REPAIR MAINT TO STEEL AND WOODEN FURNITURES AT CERTAIN UNIT UNDER GE JORHAT.

Amount

NOTES :(i)The bidders/contractors are advised to read tender document & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.

CHAIR DINING (FD-16 / FD-279) :- Supply & fixing of the following unserviceable Components of chair dining, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of well seasoned 2nd Class Hard Wood as shown in drawing, complete all as specified and directed:- Supply and fixing in replacement of old unserviceable front legs all as shown in drawing.

Supply and fixing in replacement of old unserviceable rear legs all as shown in drawing.

Supply and fixing in replacement of old unserviceable front/side/Back rails for seat frame duly hole all as shown in drawing.

Supply and fixing in replacement of old unserviceable back batten all as shown in drawing.

Supply and fixing in replacement of old unserviceable stiffener all as shown in drawing.

Supply and fixing in replacement of old unserviceable hard rubber ring all as shown in drawing.

M & L for recanning of chair dining seat, to be woven with cane plastic 2mm wide with a border of 4mm wide plastic cane all round in Godrej pattern complete all as specified and directed.. NOTE :- (i) Canning shall be done in "GODREJ PATTERN"

Material & labour for complete removal of existing painting / polish of Chair Dining and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer complete all as specified and as directed.

Chair Writing (FD-280/FD-250) : - Supply & fixing of the following unserviceable components of Chair Writing, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of well seasoned 2nd Class Hard Wood as shown in drawing, complete all as specified and directed:- Supply and fixing in replacement of old unserviceable front legs all as shown in drawing.

Supply and fixing in replacement of old unserviceable rear legs all as shown in drawing.

Supply and fixing in replacement of old unserviceable side rails for seat frame duly hole all as shown in drawing.

Supply and fixing in replacement of old unserviceable front and back rails duly hole all as shown in drawing.

Supply and fixing in replacement of old unserviceable arms all as shown in drawing.

Supply and fixing in replacement of old unserviceable stiffener all as shown in drawing.

Supply and fixing in replacement of old unserviceable back batten all as shown in drawing.

M & L for recanning of chair writing seat, to be woven with cane plastic 2mm wide with a border of 4mm wide plastic cane all round in Godrej pattern complete all as specified and directed.. NOTE :- (i) Canning shall be done in "GODREJ PATTERN"

Supply and fixing in replacement of old unserviceable hard rubber ring all as shown in drawing.

Material & labour for complete removal of existing painting/polish of Chair Writing and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed.

Chair Easy (FD-229) : - Supply & fixing of the following unserviceable Components of Chair Easy, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of well seasoned 2nd Class Hard Wood as shown in drawing, including providing hard rubber ring fixed with screws at the bottom of the leg including applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer over exposed new timber surfaces complete all as specified and directed:- Supply and fixing in replacement of old unserviceable front legs all as per drawing.

Supply and fixing in replacement of old unserviceable rear legs all as per drawing.

Supply and fixing in replacement of old unserviceable side rails for seat frame duly hole all as per drawing.

Supply and fixing in replacement of old unserviceable front and back rails for seat frame duly hole for canning all as per drawing.

Supply and fixing in replacement of old unserviceable back seat (upper & lower) rails all as per drawing.

Supply and fixing in replacement of old unserviceable stiffener all as per drawing.

Supply and fixing in replacement of old unserviceable back seat side rails all as per drawing.

Supply and fixing in replacement of old unserviceable arms all as per drawing.

M&L for recanning of chair Easy seat & back (To be measured separately), to be woven with cane plastic 2mm wide with a border of 4mm wide plastic cane all round in Godrej pattern complete all as specified and directed. NOTE :- (i) Canning shall be done in "GODREJ PATTERN"

Supply and fixing in replacement of old unserviceable hard rubber ring all as shown in drawing.

Material & labour for complete removal of existing painting/polish of Chair Easy and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer complete all as specified and as directed.

TABLE DRESSING LADIES WITH MIRROR (FD-251):- Supply & fixing of the following unserviceable Components of Table dressing ladies with mirror including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of well seasoned 2nd Class Hard Wood as shown in drawing complete all as specified and directed:- (i)Supply and fixing in replacement of old unserviceable Mirror, 5.5 mm thick duly 2nd class hard wood frame and 6 mm thick plywood BWR on back side all as per drawing.

Supply and fixing in replacement of old unserviceable Top, shall be of 18 mm thick Medium density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affix with synthetic glue and exposed edges provided with 4 mm thick with width equal to thickness of board of 2nd class hard wood all as per drawing or as directed.

Supply and fixing in replacement of old unserviceable Bottom, shall be of 18 mm thick Medium density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affix with synthetic glue and exposed edges provided with 4 mm thick with width equal to thickness of board of 2nd class hard wood all as per drawing or as directed.

