REPAIRS TO STEEL AND WOODEN FURNITURE AT BSO (SOUTH) UNDER GE (SOUTH) SECUNDERABAD

Amount

Dressing Table Incl Stool (FD/MAP-II/07) : Removing the existing unserviceable broken mirror from Dressing Table ladies and S&F new mirror 5 mm thick suitable for worn out existing frame all as specified, shown on drawing and directed by Engr-in-Charge. Drg No (FD/MAP-II/07).

Removing the worn out existing unserviceable frame of mirror and S&F new 1st class hard wood (Teak Wood) frame and replace the worn out plywood with 6 mm plywood commercial fixed with back side of the frame all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD/MAP-II/07).

Removing the worn out existing unserviceable box of Tale dressing ladies and S&F new box (Containing Top (Left/Right), Sides, Bottom, Center Part) made from 18 mm thick pre-laminated particle board and 4 mm thick teak wood beading on all around including polishing and providing back of box made from 6 mm thick plywood commercial all as specified and shown on drawing and directed by Engineer-in-Charge Drg No FD/MAP-II/07

Removing the worn out existing unserviceable doorshutter from dressing table ladies and S&F new door shutter made from 18 mm thick pre-laminated Particle Board for suitable and fitted with aluminium anodized knob and fixed with continous piano hinges with wooden screws and providing 4 mm thick teak wood beading all around including polishing all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD/MAP-II/07).

Removing the worn out existing unserviceable drawer from dressing table ladies and S&F new drawer complete made from 12 mm thick pre-laminated Particle Board for suitable, fitted with 6 mm thick plywood commercial on bottom side of drawer and providing aluminium anodized knob and providing 4 mm thick Teak Wood beading all round including polishing all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD/MAP-II/07).

Removing the existing unserviceable round plastic wheels from stool of dressing table ladies and S&F new round plastic wheels with suitable screws all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD/MAP-II/07).

Removing the worn out existing unserviceable stool of dressing table ladies and S&F new Stool complete and providing 4 mm thick Teak Wood beading all round including polishing and providing new round plastic wheels with suitable screws all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD/MAP-II/07).

Removing the existing unserviceable cushion from stool of dressing table ladies and S&F new cushion 75 mm thick suitable and stitched with tapestry cloth all as specified, shown on drawing and directed by Engr-in-Charge. (Tapestry cloth not less than Rs.250.00) Drg No (FD/MAP-II/07).

Bed Hard (FD/E6/MAP/08 (R) Removing the worn out existing unserviceable plywood from Bed hard and S&F new 12 mm thick plywood commercial BWR Grade of size 1980 x 900 mm fitted with screw on bottom side of bed hard and providing suitable 04 Nos Rubber shoes all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD/E6/MAP/08 R).

Removing the worn out existing unserviceable Head side/Foot side board made from 18 mm thick pre-laminated Particle Board and S&F new 18 mm thick pre-laminated Particle Board fitted with screws both sides all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD/E6/MAP/08 R).

Bin Linen Multipurpose Removing the worn out existing unserviceable box of Bin linen multipurpose and S&F new box (Containing Top (Left/Right), Sides, Bottom, Center Part) made from 18 mm thick pre-laminated particle board and 4 mm thick teak wood beading on all around including polishing and providing back of box made from 6 mm thick plywood commercial all as specified and shown on drawing and directed by Engineer-in-Charge Drg No FD/E6/MAP/09

Removing the worn out existing unserviceable drawer from Bin Linen Multipurpose and S&F new drawer complete made from 18 mm thick pre-laminated Particle Board of size 1200 x 450 mm and fitted with 6 mm thick Plywood commercial on bottom of drawer and providing 4 mm thick Teak Wood beading all round on top of drawer including polishing and providing new Aluminium anodized knob all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD/E6/MAP/09).

Removing the worn out existing unserviceable side door shutter from Bin Linen Multipurpose and S&F new side door shutter of size 675 x 450 mm made from 18 mm thick pre-laminated Particle Board for suitable and fitted with aluminum anodized knob and fixed with continuous piano hinges with wooden screws and providing 4 mm thick Teak Wood beading all round including polishing all as specified, shown on drawing and directed by Engr-in-Charge. Drg No (FD/E6/MAP/09).

Removing the worn out existing unserviceable door shutter from Bin Linen Multipurpose and S&F new door shutter of size 575 x 450 mm made from 18 mm thick pre-laminated Particle Board for suitable and fitted with aluminum anodized knob and fixed with continuous piano hinges with wooden screws and providing 4 mm thick Teak Wood beading all round including polishing all as specified, shown on drawing and directed by Engr-in-Charge. Drg No (FD/E6/MAP/09).

