MAINTENANCE AND REPAIRS TO PLUMBING, SANITARY FITTINGS, JOINERY, SUNKEN TREATMENT FOR OTMS IN TECHNICAL/DOMESTIC AREA AT AF STN CHANDIGARH

Amount

M&L disconnecting existing water tanks of capacity exceeding 500 litres but not exceeding 1000 litres, draining out of water, setting aside (or lowering if required) for repair/ cleaning and removing accumulated sludge/ dirt scales from bottom & sides and from mouths of circulating pipes of service tanks located on roof of building and disinfecting the tank using bleaching powder to make the tank bacteria free, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground ‘Cleaned on (date)’; height of words 100mm and hoisting if required, refixing and reconnecting in position after cleaning complete all as specified and directed.

M&L disconnecting existing water tanks of capacity exceeding 250 litres but not exceeding 500 litres, draining out of water, setting aside (or lowering if required) for repair/ cleaning and removing accumulated sludge/ dirt scales from bottom & sides and from mouths of circulating pipes of service tanks located on roof of building and disinfecting the tank using bleaching powder to make the tank bacteria free, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground ‘Cleaned on (date)’; height of words 100mm and hoisting if required, refixing and reconnecting in position after cleaning complete all as specified and directed.

Dismantling water tanks exceeding 250 litres but not exceeding 500 litres capacity and removing from site, complete all as specified and directed.

Dismantling water tanks exceeding 500 litres but not exceeding 1000 litres capacity and removing from site, complete all as specified and directed.

S&F rotational moulded polyethylene triple layer water storage tanks (cylindrical vertical with closed top) of capacity 500 litres including inlet pipe, outlet pipe, drain pipe with plug and 20mm dia (PTMT high pressure wt 210 gms) with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe 20mm bore complete all as specified and directed

S&F rotational moulded polyethylene, water storage tanks (cylindrical vertical with closed top) triple layered, of capacity 1000 Litres including inlet pipe and plug, outlet, and drain pipe with plug and 20mm dia ball valves (PTMT high pressure wt 210 gms) with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe 20mm bore all as specified and directed.

S&F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20mm bore and fixed (Minimum weight 210gms.) complete all as specified and directed.

S&F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 15mm bore and fixed minimum weight 142gms complete all as specified and directed.

Taking up or down steel tubing and connections, size 15mm bore including cleaning for refixing or removal to stores, complete all as specified and directed.

Taking up or down steel tubing and connections, size 20mm bore including cleaning for refixing or removal to stores, complete all as specified and directed.

Taking up or down steel tubing and connections, size 25mm bore including cleaning for refixing or removal to stores, complete all as specified and directed.

M&L galvanised mild steel tubing 15mm bore 'medium grade' with all fittings and fixed complete to wall and ceiling or laid under floor including cutting existing steel tubing & screwing, if required for alterations and additions complete all as specified and directed.

M&L galvanised mild steel tubing 20mm bore 'medium grade' with all fittings and fixed complete to wall and ceiling or laid under floor including cutting existing steel tubing & screwing, if required for alterations and additions complete all as specified and directed.

M&L galvanised mild steel tubing 25mm bore 'medium grade' with all fittings and fixed complete to wall and ceiling or laid under floor including cutting existing steel tubing & screwing, if required for alterations and additions complete all as specified and directed.

Taking down eaves, gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to wall with suitable size of mild steel clamp and screw, including making good mouth of rain water pipe in cement mortar (1:3) or PCC (1:2:4) complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to wall with suitable size of mild steel clamp and screw, including making good mouth of rain water pipe in cement mortar (1:3) or PCC (1:2:4) complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F 110mm dia PVC (SWR) bends any radius, complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends any radius, complete all as specified and directed.

S&F mild steel work as in bands, straps, supports/ stays and clamps for rain water pipes and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified.

S&F in repairs, vitreous china half stall type urinal white including providing fixing plugs, bedding urinals against wall in cement mortar (1:2), securing urinal to plug with and including 60mm long brass screws, pointing around urinal back including provision of waste coupling PTMT half or full threaded suitable for urinals, complete all as specified and directed.

S&F in repair wash basins, vitreous china (flat back type) of size 550mm x 400mm, including cutting for and pinning in ends of brackets or erecting stand, supply & fixing of waste pipe with waste coupling 32mm of PTMT (half or full threaded) (Minimum weight for waste coupling 45gms) complete all as specified and directed.

S&F vitreous china counter top (self rimming) wash hand basin, white in colour of size 630mm x 500mm including circular cutting and tucked in granite slab including 15mm dia cast copper alloy chromium plated fancy type single lever basin mixer, 32mm dia brass CP waste fitting and connections to waste pipe and water pipe complete all as specified and directed. Make: Hindware, Model: RHAPSODY, Cat No: 10045 or equivalent in Cera.

S&F in repair vitreous chinaware wash down water closet squatting pan (Orissa pattern/ Indian type) of size 580mm x 440mm, white, with integral foot rests (excluding flushing cistern and flush pipe) but including 100mm CI ‘P’/ ‘S’ trap), set and jointed including embedding concrete and removal of old from site complete all as specified and directed.

S&F in repair, vitreous china wash down water closet EWC (pedestal pattern) white connected to drain outlet including fixing bolts, plastic seat and cover white with mild steel chromium plated or anodized hinging devices and removal old from site complete all as specified and directed.

S&F in repairs single piece EWC with PP soft close seat cover, hinges, fixing accessories and accessories set cistern fittings of size 370mm x 690mm x 680mm including ‘S’ trap 300mm, including connected to drains outlet, complete all as specified and directed. Make: Jaquar Cat No. CNS-WHT-851S300SPP or equivalent in Parryware/ Cera as approved by GE.

S&F in repairs plastic water closet seat black/ white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices complete all as specified and directed by Engineer-in-Charge.

S&F repairs PVC low level, flushing cistern white, valveless, symphonic action type, 10 litre capacity with inlet, ball valve, float and handle including PVC flush pipe 32mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connection to water supply pipe line and WC complete all as specified and directed.

S&F in repair stop angle valve, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair bib taps long body (fancy type), cast copper alloy chromium plated with capstan head, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm dia bore and fixed complete all as specified and directed.

S&F in repair, pillar taps, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm dia bore and fixed with WHB and connection to iron pipe complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 20mm dia, ‘D’ type, 600mm long between flanges, fixed to walls with screws and plastic cleats complete all as specified and directed.

S&F in repairs 450mm long PVC connections with PTMT nuts & washers on both ends suitable for 15mm size pipe and removal of old from site complete all as specified and directed.

S&F in repairs 600mm long PVC connections with PTMT nuts & washers on both ends suitable for 15mm size pipe and removal of old from site complete all as specified and directed.

S&F in repairs stainless steel sinks with drainage board made out of 1.00mm thick sheet for kitchen with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32mm dia and making good to disturbed surfaces complete all as specified.

S&F in repairs grating 125mm dia (Minimum weight 40 gms) with or without waste hole of PTMT fixed on floor/ nahani trap with cement mortar complete all as specified and directed.

S&F in repairs PTMT waste coupling suitable for 32mm bore discharge pipe & flexible pipe suitable for WHB/ urinal complete all as specified and directed.

S&F in repairs PVC flexible waste pipe suitable for WHB/ Sink/ Urinal complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints including fixing with 15mm bore pipe complete all as specified.

S&F in repairs stainless steel chromium plated jet including PVC pipe of suitable length for European/ Pedestal type WC including all accessories complete all as specified and directed.

S&F in repairs hand shower (Health faucet) cast copper alloy chromium plated with and including 8mm dia 1.00 meter long PVC flexible tube and hook complete all as specified and directed. Make: Prayag/ Parryware/ Cera.

S&F in repairs stainless steel chromium plated soap dish with glossy finish complete all as specified and directed.

S&F in repairs brass chromium plated wall mixer with telephone shower arrangement 15mm bore for mixing hot or cold water, screwed down for iron pipe for wall, including connections to shower and making good the disturbed surfaces complete all as specified and directed.

S&F brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe for WHB, including connections to WHB and making good the disturbed surfaces fixed in repairs complete all as specified and directed.

S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20mm dia and fixed complete all as specified and directed.

S&F in repair 15mm dia stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with long shank and cup (concealed type), screwed both ends for iron pipe or for unions and fixed, including cutting to wall tiles or brick work and making good the disturbed portion in cement mortar (1:3) complete all as specified and directed.

Demolition of brick masonry work built in cement mortar including all quoins, arches, pillars, staging etc. including segregating and stacking serviceable bricks for re-use and removal of rubbish/ brick bats outside defence land complete all as specified and directed.

M&L brick work with old size fly ash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone walls or concrete surfaces, etc, any description including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish outside MoD land complete all as specified and directed.

M&L rendering 15mm thick plaster in cement mortar (1:6), on brick/ concrete surfaces as on walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick in cement mortar (1:4) mixed with water proofing compound as per manufacturer’s instructions on brick/ concrete surfaces as on walls complete all as specified and directed. Note: Supply only of water proofing compound shall be measured and paid for separately.

M&L rendering 10mm thick in cement mortar (1:3) on brick/ concrete surfaces of fascia, facade, roof ceiling and chajja etc. finished even and fair without using extra cement, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and removing debries outside MD land complete all as specified and directed.

M&L plain cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregates) as in roof kerb, benching, padding and like mixed with and including water proofing compound @ 3% by weight of cement complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection and similar work etc. complete all as specified and as directed.

M&L for preparation of old plastered/ unplastered surfaces of walls including brooming down or steel wire brushing, scraping down smoke soots, moss and efflorescent salts and trading oil and greasy spots etc. washing, rubbing down and stopping of surfaces using sand paper and applying two coats of oil bond distemper, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of first quality oil emulsion distemper over and including one coat of chalk whitening preparatory to distempering complete all as specified and directed.

M&L for preparation of old plastered/ unplastered surfaces of ceilings, including brooming down or steel wire brushing, scraping down smoke soots, moss and efflorescent salts and treating oil and greasy spots etc. and applying one coats of oil bond distemper complete all as specified and directed.

M&L for preparation of old plastered/ unplastered surfaces of ceiling including brooming down or steel wire brushing, scraping down smoke soots, moss and efflorescent salts and trading oil and greasy spots etc. washing, rubbing down and stopping of surfaces using sand paper and applying two coats of white wash complete all as specified and directed.

M&L for preparation of old plastered/ unplastered surfaces of wall including brooming down or steel wire brushing, scraping down smoke soots, moss and efflorescent salts and treating oil and greasy spots etc. washing, rubbing down and stopping of surfaces using sand paper and applying one coats of white wash complete all as specified and directed.

M&L for preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted wooden or wood based surfaces over 10cm width or girth of any description and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for 75mm thick plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protection, laid to slope of 1:20, finished fair & even, with and including 10mm wide joints to full depth @ 2.5m c/c and at corners, filled with mastic mortar, complete all as specified and directed.

Dismantling floor, hearth or wall tiling, chequered tiles etc. including cement mortar bedding and removing rubbish off the premises of MD land complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in floors finished fair and even complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 using 12.5mm graded stone aggregates mixed with and including integral water proofing compound @ 3% by weight of cement as in padding concrete to sunken floor, coving/ gola at junction of the floor/ terrace and walls including chamfering on edges, complete all as specified and directed. Note:- Supply only waterproofing compound shall be measured and paid separately.

M&L lime concrete 1:2 with 40mm graded brick aggregate as in filling in floors complete all as specified and directed.