Supply and fixing in replacement of old unserviceable Legs, shall be of 2nd class Hard wood free from crack, knot holes and shape all as per drg.

Supply and fixing in replacement of old unserviceable knobs, shall be of 25 mm dia round chromium plated all as per drawing.

Supply and fixing in replacement of old unserviceable Sliding glass, shall be 5.5 mm thick all as per drawing. Make Modiguard or saint gobain Hindustan pilkinten duly machined.

Supply and fixing in replacement of old unserviceable aluminium channel, all as per drg.

Supply and fixing in replacement of old unserviceable back side plywood all as per drg.

Supply and fixing in replacement of old unserviceable hard rubber ring all as shown in drawing.

Material & labour for complete removal of existing painting/polish of Table dressing ladies with mirror and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed.

SOFA SINGLE SEATER (SINGLE PIECE) (FD-281, FD-373) :- Supply & fixing of the following unserviceable Components of Sofa Single Seater, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of well seasoned 2nd Class Hard Wood as shown in drawing complete all as specified and directed.(i)Supply and fixing in replacement of old unserviceable Front/Rear legs all as per drawing.

Supply and fixing in replacement of old unserviceable Arms all as per drawing.

Supply and fixing in replacement of old unserviceable Front/Side Rail for Seat Frame all as per drawing.

Supply and fixing in replacement of old unserviceable Seat/Back Seat Bearers all as per Drawing.

Supply and fixing in replacement of old unserviceable bottom support all as per drawing.

Supply and fixing in replacement of old unserviceable Bottom, Side and Upper Rails all as per drawing.

Supply and fixing in replacement of old unserviceable back seat support all as per drawing.

Material & labour for complete removal of existing painting/polish of Sofa single seater and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer complete all as specified and as directed.

SOFA SET 3 SEATER (SINGLE PIECE) (FD-281, FD-373):- Supply & fixing of the following unserviceable Components of Sofa Set Three Seater, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of well seasoned 2nd Class Hard Wood as shown in drawing, complete all as specified and directed. (i)Supply and fixing in replacement of old unserviceable Front/Rear legs all as per drawing.

Supply and fixing in replacement of old unserviceable Arms all as per drawing.

Supply and fixing in replacement of old unserviceable Front Rail for Seat Frame all as per drawing.

Supply and fixing in replacement of old unserviceable Side Rails for Seat Frame all as per drawing.

Supply and fixing in replacement of old unserviceable Seat/Back Seat Bearers all as per drawing.

Supply and fixing in replacement of old unserviceable bottom support all as per drawing.

Supply and fixing in replacement of old unserviceable Side Rails for back frame all as per drawing.

Supply and fixing in replacement of old unserviceable Bottom and Upper Rails for back frame all as per drawing.

Supply and fixing in replacement of old unserviceable back seat support all as per drawing.

Material & labour for complete removal of existing painting/polish of Sofa three seater and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed.

Removing old unserviceable foam cushion of size 560 x 530 x 100mm and supply and fixing new 100mm thick synthetic cushion of existing size of 40 density cool foam for seat and back duly covered with tapestry cloth colour and texture shall be as approved by the GE and shall be used for cover of cushion as specified and shall be of removable type by providing plastic Zip over Tapestry cloth complete all as specified and directed. Make of Foam cushion: Sleep well/Kurlon or equivalent.

Removing unserviceable Tapestry cloth from foam cushion of size 560 x 530 x 100mm and covering the same foam cushion with new tapestry cloth of approved colour (followed by stiching with white linen) colour and texture shall be as approved by the GE and shall be used for cover of cushion as specified and shall be of removable type by providing plastic Zip over Tapestry cloth complete all as specified and as directed. Note: Tapestry cloth shall not be less than Rs 300/- per meter of standard width.

TABLE WOODEN 900X600X760MM WITHOUT DRAWER (FD-284):- Supply & fixing of the following unserviceable Components of Table Wooden 900x600x760mm without drawer, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of well seasoned 2nd Class Hard Wood as shown in drawing complete all as specified and directed. (i)Supply and fixing in replacement of old unserviceable table top, shall be of 18 mm thick Medium density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affix with synthetic glue and exposed edges provided with 4 mm thick with width equal to thickness of board of 2nd class hard wood all as per drawing or as directed.

Supply and fixing in replacement of old unserviceable legs made of well seasoned 2nd class Hard wood of best quality all as per drawing.

Supply and fixing in replacement of old unserviceable long rails made of well seasoned 2nd class Hard wood of best quality all as per drawing.

Supply and fixing in replacement of old unserviceable side rails made of well seasoned 2nd class Hard wood of best quality all as per drawing.

