GE/P-01/2025-26

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, wall cladding etc including removal to store complete all as directed by Engr-in-Charge.

Dismantling of structural steel work including doors, gates including framed truss n. exc 10 mtr span etc. including removal to store complete all as specified and as directed by Engr-in-Charge.

Demolition of Reinforced Cement Concrete (including reinforcement cut as required to facilitate demolition) of any description and in any position for Columns, any type of Beams, Roofs, floors, staircases, landing, chajjas and similar suspended works including removal to store complete all as directed by Engr-in-Charge.

Demolition of Unreinforced cement Concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) including removal of debris from the site complete all as specified and as directed by Engr-in-Charge.

Separating, scraping and cleaning of reinforcement (demolition of concrete measured seperately) complete all as specified.

Demolition of brick work or stone/boulder masonry built in cement or cement lime mortar including all quoins, arches, pillars etc but excluding ashlars facing dressed stonework and precast concrete articles including removal of demolished items from the site complete all as directed by Engr-in-Charge.

Excavation in trenches for n. exc 1.50 Mtr width but n.exc 1.50 Mtr depth for foundation not exc 10 sqm on plan and n. exc 1.50 mtr in depth incl getting in soft/loose soil complete all as specified and directed.

Returning , filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick with soils complete all as specified and directed.

Removal of excavated materials to a distance n. exc 50m and depositing where directed at a level n. exc 1.50m above the starting point complete all as specified and directed.

M&L for Anti Termite Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as directed.

M&L for Anti Termite Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as directed.

M&L for Anti Termite Treatment for top surfaces of floor filling/plinth protection @ 5.00 Ltr/Sqm of emulsion per Sqm of Floor surfaces complete all as specified and directed.

M&L for Anti Termite Treatment along the external perimeter of building by using emulsion @ 2.25 Ltr/Mtr complete all as specified and directed.

M&L for cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick cement mortar 1:4 complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required, including cracking bedning etc and bending with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 5 to 10mm dia as in stirrups cut to length bent to shape required, including cracking bedning etc and bending with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for flat rough finished surfaces of concrete all as specified and directed

Formwork to sides and soffits for flat rough finished surfaces of concrete of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, elves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Hoprizontal or slopping) complete all as specified and directed

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roffs n. exc 20cm wide and sides of RCC/PCC bands in walls horizontal or slopping and similar work exc 10cm but n. exc 20cm wide with fair finished surfaces all as specified and directed.

M&L for M25 design mix concrete (using 20mm graded aggregate) foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc asement slabs, under reamed piles and mass conrete complete all as specified and directed.

M&L for M25 design mix concrete (using 20mm graded aggregate) for columns, pillars, piers, posts and struts all as specified and directed.

M&L for M25 design mix concrete (using 20mm graded aggregate) for Roof Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

M&L for M25 design mix concrete (using 20mm graded aggregate) for slab supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed

M&L for M25 design mix concrete (using 20mm graded aggregate) for Chajjas all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate as in below plinth beam/flooring complete all as specified and directed.

M&L for 150mm thick Hardcore of gauge of broken stone or boulders n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) Type C2 using (40mm graded stone aggregate) as in plinth protection and paving with even and smooth finished, without using extra cement and making 10mm wide groove at every 1.50m and at juction & filled with Bitumen/mastic complete all as specified.

M&L for cement concrete type D2, 1:4:8 using 40mm graded stone aggregate as in sub- flooring/ sub base complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20 to 25mm tgucj as ub floor, treads etc laid ovver 20mm screed bed or bedding layer in cement mortar 1:3 set and jointed in neat cement slurry and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing by machine complete all as specified and directed by Engr-in-Charge.

M&L for 20-25mm thick Kota stone slab in riser of steps, skirting, dado and pillar laid over cement screed and jointed complete all as specified and as directed by Engr-incharge.

M&L for Granite/Green Marble 16-18 mm thick dressed true and square, in one length not less than 60cm and n. exc 120cm in copings, window cills, chajjas, sunshades, etc., punched dressed on mexposed faces and self faced ,on the embedded unexposed beds and joints; exposed edges rounded or ,chamfered as directed, set, jointed and pointed inCement mortar 1:4 complete all as specified and as directed.

M&L for rendering 15mm thick in two layers on brick masonry surfaces or on other than fair faces of brick masonry first layer 10mm thick in cement mortar 1:6 and second layer 5mm thick in CM 1:4 mixed with WPC 3% by wt of cement and finished even and fair without using extra cement complete all as specified and as directed. Note : Supply only WPC shall be measured and paid separately.

M&L for 15mm thick rendering by using manufacture sand on brick or concrete surfaces in internal surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered wall surfaces and apply two coat of plastic emulsion paint 100% acrylic of approved colour over a coat of primer and over 1 to 2mm thick birla putty punning complete all as specified and directed by Engr-in-charge including necessary scaffolding .