Supply only integral water proofing compound

M&L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed

S&F first quality glazed designer pattern coloured ceramic tiles of size 450mm x 350mm x 7mm or 450mm x 300mm x 7mm thick fixed in pattern to wall (combination of dark and light colour with border) as in skirting/ dado laid over and including 10mm thick cement plaster (1:3) as backing coat and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for double charged dark shade vitrified ceramic coloured tiles 10mm thick (square/ rectangular) area of each tiles exc. 0.36 Sqm, but n. exc. 0.42 Sqm laid in floors with neat cement slurry @ 3.00 kg/ Sqm over and including 15mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified. Make: Vitro of Somany or equivalent in Asian/Johnson/Kajaria.

M&L for double charged vitrified ceramic coloured tiles, 10mm thick (square/ rectangular) area of each tile exc. 0.36 Sqm but n. exc. 0.42 Sqm as in skirting, set and jointed in neat cement slurry laid over and including 10mm thick rendering of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles complete all as specified. Make: Vitro of Somany or equivalent in Asian/ Johnson/ Kajaria.

M&L for chequered cement concrete tiles 300mm x 300mm x 25mm thick with gray cement and pigment, set, jointed and pointed in neat cement slurry in floors etc. complete all as specified and as directed.

M&L cutting chases, pinning in brick, stone or concrete surfaces of wall, floor or slab and making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed water tubing and making good, cutting not exceeding 10cm girth and removal of rubbish outside MD land complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc. complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block with gray cement and pigment of any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade etc complete all as specified and as directed.

M&L for demolition of cement Concrete un reinforced in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 100mm thick plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.

M&L for 25mm thick sand cushioning/ filling under floor or in foundation including watering and consolidation complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position and removal of debris off the premises upto a distance not exceeding 50metres including separating, scraping and cleaning of reinforcement complete all as specified and directed.

M&L for RCC (1:1½:3) type A-1 using 20mm graded crushed stone aggregate as in beams, chajjas, shelves, cantilevers, bressumers, lintels over 1.5m clear span, complete all as specified and directed. Note: Reinforcement steel bars and form work shall be measured and paid separately.

Use and waste, form work to sides & soffits of lintels, counter slabs, shelves & chajjas, etc. for rough finished flat surfaces complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 sqm each with shutters without taking off shutters from the frame and removing from site being contractor’s property as per schedule of credit complete all as specified and directed.

Taking down shutters of any description n.exc 1.00sqm each and removing from site as in schedule of credit, complete all as specified and directed.

M&L for cutting holes in brick walls built in cement mortar for inserting hold fasts, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exceeding half brick but not exceeding one brick and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, complete all as specified and directed. Note:- Item applicable for insertion of hold fasts at new position only.

S&F factory made pressed steel frames for doors with one or more rebates of frame 125mm x 60mm made out of 1.25mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in filling in pressed steel frames, fixing of hold fasts etc. complete all as specified and directed.

S&F factory made flush shutters 30mm thick, with block board core and plywood face panels, commercial type on both faces complete all as specified and directed.

S&F 40mm thick 1st class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats framing is moulded on solid (for each side) etc complete all as specified and directed.

S&F factory made box type steel window with two No. 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-184-2012 sheet 1/3 to 3/3.

S&F factory made box type steel window with two Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars, including flat iron 12 x 3mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No. CEAF/STD-185-2012 sheet 1/2 to 2/2.

S&F in opening, solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick(stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face all as specified and directed.

S&F butt hinges, extruded aluminum alloy, anodised, with galvanised mild steel hinge pin, type C-21,100mm size, ISI marked, complete all as specified and directed.

S&F 150mm long, aluminium anodised, barrel tower bolts of extruded section and fix to wooden or PVC doors, complete all as specified and directed.

S&F 200mm long, aluminium anodised, barrel tower bolts of extruded section and fix to wooden or PVC doors, complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 125mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F sliding door bolts 300mm long of extruded sections aluminum alloy, anodised with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy dia of bolt not less than 12mm complete all as specified and directed.

S&F in repairs 300mm long ordinary rat rail rod pattern MS door springs including roller and roller plate complete all as specified and directed.

M&L for 100mm thick plaster of paris (POP) cornices to junction of wall and ceiling including preparation of surfaces to receive cornices and finishing the disturbed surfaces to match with similar specification as per existing; design and pattern of cornices as directed by Engineer-in-Charge.

