Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
2 May 2022, 3:00 pmClosed
BLOCK DEVELOPMENT OFFICER (BP)SEDAPATTI
PANCHAYAT UNION OFFICE SEDAPATTI
Madurai District _Sedapatti Block_ Construction of New Community Hall at Anaikaraipatti Village in Vandari Panchayat under NNT 2021-22
2022_RDTN_230732_1
Sedapatti/NNT/p01
Open Tender
Civil Works
Item Rate
120 days
sedapatti
Refer Tender document
3 documents required · 3 mandatory
₹0
₹50,000
4 May 2022
29 Apr 2022
2 May 2022
29 Apr 2022
2 May 2022
30 Apr 2022
Amount
Earth work excavating and depositing on bank with initial lead of 10m and initial lift of 2m in hard stiff clay,stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulder SS 20 A HGS for foundation.
Supply and filling good river sand complying with standard specification for filling in basement.
Basment Supplying and filling of conveyed earth with a lead of 5Km for basement filling
Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed
Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.(MS
Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.
Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs as dir
Plastering the exposed surface of RCC item of work such as slabs, beams, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with CM 1:3, 10mm thick. including raking the surface etc
Plastering 12mm thick with CM 1:5 mix including all cost and conveyance of all material to siteand labour charges etc. complete.
Supplying and fabricating and placing in position MS or RTS reinforcement works
Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required density.
Finishing the top of roof with one course of machine pressed tiles of size 20 x 20 x 2cm of approved quality laid in CM 1:3, 12mm thick. With water proofing compound confirming to IS by 2% by weight of cement used & the joint pointed neatly to full depth
Paving the floor with Stain free nano polish vitrified tiles of approved quality and colour of size 600 mm x 600 mm x 8 mm of approved make, quality and colour in all floors over a base layer of CM 1:3, 20mm Tk and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per the colour & quality of tiles should be got approved.
Exterior Emulsion ( Plastic Emulsion ) two coats over a coat of primer including preparation of surface by removing loose particles and other materials including cost and conveyance of all material and labour charges etc. complete.
Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).
Painting with ready mixed synthatic enamel paint two coats including prepration of surfaces by removing loose particles and other materials and applying steel lip wherever required to make the surface level and smooth including cost and conveyance of all
Supply of steel door of size 2.40x2.10m including cost and conveyance of all materials to site of work and all labour charges etc complete.
Supply of steel door of size 2.40x2.10m including cost and conveyance of all materials to site of work and all labour charges etc complete.
Supply steel window of size1.20x1.30m including cost and conveyance of all materials to site of work and all labour charges etc complete.
Wiring with light point SD No. 20
Supply & Fixing of Tube Light Fitting
Wiring with Plug point SD No. 36
Wiring with Fan point SD No.22
Supplying and Fixing of Fan SD No.107
Supply & Fixing of Main with Board SD No 125
Supply & Fixing of Meter board with fuse carrier SD No 128
Supply & run of Service wire SD No. 64
Provision for Name Board charges
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
V SUBRAMANI
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .