RENOVATION OF HOUSE NO. 3511 JUDGE HOUSE SECTOR 24 CHANDIGARH.

Providing and fixing 2'-0” deep cupboard /cabinet consisting of 19mm thick commercial board and 6mm thick ply on back side, 4mm thick teak ply pasted on the exposed surface and making shelves in cabinet 0.8mm mica inside canbinet . The rate further includes the cost of lipping, piano hinges, cupboard lock, screws, nails, 2 nos. fancy s.s. handles, 2 nos. magnetic catchers, fevicol and painting two coats over one priming coat and preparation of surface on board and ply surface and spirit polishing on teak ply complete in position as per entire satisfaction of Engineer-in-charge.

Providing and laying Antiskid vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade. The tile are to be fixed with 3mm thick spacer. The tile are to be fixed with 3mm thick spacer. The grooves are to filled with cemenitious grout mixed with proporation of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material complete in all respect and to entire staifaction of Engineer in Charge. Size of Tile 600x1200 mm

Dismantling of ceramic tiles or vitrified and plaster to making the surface clean for refixing the glazed tiles including removing of malba complete in all respect and to the entire satisfaction of the Engineer in charge.

Providing, manufacturing and installation of modular kitchen cabinets in the existing kitchen space. The kitchen cabinets are to be manufactured at factory by agency who have prior facility for manufacturing modular kitchen. The kitchen cabinets are to be made from 18mm thick HDHMR board to be provided with 1.00mm thick superior qualit high gloss laminate. The edges are to be provided with high quality PVC edge bending. The hardware and accessories for the cabinets are to be provided on make Hafele / Olive or equivalent. The cabinets shall have lighting provisions as per the approved pattern. The work also includes making holes for chimney and gas pipes. The work is to be undetaken as per the approval of the Hon'ble Judges of Punjab and Haryana High Court, for which the agency would be required to submit design details and any changes asked by the authorities shall have to be incorporated in the execution. All the work have to be executed as per the requirement and approval of the Hon'ble Judges of Punjab and Haryana High Court, complete in all respects and to the entire satisfaction of the Engineer in charge.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coats

Providing plaster of paris (minimum 8mm thick) punning over walls with after scraping old white wash / distemper from the existing surface including chipping of surface and cost of scaffolding etc. to prepare smooth and even surface complete in all respect and to the entire satisfaction of the Engineer in charge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @0.90 Itr/10 sqm).

French spirit polishing : One or more coats on old work

Providing and fixing book rack made out of with side, top and bottom frame 1'-0" deep and inner shelve 9" deep made out with 19mm thick commercial board, 6mm thick ply on the back side, teak ply on the exposed board surface including front side of 6mm ply, teak wood lipping on board edges, french polish on the teal ply and lipping and synthetic enamel paint on the back side of 6mm ply complete in position as per entire satisfaction of Engineer-in-charge.

Providing and fixing bright finished Godrej 100 mm mortice latch and lock, ISI marked with six levers and a pair of anosided (anodic coating not less than grade AC 10 as per IS : 1868) brass lever handles of approved quality with necessary screws etc. complete in all respects to the entire satisfaction of Engineer-in-Charge.

Providing and fixing stainless steel finish handles of size 125mm with necessary s.s. screws etc. complete in all respect and to the entire satisfaction of the Engineer in charge

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Please Enable Macros to View BoQ information