Supply and fixing in replacement of old unserviceable stiffener made of well seasoned 2nd class Hard wood of best quality all as per drawing.

Supply and fixing in replacement of old unserviceable hard rubber ring all as shown in drawing.

Material & labour for complete removal of existing painting / polish of Table 900x600x760mm without drawer and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed.

TABLE WOODEN 900X600X760MM WITH DRAWER (FD-283/FD-231): Supply & fixing of the following unserviceable Components of Table Wooden 900x600x760mm with drawer, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of well seasoned 2nd Class Hard Wood as shown in drawing complete all as specified and directed :-(i)Supply and fixing in replacement of old unserviceable table top, shall be of 18 mm thick Medium density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affix with synthetic glue and exposed edges provided with 4 mm thick with width equal to thickness of board of 2nd class hard wood all as per drawing or as directed.

Supply and fixing in replacement of old unserviceable drawer (Drawer made out of 12mm thick 2nd class hardwood planks and bottom of the drawer shall be of 6mm thick plywood BWR grade) all as per drawing.

Supply and fixing in replacement of old unserviceable legs made of well seasoned 2nd class Hard wood of best quality all as per drawing.

Supply and fixing in replacement of old unserviceable long rails made of well seasoned 2nd class Hard wood of best quality all as per drawing.

Supply and fixing in replacement of old unserviceable side rails made of well seasoned 2nd class Hard wood of best quality all as per drawing.

Supply and fixing in replacement of old unserviceable stiffener made of well seasoned 2nd class Hard wood of best quality all as per drawing.

Supply and fixing in replacement of old unserviceable hard rubber ring all as shown in drawing.

Material & labour for complete removal of existing painting/polish of Table 900x600x760mm with drawer and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed.

TABLE CENTRE (FD-274/FD-235/FD-375) Supply & fixing of the following unserviceable Components of Table Centre, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of well seasoned 2nd Class Hard Wood as shown in drawing complete all as specified and directed.:- (i) Supply and fixing in replacement of old unserviceable table centre top, shall be of 18 mm thick Medium density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affix with synthetic glue and exposed edges provided with 4 mm thick with width equal to thickness of board of 2nd class hard wood all as per drawing or as directed.

Supply and fixing in replacement of old unserviceable legs made of well seasoned 2nd class Hard wood of best quality all as per drawing.

Supply and fixing in replacement of old unserviceable long rails made of well seasoned 2nd class Hard wood of best quality all as per drawing.

Supply and fixing in replacement of old unserviceable stiffener made of well seasoned 2nd class Hard wood of best quality all as per drawing.

Supply and fixing in replacement of old unserviceable hard rubber ring all as shown in drawing.

Material & labour for complete removal of existing painting/polish of Table Centre and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed.

PEG TABLE (FD - 277):- Supply & fixing of the following unserviceable Components of Peg Table, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of well seasoned 2nd Class Hard Wood as shown in drawing complete all as specified and directed:- (i) Supply and fixing in replacement of old unserviceable Peg table top, shall be of 18 mm thick Medium density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affix with synthetic glue and exposed edges provided with 4 mm thick with width equal to thickness of board of 2nd class hard wood all as per drawing or as directed.

Supply and fixing in replacement of old unserviceable legs made of well seasoned 2nd class Hard wood of best quality all as per drawing.

Supply and fixing in replacement of old unserviceable long rails made of well seasoned 2nd class Hard wood of best quality all as per drawing.

Supply and fixing in replacement of old unserviceable stiffener made of well seasoned 2nd class Hard wood of best quality all as per drawing.

Supply and fixing in replacement of old unserviceable hard rubber ring all as shown in drawing.

Material & labour for complete removal of existing painting/polish of Peg Table and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed.

TEAPOY WOODEN (FD-278): Supply & fixing of the following unserviceable Components of Teapoy Wooden, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of well seasoned 2nd Class Hard Wood as shown in drawing complete all as specified and directed :- Supply and fixing in replacement of old unserviceable Teapoy top, shall be of 18 mm thick Medium density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affix with synthetic glue and exposed edges provided with 4 mm thick with width equal to thickness of board of 2nd class hard wood all as per drawing or as directed

Supply and fixing in replacement of old unserviceable legs made of well seasoned 2nd Class Hard Wood all as per drawing.

Supply and fixing in replacement of old unserviceable long rails made of well seasoned 2nd Class Hard Wood all as per drawing.

Supply and fixing in replacement of old unserviceable stiffener made of well seasoned 2nd Class Hard Wood all as per drawing.

Supply and fixing in replacement of old unserviceable hard rubber ring all as shown in drawing.

Material & labour for complete removal of existing painting/polish of Teapoy Wooden and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed.

