ADDN/ALTN OF BLDG NO P-284 (MINI ARMOURY) AT SU AT AF STN BAMRAULI AND OTHER SANCTION WORKS UNDER GE (AF) BAMRAULI

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in leveling course to floor complete all as specified and directed.

M&L for Machine cut Kota stone 550X550 slab flooring 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, screed bed or bedding layer of mortar 20 mm thick for laying floor finished in CM 1:4.complete all as specified and directed.

M&L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick joint free (square/ rectagular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces of size 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortor (1:4) on vertical surface as in backing coat all as specified and directed.

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for Preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer including balance area complete removal.

M&L for Preparation of new plastered surface of ceiling and applying two coat of Oil bound distemper on ceiling over one coat of primer surface (using roller brushes) complete.complete all as specified.

M&L for Preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer birla white care Putty on wall obtain smooth finish etc including balance area complete removal.

M&L for complete removal of existing treatment on ceiling surface and applying two coat of oil bound distemper (using roller brushes) complete.complete all as specified and directed.

Excavation in post holes (or similar holes) each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around. In layers n. exc 25cm, for hard/ dense soil.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.

S&F steel work in tubular including special shaped washer etc. complete using ERW or induction butt welded yubes conforming to I.S 1161-1979 St grade St-240

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates all as specified and directed

S&F plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases splices angle brackets cleats and other connections

M&L for PCC 1:2:4 type B-2 (Using 40mm graded stone aggregate) as fdn filling and mass concrete for post holes.

M&L for two coats of synthetic enamelled paint over a coat of red oxide on steel surfaces over 10 cm width or girth over old steel surfaces etc, complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out all as sfd and directed.

M&L for PCC 1:4:8 type D2 graded stone aggregate cement concrete in foundations, filling and mass concrete all as sfd and directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as sfd and directed.

M&L for cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick , in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays all as specifed and directed.

S&F Chequered cement concrete coloured tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over including 1:6 CM 20mm thick sand cushioning including filling of joints with sand complete all as specified and directed.

Taking down chowkhat or frame with shutters (without taking of shutters from the frame) N. exe 1.5 sqm each any type of wooden /door (wooden , aluminium & Steel etc)

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as specified and directed

S&F Steel windows or ventilators, fixed type, with glazing bars all as specified and directed by engineer in charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.

S&F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane all as specified and directed

S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

M&L for Preparation of new surfaces of steel of any description over 10cm grith or width, not otherwise described with one coat of red oxide followed by two coats of synthetic enamel paint.

Taking down chowkhat or frame with shutters (with taking of shutters from the frame) exe 1.5 sqm each but n. exc 4 sqm each any type of door (wooden , aluminium & Steel etc)

M&L for Solid PVC Frame for door,kitchen cabinet,cupboard of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style)both side prelam pvc sheet of decortive choice consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed.

S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in bed plate for fixing holdfast etc all as specified and directed.

M&L for PCC 1:3:6 type C-0 using 12.5 mm granted stone aggregate as hold fast/filling in pressed steel frame

M&L for Flush shutters 30mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides

M&L for Preparing surfaces of any description not otherwise described over 10 cm width or girth of new or previously untreated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer

S&F Aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length

S&F 300mm Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed

S&F Aluminium handles, 150mm fabricated type anodised

S&F drapery rod 19 mm inner dia (wall thickness not les than 1.6mm) stainless steel fancy type bracket fixed with rawl plug or screw on walls/beam and shall be provided with fancy finial at ends complete of approved all as specified and directed. Note Bracket measured and paid seperately.

S&F curtain brackets mild steel with matching with the curtain rod complete all as specified and directed

Dismantling of brick tiles laid bedded and pointed in any morter or brick tiles on roof , floors, channels, kerbs, aprons etc,cement concrete of any description & in any position not otherwise specifically provided for.

M&L for PCC 1:2:4 type B-0(using 12.5mm graded stone aggregate) for providing cement concrete as levelling and roof kerbs or mud stops, including finishing the surface etc complete all as specified and directed.