Removing the worn out existing unserviceable legs from Bin Linen Multipurpose and S&F new legs made from 18 mm thick pre-laminated Particle Board of size 75 x 450 mm with screw and providing 4 mm thick Teak Wood beading on bottom side including polishing all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD/E6/MAP/09).

Chair Varandah Removing unserviceable PVC seat/back from Chair Varandah and S&F new PVC seat/back 4 mm thick with weight not less than 1.85 Kg and grooves 90 x 10 mm (10 Nos) fixed properly including cleaning of surfaces of chair verandah with abrasive paper and applying one coat synthetic enamel paint colour white and providing of new 4 Nos of PVC hard shoes all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD/MAP-II/06)

Charpoy IP Hard Top Removing the worn out existing unserviceable plywood from Charpoy IP Hard top and S&F new 12 mm thick plywood commercial BWR Grade of size 1980 x 900 mm fitted with screw on bottom side of Charpoy IP Hard top and providing suitable 04 Nos Rubber shoes all as specified, shown on drawing and directed by Engr-in-Charge Drg No FD/MAP-II/01

Chair Dining JCOs / ORs Dismantling of unserviceable PVC seat from Chair Dining JCOs/ORs and S& F new PVC Seat 4 mm thick with holes and fitted with wooden screws all as specified, shown on drawing and directed by Engr-in-Charge Drg No FD/MAP-II/05

Dismantling of unserviceable Rear leg from Chair Dining JCOs/ORs and S& F new rear leg made of first class hard wood (teak), all the joints to be fixed with bamboo pins, wooden screws as required. On completion of repair the replaced member to be French polished with 2 coats of French polish to match with the original colour of the item after filling the cracks, joints & uneven surfaces with wax complete all as specified, shown on drawing and directed by Engr-in-Charge. Drg No FD/MAP-II/05

Description all as per Ser item No.18 above, but front leg of Chair Dining JCOs/ORs all as specified, shown on drawing and directed by Engr-in-Charge Drg No FD/MAP-II/05

Description all as per Ser item No.18 above, but side rail of seat of Chair Dining JCOs/ORs including drilling holes at 12.5mm C/C for canning all as specified, shown on drawing and directed by Engr-in-Charge. Drg No FD/MAP-II/05

Description all as per Ser item No.18 above, but for front and rear rail of seat of Chair Dining JCOs/ORs including drilling of holes at 12.5mm C/C for canning all as specified, shown on drawing and directed by Engr-in-Charge. Drg No FD/MAP-II/05

Description all as per Ser item No.18 above, but for stiffner of Chair DiningJCOs/ORs all as specified, shown on drawing and directed by Engr-in-Charge. Drg No FD/MAP-II/05 .

Description all as per Ser item No.18 above, but for back rest of Chair Dining JCOs/ORs all as specified, shown on drawing and directed by Engr-in-Charge. Drg No FD/MAP-II/05

Description all as per Ser item No.18 above, but for 1st Class teak wood Brackets of size 75x75x25mm of Chair Dining JCOs/ORs all as per drawing, as specified and directed by Engr-in-Charge. Drg No FD/MAP-II/05

Table Bed Side (FD/E6/MAP/15) Removing the worn out existing unserviceable sides from Table Bed Side and S&F new sides made from 18 mm thick pre-laminated Particle Board for suitable with screw and providing 4 mm thick Teak Wood beading all round including polishing all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD/E6/MAP/15).

Removing the worn out existing unserviceable Top from Table Bed Side and S&F new Top made from 18 mm thick pre-laminated Particle Board for suitable with screw and providing 4 mm thick Teak Wood beading all round including polishing all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD/E6/MAP/15).

Removing the worn out existing unserviceable Bottom from Table Bed Side and S&F new bottom made from 18 mm thick pre-laminated Particle Board for suitable with screw and providing 4 mm thick Teak Wood beading all round including polishing all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD/E6/MAP/15).

Removing the worn out existing unserviceable back from Table Bed Side and S&F new back made from 6 mm thick plywood commercial all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD/E6/MAP/15).

Removing the worn out existing unserviceable Top drawer from Table Bed Side and S&F new drawer complete made from 18 mm thick pre-laminated Particle Board and fitted with 6 mm thick Plywood commercial on bottom of drawer and providing 4 mm thick Teak Wood beading all round on top of drawer including polishing and providing new Aluminium anodized knob all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD/E6/MAP/15).

