Providing and laying of U.G. Cables for Main panel Room of Permanent stalls and feeder boxes near Gate at ITF Ground , Port Blair

Amount

Supplying of following size XLPE insulated armoured aluminium conductor UG cable of 1.1 KV grade conforming to IS 7098. Make : Havells/Polycab or its equivalent.

3.5 core X 70 sq.mm

3.5 core X 240 sq.mm

Laying of one number XLPE insulated armoured power cable of 1.1 KV grade of following size in the existing DWC HDPE/GI Pipe as required.

Above 35 sq.mm and upto 95 sq.mm

Above 185 sq.mm and upto 240 sq.mm

Laying of one number XLPE insulated armoured power cable of 1.1 KV grade of following size on surface as required.

Above 35 sq.mm and upto 95 sq.mm

Above 185 sq.mm and upto 240 sq.mm

Laying of one number XLPE insulated armoured power cable of 1.1 KV grade of following size direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

Upto 240 sq.mm

Supplying and laying of following size of DWC HDPE pipe, ISI marked along with all accessories like socket,tee, bend, couplers etc. conforming to IS 16205 (Part 24), 2018 (old IS 14930, Part 2,2001) completes with fitting and cutting, jointing etc. direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

77 mm dia (OD-77 mm & ID-63 mm nominal)

110 mm dia (OD-110 mm & ID-95 mm nominal)

Supplying and laying of following size of DWC HDPE pipe, ISI marked along with all accessories like socket,tee, bend, couplers etc. conforming to IS 16205 (Part 24), 2018 (old IS 14930, Part 2,2001) completes with fitting and cutting, jointing etc. on surface/wall including clamping etc as required.

77 mm dia (OD-77 mm & ID-63 mm nominal)

110 mm dia (OD-110 mm & ID-95 mm nominal)

Cutting road and making good the same including refilling etc as required and as directed by Engineer-in-Charge.

Supplying and laying of 100 mm GI pipe (Heavy duty).

Supplying and making end termination with aluminium lugs for following size of XLPE insulated armoured power cable of 1.1 KV grade

3.5 Core X 70 sq.mm

3.5 Core X 240 sq.mm

Fabrication, Erection, Testing & Commissioning of Outdoor type, floor mounted, Feeder box 100 amps, 415 volts, 50 Hz, 3 phase non-extendable type, double side door opening with locking arrangement and having canopy on top. The Feeder box shall be made up of 1.6 mm thick Colled Rolled Sheet Steel of size 1.2 m X 1.0 m X 0.40 m (minimum) mounted on MS frame made out of 35 x 35 x 5 mm MS angle and MS flat of size 30 X 5 mm (minimum) suitable for mounting including its supply as follows: a) 3 nos of 100 Amps Porcelain cutout with Neutral link - 1 set b) 100 Amp, TPN, Changeover switch.Make : Indoasian or its equivalent - 1 No c) Copper Busbar of size 25 x 5 mm (minimum) - 1 set d) 4 pole, 100 Amps Isolator. Make : Indoasian or its equivalent - 1 No. e) 6 A to 32 A rating, SP, MCB.Make : Indoasian or its equivalent - 6 Nos Panel should have provision for cable entry from bottom and shall be provided with additional base frame of 350 mm (minimum) at bottom. The panel should have provision for earthing connection, painted with 1 coat of primer and 2 coats of finishing water proof paint of approved colour and it also includes excavation, foundation of panel etc as directed by Engineer in Charge.

Fabrication, Erection, Testing & Commissioning of Outdoor type, floor mounted, Feeder box 100 amps, 415 volts, 50 Hz, 3 phase non-extendable type, double side door opening with locking arrangement and having canopy on top. The Feeder box shall be made up of 1.6 mm thick Colled Rolled Sheet Steel of size 1.0 m X 0.8 m X 0.40 m (minimum) mounted on MS frame made out of 35 x 35 x 5 mm MS angle and MS flat of size 30 X 5 mm (minimum) suitable for mounting including its supply as follows: a) 3 nos of 100 Amps Porcelain cutout with Neutral link - 1 set b) Copper Busbar of size 25 x 5 mm (minimum) - 1 set c) 4 pole, 100 Amps Isolator. Make : Indoasian or its equivalent - 1 No. d) 6 A to 32 A rating, MCB.Make : Indoasian or its equivalent - 6 Nos Panel should have provision for cable entry from bottom and shall be provided with additional base frame of 350 mm (minimum) at bottom. The panel should have provision for earthing connection, painted with 1 coat of primer and 2 coats of finishing water proof paint of approved colour and it also includes excavation, foundation of panel etc as directed by Engineer in Charge.

NAVJEEVAN ENTERPRISES

JOY GURU ENTERPRISES

M/s Sai Electrical Works