COMPREHENSIVE AND WELCOME MAINT TO OFFRS MD ACCN AT AOR OF AGE B/R-I UNDER GE (EAST) AGRA

Amount

For Ser No 02 to 238 (Please refer the Schedule 'A' Note before quoting)

M&L for glazed ceramic colour designer concept glazed ceramic tiles 200x300x7mm size as in walls set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc incl dismantling of skirting/ dado (terrezo/PCC/tiles of any description) incl cement mortar bedding but not backing) incl dismantling and removing the rubbish from the complex complete all as specified & directed.

M&L for glazed ceramic colour designer concept glazed ceramic tiles 350x250x7mm /450x300x7mmsize as in walls set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc incl dismantling of skirting/ dado (terrezo/PCC/tiles of any description) incl cement mortar bedding but not backing) incl dismantling and removing the rubbish from the complex complete all as specified & directed.

M&L for non-skid coloured ceramic tiles 400x400x7mm of size 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 15 mm thick backing coat in cement mortar in (1:6), including demolition of floor (terrezo/ PCC/Tiles of any description) incl cement mortar bedding but not backing) incl dismantling and removing the rubbish from the complex complete all as specified & directed.

M&L for non skid coloured ceramic tiles tiles 300x300x7mm of size 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 15 mm thick backing coat in cement mortar in (1:6), including demolition of floor (terrezo/ PCC/Tiles of any description) incl cement mortar bedding but not backing) incl dismantling and removing the rubbish from the complex complete all as specified & directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick backing coat in cement mortar in (1:6), including demolition of floor (terrezo/ PCC/Tiles of any description) incl cement mortar bedding but not backing) incl dismantling and removing the rubbish from the complex complete all as specified & directed.

S&F in repairs CP health faucet including necessary holding arrangements with screws etc complete all as specified & directed.

S&F in repair Stainless Steel Soap Dish Holder, complete all as specified & directed.

S&F Paper holder with Flap Recessed Type (Stainless steel), in repairs, complete all as specified & directed.

S&F Corner Glass shelf with bracket, set of three in repairs, complete all as specified & directed.

S&F in repair 15 mm dia bib taps (fancy type), Chromium plated cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified & directed.

S&F in repair bib tap of PTMT any colour 15mm dia complete all as specified & directed.

S&F in repair stop valve of PTMT any colour screwed for iron pipe and fixed 15mm bore complete all as specified & directed.

S&F in repair gun metal globe gate valve 20 mm bore complete all as specified & directed.

S&F in repair 20 mm dia ball valves PTMT , high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repair Towel Rack with lower hanger (stainless steel), fixed in repairs, complete all as specified & directed.

S&F brass chromium plated bottle trap 32mm bore for wash hand basin with inlet and outlet and screwed for pipe or all as specified, fixed as in repairs complete all as specified & directed.

M&L for replacement of existing chromium plated grating of size 125mm dia (with hole or without hole) complete for Nahani/Floor traps and fixed as in repairs complete all as specified & directed.

S&F in repair 70 mm dia fancy type shower roses brass chromium plated with CP arms for 15mm bore GI pipe with 750 mm long shower arm complete all as specified & directed.

S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified & directed.

M&L in replacement of brass face spindle of existing 15mm dia bore bib cock, stop cock, angle valve, C P Pillar cock, Wash basin mixture and valve mixture of any description fixed in repairs complete all as specified & directed.

Removal of air lock/blockage of water in G I Tubing 15,20,25mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified & directed.

S&F Wall mixer with telephonic Shower arrangement with connecting legs & Wall flanges, fixed in repairs complete all as specified & directed.

S&F in repair 15 mm dia Pillar taps (fancy type), cast copper alloy with capstan heads, chromium plated, handle screwed down high pressure, with or without lettered HOt or cold with long screwed shanks and fly nuts, screwed for crewed for iron pipe and fixed complete with check nut 15mm bore complete all as specified & directed.

