PROVN OF MD ACCN (PH-I OF TWO PHASES) AT SUKNA MILITARY STATION UNDER GE (P) SILIGURI

Amount

BUILDINGS & STRUCTURE (Sch 'A' PART-I)

Lump sum price worked out by the Contractor for “BUILDINGS & STRUCTURE” as listed in Schedule ‘A’ Part-I. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 19,23,00,000.00 inserted by the MES in Schedule ‘A’ Part-I.

EARTHWORK, SITE CLEARANCE AND SITE DEVELOPMENT (Sch 'A' PART-II)

Lump sum price worked out by the Contractor for “EARTHWORK, SITE CLEARANCE AND SITE DEVELOPMENT” as listed in Schedule ‘A’ Part-II. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 35,27,236.23 inserted by the MES in Schedule ‘A’ Part-II.

INTERNAL WATER SUPPLY (Sch 'A' PART-III)

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part-III. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 16,60,588.67 inserted by the MES in Schedule ‘A’ Part-III.

INTERNAL ELECTRIFICATION (Sch 'A' PART-IV)

Lump sum price worked out by the Contractor for “(INTERNAL ELECTRIFICATION)” as listed in Schedule ‘A’ Part-IV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 60,34,899.94 inserted by the MES in Schedule ‘A’ Part-IV.

ROAD, PATH, CULVERT & HARDSTANDING (Sch 'A' PART-V)

Lump sum price worked out by the Contractor for “(ROAD, PATH, CULVERT & HARDSTANDING)” as listed in Schedule ‘A’ Part-V. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 82,43,291.68 inserted by the MES in Schedule ‘A’ Part-V.

SEWAGE DISPOSAL (Sch 'A' PART-VI)

Lump sum price worked out by the Contractor for “(SEWAGE DISPOSAL)” as listed in Schedule ‘A’ Part-VI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 2,64,180.46 inserted by the MES in Schedule ‘A’ Part-VI.

AREA DRAINAGE (Sch 'A' Part-VII)

Lump sum price worked out by the Contractor for “(AREA DRAINAGE)” as listed in Schedule ‘A’ Part-VII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 61,29,756.86 inserted by the MES in Schedule ‘A’ Part-VII.

COMPOUND WALL / FENCING / GATE (Sch 'A' PART-VIII)

Lump sum price worked out by the Contractor for “(COMPOUND WALL / FENCING / GATE)” as listed in Schedule ‘A’ Part-VIII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 81,83,347.37 inserted by the MES in Schedule ‘A’ Part-VIII.

EXTERNAL WATER SUPPLY (Sch 'A' Part-IX)

Lump sum price worked out by the Contractor for “(EXTERNAL WATER SUPPLY)” as listed in Schedule ‘A’ Part-IX. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 3,21,649.80 inserted by the MES in Schedule ‘A’ Part-IX.

EXTERNAL ELECTRIFICATION (Sch 'A' PART-X)

Lump sum price worked out by the Contractor for “(EXTERNAL ELECTRIFICATION)” as listed in Schedule ‘A’ Part-X. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 29,82,154.70 inserted by the MES in Schedule ‘A’ Part-X.

FIRE FIGHTING (Sch 'A' Part-XI)

Lump sum price worked out by the Contractor for “(FIRE FIGHTING)” as listed in Schedule ‘A’ Part-XI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 7,07,885.40 inserted by the MES in Schedule ‘A’ Part-XI.

SOLAR WATER HEATER (Sch 'A' Part-XII)

Lump sum price worked out by the Contractor for “(SOLAR WATER HEATER)” as listed in Schedule ‘A’ Part-XII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 13,97,344.08 inserted by the MES in Schedule ‘A’ Part-XII.

LIGHTNING PROTECTION AND DG SET (Sch 'A' Part-XIII)

Lump sum price worked out by the Contractor for “(LIGHTNING PROTECTION AND DG SET) ” as listed in Schedule ‘A’ Part-XIII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 2,45,756.26 inserted by the MES in Schedule ‘A’ Part-XIII.