S&F plain fillets square, rectangular or triangular in section, 2nd class hardwood of sectional area exc. 6 & n. exc. 13 Sqcm, clean swan, wrought finished secured with screws, complete all as specified and directed.

S&F in repair, continuous (piano) hinges of mild steel, bright finish or electro galvanised, width of flap 30mm (when open) complete all as specified and directed.

S&F hasp and staples, 100mm size, safety type, aluminum anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F in repair, hasp and staples, 100mm size, safety type, aluminum anodised with mild steel hinge pin, including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F 40mm dia cupboard knobs fixed with nut, washers/ screws etc. of brass polished complete all as specified and directed.

S&F in repair 40mm dia cupboard knobs fixed with nut, washers/ screws etc. of brass polished complete all as specified and directed.

S&F in repair magnet catcher suitable for kitchen cabinet/ cupboard with steel plate and stainless steel screws as required complete all as specified and directed.

S&F in repair mild steel frame work such as grills, gratings etc. with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings and similar work conforming to Fe-290 Grade E-165 quality complete all as specified and directed.

S&F in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks or stainless steel wire staples or fixed to wooden frame with first class hard wood bead complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins etc. complete all as specified and directed.

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.

S&F figured glass 4mm thick, pin headed type and glazing with oil putty or wooden beads in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.

S&F in repairs 2mm thick fibre glass reinforced translucent (Polycarbonate) plain sheeting with lap fixed with coach screw and washer as in windows, in roof, wall etc. fixed with self tapping screws, L-type or J-type or cranked hook bolts in roofs, walls etc. complete all as specified and directed.

M&L for preparation of new wooden or wood based surface of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F in repairs drapery rod of stainless steel 25mm dia ribbed/ fancy type including brackets and finials etc. as required complete all as specified and directed.

S&F in repairs, drapery rod of mild steel (PVC coated) 25mm dia ribbed/ fancy type including brackets and finials etc. as required complete all as specified and directed.

M&L for granite 20mm thick (table rubbed and polished) in steps, window-cills, cooking platforms, counter-slabs and like; set in neat cement slurry @ 3Kg/ Sqm, laid over and including 15mm thick bedding layer/ backing coat in cement mortar (1:4), pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting for counter WHB, moulding the corners/ edges and making holes for cooking gas pipe etc. complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25mm thick laid over and including 15mm thick cement screed base in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F in repairs 18mm/ 19mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18mm wide 6mm thick beading of 1st class HW (Teak) all around complete all as specified and directed.

M&L for welding in repairs exc. 2.5cm but n. exc. 5cm in length and thickness of metal to be welded n. exc. 6mm complete all as specified and directed.

M&L for running welding in repairs thickness of metal to be welded exc. 6mm but n. exc. 9mm complete all as specified and directed.

S&F in repairs 300mm long brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F in repairs 250mm long brass barrel tower bolt with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

S&F in repairs 100mm size butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.

S&F in repair 150mm long floor door stopper of brass body and tongue with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F in repairs ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs 150mm long extruded brass handles, fabricated type polished complete all as specified and directed.

S&F in repairs solid PVC Wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including cleaning and making good the disturbed surfaces of wall/ other surfaces complete all as specified and as directed.

S&F in repairs 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing etc complete all as specified and as directed.

S&F in repairs anodised aluminium snap grid frame work for false ceiling fixed in repairs all as specified and as directed.

M&L for perforated particle board/ tiles for insulation and acoustic purposes 60cm x 60cm in size fixed with screw to timber framework or with staples on snap grid etc as in repairs complete all as specified and as directed.

S&F hangers 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long fixed in repairs complete all as specified and directed.

S&F in repairs floor door stopper 140mm overall cover plate length of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed

S&F in repairs door closer hydraulically regulated, designation No. 3, aluminium body universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repairs shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300gms) complete all as specified and directed

B N FRIENDS AND CO

Baba Engineers and Contractors

MOHAMMAD RASHID