S&F in repairs Angle cock with wall flange 15 mm dia Fancy type complete all as specified & directed.

Supply and fix in repairs stop valves, chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed 15mm bore dia complete all as specified & directed.

S&F in repairs PVC waste pipe 32/40 mm dia for urinal/ WHB/Sink complete all as specified & directed.

S&F as in repair 15mm dia PVC connection 600 mm long complete all as specified & directed.

S&F in repair Sink with drainage board made of stain less steel 1mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x 460x bowl size 410x330x160mm complete all as specified & directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm® complete all as specified & directed.

S& F in repairs PVC (SWR) P trap 110/110mm bore, complete all as specified & directed.

S&F in repairs PVC (SWR) S trap 110/110mm bore, complete all as specified & directed.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110 mm bore) including flat iron claim for proper fixing complete all as specified & directed.

S&F in repair PVC(SWR) bends 110mm dia complete all as specified & directed.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (75 mm bore) including flat iron claim for proper fixing complete all as specified & directed.

S&F in repair PVC(SWR) bends 75mm dia complete all as specified & directed.

S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats Minimum weight 300gms) complete all as specified & directed.

S&F in repair High density polyethylene pipes 50 mm bore of pressure ratings 6 kgf/cm2 fixed complete to walls, floors, ceiling etc complete all as specified & directed.

M&L for 110 mm dia of outlet PVC Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete complete all as specified & directed.

S&F in repair for vitreous china wash basin white flat back size 550x400 including cutting for and pinning in ends of brackets including of fixing of 32mm low density polylethyne pipes (LDPE)of pressure rating 6kg/cm2,coupling, PVC connection with 15 mm PTMT cheknuts, brackets all complete all as specified & directed.

S&F in repairs 10ltr capacity PVC valve less syphonic action type flushing cistern low level white with inlet ball valve ,float & handle including brackets complete all as specified & directed.

S&F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with threaded type closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threaded type lockable cover complete all as specified & directed.

S&F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threaded type cover complete all as specified and directed.

S&F in repair wash down water closet (pedestal pattern) of any colour including fixing of bolts complete all as specified and directed.

S&F in repairs plastic EWC seat cover of white colour for pedestal pan, closed pattern with flat bottom & cover including MS chromium plated alum hinging devices complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F CPVC pipes 20 mm SDR 11 & Plain VPVC SDR 11 on walls, ceiling orf laying including fitting in floors complete all as specified and directed.

S&F CPVC pipes 16 mm SDR 11 & Plain VPVC SDR 11 on walls, ceiling orf laying including fitting in floors complete all as specified and directed.

S&F in repairs for vitreous china Under Counter sunk Modular wash basin white flat back size 190X550X430mm including fixing of 32mm low density polylethyne pipes (LDPE)of pressure rating 6kg/cm2,coupling, complete all as specified and directed.

S&F in repair PVC syphon kit for low level flushing cistern complete all as specified and directed.

S&F PVC Cabinet mirror complete all as specified and directed.

S&F in repairs wash Basin mixer 15 mm dia Fancy type complete all as specified and directed.

S&F in repair 15mm dia, stop valve concealed type chromium plate fancy type with long shank and cup complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & complete 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg, complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 20 mm thick for laying floor tiles in cement mortar 1:6 finished even and rough complete all as specified and directed.

M&L Granite( of any size) work in cooking plate form and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 20 mm thickness complete all as specified and directed.

M & L for Vitrified tiles of light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for repair of of aluminium doors including taking out door shutters and changing of certain parts if required like pilots, hinges, rubber beadings etc as required and re-fixing in same position and size of doors n. exc 2 sqm each complete all as specified and directed.

All as per item No 62.00 above but for windows complete all as specified and directed.

S&F in repairs Single Piece EWC with cistern, soft close seat cover and twin flushing fittings of size wash down water closet (pedestal pattern) of any colour including fixing of bolts complete all as specified and directed.