M&L for preparing new plastered wall surfaces and applying two coat of distemper Oil Emulsion over a coat of cement primer complete and over 2 mm thick wall care putty all as specified and as directed by Engr-in-Charge.

Supply only Liquid water proofing compound of approved quality complete all as specified and directed.

M&L for 5mm thick cement plaster in cement mortar 1:3 as on ceiling and plastering to be finished even & smooth without using extra cement complete all as specified.

M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying three coats of white wash complete all as specified.

S&F for rolled mild steel grade Fe-290 Gde E-165 quality -A as in framing for doors cladding, chowkhats/frame or like etc welding hold fast, hinges complete all as specified and as directed.

S&F for 35mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type having decorative laminations on both sides and bonded with phenol formaldehyde synthetic resin adhesive LEAD SHEET 2mm thick including hinges, door handle, tower bolt, sliding bolt and shall comply with requirement of IS-2202 (Part-I) and shall be ISI marked complete all as specified and as directed.

M&L for 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work ® as per IS 710 of approved brand boxes, shelves, racks screws etc complete as per direction of Engr-in-Charge.

S&F of steel window box type made of ERW hollow section of size (130mm x 1.25mm) thick double rebated comprises guaged and glazed skeleton shutter ERW Section 50mm x 20mm x 1mm thick double shutter with double leaf and arrangement for cooler opening including iron grill bar with 12mm square complete welded to frame with vertical mulion of size 130mm x 65mm with 1.25mm thick ERW box type including cutting holes for hold fast (04 No each window) and including following fittings welded to frame/shutter :- (a) Hold fast of 150mm long on flat iron 25mm x 3mm made to shape - 4 Nos each window. (b) MS handle cold rolled of size 100mm long - 01 No per leaf. (c) MS tower bolt 100mm long - 2 Nos per leaf. (d) Z-Section 20mm x 25mm long stopper - 01 No per leaf. (e) MS pintel hinges of size 40mm x 25mm - 02 Nos per leaf including one coat of red oxide shop primer complete all as specified and as directed. (Note : - The cost of stainless steel mosquito proof wire mesh and 4mm thick sheet glass shall be deemed to be included in unit rate).

M&L for 60mm thick machine pressed precast concrete interlocking paver block of M-35 with grey cement & pigment with a 25mm thick sand cusning over 100mm thick sub base 1:4:8 type D2 using 40mm graded aggregate including necessary form work complete all as specified and as directed.

M&L for coloured Non-skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match over 15mm thick screed bed in CM 1:6 over 25mm thick PCC sub base 1:2:4 type B0.

M&L for Glazed ceramic tiles in vertical surface 300 x 450mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in CM 1:4

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F for 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed.

S&F for 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as directed.

S&F for 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as directed.

S&F for 500 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) oisted and fixed in position all as specified in SSR Part -I complete all as directed.

S&F for 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as directed.

S&F for 15mm bore Stop/Angle valves fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.

S&F for 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed.

S&F for 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as direted.

S&F for 15mm bore fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed.

S&F for 20mm bore medium grade Galvanised steel tubes including all necessary fitting complete all as directed.

S&F for 15mm bore medium grade Galvanised steel tubes including all necessary fitting complete all as directed.

S&F for 600mm length PVC connections 15mm size with PTMT nuts complete all as directed.

S&F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P' or 'S' trap (excluding flushing cistern and flush pipe) complete all as directed.

S&F for 10 Ltr Cap PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and including 32mm PVC flush pipe complete all as directed.

S&F for Vitreous China wash basin, white, flat back, size 630 x 450mm excluding ditto but including brackets, waste coupling and waste pipe complete all as directed.

S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as directed.

S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F for 125mm size Brass chromium plated shower rose complete all as directed.

S&F for Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as directed.

M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipes 200mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested, complete all as specified and directed.

Supply, laying and testing of 150mm dia of non-pressure RCC Pipes NP3 class (with single socket jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand) laid in trenches etc, Complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in surface channel and drains,complete all as specified.

M&L for plain cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates including necessary form work and weathering, slightly rounded or chamfered angles and throating complete all as specified and directed .

S&F for 75mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 Ton/Sqm, in square, rectangular or circular shape complete all as specified & directed.

Extra for forming fair finished drain or channel exc 30cm inner firth in cement concrete using extra cement including forms moulds mitred/stopped ends etc.

M&L for factory made 2nd class hard wood glazed and skelton door shutter made out of stiles & rails of 35mm thick 2nd class hard wood, klin seasoned and chemically pressure treated & open reabted and prepared to receive glass/gauge etc (without sash bars), edges of framing plain, chamfered of rounded, fitted with and mitred beads for securing glass etc complete, the size of members of shutter shall be as per IS-1003 including iron monger consisting door hinges, door handle, tower bolts etc complete all as specified and directed.