LIFT (Sch 'A' Part-XIV)

Lump sum price worked out by the Contractor for “(LIFT)” as listed in Schedule ‘A’ Part-XIV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 68,58,654.80 inserted by the MES in Schedule ‘A’ Part-XV.

STP (Sch 'A' Part-XV)

Lump sum price worked out by the Contractor for “(STP)” as listed in Schedule ‘A’ Part-XV.. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 2,18,655.12 inserted by the MES in Schedule ‘A’ Part-XVI.

MISCELLANEOUS ITEMS REQUIRED FOR B/R & E/M SERVICES (Sch 'A' Part-XVI)

EARTHWORK, SITE CLEARANCE AND SITE DEVELOPMENT M & L for supply of Earth from the out side MoD land complete for all as specified and directed.

ROAD, PATH & CULVERT M&L reflective thermoplast white/yellow road marking paint laid down through road marking machine in layers of 3.00mm thick crystlese and use of 5kg per sqm by incorporating the white glass beads @ 300gms per sqm for reflecting including cleaning of surfaces complete all as specified and directed.

Supply and installation of Raised Pavement Marker (RPM) with polycarbonate lens electronically welded with the RPM body. The marker shall be scratch proof and abrasion resistant microprismatic polycarbonate lens with polycarbonate reflective panels with dual prismatic cubescapable providing total internal reflection. Dimension: The dimension of the marker is height 15.88mm, width 101.6mm, length 89.2mm. The marker conforms to ASTM D4280 and is in accordance with MOSRTH circular reference No. RW/NH 33023/10/97-DO III dated 11 June 1997. Marker shall be fixed with adhesive and no nails shall be used to affix the marker and shall be marked with manufacturer name complete all as specified and directed.

INTERNAL WATER SUPPLY S & F two way bib cock, chromium plated, with wall flange quarter turn (Low-flow) 16 mm bore complete all as specified and directed.

S & F 16 mm bore chromium plated mixer (wall / table mounted) complete all as specified and directed.

S & F bib cock, chromium plated, with wall flange quarter turn (Low-flow) 16 mm bore complete all as specified and directed.

S & F Hand shower (health faucet) with 1 meter long easy flex tube in chrome finish and walll hook with NRV (Back flow preventer) complete all as specified and directed.

S & F Angular Stop cock 15mm bore of pipe (16 mm outer dia) with wall flange chromium plated stop valves complete all as specified and directed.

S & F overhead shower 140mm round shape single flow with air effect (ABS & face plate chrome plated) with rubit cleaning system 16mm dia, with shower Arm Casted 120mm long heavy body round shape for wall mounted showers with wall flange complete all as specified and directed.

S & F wall mixer with provision for overhead shower, chromium plated, with 115mm long bend pipe on upper side, connecting legs & wall flanges complete all as specified and directed.

INTERNAL ELECTRIFICATION S&F Modular type TV Co-axial socket outlet-1 Module in the modular MS / GI sheet box and cover plate including connections etc complete all as specified and as directed

S&F Modular type RJ-11 telephone socket outlet in the modular MS/GI sheet box and cover plate including connections etc Double RJ-11 in one Module complete all as specified and as directed

S&F LED lights fitting 1x 12W, 220V, AC surface mounted down light round shaped with driver, holder including LED light connecting up complete all as specified and directed.

Fabrication supply & fixing of GI pipe bracket up to 32 mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt suitable for 1x32W LED security light fitting complete all as specified and directed.

S&F AC three phases, four wire, tamper proof, static watt-hour meter of accuracy class 1.0, 240 V per phase, 50 Hz, current 10A - 100A conforming to relevant Indian Standard or relevant IEC standards with dual mode (Credit / Prepaid) support, with polycarbonate enclosure, Advanced Revenue Protection Features, in-build billing date calculation, Microprocessor and LED based circuitry complete all as specified and directed. NOTE : Data management of the meter will be superimposed as and when centrally server and Tarrif Management Software will be installed in Sukna Mil Stn.