TABLE WRITING (FD-275): Supply & fixing of the following unserviceable Components of Table Writing, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of well seasoned 2nd Class Hard Wood as shown in drawing complete all as specified and directed :- (i) Supply and fixing in replacement of old unserviceable table top, shall be of 18 mm thick Medium density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affix with synthetic glue and exposed edges provided with 4 mm thick with width equal to thickness of board of 2nd class hard wood all as per drawing or as directed.

Supply and fixing in replacement of old unserviceable legs made of well seasoned 2nd Class Hard Wood all as per drawing.

Supply and fixing in replacement of old unserviceable long rails made of well seasoned 2nd Class Hard Wood all as per drawing.

Supply and fixing in replacement of old unserviceable short rails made of well seasoned 2nd Class Hard Wood all as per drawing.

Supply and fixing in replacement of of old unserviceable drawer (Drawer made out of 12mm thick well seasoned 2nd Class Hard Wood planks and bottom of the drawer shall be of 6mm thick plywood BWR grade) all as per drawing .

Supply and fixing in replacement of old unserviceable sides (Left and Right) of Box, shall be of 18 mm thick Medium density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affix with synthetic glue and exposed edges provided with 4 mm thick with width equal to thickness of board of 2nd class hard wood all as per drawing or as directed.

Supply and fixing in replacement of old unserviceable bottom of Box, shall be of 18 mm thick Medium density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affix with synthetic glue and exposed edges provided with 4 mm thick with width equal to thickness of board of 2nd class hard wood all as per drawing or as directed.

Supply and fixing in replacement of old unserviceable Self of Box, shall be of 12 mm thick Medium density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affix with synthetic glue and exposed edges provided with 4 mm thick with width equal to thickness of board of 2nd class hard wood all as per drawing or as directed.

Supply and fixing in replacement of old unserviceable Handles all as per drg.

Supply and fixing in replacement of old unserviceable back side of box made of 6mm thick plywood commercial all as per drawing.

Supply and fixing in replacement of old unserviceable shutter, shall be of 18 mm thick Medium density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affix with synthetic glue and exposed edges provided with 4 mm thick with width equal to thickness of board of 2nd class hard wood and brass locking system Make: Godrej/Harison or equivalent and piano type butt hinges all as per drawing.

Supply and fixing in replacement of old unserviceable hard rubber ring all as shown in drawing.

Material & labour for complete removal of existing painting/polish of Table writing and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed.

TABLE DINING FOR SIX PERSONS (FD - 273): Supply & fixing of the following unserviceable Components of Table Dining Six Person, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of well seasoned 2nd Class Hard Wood as shown in drawing complete all as specified and directed:- (i) Supply and fixing in replacement of old unserviceable table top, shall be of 18 mm thick Medium density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affix with synthetic glue and exposed edges provided with 4 mm thick with width equal to thickness of board of 2nd class hard wood all as per drawing or as directed.

Supply and fixing in replacement of old unserviceable legs made of well seasoned 2nd Class Hard Wood of all as per drawing.

Supply and fixing in replacement of old unserviceable long rails made of well seasoned 2nd Class Hard Wood all as per drawing.

Supply and fixing in replacement of old unserviceable short rails made of well seasoned 2nd Class Hard Woodall as per drawing.

Supply and fixing in replacement of old unserviceable hard rubber ring all as shown in drawing.

Material & labour for complete removal of existing painting/polish of Table dining 6 pers and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed.

TABLE DINING FOR EIGHT PERSONS (FD - 273):- Supply & fixing of the following unserviceable Components of Table Dining Eight Person, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of well seasoned 2nd Class Hard Wood as shown in drawing complete all as specified and directed:- (i)Supply and fixing in replacement of old unserviceable table top, shall be of 18 mm thick Medium density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affix with synthetic glue and exposed edges provided with 4 mm thick with width equal to thickness of board of 2nd class hard wood all as per drawing or as directed.

Supply and fixing in replacement of old unserviceable legs made of well seasoned 2nd Class Hard Wood of all as per drawing.

Supply and fixing in replacement of old unserviceable long rails made of well seasoned 2nd Class Hard Wood all as per drawing.

Supply and fixing in replacement of old unserviceable short rails made of well seasoned 2nd Class Hard Woodall as per drawing.

Supply and fixing in replacement of old unserviceable hard rubber ring all as shown in drawing.

Material & labour for complete removal of existing painting/polish of Table dining 8 pers and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed.

BED PLYWOOD TOP (FD - 247 & 246) : Removing following unserviceable items of bed ply wood top without disturbing the other parts and supply and fixing with new items as specified made to shape & size well seasoned 2nd Class Hard Wood as shown in drawing new timber surfaces complete all as specified and directed:- (i)Supply and fixing in replacement of all broken worn out component of head board and provide frame with well seasoned 2nd class hard wood including 2nd class hardwood battens between frame and teak face veneer ply ISI marked with half round hard wood edging all as specified in drawing and as directed.

