 Sqmm copper cable and one unit of earth wire shall be measured as one unit length.

All as per item No. 15 here-in-before but with 3 x 6.0 sqmm FRLSH PVC insulated copper conductor cable complete all as specified and directed by Engineer-in-Charge. Note: Three runs of 6.0 Sqmm copper cable and one unit of earth wire shall be measured as one unit length.

M&L for submain wiring alongwith earth wire with 3 x 4.0 Sqmm FRLSH PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including MMS PVC Conduit and its all accessories of suitable size concealed type complete all as specified and directed by Engineer-in-Charge. Note: Three runs of 4.0 Sqmm copper cable and one run of PVC conduit shall be measured as one unit length.

All as per item No. 17 here-in-before but with 3 x 6.0 sqmm FRLSH PVC insulated copper conductor cable complete all as specified and directed by Engineer-in-Charge. Note: Three runs of 6.0 Sqmm copper cable and one run of PVC conduit shall be measured as one unit length.

S&F in replacement of switch piano flush type, single pole one way 6 Amps 240 volts complete all as specified and as directed.

S&F in replacement of switch Modular type single pole one way 6 Amps 240 volts complete all as specified and as directed.

S&F in replacement of switch Modular type single pole one way 16 Amps 240 volts complete all as specified and as directed.

S&F in replacement of bell push,flush type, 6 Amps ,240 Volts ISI marked complete.

M & L in replacement of Call bell, ding dong, AC 240 Volts

S&F in replacement of switch socket combination 2 in 1, 3 pin 6 Amps, flush type, universal ,240 volts complete all as specified and as directed

M & L in replacement of switch socket combination 2 in 1, 3 pin , 6 Amps/16 Amps, flush type,universal,240 volts complete all as specified and as directed

S&F in replacement of stepped type electronic fan regulator 100 Watt, 240 Volt, 50 Hz 2 module size in 5 steps flush type complete all as specified and directed.

S&F in replacement of stepped type electronic fan regulator 100 Watt, 240 Volt, 50 Hz single module size in 5 steps flush type complete all as specified and directed.

S&F in replacement of bell push,modular type, 6 Amps ,240 Volts ISI marked complete.

S&F in replacement of socket 2 in 1, 3 pin 6 Amps, modular type, universal ,240 volts complete all as specified and as directed

S&F in replacement of socket 2 in 1, 3 pin 16 Amps, modular type, universal ,240 volts complete all as specified and as directed

S&F in replacement of stepped type electronic fan regulator 100 Watt, 240 Volt, 50 Hz 2 module size in 5 steps modular type complete all as specified and directed.

S & F in replacement of batten/angle holder, PVC/Polycarbonate type with back plate, 240 V , 50 Hz suitable for batten fittings complete all as specified and directed.

S&F in replacement of ceiling rose 6 A, 3 modular, PVC/polycarbonate ,insulated body 240 Volt , 50 Hz all as specified and as directed.

Supply only electrical flexible conduit 25mm dia, dark grey/white, corrugated , standard length of 25m all as specified and directed by Engineer-in-charge

Suppy only Insulation tape all as specified and directed by Engineer-in-charge

Supply and laying Non-metallic PVC conduit MMS grade conforming to IS 9537:latest, FRLS, dia 20mm including all accessories and hardware complete all as specified and directed by the Engineer-in-charge. Note: Cost of cutting chases shall be measured and paid separately under relevant item of this schedule.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 toends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by the Engineer-in-charge

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and directed by the Engineer-in-charge

Excavation in trenches not exc 1.5 wide and not exc 1.5 mtr deep and getting out in hard /dense soil for laying pipes complete all as specified .

Removal of excavated material to a distance not exc 50 mtr away from starting point and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed .

Returning, and filling in two parts(i) using riddled soil obtain from excavated soil upto depth of 30cm (8cm below cable and remaining above cable) for cushioning of cable and (ii) refilling the trench of remaining depth with normal excavated soil complete in respect all as specified and as direcred by Engr-in-Chrage. Note : (i) Excavated soil shall be riddled by using sieve to seperate composite particles etc as per IS 1255:1983 and refilling in trenches as in cable cushioning.

Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 6 sqmm 4 core ISI marked complete all as specified and directed

Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 10 sqmm 4 core ISI marked complete all as specified and directed

Supply and laying in replacement of Weather proof flat twin core service cable size 2.5 Sq mm copper conductor PVC insulated and PVS sheathed complete all as specified and directed

Supply and laying in replacement of Weather proof flat twin core service cable size 4 Sq mm copper conductor PVC insulated and PVS sheathed complete all as specified and directed

Supply and laying in replacement of Weather proof flat twin core service cable size 6 Sq mm copper conductor PVC insulated and PVS sheathed complete all as specified and directed

Supply and laying in replacement of 2.5 Sqmm, 3 core Pvc Insulated & Sheathed Copper Flexible Cable complete all as specified and directed

S&F MCB Triple pole and Neutral (TPN) of capacity 40-100 Amps 415 volts ,breaking capacity 10 KA,'C' series ,fixed in proper position all as directed by the Engineer in charge .

Supply and fix MCB, SPN, 40-63 Amps, 240 Volts

Supply and fix MCB , SP, 6 - 32 Amps, 240 Volts

Supply and fixing MCCB 125 Amp three pole 415 Volt , breaking capacity 16 KA, with fixed thermal & magnetic setting complete all as specified and as directed by the Engineer in charge.

Supply and fixing MCCB 25-100 Amp Three pole 415 Volt , breaking capacity, 16 KA, with fixed thermal & magnetic setting complete all as specified and as directed by the Engineer in charge.

Supply and Fix in replacement of following items all as specified and directed by Engineer-in-Charge:-

LED driver suitable for 2x2 LED Panel of any company from 36 watt to 42 watt Make Havells/Philips/CG

LED driver suitable for LED Lights of any company from 60 watt to 100 watt Make Havells/Philips/CG

S & F in replacement 20W LED batten tubelight surface/wall mounted with powder coated Aluminium housing, high optically efficient polycarbonate diffuser, inbuilt electronic driver duly wired upto terminal block, luminous efficiency > 100 lm/watt, surge protection upto 4kV, 440V High voltage protection, power factor > 0.95, CRI > 80 including taking down old unserviceable fittings all as specified and directed. Make: Crompton / Havells/Philips/Bajaj

Supply & fixing wall mounted new E-Lite LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 10W LED 6500K (2ft) complete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete including taking down old U/s fittings all as specified and directed by Engineer-in-Charge. Make: Crompton / Havells/Philips/Bajaj

S&F in replacement heavy duty air circulator wall fan 600mm sweep working on 1-ph 230V AC, alloy steel material including taking down the old fan and depositing in stores complete all as specified and directed by Engineer-in-charge

S&F LED light fitting in replacement of ,10 watt bulk head luminaries complete with all accessories and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply & fixing in replacement of high efficacy recess luminaire suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extrured diffuser giving glare free light and good aesthetic appeal 35/36 W LED (2ft X 2ft) complete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of high efficacy recess luminaire Round/box type suitable for high brightness 18 W LED complete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by the Engineer-in-charge

Supply & fixing in replacement of high efficacy surface luminaire Round/box type suitable for high brightness 18 W LED complete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of high efficacy surface luminaire with high brightness LEDs and PMMA extrured diffuser giving glare free light and good aesthetic appeal 35/36 W LED (2ft X 2ft) complete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.

S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete as specified and directed.

S&F Switch flame proof rotary type with termination box in LM6, 16A, double pole 250V complete as specified and directed.

S&F in replacement of Flame proof weather proof LED Tube light fitting CMRI certified recommended for gas/ vapor group IIA and IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass suitable for 1 x 16 Watt (4 feet) LED tube lights, including all accessories such as drivers, tub lights, connector etc complete all as specified.

S&F in replacement of Flame proof weather proof LED Tube light fitting CMRI certified recommended for gas/ vapor group IIA and IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass suitable for 2 x 16 Watt (4 feet) LED tube lights, including all accessories such as drivers, tub lights, connector etc complete all as specified.