S&F stainless steel wire sloth 0.56mm nominal dia of wire average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples to wooden frames with beading complete all as specified and directed.

S&F UPVC (SWR) Pipes of 75mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe including taking out old unserviceable PVC/CI pipe with fittings complete all as specified and directed.

S&F UPVC (SWR) pipes of 110 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 110 mm pipe including taking out old unserviceable PVC/CI pipe with fittings complete all as specified and directed.

S&F UPVC (SWR) pipes of 75 mm bore(Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length fixed to wall including taking out old unserviceable PVC/CI pipe with fittings complete all as specified and directed.

S&F UPVC (SWR) pipes of 110 mm bore(Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length fixed to wall including taking out old unserviceable PVC/CI pipe with fittings complete all as specified and directed.

S&F UPVC (SWR) floor trap, plain with CP grating including joining with solvent cement 75 mm dia.complete all as specified and directed

S&F UPVC (SWR) bend 75mm bore of any radius complete all as specified and directed.

S&F UPVC (SWR) bend 75mm bore of any radius with access door complete all as specified and directed.

S&F UPVC (SWR) bend 110 mm bore of any radius complete all as specified and directed.

S&F UPVC (SWR) bend 110mm bore of any radius with access door complete all as specified and directed

S&F UPVC (SWR) 110mm bore branch piece (Single T) equal or unequal with access dooor complete all as specified and directed

S&F UPVC (SWR) 110mm bore branch piece (Double T) equal or unequal of bore with access door complete all as specified and directed.

S&F UPVC (SWR) 75mm bore branch piece (Single T) equal or unequal with access door complete all as specified and directed

S&F UPVC (SWR) 75mm bore branch piece (Double T) equal or unequal with access door complete all as specified and directed.

S&F UPVC (SWR) vent cowl 110mm complete all as specified and directed.

S&F salt glazed stone ware gully trap square or round mouthed type 'P' of size 150x150mm with CI grating, setting & jointing with cement with grouting surrounding gully trap with PCC 1:3:6, type C-1 block 30x30x45cm together with necessary form work, excavation & earth work in soft loose soil, complete all as specified and directed.

M&L for preparation of newly wooden surfaces/old untreated of any description over 10cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer all as specified and directed.

M&L for preparation of new steel surface/old untreated of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F Stainless Steel drapery rod of 25 mm inner dia (in length as directed ) of approved colour with & including decorative finial at both ends and pair of stainless steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beams including PVC curtain rings of matching colour @10 cm c/c all as specified and directed.

M&L for Second class hard wood in scantlings framed and fixed all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with 30mm Width of flaps (when open) complete all as directed.

M&L for point wiring with single core, FRLS PVC insulated unsheathed 1100 volt grade cable with multi standard copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metalic rigid PVC concealed conduct, medium grade, ISI marked not lesss than 20mm dia , with modular sunkeen boxes in wall of required size (concealed conduit wiring) with all fittings including Tee, junciton boxes and drawing continuous earth wire PVC insulated unsheathed 1100 Volts grade cable, FRLS with standed copper conductor of size 1.5 Sqm mm (Nominal area) complete for one light point controlled by one single pole switch all as specifiied and directed by Engr- in- charge

All as per item No-101 above but forceiling fan/exhaust fan point controlled by one single pole switch.

All as per item No-100 above but for one bell point controlled by one bell push.

All as per item No-100 above but for one 5 pin socket out let, 6 Amps on the same board.

All as per item No-100 above but for one socket out let, 16 Amps on Independent board with the cable 2.5 Sqmm size including earth continuty wire of size 2.5 Sqmmm

S&F ceiling rose surface bakelite 3 terminals complete all as specified and as directed by Engir-in-Charge

S&F bell multi music type 230 volt complete all as specified and directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor BLDC complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ventailating fan of size 300mm sweep, 900 RPM 230 Volts single phase exhaust fan steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and complete all as specified and directed by Engineer-in-Charge .

M & L for sub main wiring with two single core FRLS insulated, stranded, unsheathed copper conductor cable of size 06 Sqmm and drawing through & including Non Metalic PVC rigid conduit concealed in wall including earth continuity conductor of size 06 Sqmm PVC insulated unsheathed multi stranded copper conductor cable with suitable size of PVC conduit as pr IS , Not less than 25 mm and connected to earth dolly complete all as specified and directed by Engineer-in-charge.

S&F Socket outlet 3 pin, 5A, flush type complete all as specified as and directed by Engineer-in-charge.

S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified as and directed by Engineer-in-charge.

S&F Bell push, flush type, 5 amp complete all as specified as and directed by Engineer-in-charge.