Supply and fixing in replacement of all broken worn out component of foot board and provide frame with well seasoned 2nd class hard wood including 2nd class hardwood battens between frame and teak face veneer ply ISI marked with half round hard wood edging all as specified in drawing and as directed.

Supply and fixing in replacement of old unserviceable long rails made of well seasoned 2nd Class Hard Wood all as per drawing.

Supply and fixing in replacement of old unserviceable stiffener made of well seasoned 2nd Class Hard Wood all as per drawing.

Supply and fixing in replacement of old unserviceable, worn out ply wood 12mm thick BWR plywood 7 ply ISI Marked confirming to IS-303 all as per drawing.

Supply and fixing in replacement of old unserviceable hard rubber ring all as shown in drawing.

Material & labour for complete removal of existing painting/polish of Table dining 8 persons and applying two coats of high gloss polyurethane enamel paint by spray painting method over and including a coat of pink primer Complete all as specified and as directed.

Charpoy GI Pipe 32mm with Plywood Top (FD-220) :- Removing following unserviceable items of Charpoy GI Pipe 32mm without disturbing the other parts and supply and fixing with new items as specified made to shape & size all as per drawing and as directed:- (a) Removing of old unserviceable Plywood 12mm thick from charpoy GI Pipe 32mm and tightening the frame and making it suitable for fixing New plywood Top and providing 12mm thick BWR plywood 7 ply ISI Marked confirming to IS-303 of size 1980x900mm with 4mm thick well seasoned 2nd class hard wood beading all around fixed with existing pattern including nutt, bolt, washers and necessary welding, drilling on Each rails/Stiffener of GI Charpoy all as per drawing and directed.

(b) Supply and fixing in replacement of 32mm dia medium grade long rail including cutting, threading for GI Charpoy (FD-220) all as specified and as directed by Engineer -in-charge. (Note: Long Rails shall be screwed fully in the angle elbow)

(c) Making of short rails for GI Charpoys 32mm dia made out of from broken long rails obtained from srl item No 127.00 above including cutting & threading rails and fixing in replacement all as specified and direced. (Note: Short Rails shall be screwed fully in the angle elbow)

(d) Making of Legs for GI Charpoys 32mm dia made out from broken short rails obtained from Srl item No 128 above including cutting, threading and fixing in replacement and providing Hard Rubber Shoes of appopriate size of superior quality at bottom and duly applying two coats of synthetic enamel black paint all as specified and directed by Engineer-in-Charge. (Note: Legs shall be screwed fully in the angle elbow)

(e) Supply and fixing in replacement of old unserviceable 32mm dia medium grade GI elbow three ways all as specified and directed.

BED HARD STEEL (FD/E6/MAP/08R) : Removing following unserviceable items of bed hard steel without disturbing the other parts and supply and fixing with new items as specified made to shape & size all as per drawing and as directed:- (a) Supply and fixing in replacement of old unserviceable board of Head board, shall be of 18/19 mm thick Medium density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affix with synthetic glue and exposed edges provided with 4 mm thick with width equal to thickness of board of 2nd class hard wood Screwed to MS Strip of head board all as per drawing or as directed.

(b) Supply and fixing in replacement of old unserviceable Board of Foot Board, shall be of 18 mm thick Medium density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affix with synthetic glue and exposed edges provided with 4 mm thick with width equal to thickness of board of 2nd class hard wood Screwed to MS Strip of foot board all as per drawing or as directed.

(c) Supply and fixing in replecement of 20mm x 45mm of 18 gauge MS Strip (Including necessary welding) all as per drawing and as directed.

(d) Fixing only long rails including necessary welding nut & Bolts to Head Board and Foot Board as directed.

(e) Supply and fixing in replacement of old unserviceable, worn out ply wood 12mm thick BWR plywood 7 ply ISI Marked confirming to IS-303 all as per drawing.

(f) Supply and fixing in replacement of old unserviceable Hard rubber Shoes of appropriate Size all as per drawing.

CHARPOY MS SQUARE PIPE WITH HARD TOP (FD/MAP-II/01) : Removing following unserviceable items of Charpoy IP with hard top without disturbing the other parts and supply and fixing with new items as specified made to shape & size all as per drawing and as directed. (a) Supply and fixing in replacement of old unserviceable stiffener (including welding) made of 25mm square MS Pipe (16 Gauge) all as per drawing and as directed by Engr-in-Charge.

(b) Supply and fixing in replacement of old unserviceable, worn out ply wood 12mm thick BWR plywood 7 ply ISI Marked confirming to IS-303 all as per drawing.

