ADDN ALTN TO CUPBOARD IN SGTS POOL SMQS BROOKSHABAD AF STN UNDER GE BRICHGUNJ SVP AND ADDN ALTN OF BLDG NO P 505 OFFICE AND REPAIR AREA AT 282 9I FD WKSP COY EME AT GE BRICHGUNJ MIL STN SRI VIJAYA PURAM

Amount

Dismantling boarding, of any description and thickness fixed in any position with nails complete all as specified and directed

Post ConstructionTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

S&F Butt hinges, medium weight coldrolled mild steel and fixed 75mm size complete all as specified and as directed.

Supply & Fixing mild steel 40mm dia Brass polished cupboard knobs fixed with nut, screw and washer off complete all as specified and as directed.

S & F 24 Inches Telescopic Drawer Channel Stainless Steel | Rust Free | 600mm Ball Bearing Soundless Office Table Drawer Slides Pack of 1 Set (2 pcs) complete all as specified and as directed. MAKE:- Godrej / Heittech / KAFF

S&F 75mm size hasp and staple, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed.

S&F 150mm long extruded aluminium alloy anodised handles fabricated type, anodised complete all as specified and as directed.

S&F 75mm long extruded aluminium alloy anodised handles fabricated type, anodised complete all as specified and as directed.

S&F 100 Butt hinges extruded aluminium alloy, anodised. With galvanished mild steel hinge pin , anodised and fixed type B-21 complete all as specified and as directed.

M&L for 16.75 mm thick HDHMR (High Density High Moisture Resistant) board of any Colour to fixed with screws to timber frame work or Fixed with aluminiun frame work to the fixing Clips complete all as specified and as directed

S&F aluminium composite panel sheet of 3mm to 4mm thick,with 0.5 mm thick aluminium cover sheet both side fixed on aluminium frame work with plastic strips (double sided sticker) of suitable size of varying thickness of 10mm to 30mm applying adhesive over aluminium sections for fixing composite panel and fixed with screws. The joints of panels shall be filled with weather proof sealant for required portion, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level).complete all as specified and as directed.

Excavation over areas n. exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Surface excavation n.exc. 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm etc complete all as specified and directed.

M&L for hardcore of broken or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base. complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.

M&L for PCC (1:2:4), Type B1, using 20 mm graded aggregates, 100 mm thick, incl all necessary forwork required and finishing the concrete surface even and smooth without using extra cement. complete all as specified and directed.

M&L 20 mm thick Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth. complete all as specified and directed.

Supply only Metallic floor hardener.complete all as specified and directed.

M&L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' complete all as specified and directed.

M&L for forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' etc complete all as specified and directed.

M&L for mild steel work tubular pipes as in posts/truss/purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 etc complete all as specified and directed.

S&F Mild Steel of gde Fe 410-W as in plain plates cut to required sizes including forming holes without any attachement etc complete all as specified and directed.

S&F 0.50 mm thick pre painted galvalume aluminium zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws complete all as specified and directed..

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed.

S&F 0.56mm Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) etc fixed with self tapping screws complete all as specified and as directed.

S&F MS works as in wind ties for roof incl securing bolts etc complete all as specified and as directed.

M&L preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthethic enamel paint over a coat of primer complete all as specified and directed.

All as per item No 32 above but n.exc 10cm width or girth

M&L for 60mm thick coloured machine pressed precast concrete interlocking paver block glossy finished any size and shape conforming to IS 15658-2006 , M-35Grade with grey cement and pigment over and including 25mm thick sand filling, spreading and leveling etc complete all as directed.

NAWAZ CONSTRUCTIONS (BID ID -3355190)

M/s Kamal Electrical (BID ID -3354263)

SK ENTERPRISES (BID ID -3354622)

B S Grewal (BID ID -3354605)

MAJUMDAR FURNITURE (BID ID -3354871)

M/s Saina Enterprises (BID ID -3355049)

Nirman Construction Company (BID ID -3354914)