M&L for rendering 10mm thick rendering in CM 1:4 over concrete surfaces of roof mixed 5% liquid water proofing compound by weight of cement or as per manufacturers instruction including surfaces finished even and fair without using extra cement complete all as spd and directed. note: Liquid water proofing compound paid seperately.

M&L for Liquid water proofing compound

M&L for Provision of Roof treatment consisting of the following items and operations :-(a) Cleaning the roof surface from dust / dirt and any other foreign materials and applying a coat of bituminious primer @ 0.30 liters per square meter uniformily after the surfaces fully dried complete all as specified and directed.(b) M&L for applying a coat of hot blown bitumen grade 85/25 conforming to IS 702 over primed surface of roof slab @ 1.20 Kg/Sqm complete all as specified and directed. (c) M&L for APP based polymeric water proofing membrane minimum weight 3 Kg / Sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/Sqm or as per IS), laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor including cutting & chasing 100mm x 75mm in the parapet to insert the APP membrane and sealed with and including PCC (1:2:4) type B-0 (Mixed with and including polymer based liquid water proofing additive @ 5% by weight of cement or as per manufacturer’s specification). Membrane shall be laid with 100mm side/end lap on prepared surfaces as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer.

M&L for preparation of new APP based polymeric water proofing membrane surface applying aluminium paint in two coat each coar @0.1 litre per Sqm complete all as specified and directed

S&F in repair CP vitreous china soap dish fancy type complete all as specifed and directed.

S&F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed.

S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including dual flush ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.

S&F in repair Vitreous China wash basin, flat back, size 450x300mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets.

S&F Waste fitting brass chromimum plated 32mm dia, for wash hand basins etc with long screw shanks & fly nuts, plain end, bedded in red lead cement and other end fixed all as specified and directed.

S&F Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F 32 mm dia PVC waste pipe 90 cm long fexible type for Wash basin/urinal all as specified and directed.

S&F PTMT grating doom 100mm dia including removing the old grating (minimum weight- 25 gms)

S&F angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. but fancy type, chromium plated with long shank and cup (concealed type)

S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.

Dismantling tanks water tank exc 250 but n exc 500 ltr.complete all as specified and directed.

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc. of 20 mm dia directed complete all as specified and as directed.

S&F 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed bothends for ironpipe or forunions and fixed

Taking up or down old steel tubing 15 mm dia complete all as specified and directed.

Refixing old 15 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

S&F 15 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors including taking up or down old steel tube complete all as specified and directed.

S&F 110 mm cast iron sanitary connection socket to fit wc out let complete all as specified and directed.

S&F 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F 75 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F PVC SWR (110) bends any radius comlete all as specified and directed.

S&F 75 mm PVC (SWR) junction single, (singl T) (equal or unequal), ordinary or inverted (spigot or socket type) or with paralle oval access doors branches .complete all as specified and directed.

S&F 110 mm PVC (SWR) vent cowl. Complete all as specified and directed.

M&L for 75mm PVC (SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for PVC(SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

Excavation in trenches for n.exc 1.50m wide not exceeding 10 Sqm on plan and n.exc 1.5m in depth in soft/ loose soil and getting out all as sfd and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchionsall as specified and directed.

M&L for M25 Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, all as specified and directed.

M&L for RCC M-25 type B1 (1:2:4) Columns, pillars, piers, posts and struts all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as sfd and directed.

Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as sfd and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m. all as specified and directed.

M&L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including Modular metal flush box minimum 1.6 mm thick, Modular white cover plate with frame, of required module at site, fixed with chromium plated screws and washers for switches and sockets, including 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduit and making good disturbed surfaces area by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and directed for the following:- Note: - Cutting chase to wall wherever required shall be included in the rate quoted for point wiring.

(a) One light, fan, bell point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge.

S&F Modular socket outlet 2 in 1, 5 pin, 6 Amps flush type white finish complete all as specified and as directed.