(c) Supply and fixing in replacement of old unserviceable Hard rubber Shoes of appropriate Size all as per drawing.

Almirah large Steel (FD-1031, FD-1033, FD/E6/MAP/18): Taking Out following unserviceable items of Almirah Large steel without disturbing the other parts and supply and fixing with new items as specified made to shape & size all as per drawing and as directed. (a)Taking out existing unserviceable three way locking device and providing new locking device including welding of rods, box etc complete all as directed.

(b) Taking down unserviceable handle and S&F with new handle Brass chromium plated (Godrej pattern) screw type of size 150mm with nut and washer including necessary welding to make good the surface. All as shown on drawing and as directed by Engineer-in-Charge.

(c) Taking out and removing the old damaged bottom leg (left/right from its position and S&F new bottom leg made out of 20 guage (1 mm) plain black steel sheet (PBI sheet) fixed by run welding incl. painting with two coat of OG synthetic enamel paint over a coat of red oxide primer complete.

(d) Taking out and removing unserviceable lock and replacing fixing new brass body six lever lock with duplicate key for Almirah large Steel all as per directed .

(e) Taking out old unserviceable/damaged door shutter (left/right) from its position of almirah large steel and S & F new door shutter as per existing shape and size made out of 1.00mm thick MS plain black steel sheet (PBI sheet) by providing new hinges and make it smooth functional including painting with two coat of olive green synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spraying complete all as specified and as directed and shown on drg.

(f) Taking down unserviceable shelves and S&F new shelves made out of 1.00mm thick MS plain black sheet including applying two coats of synthetic enamel paint (olive green) over and including one coat of red oxide zinc chrome primer by spray painting including necessary prepration of surfaces after complete all as specified & as directed and as shown on drawing

Almirah medium/Small Steel (FD-1032,):Taking Out following unserviceable items of Almirah medium/Small steel without disturbing the other parts and supply and fixing with new items as specified made to shape & size all as per drawing and as directed. (a)Taking out existing unserviceable three way locking device and providing new locking device including welding of rods, box etc complete all as directed.

(b) Taking down unserviceable handle and S&F with new handle Brass chromium plated (Godrej pattern) screw type of size 150mm with nut and washer including necessary welding to make good the surface. All as shown on drawing and as directed by Engineer-in-Charge.

(c) Taking out and removing the old damaged bottom leg (left/right from its position and S&F new bottom leg made out of 20 guage (1 mm) plain black steel sheet (PBI sheet) fixed by run welding incl. painting with two coat of OG synthetic enamel paint over a coat of red oxide primer complete.

(d) Taking out and removing unserviceable lock and replacing fixing new brass body six lever lock with duplicate key for Almirah medium/smallSteel all as per directed.

(e) Taking out old unserviceable/damaged door shutter (left/right) from its position of almirah medium steel and S & F new door shutter as per existing shape and size made out of 1.00mm thick MS plain black steel sheet (PBI sheet) by providing new hinges and make it smooth functional including painting with two coat of olive green synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spraying complete all as specified and as directed and shown on drg.

(f) Taking down unserviceable shelves and S&F new shelves made out of 1.00mm thick MS plain black sheet including applying two coats of synthetic enamel paint (olive green) over and including one coat of red oxide zinc chrome primer by spray painting including necessary prepration of surfaces after complete all as specified & as directed and as shown on drawing

Table dining ORs (FD-165(M):- Taking down carefully existing unserviceable top of table with stainless steel sheet and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species free from all defects and with exposed wood surface painted and 22 gauge stainless steel sheet on top all as per Drg with two coats of high gloss polyurethane enamel paint over a coat of pink primer complete all as specified & as directed and as shown on drawing.

Teapoy Verandah (FD-255): Taking out and removing following unserviceable items of Teapoy Verandah without disturbing the other parts and supply and fixing with new items as specified made to shape & size all as per drawing and as directed. (a) Taking down carefully existing unserviceable top of table and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade with exposed face covered with 1mm thick decorative laminates Type-I of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with widht equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over a coat of pink primer complete all as per drawing and as directed by GE/Engineer-in-Charge.

(b) M&L for taking out and removing old unserviceable MS Legs and supply and fixing 25mm MS conduit pipe 1.6mm thick as per and applying two coats of polyurethane enamel paint high glossy over a coat of primer by spray painting and pvc rubber shoes to be provided in the bottom of the legs.complete all as specified & as directed and as shown on drawing

(c) M&L for taking out and removing unserviceable PVC Shoe and Supply & Fixing New PVC shoe for legs at bottom in place of old torn out shoe 25 mm dia complete all as specified & as directed and as shown on drawing

Locker Bed side Steel(FD-1029) : Taking out and removing following unserviceable items of Locker Bed Side steel without disturbing the other parts and supply and fixing with new items as specified made to shape & size all as per drawing and as directed. (a) Taking out existing unserviceable socket of CP rod and S & F new socket for Hanging rod 20 mm dia. brass chromium plated complete as shown in Drg

(b) Taking out unserviceable hasp & staple and S & F new hasp & staple of 75 mm x 40 mm x 3 mm, all as specified and shown on drawing as directed.

