FULL DEPOSITE AND CHANGE XLPE CABLE UNDER EDD2 MEERUT

Amount

A) 11KV XLPE Cable 3x185 sqmm. At Churr.

Cartage of XLPE 3x185 sq.mm 11KV cable from center store to JE Store including loading & unloading at both ends maximum distance up to 40 km :–

Cartage of XLPE 3x185 sq.mm 11KV cable from JE Store to site of work including loading & unloading at both ends maximum distance up to 20 km :–

Digging of cable trench of size 0.50 in to 0.750 mtr. Depth width digging the earth for loop at both ends.

Laying of 11KV XLPE Cable 3X185 sq mm. Cable in Trench.

Felling the Trench width executed earth width proper dressing.

Fixing the Jointing kit (Straight threw) of 3x185 sq mm.

GIVEN NEW 40 H.P CONNECTION OF ADISHASHI ADHIKARI NAGAR PANCHAYAT HARRA. Cartage of following material from store center Meerut to JE Store including loading & unloading at both ends maximum distance up to 40 Km. :– A) PCC Pole 8.5 mrt long/ST pole 11 mtr long.

B) 11 KV XLPE 3x70 sqmm. Cable

C) 63 KVA Transformer

Cartage of line material from store centre to dump site & then dump site to site of work on day to day basis, including loading & unloading at both ends maximum distance up to 20 Km.

Cartage of following material from JE Store to site of work including loading & unloading at both ends maximum distance up to 20 Km. :– A) PCC Pole 8.5 mrt long/ST pole 11 mtr long.

B) 11 KV XLPE 3x70 sqmm. Cable

C) 63 KVA Transformer

Erection of PCC pole 8.5 mtr long/STP Pole 11 mrt long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of Soil including back filling of the pole with proper ramming after completion of work.

Fabrication and fixing of all 11 KV H.T/L.T. line accessories.

Erection of Double pole on PCC pole 8.5 mtr after digging of pit of required size including fabrication and fixing of Top channel, droper channel & base channel alongwith, fixing all 11 KV accessories TPMO, Fuse set 11 KV pin insulators and making connection properly.

Fabrication and fixing of Top Channel,Dropper channel Transformer base angle -Fuse set, TPMO Etc.

Earting of each 11 KV line pople & T/F properly after drive of electrodes if size 20mmx250mm and connection the earthing point with GL wire.

Mounting of 63 KVA with proper jumping of HT side and fixing of cable on LT. side of T/F making connection properly.

Making a section pole to exist pole after fabrication & fixing of T channel fixing of all 11 KV accessories.

Erection of stay rod complete after digging a pit of size 1.20 x 0.60 x 1.6 mtr and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming.

Laying of overhead cable on PCC pole 11KV XLPE cable 3x70 sqmm

Felling the jointing kit 11KV XLPE cable 3x70 sqmm

Grouting of PCC/ST poles with Dust, Cement & Stone blast concreting.

Providing and fixing stay clamps .

Providing and fixing Holding clamps .

Providing and fixing LT clamps .

Providing and fixing Bolt and Nuts .

M/S ABID CONTRACTOR