Removing the worn out existing unserviceable Bottom drawer from Table Bed Side and S&F new drawer complete made from 18 mm thick pre-laminated Particle Board and fitted with 6 mm thick Plywood commercial on bottom of drawer and providing 4 mm thick Teak Wood beading all round on top of drawer including polishing and providing new Aluminium anodized knob all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD/E6/MAP/15).

Charpoy GI Pipe with ply top Removing the existing worn out unserviceable ply top from Charpoy GI Pipe and Re-tightening the charpoy to shape and fitted with existing iron stiffeners at already welded angle with the nut bolts and supply & fix 12mm thick plywood BWR grade of size 1980x900mm duly fitted with 5mmx35mm long nut bolt half round head on charpoy and two coats of synthetic enamel paint black on angle iron and flat stiffener all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD-220).

Removing the unserviceable check nut and S&F new 6mm thick GI medium grade check nut suitable for 32mm dia GI Pipe, all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD-220).

Removing the unserviceable 03 way GI elbow and S&F 32mm dia medium grade 03 way GI elbow duly ISI marked complete as shown on drawing. Drg No (FD-220).

Removing the existing unserviceable long rail and S&F with new long rail of 32mm diaGI pipe medium grade of approved make of size 1980mm including cutting and threading and bringing the Charpoy to the original shape all as specified, shown on drawing and directed by Engr-in-Charge. Drg No (FD-220).

Making short rail from the unserviceable long rail obtained out of item No. 35 above Including cutting, threading and fixing complete after removing the existing U/S short rail all as specified, shown on drawing and directed by Engr-in-Charge Drg No (FD-220).

Making leg from unserviceable short rail obtained out of item No 35 above including cutting threading at one end and other end shall be fixed 3mm thick MS base plate duly welded at bottom and providing 3mm thick MS ring with 16 gauge base plate to hold MNF set duly painting with two coats of synthetic enamel black paint over one coat of red oxide primer to exposed surface of MS rings and base plate and fixing complete after removing the existing U/S legs all as specified, shown on drawing and directed by Engr-in-Charge. Drg No FD-220

Dismantling of unserviceable Hydraulic cylinder of Chair Revolving adjustable steel / computer chair by supply and fix new Hydraulic cylinder for chair Revolving adjustable steel , Computer chair , computer executive, chair high back and chair push back all as specified, shown on drawing and directed by Engr-in-Charge Drg No. TP/PCH 7001/7002/9101R.

Dismantling of unserviceable PU base with caster wheels of Chair Revolving adjustable steel / computer chair by supply and fix new PU base with caster wheels for chair Revolving adjustable steel , Computer chair , computer executive, chair high back and chair push back all as specified, shown on drawing and directed by Engr-in-Charge Drg No. TP/PCH 7001/7002/9101R.

Dismantling of unserviceable Cushion and Tapestry cloth for Seat by supply and fix new Cushion 50 mm thick, 32 density with new Tapestry cloth duly stiched properly as per original shape for Seat of chair Revolving adjustable steel , Computer chair , executive chair high back and chair push back of all as specified, shown on drawing and directed by Engr-in-Charge Drg No. TP/PCH 7001/7002/9101R.

Dismantling of unserviceable Cushion and Tapestry cloth for back by supply and fix new Cushion 50 mm thick, 32 density with new Tapestry cloth duly stiched properly as per original shape for back of chair Revolving adjustable steel , Computer chair , executive chair high back and chair push back of all as specified, shown on drawing and directed by Engr-in-Charge Drg No. TP/PCH 7001/7002/9101R.

Dismantling of unserviceable Push back base by supply and fix new Push back base of chair Revolving adjustable steel , Computer chair , executive chair high back and chair push back of all as specified, shown on drawing and directed by Engr-in-Charge Drg No. TP/PCH 7001/7002/9101R.

Dismantling of unserviceable PU Arms by supply and fix new PU Arms of chair Revolving adjustable steel , Computer chair , executive chair high back and chair push back of all as specified, shown on drawing and directed by Engr-in-Charge Drg No. TP/PCH 7001/7002/9101R.

Dismantling of unserviceable Caster wheels by supply and fix new Caster wheels of chair Revolving adjustable steel , Computer chair , executive chair high back and chair push back of all as specified, shown on drawing and directed by Engr-in-Charge Drg No. TP/PCH 7001/7002/9101R.

SN POWER TECH

K APPAJI KUMAR AND CONSTRUCTIONS

ramesh construction co

sree ramawood furniture works

Sri Surya Enterprises

ANJALI CONSTRUCTIONS