(c) Taking down unserviceable handles and S&F new handles brass chromium plated of size 100mm complete all as specified & as directed and as shown on drawing

(d) Taking down unserviceable Door shutters steel and S&F new door shutter made out of 1.00mm thick Mild steel plain black sheet, including applying two coats of synthetic enamel paint (Olive green) over a coat of red oxide by spray painting including preparation of surface complete all as specified & as directed and as shown on drawing

(e) Taking down unserviceable shelves and S&F new shelves made out of 1.00mm thick MS plain black sheet including applying two coats of synthetic enamel paint (olive green) over one coat of primer by spray painting including necessary prepration of surfaces all as specified & as directed and as shown on drawing

(f) Taking down unserviceable steel legs and S&F new legs made out of mild steel plain black Iron sheet of 1mm thick duly welded and applying two coat of synthetic enamel paint (olive green ) over a coat of Red oxide by spray painting including surface preparation complete all as specified & as directed and as shown on drawing

(g) Taking down unserviceable hanging rod and S&F new brass chromium plated hanging rod 20mm dia 1.60 mm thickness complete all as specified & as directed and as shown on drawing

Chair Verandah (FD-256) (FD-359): - Taking out following unserviceable items of Chair Verandah without disturbing the other parts and supply and fixing with new items as specified made to shape & size all as per drawing and as directed:- (a) Taking out unserviceable legs of chair verandah and supply and fixing in replacement of leg frame of size 20mm dia 16 gauge of Mild steel conduit pipe with hard rubber shoes and welding in running hand all as per drg and as directed.

(b) Taking out existing unserviceable cane from Chair verandah steel and weaving the same with plastic cane 4 mm wide half round of approved quality duly applying Two coat of synthetic enamelled white paint of approved quality to the steel surfaces of chair before canning. NOTE :- (i) Canning shall be done in "GODREJ PATTERN"

(c) Taking out unserviceable Hard Rubber Shoes and supply and fix in replacement of Hard Rubber Shoes of appropriate size all as per drg and as directed.

Chair CB Steel with/without Arms {FD-75 (M)}: Taking out following unserviceable items of Chair CB Steel with/without Arms without disturbing the other parts and supply and fixing with new items as specified made to shape & size all as per drawing and as directed:- (a) Taking out and S&F of Flat iron support of 25/20 x 5mm and 50mm long fixed to frame of chair CB Steel with Arms /without Arms including applying two coats of synthetic enamel OG/Grey paint over a coat of red oxide primer all as directed.

(b) Taking out unserviceable seat and Supply and Fixing in replacement of seat made from 2nd class hardwood duly canned in 'Godrej' pattern with 1.6mm plastic canned duly finished chair CB Steel with or without Arms as per drg and all as directed.

(c) Taking out unserviceable Back and Supply and Fixing in replacement of back made from 2nd class hardwood duly canned in 'Godrej' pattern with 1.6mm plastic canned duly finished chair CB Steel with or without Arms as per drg all as directed.

(d) Taking out unserviceable handles and Supply and Fixing in replacement of handle made from 2nd class hardwood for chair CB Steel with Arms duly finished complete as per drawing all as directed .

(e) Taking out unserviceable and S&F PVC Cap (02 Nos in Each Chair) and Stud (04 Nos in Each Chair) to legs of Chair CB steel with/without Arms of best quality as per drawing complete.

Chair Revolving and Chair Revolving Executive High Back (TP) : Taking out following unserviceable items of Chair Revolving Executive High Back without disturbing the other parts and supply and fixing with new items as specified made to shape & size all as per drawing and as directed. (a)Taking out old unserviceable Seat of Chair Revolving Executive and supply & fixing New Seat of Chair Revolving Executive all as per drawing & as directed. Note: Seat Shall be fixed over 12mm thick Hot Pressed plywood commercial and shall be upholstered with superior quality tapestry and moulded polyurithane foam 75mm thick of 50 density with PVC Lipping all round, cloth of approved shade, texture and premium quality) .