S&F for Waste coupling for sink of 125mm dia complete all as specified and directed.

M&L for grinding and polishing of existing granite/Baroda Green stone, Kota stone or terrazo flooring up to required finishing complete all as specified and directed.

Supply and fixing in repair of brass elbow of size 16 outer mm dia complete all as specified and directed.

Supply and fixing in repair of brass elbow of size 20 outer mm dia complete all as specified and directed.

Supply and fixing in repair of brass elbow of size 25 outer mm dia complete all as specified and directed.

Supply and fixing in repair of brass tee of size 16 outer mm dia complete all as specified and directed.

Supply and fixing in repair of brass tee of size 20 outer mm dia complete all as specified and directed.

Supply and fixing in repair of brass tee of size 25 mm outer dia complete all as specified and directed.

Supply and fixing in repair of Male brass thread adaptor of size 16 mm outer dia complete all as specified and directed.

Supply and fixing in repair of Male brass thread adaptor of size 20 mm outer dia complete all as specified and directed.

Supply and fixing in repair Male brass thread adaptor of size 25 mm outer dia complete all as specified and directed.

Supply and fixing in repair of female brass thread adaptor of size 16 mm outer dia complete all as specified and directed.

Supply and fixing in repair of female brass thread adaptor of size 20 mm outer dia complete all as specified and directed.

Supply and fixing in repair female brass thread adaptor of size 25 mm outer dia complete all as specified and directed.

Supply and fixing in repair of tank adaptor of size 16 mm outer dia complete all as specified and directed.

Supply and fixing in repair of tank adaptor of size 20 mm outer dia complete all as specified and directed.

Supply and fixing in repair of tank adaptor of size 25 mm outer dia complete all as specified and directed.

Supply and fixing in repair of union of size 16 mm outer dia complete all as specified and directed.

Supply and fixing in repair of union of size 20 mm outer dia complete all as specified and directed.

Supply and fixing in repair of union of size 25 mm outer dia complete all as specified and directed.

S& F of Mild steel cover sheet water tank cover made out of 1 mm thick GI steel sheet with sharp spikes for prevention of its lid with monkey of design and pattern as approved by GE and suitable for 500 and 1000 Ltr tank as the case may be fixed with machine screw etc complete all as specified and directed.

M& L for baroda green marble (of any type) work (table rubbed and polished) 18 to 20 mm thick in steps, cills, jambs ,pillars, window cills, cooking platforms and like in cement mortar (1:4) of thickness 10 mm and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of marble complete all as specified and directed.

S& F of 15 mm dia nozzle pipe of wash basin mixer complete all as specified and directed.

S& F of 15 mm dia brass nozzle male thread complete all as specified and directed.

Cleaning and removing all scale and dirt etc from overhead water storage tanks of capacity exc 250 ltrs but not exc 500 liters including cleaning the mouths of circulating pipes complete all as specified including washing the tank with bleaching powder and writing the date of cleaning on outer wall of tank with synthetic enamel paint complete all as specified and directed.

Demolition of brick work of any type built in cement mortar complete all as specified and directed.

M& L for Brickwork with subclass "B" bricks bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1: 6 complete all as specified and directed.

M&L for 15mm thick smart care ready mix plaster in specially designed ready to use cement base plaster with high quality polymer additives and well graded sand and fillers which can be used for external plastering over bricks, block, stone walls as well as concrete surfaces finished even and smooth without using extra cement upto 11mtr height and providing necessary scaffolding, safety precautions and other requisite arrangements complete all as specified and directed.

M&L for 15mm thick smart care ready mix plaster in specially designed ready to use cement base plaster with high quality polymer additives and well graded sand and fillers which can be used for internal plastering over bricks, block, stone walls as well as concrete surfaces finished even and smooth without using extra cement upto 11mtr height and providing necessary scaffolding, safety precautions and other requisite arrangements complete all as specified and directed.

