Restoration of internal streets of Vishal Apartment in Kondli AC-56.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:3 (1 cement : 3 coarse sand).

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100 mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick, 100 mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc including cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA)).

Supplying of fixing of victorian garden bench , both sides of garden bench are made of flora cast iron having back height of minimum 700mm and minimum seating height of 375mm and both sides of garden bench is connected with M.S. tube of 65 mm x 25mm seat angular tube having width of 15.20mm in 10 Nos. for seating purpose with extra support 25mm x 5 mm M.S flats for extra stability all sharp and rough edges of bench are to be grinded with grinder and all fill up with M.S. seal where is it required necessary this bench is having the provision of hold fast system of for growing bench is complete with a cutting Ist class quality paints finally bench is assembled with nut and bolt including all tax. The length of bench be 1500mm and minimum overall weight is not less than 90 kgs. Fitting and transporation at site.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sanid and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.