SEWAGE DISPOSAL Supply and laying DWCPE (SN8) 180 (OD)/163(ID) mm diameter pipes line including necessary joining and laid in trenches as per drawing in any length to make sewer line functional and testing complete all as specified and directed.

EXTERNAL WATER SUPPLY S & F ductile iron fitting/flange/SS/bend/reducer 80 to 200 mm dia of different size as required at site and directed.

Supply & Laying duclite iron (DI) pipe flanged ends, centrifugally cast, class K-9 in length laid in ducts under floor / walls / columns etc. of bore size 100 mm, complete all as specified and directed.

Construction of brick masonry valves pits of internal dimension complete 900mm x 900mm x 900mm with 3.15 mm thick MS sheet cover angle iron frame duly painted with locking arrangement including all necessary excavation and earth work PCC work complete all as specified and directed.

Construction of brick masonry valves pits of internal dimension complete 600mm x 600mm x 600mm with 3.15 mm thick MS sheet cover angle iron frame duly painted with locking arrangement including all necessary excavation and earth work PCC work complete all as specified and directed.

Supply and fix foot valve confirming to IS 4038 of dia 80 mm complete all as specified and directed.

EXTERNAL ELECTRIFICATION Supply, install pre fabricated outdoor compact sub station, (CSS) with power transformer, high voltage switch gear, low voltage switch gear/control gear and corresponding interconnections (Cable flexible, bus bar) connection between RMU & transformer shall be using 3 Nos 1Cx 95 sq mm aluminium unarmoured (E) XLPE cable and connection from transformer to LT panel shall be by CU busbar and auxiliary equipments in enclosed common encloser assembly of enclosure made out from sheet steel tropicalized to local weather conditions raised platform (1.2M height) incl foundation all as specified or directed shall be consisting of the following (a) HT switch gear ( manufactured as per reference standard (IEC 62271-(1,100,102,105,200) IEC-1, IEC 60529) 11 KV 630 Amps 21 KA for 3 sec. SF6 insulated Non-extensible compact switch gear consisting of one numbers motorized load break switch & one no motorized vacuum circuit breaker in SF6 insulated stainless steel enclosure with self -powered series trip micro prosper base numerical over current short circuit & earth fault relay (IDMTL+Inst) for protection in VCB and fault passage indicator in LBS. CSS shall be supplied from OEM only and make of RMU, VI & CSS shall be same. (b) RMU panel-(1 load break switch (LBS) 1 Vacuum circuit breaker (VCB) + CU busbar) BIL 28/75 kV, LBS function type:- 3 position disconnector and earthing switch equipped with separate drive unit. 1. Operation of LBS- Motorised 2. Cable switch rating-12 KV, 630A,21 KA/3 sec. 3. cable busing rating-630A 4. Cable cover : as per slandered 5.Fixed type capacitive voltage indication-provided Item Contined as Ser No.16.24 to 16.26

6. ON/OFF/Earth switch via MIMIC-provided 7. Bottom cable termination- suitable up to 1 No. x3Cx150 sq mm 8. LBS should have fault oassage indicator 9. compatible for SCADA based remote monitoring and operation facility. (c)VCB FUNCTION Type:- 3 position disconnector and earthing switch equipped with separate drive unit. VCB equipped with O/C, S/C, E/F time release for transformer protection. 1.Vacuum circuit breaker 12 kV, 630 A, 21 KA/3 Sec 2. Operation of breaker- motorised 3. Self powered electronic numerical protection relay providing over-current, short circuit & earth fault protection with ring core protection current transformers. 4. Capacitive voltage indication fixed type. 5.ON,OFF, EARTH indication on the front mimic of the panel. 6.Cable box for termination of cable up to 3 nos. x1Cx 95 sqmm/120 sq mm. 7. cable cover slandered 8. Emergency trip push button. 9. Shunt trip coil-230 V AC 10. Multifunction meter with RS485 port and associated metering CTs (3/4 line display with import/ Export Energy measures.) 11. Compatible for SCADA based remote monitoring and operation facility. 12. The cable compartment of ring main unit shall be internal arc tested for 21 kA for 1 Sec. (d)RMU accessories:

