Construction of Community Hall in South Side Sriram Nagar at Seelayampatti in Theni Block at MLACDS 2022-2023

Amount

Earth work excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting with initial lead and lift etc., complying with standard specification as per SS 20 B.

Refilling with excavated earth in layers of not more than 15cm thick well rammed,watered and consolidation etc

Supplying and filling in foundation and basement with filling with Red Gravel including cost and conveyance and all charges etc

Plain Cement Concrete 1:4:8 using 40 mm HBG metal for basement and flooring layers not more than 15 cm thick including cost and conveyance of materials to site and all other labour charges including consolidation as per standard specification

Brick work in CM 1 : 5 using country bricks ground moulded of size 23 x 11 x 7 cm including cost and conveyance of materials to site and all other labour charges as per standard specification.

Supply and errection of Centering and Shuttering including necessary supports for plane surface using mild steel sheets of size 90 x 60 cm and 10 gauge stiffened, welded with steel angles and supported by casuarina props of 10 cm to 13 cm dia spaced at 75cm of all etc complete.,

Supplying fabricating and placing in position mild steel or ribbed steel for all reinforced concrete works as per the design given including cost of steel and binding wire and all other labour charges as per standard specification.

Reinforced cement concrete 1:1.5 :3 mix using 20 mm HBG metal for all RCC items of works excluding cost of reinforcement and fabricating charges, centering and shuttering but including curing etc., as directed by the department officers as per standard

Fabrication and supply of MS Door of any required size with Double leaves outer frame made of 35 x 35 x 5 mm equal MS ‘L’ angle for horizontal and vertical members and the shutter frame strengthened by stiffeners of 2 nos. horizontal and 3 nos. diagonal ( SOR 2019-20 P.No :- 49 ( 121 A))

Fabrication and supply of MS Windows and Ventilators of any required size with three leaves outer frame made of 35 x 35 x 5 mm equal MS ‘L’ angle mullion section made of 35 x 35 x 5 mm equal ‘T’ section shtter frame made of 25 x 25 x 5 mm equal MS ‘L’ angle for horizontal Window -1.50x1.30 M

Ventilator 0.90x 0.45 M

Fixing in position Mild Steel Door including Joineries and all other labour charges etc. complete as per standard specifications.

Fixing in position Mild Steel Ventilator including Joineries and all other labour charges etc. complete as per standard specifications.

Floor finish with ceremic Tiles laid in cement mortar 1:3, 20mm thick with pointing by white cement including cost and conveyence and labour charges etc.,

Dadooing the wallswith glassed tiles laid in cement mortar 1:2 with pointing by white cement including cost conveyence and labour charges etc.,

Plastering in CM 1:3,mix using 10 mm thick , including cost and conveyance of all materials to site and all other labour charges including curing etc., as per standard specification.

Plastering in CM 1:5,mix using 12 mm thick , including cost and conveyance of all materials to site and all other labour charges including curing etc., as per standard specification.

Weathering course concrete using best quality broken brick jelly of size 20mm uniform guage in pure slaked lime (no sand to be used)over the RCC roof slab in the proportion of brick jelly to lime being 32:12:5 by volume and laid over in a single layer and consolidated to the required designed and finished thickness beating the concrete with wooden beaters of approved pattern ,keeping the surface constantly wetted by sprinkling lime jaggery water as per standard specifications etc., complete as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 20 cm x 20 cm x 2 cm of approved quality laid in cement mortar 1 : 3 ( one cement and three sand ) 12 mm. thick mixed with water proofing compound confirming to ISS by 2% weight

Painting in two coats over inner wall surface with approved quality of Oil bound distember with colour over one coat of pirming coat including cost and conveyance of all materials to site etc

Pianting in two coats over outer wall surface with approved quality of Plastic Emulsion paint with colour over one coat of priming coat including cost of materials and labour charges etc.

Pianting in two coats over steel Doors & Windows with approved quality of enamel paint paint with colour over one coat of priming coat including cost of materials and labour charges etc.

Supply and fixing of PVC pipes and specials arrangements of all etc 110mm PVC pipe

Supply and fixing of PVC pipes and specials arrangements of all etc 110mm PVC elbow

Electricfication arrangements Wiring with 2x1.5sqmm(22/0.3) PVC insulated unsheathed SC. Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall,covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (For electronic regulator) (5 Points Per Coil)(S.D.No.22)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.(S.D.No.36)

Supply and fixing of 16 Amps DPIC switch of 500V grade with Fuse and Nutral on suitable T.W. board with painting of suitable colour with PWD Earthing (SD No.142)

Supply and run of 2 of 4 sq. mm ( 84/0.30) polythene insulated and PVC unsheeted S.C. Alu cable of 1100 V on 7/20 Gi bearer wire for Service Connection Main (S.D.No.64)

Supplying and fixing of Doom Light With Shade

Supply and fixing of Tube Light fitting complete with guard suitable for lamp with 40 W bulb with PVC unsheated leads from terminal to the fitting (S.D.No.84)

Supply and Fixing of AC Ceiling Fan including all cost etc..,

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Selvarani