(b) Taking out old unserviceable Back of Chair Revolving Executive and supply & fixing New Back of Chair Revolving Executive all as per drawing & as directed. Note: Back Shall be fixed over 12mm thick Hot Pressed Plywood Commercial and shall be uplolstrered with superior quality tapestry and moulded polyurithance foam 50mm of 50 density and shall be disigned with contour lumber support for Extra comfort with PVC Lippling all round, cloth of approved shade, texture and premium quality)

(c) Taking out old unserviceable Arms rest of Chair Revolving Executive and Supply & Fixing New Arms Rest of Chair Revolving Executive all as per Drawing and directed. Note: Arm Rest shall be polyurethene "D" Shape Black integral Skin polyurethane reinforced with MS insert. It shall be Scrach and weather resistant.

(d) Taking out old unserviceable Revolving Wheels of Chair Revolving Executive and Supply & Fixing New Revolving Wheel of Chair Revolving Executive premium quality all as exsiting specification and directed.

(e) Taking out old unserviceable Hydrolic System (Air Soft) and supply and fixing New Hydrolic System (Air Soft) premium quality all as per existing specification and Directed.

(f) Taking out old unserviceable padestal Assembly and supply and fixing new Steel Padestal Assembly all as per existing specification and as directed by Engr in charge.

Chair Writing Cushion (FD/E6/MAP/12): Taking out following unserviceable items of Chair Writing without disturbing the other parts and supply and fixing with new items as specified made to shape & size all as per drawing and as directed. (a) Taking out old unserviceable Seat of Chair Writing and supply & fixing New Seat of Chair Writing all as per drawing & as directed. Note: Seat Shall be fixed over 12mm thick Hot Pressed plywood commercial and shall be upholstered with superior quality tapestry and moulded polyurithane foam 75mm thick of 50 density with PVC Lipping all round, cloth of approved shade, texture and premium quality all as per Drawing and Directed.

(b) Taking out old unserviceable back of Chair Writing and supply & fixing New back of Chair Writing all as per drawing & as directed. Note: Back Shall be fixed over 12mm thick Hot Pressed plywood commercial and shall be upholstered with superior quality tapestry and moulded polyurithane foam 50mm thick of 50 density with PVC Lipping all round, cloth of approved shade, texture and premium quality all as per Drawing and Directed.

(c) Taking out old unserviceable Arms rest of Chair Writing and Supply & Fixing New Arms Rest of Chair Writing all as per Drawing and directed. Note: Arm Rest shall be polyurethene "D" Shape Black integral Skin polyurethane reinforced with MS insert. It shall be Scrach and weather resistant.

(d) Taking out old Rubber stopper and supply and fixing New Hard Rubber Stopper all as per Drawing and Directed.

(e) Supply and fixing in replecement of old unserviceable Flat Iron Support of seat (Including necessary welding) all as per drawing and as directed.

Material & labour for preparing old painted steel surfaces by removing dents and bends, clipping, welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying two coat of synthetic enamel paint 1st Quality OG/SMOKE GRAY OR AS APPROVED paint both inside and outside by spray painting all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of Steel furniture (a) Almirah Large with Shelf (Steel) (FD-1031, FD-1033, FD/E6/MAP/18)

(b) Almirah Med Steel (FD-1032)

(c) Book Case Open Large Steel of Size 1650x830x300mm (FD-69(M))

(d) Book Case Steel (FD-1028)

(e) Chair CB Steel without Arms (FD-75(M))

(f) Chair Steel Tubular CB with Arms (FD-75(M))

(g) Locker Bed Side Steel (FD-1029)

(h) Side Rack with Tray Steel (FD-97(M), FD-1023)

(j) Table Clerk Steel (FD-84 (M), FD-1004)

(k) Table Office Officer Steel (FD-84(M), FD-1003)

Material & labour for preparing old painted steel surfaces by removing dents and bends, clipping, welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying two coats of synthetic enamel paint 1st Quality BLACK OR AS APPROVED paint both inside and outside by spray painting all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of Steel furniture (a) Bed hard steel ( FD/E6/MAP/12)

(b) Chair writing ( cushion ) ( MAP ) ( FD/E6/MAP/12)

(c) Charpoy MS square Pipe with hard top ( FD/MAP-II/01) ( GE/J/F/02 of 2011 )

(d) Table dining ORs ( FD-165(M))

(e) Trestle Store Room Wooden ( DB-4101)

(f) Trestle Store Room Steel ( FD-1046 )

Material & labour for preparing old painted steel surfaces by removing dents and bends, clipping, welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying two coat of synthetic enamel paint 1st Quality WHITE OR AS APPROVED paint by spray painting all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of Steel furniture (a) Chair Verandah (FD-19/ FD-256/ FD-359)

(a) Chair Verandah (FD/MAP-II/06 and FD-259)

(b) Teapoy Veranadah (FD-35, FD-208)

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ₹ ___________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

M/S N M TRADERS

AJOY DUTTA CHOWDHURY AND CO