1. Manual operating handle 2.Manometer with remote contacts for SF6 gas pressure indication. (e) Transformer ( Manufactured as per reference slandered IS 11171, IS 2026-Part I to V, IEC 60076-11& IEC 60076-12) Type: Cast Resin dry type AN cooling Transformer 1. Ratio-11kV/0.415 kV, 2. Capacity: 500 KVA 3. No of phase: 3 & frequency: 50 Hz. 4.Vector group: dyn 11. ( 11 KV side delta, 0.415 KV side star.) 5. Off load tap Changer links. 6. Class of insulation: F 7. 50 % load losses : 1430 W ( Sub to IS tol.) 100 % load losses : 4100 W ( Sub to IS Tol.) 8. Percentage Imp: 4.5% 9. Winding material: Copper (f) Transformer Accessories 1. Winding temperature indicator 2. Make of Transformer: power star/United insulation/ABB/Schneider/ Kotson etc. g) LT panel ( Incomer) 1. 800 A, ACB, 4 Poles, draw out type motorised, 50 KA, microprocessor based release for O/L, S/C & E/F protection. 2.ON,OFF,TRIP lamps 3. R/Y/B indicating lamps

Boring hole under the existing road or PCC hard standingvwithout damaging the surface of the road to drawn through up to 100 mm bore pipe complete all s specifed and directed.

Supply and fix junction box made out of polycarbonate with IP 55/IP 65 protection of suitable size including - 04 Nos cable terminal, 02 Nos polycarbonate cable gland , 01 Nos DIN rail and 01 No. MCB SP, 10 KA 6 Amps complete all as specifed and directed.

Supply and fix LED garden light ( landscap light) BAMBOO- IP65 new generation, energy saving, environment friendly, long life aesthetically desingned aluminium landscap luminaire for diffused lighting with high power LED as light source of 8 watt , length 1 mtr complete all as specifed and directed.

Supply and fixing medium intensity aviation light complete all as pecified and directed.

FIRE FIGHTING Supply, install, testing and commissioning of " indoor cubical type" LT Distribution Board of suitable size factory fabricated CPRI typed tested with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-43and general construction , front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming MCCB rating. The panel board shall be fabricated out of 2.00 mm thick CRCA sheet duly pre-treated & powder coated, supporting frame angle iron suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring incl cable glands of suitable sizes incl PCC platform/plinth of suitable size complete all as specified & as directed with & incl the following accessories : (Fire Panel ) BUSBAR AND INTERNAL CONNECTION : The busbar shall be made up of 04 Nos Aluminium busbar 100A rated duly insulated with 1100 V grade standard colour coated PVC sleeves and rigidly mounted on suitable sized 'F' class insulators of non hygroscopic, all internal connections from main busbar to switch gear etc. PROVISION FOR CABLE ENTRY The provision for cable entry/exit shall be provide in the bottom for both incoming and outgoing cables Item Contined as Ser No.16.35

DG SET Supply, install, test and commission diesel engine driven generating set capable of generating 100 KVA at 415 V, 3 phase, 50 cycles 4 wire AC supply at 0.8 power factor. Engine coupled to alternator through a flexible coupling mounted on a common steel base frame complete with standard fitting/accessories as per IS-10002 and IS-13364 Part-II and including acoustic enclosur sound proof canopy as per CPCB norms , battery, PCC foundation and anti vibration mounting complete with AMF panel all as specified and directed.