Supply and Fixing in replacement of Flameproof cum Waterproof LED Bulk Head light fitting of 40W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed by the Engineer-in-charge

Supply and fix electric water heater, vertical storage type with ferroglass coated anti-rust inner container and heating element upto 2 KW capacity 25 litre, heavy duty anode rod, preset thermal cutout, BEE 5 Star rated as per latest BEE norms (i.e. standing losses ≤ 0.465 kWh/24 hour/45°C which is only valid till 31st Dec 2025, material shall be supplied as per latest revision at the time of supply with all accessories such as safety valve, thermostat, NRV, connection piece(hot and cold water connection pipe) etc including taking down the existing unserviceable geyser and depositing it to MES E/M Store complete complete all as specified and directed by Engr-in-charge.

Supply only Geyser Capillary Thermostat and Cut Out, Capillary Thermostat Suitable for any Geyser 10 to 50 Liter, 230volts, copper and plastic material complete all as specified and directed by the Engineer-in-charge

S&F in replacement Energy saving, environmental friendly, long life , Exclusive innovative die -cast aluminium IP66 flood light luminaire with high power LED as light source 210 W LED with1.5 sqmm 3 core copper/aluminium conductor cable complete with all accessories such as drivers etc. complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Energy saving, environmental friendly, long life , Exclusive innovative die -cast aluminium IP66 flood light luminaire with high power LED as light source 100 W LED with1.5 sqmm 3 core copper/aluminium conductor cable complete with all accessories such as drivers etc. complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Energy saving, environmental friendly, long life , Exclusive innovative die -cast aluminium IP66 flood light luminaire with high power LED as light source 70 W LED with1.5 sqmm 3 core copper/aluminium conductor cable complete with all accessories such as drivers etc. complete all as specified and directed by Engineer-in-Charge.

S&F modular metal flush box 3 module complete including any civil work required to make good the disturbed surface all as specified and directed by Engr-in-charge.

S&F modular metal flush box 4 module complete including any civil work required to make good the disturbed surface all as specified and directed by Engr-in-charge.

S&F modular metal flush box 6 module complete including any civil work required to make good the disturbed surface all as specified and directed by Engr-in-charge.

S&F modular metal flush box 8 module complete including any civil work required to make good the disturbed surface all as specified and directed by Engr-in-charge.

Supply and fixing of modular cover plate white with frame complete for 3 module complete all as specified and directed by Engr-in-charge.

Supply and fixing of modular cover plate white with frame complete for 4 module complete all as specified and directed by Engr-in-charge.

Supply and fixing of modular cover plate white with frame complete for 6 module complete all as specified and directed by Engr-in-charge.

Supply and fixing of modular cover plate white with frame complete for 8 module complete all as specified and directed by Engr-in-charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200/1400 mm sweep. Min air delivery 210/245 CFM with service value 6.00 BEE. Five star rated as per latest BEE norms in vogue at the time of supply with brushless direct current motor (BLDC) including taking down the existing ceiling fans and depositing it to E/M store complete all as specified and directed by Engineer-in-Charge. (as per latest authorization)

Supply and fix in replacement Exhaust fan, steel body AC Single phase 230 V of size 380 mm sweep with blades, and frame and louvers including taking down the existing unserviceable fan and depositing it to MES E/M Store complete all as specified and directed by Engr-in-charge

Supply and fix in replacement Exhaust fan, steel body AC Single phase 230 V of size 225 mm sweep with blades, and frame and louvers including taking down the existing unserviceable fan and depositing it to MES E/M Store complete all as specified and directed by Engr-in-charge

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including taking down the existing unserviceable fan and depositing it to MES E/M Store complete all as specified and directed

All as per item No. 84 here-in-before but with 200mm sweep complete all as specified and directed

Supply only the following parts in replacement of water heater (Electric Geyser) storage type of given make and size complete all as specified and as directed by the Engineer-in Chargre :-

Heating element ISI marked 2000 watt push/thread type circular /triangular base suitable for any make and size. Make - bajaj / Racold

Indicator bulb 240 V suitable for given make, type and model

Supply and fix in replacement distribution board double door type VTPN 8 way sheet steel powder painted with bus bar ,neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement distribution board double door type VTPN 4 way sheet steel powder painted with bus bar ,neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and directed by Engineer-in-Charge.

Supply and fix MCB distribution board single door type SPN 12 way sheet steel powder painted with bus bar ,neutral link & earth bar etc.with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing circuit complete all as specified and directed by Engineer-in-Charge.