M&L for point wiring using approved colour coding as per IS, with Zero Halogen Flame retardant (HFFR), smoke free, non toxic, non corrosive installation cable with UNILAY construction copper conductor 1.5 Sq. mm (nominal area), single core, insulated and unsheathed stranded cable 1100 Volts grade ISI-694 marked in & including heavy duty, electric resistance welded(ERW) stove enameled surface mounted conduit, heavy duty ISI marked as per IS:9557 (Part I) 1980 for light points controlled by one Switch , including HFFR insulated unsheathed unitary construction copper conductor 1.5 Sq. mm nominal cross sectional area wire as earth continuity conductor up to common earth and connecting to earth dolly. Note:- Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

Supply flame proof rotary type with termination box in LM6, 16 Amp, single pole 250V.

S&F LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size

M&L for point wiring using approved colour coding as per IS, with Zero Halogen Flame retardant (HFFR), smoke free, non toxic, non corrosive installation cable with UNILAY construction copper conductor 4.0 Sq. mm (nominal area), single core, insulated and unsheathed stranded cable 1100 Volts grade ISI-694 marked in & including heavy duty, electric resistance welded(ERW) stove enameled surface mounted conduit, heavy duty ISI marked as per IS:9557 (Part I) 1980 for light points controlled by one Switch , including HFFR insulated unsheathed unitary construction copper conductor 4.0 Sq. mm nominal cross sectional area wire as earth continuity conductor up to common earth and connecting to earth dolly. Note:- Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth as specified

M&L for sub main wiring using approved colour coding as per IS, with Zero Halogen Flame retardant (HFFR), smoke free, non toxic, non corrosive installation cable with UNILAY construction copper conductor 4.00 Sq. mm (nominal area), single core, insulated and unsheathed stranded cable 1100 Volts grade ISI-694 marked & including heavy duty, electric resistance welded(ERW) stove enameled surface mounted conduit, heavy duty ISI marked as per IS:9557 (Part I) 1980h , including HFFR insulated unsheathed unitary construction copper conductor 4.00 Sq. mm nominal cross sectional area wire as earth continuity conductor up to common earth and connecting to earth dolly. Note:- (a) Two runs of 4.0 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

S&F 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, Complete with connection testing and commissioning.

S&F 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles & Neutral and current carrying capacity 40 to 63 AMP, Complete with connection testing and commissioning.

S&F MCB DB flame proof type 8 way ,220 V ,50 Hz, comprising 200 amps bus bar, neutral link, earth link

M&L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

S&F ceiling fan flameproof 1200 mm sweep, class of insulation : B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service Value ( CMM/W) minimum 6.00, Air delivery minimum 205 CMM 1500 RPM ,electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V , 50 Hz, single phase AC supply, earthing etc including necessary connection with flameproof conduit with 3 core 1.0 Sqmm flameproof wire and including writing MES No all as specified and as directed.

S&F wall mounted fan 450 mm sweep, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, speed 1500 RPM ,electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, suitable for 230 V , 50 Hz, single phase AC supply, earthing etc including necessary connection with flameproof conduit with 3 core 1.0 Sqmm flameproof wire and including writing MES No all as specified and as directed.

S&F aluminium strip 25mm x 3mm complete with saddlev and fixing screws for fitting the strip

S&F single pointed air termination aluminium rod 12mm dia,300mm dong

M&L for Test point terminal block made of gun metal or phosphorus broze size 75x75x25mm drilled and screwed including 3 nos ,8mm dia 25mm long hex head screw

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx 6.3mm thick buried direcly in ground vertically to a depth not less than 2.25 meters below normal ground lev el with the top edge of earth plate not less than 1.5 meters below ground level connected to galvanized iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No.5 of SSR part I and earth wire protected by galvanized pipe light grade 40mm bore and thorugh test point including necessary earth work and excavation in any type of strata, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chember with 40mm thick RCC 1:2:4 type B1 design mix cover slab with 6mm kdia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc complete all as specified and directed and testing on completion.