STP Package Sewage treatment Plant- 75 KLD including Design (all civil structures, Contour leveling at 0.5 mtr intervals, process flow calculations as per CPEEHO Manuel), supply, freight, transportation, Packing & forwarding, Installation & commissioning as per following specification: Parameter Inlet Parameter Outlet Parameter Ph 6 – 9 6 – 9 BOD ≤ 300 mg/l ≤ 10 mg/l COD ≤ 600 mg/l ≤ 50 mg/l TSS ≤ 200 mg/l ≤ 10 mg/l O&G ≤ 40 mg/l ≤ 5 mg/l Total Nitrogen ≤ 10 mg/l Phosphorous ≤ 2 mg/l Coliform Nil Colour Colour Less TDS ≤ 2100 mg/l Turbidity ≤ 2 NTU Residual Chlorine ≤ 1 mg/l Odour Odourless Total Kjeldahl Nitrogen ≤ 10 mg/l Helminth Egg ≤ 1 Egg/l Acidity As arising Detergent ≤ 0.5 mg/l Phenolic Compound ≤ 0.001 mg/l 75 KLD Sewage Treatment plant consist below material & specifications:- Item Contined as Ser No.16.38 to 16.39

(i) 02 Nos Raw Sewage Pumps (ii) 01 No Fine Bar Screen (iii) 01 Lot of Air grid for equalization tank (iv) 02 Nos Air blower ( 1 working + 1 Standby) (v) 02 Nos MBBR media , SS Air grid & riser pipes (vi) 01 Lot of Tube settler internals (vii) 01 Set of Hypo solution dosing system with 02 Nos dosing pumps (viii) 02 Nos Sludge feed pumps (ix) 01 No Energy efficient drum thickener belt type filter press/Centrifuge complete with cleaning water pump & compressor - 01 No (x) 01 Set of DWPE dosing system with dozing pump & mixer (xi) 01 Set of Air grid for sludge sump (xii) 02 Nos Filter feed pumps (xiii) 01 No Dual Media filter with media (xiv)01 No Activated carbon filter with media (xv) 01 No Electrical control panel for STP operation (xvi) 01 Set of necessary Piping & valves (xvii) 01 Set of instrumentation comprising of pressure gauge ( 1 for each pump & blower ) , Level Control switch ( 3 Nos ) , Air rotameter ( 3 Nos) & Autodesluge valve ( 1 No ) (xviii) 01 Set of cabling to interconnect STP panel with various drives (ixx) 01 No Bar screen chamber in RCC construction (xx) 01 No. Equalization tank in RCC construction (xxi) 02 Nos MBBR reactor tank in series in RCC construction (xxii) 01 No Tube settler tank in RCC construction

(xxiii) 01 No Chlorine contact cum filter feed tank RCC construction (xxiv) 01 No Sludge sump in RCC construction (xxv) 01 No Treated water tank in RCC construction 30 KL capacity (xxvi) Necessary foundations for electro mechanical equipments (xxvii) 01 No Stilling chamber in RCC construction (xxviii) 01 No Oil & grease chamber in RCC construction (xxix) 01 No platform to dry PH sterile sludge with arrangement to applying hot air by trip such controlled moving arm method. NOTE : All the detailed design shall be submitted by contractor for approval of Accepting Officer.

Supply and install submersible water pumping sets,electric driven complete 2 HP inclusive of PCC foundation complete including DOL starter and MCCB with enclosure all as specified and directed.

Supply and install Pumping sets, centrifugal, electric driven complete 5 HP 210 LPM, 37 mtr Head, electric driven 415 volts,50 Hz inclusive of PCC foundationcomplete all as specified and as directed. (1W+1 S)(Treated water pump)

Construction of brick masonry valves pits, of the following internal dimension complete 600mmx600mmx600mm with 3.15 mm thick MS sheet cover angle iron frame duly painted with locking arrangement including all necessary excavation and earth work PCC work complete all as specified and directed.

M.P. SITANI AND SONS

MAA BHAGWATI ASSOCIATES

HTE INFRA LLP

D R STEEL CONSTRUCTION COMPANY PRIVATE LIMITED

M/s K.B. GURUNG

NARSINGH DEVELOPERS LLP

surendra infrastructure pvt ltd