All as per item No. 89 above but of SPN 8 way.

All as per item No. 89 above but of SPN 4 way.

Supply and fixing of Capacitor 2.5 MFD in replacement from fixed fan on site all as specified and directed.

Supply and fixing of Capacitor 1 MFD in replacement from fixed fan on site all as specified and directed.

S & F in replacement of louvers with suitable frame work and fixing arrangements for exhaust fan of any size sweep complete including removing the existing unserviceable one all as specified and directed by the Engineer-in-Charge.

S&F in replacement busbar plug-in box 16A, 3phase complete . Make: Legrand Cat No. 75005005 or equivalent approved make Havells/GE Power/ L&T for effective working of lights/fans all as specified and directed by the Engineer-in-charge

Supply and fix 12" gold life smart down rod (Anti suicide fan rod) MS pipe zinc plated, 19mm OD, 1.8+/- 0.05mm thick, spring set grade 3 carbon steel material zinc plated, MSME tested for performance test and opening at impact load of 22 kgf + and spring hidden in pipe will expand to about 1 mtr or more, powder coated white colour for ceiling fans of any size with all accessories complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC casing capping 25x12mm, ISI marked all as specified and directed by the Engineer-in-charge

M&L for cutting round holes suitable for fixing of exhaust fan of size 300 mm into through stone walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 external / internal surfaces and finished to match with the existing surfaces complete all as specified and directed by Engr-in-charge.

Supply and laying PVC wire trunking, self-extinguishing type 75x50 mm, sheet thickness minimum 4mm including coupler plates, elbows, tees, reducers, bolts, nuts, washers and other accessories conforming to NEMA/ASTM/BIS standards complete all as specified and directed by the Engineer in charge

Supply and laying PVC wire trunking, self-extinguishing type 100x50 mm, sheet thickness minimum 4mm including coupler plates, elbows, tees, reducers, bolts, nuts, washers and other accessories conforming to NEMA/ASTM/BIS standards complete all as specified and directed by the Engineer in charge

Supply and fixing of highbay LED lights,150 Watts with PDC housing suitable for ceiling (Surface/Suspended) mounting with system efficacy upto 150 lm/W including clamping the light to the existing metal fixtures of hangar complete all as specified and directed by the Engineer-in-charge. Model No. Havells SAUCERGENXADVPROHBP150WLED857EPWBBORL / CG/Phillips /Bajaj

M & L in replacement of Electric motor suitable for Plastic body Exhaust Fans 225mm sweep, AC 240 Volts from site all as specified and directed.

S & F in replacement earth plug and socket with enclosure, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts as per all as specified and directed.

S & F in replacement Double pole and neutral encolsure with a two pin and earth plug with socket complete with one single pole MCB 20A, 240V complete all as specified and directed by the Engineer-in-charge

S & F in replacement Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 20A, 415V complete all as specified and directed by the Engineer-in-charge

S & F in replacement Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32A, 415V complete all as specified and directed by the Engineer-in-charge

S & F in replacement Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 63A, 415V complete all as specified and directed by the Engineer-in-charge

Servicing of electric geyser including dismantling, checking for leaks, unsual noises, descaling/cleaning of tank, heating rod and thermostat to remove internal sediment buildup, wiping down the exteriors, functionality check followed by post service cleanup complete all as specified and directed by the Engineer-in-charge

Supply only 9 W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz, complete all as specified and directed. Note: Colour shall be at the discretion of the Engineer-in-charge

Supply only electrical panel hylam sheets 3mm thick including cutting for mounting of switches / sockets / of size required as per site requirement complete all as specified and directed.

Supply and fixing of heavy duty hanging bolts set for electric geysers of any size and type, 15mm thick, any length , high quality iron material complete all as specified and directed

Supply and fixing of PVC sticker, water proof, self-adhesive, micro laminated, premium quality digital print, rectangular shape, 5.5x5.5 inch with Do's and Don’t's for usage of electric geysers printed on the sticker complete all as speciifed and directed by the Engineer-in-charge

Supply and fixing in replacement LED building security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection with suitable no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge

M&L for Maintenance free earthing all as per following specification :- a) Copper bonded MS rod with Low carbon steel, high tensile strength ,min 250 microns of copper plating, UL listed, Diameter- 17.2 mm, Length- 3 meters, Approvals- Tested acc. IEC / EN 62561-2, UL 467.Make: Marconite/ DEHN/JEF TECHNO (b) 20 kg backfilled compound, - Material Carbon based backfill/earthing compound, Fulgurite formation test at direct lightning (10/350 μm), lightning long duration test at- 100C No fulgurites/Pass, Environmentally Friendly ROHS certified, Resistivity- < 0.12 ΩM, Complying Standard- IEC 62561-7 , Testing Approvals Certified from- NABL accredited Laboratories. (c) SS 316 grade Termination clamp to terminate the load on earth electrode for termination, Material of construction - 316 grade stainless steel, Dimension - 160x35x3 mm

Note : a) Quoted rate includes testing of earthings and earth results should be less than 1 Ohm. The contractor will be responsible to submit the result sheets to the department along with the locations. b) The GI strip shall be measured and paid separately under relevant item of this BoQ.The electrode and GI strip shall be welded using exothermic welding. c) The quoted rate is deemed to include boring, all necessary earth work, excavation, refilling and making good the excavated surface. d) The contractor must give guarantee for earth resistance of less than 1ohms for a minimum period of 5 years from certified date of completion. e) Alll necessary test certificates and OEM certificate must be submitted within 15days of acceptance.

All as per item above but tripod earthing- 3 electrodes connected to form a grid all as specified and directed by Engineer-in-charge

S&F of 10 inch heavy duty pit cover, Product Code- HEP, Dimensions- 308 mm (L) x 308 mm (W) X 214 mm (H), Weight 2.5 kg (5.50 LBS) all as specified and directed.

M&L for Earth continuity Hot dip GI strip 32X6 mm with saddles and fixing screws etc fixed to wall on batten/porcelain insulator or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing including breazing at each necesasry joints etc.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron or steel earth lead strip 32x6 mm size upto 7.5 mtr long in single length by mean of nut/bolt and washer of galvanized iron or steel as shown in electrical plate no 5 of SSR part I including necessary excavation in hard/dense soil and earth work GI pipe 20mm dia medium grade for watering and GI 15mm dia light grade pipe for protection of GI earth wire etc, PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to LT panel board as indicated including testing complete all as specified and as directed.

Material and Labour for earthing pit display boards made out of 3mm thick MS sheet of size 30 x 35cm welded to 75cm long 25 x 25 x 5 mm thick MS angle iron grouted in PCC 1:3:6 (with 20mm stone aggregate) to a depth of 20 cm and applying two coats of synthetic enamel paint of approved color over a coat of red oxide primer and writing the letters on plate for showing the following details: 1. EARTHING PIT NO : 2. DATE OF MEASUREMENT : 3. NEXT DUE DATE : 4. STANDARD VALUE : 5. VALUE OBTAINED : 6. MEASURED BY : 7. SUPERVISED BY : Note : Shape, size and colour of display board should be approved by Engr in Charge before fixing at site.

Material and labour for repair of earth pit by using liquid chemical earthing solution (not less than 10 Kg) and mixing with water and filling into the chemical earth pit to achieve the result less than 01 to 05 Ohm as required at site.

Supply & Fixing single pointed Air termination rod made of Aluminium Dia 12mm, Height 300mm size over existing RCC roof/AC sheet roof/GI sheet roof etc all as specified and directed.

M&L for porcelain vitreous white seperators and fixing screws etc . to be refixing along with the pole and wall with existing copper strip all as directed by Engr in Charge.

M&L for dismantling of of old damaged /cracked PCC of earth pit and prepare the new Earth pit using PCC 1:2:4 type B-1 with 20 mm graded stone aggregate along with the cover with handle complete all as specified and directed .

M&L in replacement for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw, including taking down unserviceable test point terminal blocks, complete all as specified and directed

Measurement of earth resistance in presence of user, recording the values in Earth resistance test register, obtaining signature from user at locations and as per timelines prescibed by Engineer-incharge. Note: The necessary T&P shall be provided by the contractor to the person carrying out the job.

Mavee Syndicate (BID ID -3503425)

Srinivasa Consructions (BID ID -3493869)

SRI BHAVANI ENTERPRISES (BID ID -3502800)