S& F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fitting complete all as specified as and directed by Engineer-in-charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified as and directed by Engineer-in-charge.

S&F sheet metal enclosures for MCBs, Triple pole and neutral, 08 ways 415 Volts , earthing bus bar, double door type complete all as specified and directed by Engineer-in-Charge.

Supply and fixing TPN MCB 32 Amps ,10KA , 415V 'C' curve complete all as specified as and directed by Engineer-in-charge.

S&F sheet metal enclosures for MCBs, single pole and neutral, 08 ways 240 Volts , earthing bus bar, double door type complete all as specified and directed by Engineer-in-Charge.

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 240 v 20 amp complete all as specified and directed by Engr - In -Charge

S&F Switch socket combination 5A/16A, 5 in 1 complete all as specified as and directed by Engineer-in-charge.

S&F MCB SPN 32 Amps. C Curve type 10 KA braking capacity 240 volts complete all as specified as and directed by Engineer-in-charge.

S&F MCB SP 6 Amps. C Curve type 10 KA braking capacity 240 volts complete all as specified as and directed by Engineer-in-charge.

S&F MCB SP 16 Amps. C Curve type 10 KA braking capacity 240 volts complete all as specified as and directed by Engineer-in-charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified as and directed by Engineer-in-charge.

Supply and fixing LED street light fitting 35 watt 230V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection including service wire of 6.0 sqmm AL conductor with connection complete all as specified and directed by Engr- In- Charge.

Excavation in trenches in soft/loose soil not exc 1.5 m wide and not exc 1.5 m deep for laying of cable etc and getting out complete all as specified and directed by Engr-in- charge.

Returning, filling in, including, spreading, levelling, watering and well remming in layers not exceeding 25cm thick complete all as specified and directed by Engr-in- charge.

Removal of surplus soil to a distance not exc 50 m away and depositing where directed at a level not exc 1.5 above the starting point complete all as specified and directed by Engr-in- charge.

Sand cushioning to cable with 80 mm layer before laying of cable and 150 mm after laying the cable in trenches/ ducts for cable including consolidation complete all as specified and directed by Engr-in- charge.

Supply and laying un-reinforced precast concrete cable cover, class LV, type 3, flat of size 450mm x 180mm x 40mm complete all as specified and directed by Engr-in- charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core complete all as specified and directed ( For Garden Light)

M & L for Earthing complete with galvanised steel plate electrode 600x600x6 mm burned directly and preferably vertically in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth strip of 32x6 mm by means of bolts,nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type Cl chamber and RCC 1:2:4 type Bi cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 50 mm dia GI light grade pipe for earth lead protection, 20 mm dia GI light grade pipe for watering, water funnel, testing point etc., complete all as specified and directed by Engr in charge and testing on completion.

Boring of holes under road ,Pavement ,hard standing trench less technolgy using ultra sound technique and necessary machine incl HDPE pipe of 150mm dia suitable for 0.4mpa working pressure

M & L GI pipe light grade 80mm dia for passing of U/G cable through road/hard standing/pole/wall/floor etc.

Excavation in trenches in soft/loose soil not exc 1.5 m wide and not exc 1.5 m deep for laying of cable etc and getting out complete all as specified and directed by Engr-in- charge.

Returning, filling in, including, spreading, levelling, watering and well remming in layers not exceeding 25cm thick complete all as specified and directed by Engr-in- charge.

Removal of surplus soil to a distance not exc 50 m away and depositing where directed at a level not exc 1.5 above the starting point complete all as specified and directed by Engr-in- charge.

Supply and lay pipe galvanised Iron (GI), " medium class" including fitting of size 25 mm dia complete all specified and directed.

Supply and lay pipe galvanised Iron (GI), " medium class" including fitting of size 20 mm dia complete all specified and directed.

Supply and fix 25 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with wheel, screwed both ends for iron pipe complete all as specified and directed

Supply and fix 20 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with wheel, screwed both ends for iron pipe complete all as specified and directed

Material and labour for cutting/taping the existing CI/ GI pipe line of 80/63/40 mm dia bore in position and reducing to required length for inserting of new tee branches including jointing with nut bolt etc complete all as specified and directed.

M&L construction of valve chamber of size 900x900x1200mm internal size suitable for valves with PCC 1:4:8 type D 2 for foundation and brick masonry wall in cement mortar 1:6 PCC 1:3:6 type C 1 for coping rendering in CM 1:4:15mm thick including Provn of mild steel sheet cover 3.0mm thick on 40x40xx6mm angle iron frame work with two coats of synthetic enamel black paint over a coat of red oxide primer and locking arrangement including necessary excavation earth work all as specified and directed

Net Contract Sum will be after deducting Sch of Credit of Rs. 40200.00

HANUMAN BUILDERS (BID ID -3451320)