Supply and laying pipe galvanized'Medium grade'including fitting 40mm dia

M&L for PCC 1:2:4 type B-1 using 20mm graded broken stone aggregate as in mass concrete in coping, foundation etc

S&F in repair 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as spesified and directed .

S&F 200 mm long Aluminium anodised barrel tower bolts of extruded section.complete all as spesified and directed .

M&L for power coated anodised aluminium doors (sliding/ hanging type) with frame size 101.60 x 44.45 x 2.00 mm thick and shutter aluminium anodised and top rail 47.62 x 44.45 x 1.50 mm style 47.5 x 44.5x1.5mm, lock rail 83.50 x 44.45 x 1.50 mm and bottom rail 150.00 x 44.50 x 2.50 mm including necessary aluminium fittings like aluminium butt hinges 04 Nos, aluminium handle 150mm 02 Nos, aluminium tower bolts 200 mm 01 No, aluminium door stopper 01 Nos, jointing cleats glazing cleats, rubber packing, anodised aluminium shape beading screws etc with panelling in two parts with 12mm thick prelaminted particle board in lower panel and 5mm thick tinted glass in upper panels including all fittings & fixture complete all as specified and directed.

S&F in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications. Note : Vitreous china wash down water closet (Pedestal Pattern) cat Part No. CURATOR S1013132 S trap 250mm of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) and including fixing of the following components viz. pedestal pan with "P" or "S" trap, seat and cover for pedestal pan, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper fixed as in repairs complete all as specified and as directed. Note:- Flushing cistern and flush pipe as required shall be measured and paid for under supply only separately.

S&F in repair Vitreous China Urinal, full stall type, white (including flushing cistern, flush pipe and waste pipe complete all as specified in particular specifications.

S&F in reapir HEALTH FAUCET (ABS body) mild steel chrominium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making fixed in position complete all as specified and directed. as in repairs complete all as specified and as directed.

S&F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 2mm45gms/40mm 60 gms waste pipe of 40mm dia suitable for WHB, kitchen sink complete all as specifed and directed

S& F Stop valves/Gate valves 25 mm dia cast copper alloy,screwed down, high pressure with crutch or butterfly handel, screwed both ends for iron pipe or for unions and fixed.complete all as specified and directed.

Taking up or down old steel tubing 20 mm dia complete all as specified and directed.

S&F 20 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors including taking up or down old steel tube complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).

Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.

S&F in repairs 600mm long between flanges brass chromium plated towel rack with brackets fixed to wall with chromium plated brass screws complete all as specified in particular specifications. Note :- (i) Towel rack cat part No F5002101 of Cera or equivalent from make as specified in Appendix 'B' to Particular specifications complete all as specified and as directed.

S&F in repair grating doom 100mm dia of CP (Minimum weight 60 Gms) complete all as specified and directed

S&F in repair CP fancy type towel ring complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm (minimum) wide with chromium plated brass bracket guard and railing 600mm long complete.

Dismantling of cast iron or renforced drain pipe 100mm/75mm dia of any description complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe100 mm dia in any length with or without ear, with cement joint, laid in trenches or in wall complete all as specified.

S&F 100 mm cast iron sanitary connection S branch with branch 370 to 450 mm long excluding joint complete all as specified and directed.

M&L for complete removing existing treatment on wall surface and applying two coats of oil bound distemper overover one coat of 1.5 mm wall care putty complete all as specified and directed by Engg-in-Charge.

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new plaster surfaces of walls complete all as specified and directed.

M&L for 75 mm thick type D-1, 1:4:8 (using 20mm graded stone agg) as in sub base. complete all as specified and directed.

M&L for non-skid Heavy duty endura tile 300x300x10-12mm thick coloured joint free in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 18-20mm thick granite work table rubbed and polished incuding moulding for wall lining /kitchen platform over 12mm thick cement mortar 1:3 thick and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated , etc) sheet in roof covering complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/ slabs/blankets, any thickness, includinguding cover fillets all as specified and directed.

