Supply and Delivery of 5Hp motor and compressor, Submersible pumpset, Eb Service line work, construction of motor room, supply, delivery,laying of pipe line work at Ramanathapuram, kutty karadu in Division 37 Ammapet Zone

Amount

Supply and delivery of Three phase Submersible pump as per IS 8034 with ISI standard specification, the Duty Condition are 10 HP submersible motor and pumpset, etc. complete including all cost and conveyance etc. complete {PWD SR P.No.105 Sl.no.D,I.no.409} (Pump Only)

Supply and delivery of following HDPE,GI pipes and specials and other particulars ISI standard etc,.

50mm NRV {TWAD SR P.No.45}

50mm GI Elbow {TWAD SR P.No.44}

16mm Dia × 70mm Lenth bot and nuts {TWAD SR P.No.43}

Thread Ball {TWAD SR P.No.160}

Shellac {TWAD SR P.No.160}

Insulation Tape {TWAD SR P.No.160}

50mm Gate Valve {TWAD SR P.No.45}

65mm*50mm GI Reducer Bush {TWAD SR P.No.41}

63mm PVC Pipe {PWD SR P.No.99}

63mm PVC MTA

63mm PVC FTA

Ms Clamps

50mm Hd Collar

50mm Hd Connector

Removal of centrifugal pumpset/ jet pumps/ submersible pumpsets and its accessories from borewell/ open well for attending repairs 50% of the rates mentioned under item 17 (a), (b) and (c) may be allowed for the respective Horse power(10HP). {TWAD SR P.No.308 Item No.17d} i.Ramanathapuram

Re- erection of centrifugal pumpset/ jet pumps/ submersible pumpsets and its accessories from borewell/ open well for attending repairs 50% of the rates mentioned under item 17 (a), (b) and (c) may be allowed for the respective Horse power(10HP). {TWAD SR P.No.308 Item No.17d (ii)} i.Ramanathapuram

Construction of motor room

Crushed Stone Sand (Commercially called M-Sand) {PWD SR. P.No.17}

Fly Ash Bricks (230 x 110 x 70mm) {PWD SR. P.No.14}

SRC Cement (Sulphate Resistant Cement) {PWD SR. P.No.35}

Cuddapah Slab 50mm Thick {PWD SR. P.No.17}

Supply of Gi Sheet Door

White Wall Putty Powder {PWD SR. P.No.45}

Exterior Emulsion Paint

Painter / Varnisher-I Class {PWD SR. P.No.10}

Painter / Varnisher-II Class {PWD SR. P.No.11}

Labour charges for construction

Skilled Mason Class-I for Heritage Work {PWD SR. P.No.10}

Mason for Brick Work-I Class {PWD SR. P.No.10}

Mazdoor Category-I {PWD SR. P.No.11}

Supply and fixing of TNEB meter board suitable for three phase service connection with 3 Nos. fuse unit (500V) neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit etc, complete. i.Kutty Karadu

7/20 Wire {Ele Data.SR.P.No 58}

Stay Wire {Ele Data.SR.P.No 35}

Binding Wire {Ele Data.SR.P.No 35}

Four Way Reel

Insulation Tape {TWAD SR P.No.160}

63A Fuse Unit {Ele Data.SR.P.No 58}

63A MCB FP {PWD SR P.No.132}

Four Pole MCB Box

32mm GI Pipe {TWAD SR P.No.40}

32mm Gi Tee {TWAD SR P.No.44}

32mm Gi Elbow {TWAD SR P.No.44}

32mm Gi Coupling {TWAD SR P.No.44}

32mm Gi Bend {TWAD SR P.No.44}

TW plank of size 600mm x 450mm x 19mm with supporting reepers of 1" thick on both side with painting and with bolt, nut and washer{Ele Data.SR.P.No 58}

Teek Wood Plugs {PWD SR P.No.55}

Screw {PWD SR P.No.38}

Ceramic Insulator 1"

63A neutral link {Ele Data.SR.P.No 59}

Earth link (1" x 1/8") copper flat {Ele Data.SR.P.No 59}

Earth connection {Ele Data.SR.P.No 59}

T Bolts and Nuts

32mm WL Clamps

2.5 sqmm Copper Wire {TWAD SR P.No.203}

Labour Charges

Wireman Grade I {TWAD SR P.No.15}

Wireman Grade II {TWAD SR P.No.16}

Supply and delivery of three phase 5hp Electric and induction motor with 5HP Compressor set including other conveyance etc, complete.

Supply and Delivery of Three Phase (440V) DOL Starter and including other conveyance etc, complete.i.Kutty Karadu.

Supply and Delivery of following (Gi, PVC, HDPE) Pipes and Specials at i.Kutty Karadu.

32mm GI Pipe {TWAD SR P.No.40}

32mm Gi Pipe Cutting {TWAD SR P.No.272}

32mm Gi Pipe Threading {TWAD SR P.No.272}

20mm GI Pipe {TWAD SR P.No.40}

20mm Gi Pipe Cutting {TWAD SR P.No.40}

20mm Gi Pipe Threading {TWAD SR P.No.40}

40mm HDPE Hose {PWD SR P.No.105}

20mm HDPE Hose {PWD SR P.No.105}

32mm HDPE Hose {PWD SR P.No.105}

25mm GI Pipe {TWAD SR P.No.40}

25mm Gi Pipe Cutting {TWAD SR P.No.40}

25mm Gi Pipe Threading {TWAD SR P.No.40}

20mm GI Elbow {TWAD SR P.No.44}

20mm Gi Coupling {TWAD SR P.No.44}

20mm Gi union {TWAD SR P.No.44}

20mm*15mm Gi Reducer {TWAD SR P.No.47}

32mm Gi Union {TWAD SR P.No.44}

32mm Gi Elbow {TWAD SR P.No.44}

32mm*25mm Reducer {TWAD SR P.No.47}

25mm Gi Tee {TWAD SR P.No.44}

32mm Gi Coupling {TWAD SR P.No.44}

25mm Gi Elbow {TWAD SR P.No.44}

25mm Gi coupling {TWAD SR P.No.44}

20mm Gi Bend {TWAD SR P.No.44}

Thread {TWAD SR P.No.160}

Shallac {TWAD SR P.No.160}

TW plank of size 375mm x 300mm x 19mm with supporting reepers of 1" thick on both side with painting and with bolt, nut and washer {Ele Data.SR.P.No 58}

Bore well cap Ms 5" {TWAD SR P.No.299}

20mm Gi B.Nipple 24"

20mm Gi B.Nipple 18"

20mm Gi B.Nipple 12"

20mm Gi B.Nipple 6"

32mm HD Collar

15mm HD Collar

40mm*20mm PVC Foot Valve

32mm Bore Well Clamp

20mm Bore Well Clamp

32mm Gi B.Nipple 24"

32mm Gi B.Nipple 6"

25mm Gi B.Nipple 24"

25mm Gi B.Nipple 18"

25mm Gi B.Nipple 6"

25mm HD Collar

32mm PVC Ball Valve

32mm Gi B.Nipple 36"

25mm PVC Ball Valve

20mm Gi B.Nipple 6"

25mm PVC Tank Nipple

Charges for 5 HP compressor and electric induction motor with proper arangements, bolt and nuts other paticulars etc, complete.

Mechanic-I Class {TWAD SR.P.No.10}

Mechanic-II Class {TWAD SR.P.No.11}

Charges for pipe line laying with proper arangements and other paticulars etc, complete.

Fitter (Pipe Laying / Bar Bending)-I Class {TWAD SR.P.No.9}

Fitter (Pipe Laying / Bar Bending)-I Class {TWAD SR.P.No.11}

Sri Enterprises