M&L for 6 mm thick plywood, grade BWR, type BB, fixed with nails,screws complete all as specified and directed.

S&F POP false ceiling over GI snap grid permiter wall channel 25x25mm fixed on wall all round, Gl main ceiling channel with flange 50x25mm @ 250mm C/C, cross GI channel section 25x12 mm @ 750 C/C alongwith the suspenders of GI angle 25x25 mm @ 1200 mm C/C. The 20 to 25 mm thick POP lath pastering over n. less than 0.56 mm thick wire gauge in complete ceiling incl form work. Ration of POP and wall putty (1:10) and applying two coats of oil bound distemper incl chalk whitening and priming in alkali restant incl preparing the surface complete all as directed.

S&F POP false cornices matching with existing POP false ceiling and wall putty (1:10) and applying two coats of oil bound distemper incl chalk whitening and priming in alkali restant incl preparing the surface complete all as specified and as directed by Engineer-in-Charge.

Surface dressing n exc15 cm deep and getting out in loose/soft soil complete all as specified.

M&L for 40mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring in size of panel 1.20x 1.20 mtr with Aluminium dividing strips, 1.5mm thick and 38mm wide complete all as directed. Note: Aluminium dividing strips, paid seperately.

M&L for Aluminium dividing strips, 1.5mm thick and 38mm wide complete all as directed.

M&L for PCC 75mm thick type C-1 ,1:3:6 using 20mm graded stone aggregate as in plinth protection complete all specified as directed.

M&L for Preparation of old decorated plastered or unplastered wall surfaces and applying one coat of cement base paint on wall surfaces

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

Demolition of cement concrete tile of any description and in any position not other wise specifically provided for complete all as specified and directed.

S&F in repair Bib taps short body fancy type with foam flow areator ( flow rate 3 to 6 LPM) ( multi hole nozzele) cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed Make CERA CAT PART NO F2014151, Hindware Cat Part No.F690004CP or similar from make list as approved by GE.

S&F in repair HEALTH FAUCET (ABS body) mild steel chrominium plated suitable for 15mm dia pipe with 1. mtr long flexible tube and ABS wall hook including making fixed in position complete all as specified and directed. as in repairs complete all as specified and as directed.Make : CERA CAT PART NO F8030105AB or: Jaquar CAT Part No.ALD-CHR-573 Hindware Cat Part No.F160110CP or similar from make list as approved by GE.

S&F in repair Bib taps long body fancy type with foam flow areator ( flow rate 3 to 6 LPM) ( multi hole nozzele) cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed Make: CERA CAT PART NO F2014152, Hindware Cat Part No.F690006CP or similar from make list as approved by GE.

S&F in repair Pillar taps, fancy type with foam flow areator ( flow rate 3 to 6 LPM) ( multi hole nozzele) cast copper alloy, with capstan heads, chromium plated, swan neck type screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed. Make : CERA CAT PART NO F2014103, Hindware Cat Part No.F690001CP or similar from make list as approved by GE.

S&F in repair ,Chromium plated 125 mm shower roses with CP Shower arm 15 mm size, 195mm long with bend of 45 degree with flange foam flow areator ( flow rate 3 to 6 LPM) ( multi hole nozzele) complete all as specified and directed. MAKE: CERA CAT PART NO F7020111AB, Hindware Cat Part No.F160142P or similar from make list as approved by GE.

S&F in repair, PVC valveless, syphonic action type, 10 Ltr capacity Twin flushing cistern, low level, white, with inlet, including brackets complete all as specified and directed.Make: CERA CAT PART NOB1020106, Hindware Cat Part No.C-1010 or similar from make list as approved by GE.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

M.R. ENTERPRISES (BID ID -3078971)

HIMANSHU TRADERS (BID ID -3065983)

M/S R S Traders (BID ID -3066871)

Bharat Trading Company (BID ID -3067057)

R K CONSTRUCTION COMPANY (BID ID -3066817)

M/S SURISONS (BID ID -3065871)

M/S VIJAY SINGH (BID ID -3067809)