Rendering 5mm thick in CM (1:3) on ceiling on fair faces of brick work or concrete surfaces & finished even and smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint walls including one coat of alkali resistant primer complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered wall surfaces by scrapping and applying two coats of Exterior weather proof paint over and including a layer of wall care putty of thickness 2 mm complete all as specified and directed.

M&L for preparation of New plastered surfaces of walls and applying two coats of oil bound distemper on walls etc complete all as specified and directed.

Material and Labour for preparation of old plastered or un-plastered surfaces of wall and apply one coat of distemper oil emulsion white or any other colour complete all as specified and directed.

Material and Labour preparation of old painted wood & wood based surfaces of any description over 10 cm width or girth and apply one coat of synthetic enamel paint wood or tinted complete all as specified and directed.

Material and Labour preparation of old painted steel & steel based surfaces of any description over 10 cm width or girth and apply one coat of synthetic enamel paint on Steel surface complete all as specified and directed.

Material and Labour preparation of old polished wooden based surfaces of any description over 10 cm width or girth and apply of French polish including cleaning and preparing the surface including a coat of wood filler one coat on old work complete all as specified and directed.

Material and Labour for Complete removal of existing treatment of old distempered surfaces of wall including cornices, pilaster etc by washing, rubbing down, scrapping and stopping hole, etc and apply one coat of oil bound distemper over and incl 1 mm thick Wall care putty complete all as specified and directed.

Material and Labour for preparation of old plastered or unplastered surfaces of wall including cornices, pilaster etc by brooming down by steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc and apply one coat of white wash complete all as specified and directed.

Material and Labour for preparation of old plastered or unplastered surfaces of Ceiling including cornices, pilaster etc by brooming down by steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc and apply one coat of white wash complete all as specified and directed.

Demolition of cement Concrete as in ground floors and pavings not exc 15 cm thickness (above or below) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protection finisheed even and smooth without using extra cement including forming necessary joints 10 mm wide to the full depth of PCC at every 3 metre and filled with sealing compound grade A complete all as specified and directed.

Dismantling cast iron work/mild steel work of any description complete all as specified and directed.

M&L for framed work such as grills gratings etc with ends of bars shouldered and/or riveted or forged into spikes ,framed guard bars ,barred iron doors ,ladders ,framed blasters ,walk ways railings framework of water tanks and similar work confirming to Fe-290,Gde-E-165 complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer incl preparation of New steel surface complete all as specified and directed.

Dismantling wall and ceiling boards (fibre pulp, insulation etc.) or insulation board /slabs/blanket any thickness including cover fillets complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick wooden grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and complete all as specified and directed.

S&F Gl frame work size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre complete all as specified and directed.

M&L for 4 mm thick non asbestos fibre cement building designer boards fixed in ceiling or laid/inserted to timber/GI/aluminun frame complete all as specified and directed.

All as per item No 116.00 above except 4 mm thick non asbestos fibre cement building designer boards fixed in ceiling or laid/inserted to timber/GI/aluminun frame complete all as specified and directed.

M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed.

M&L for treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 to match the existing floors complete all as specified and directed.

M&L for treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.50 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n. exc 4 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1sqm but not exc 2 Sqm each and removing unserviceable materials from site of work complete all as specified and directed.

M&L for factory made Pressed steel frames 125 x 60 x 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike plate etc complete including PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregate) as in filling hollow portion of frame complete all as specified and directed.

M&L for factory made Pressed steel frames 105 x 60 x 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike plate etc complete including PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregate) as in filling hollow portion of frame complete all as specified and directed.

S&F Factory made flush shutter 35 mm thick solid core construction with block board core and plywood face panels commercial type complete all as specified and directed.

S & F 35 mm thick, factory made , llnd class hard wood (Sal) glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, charmfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part l, section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

Supply & fix galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated wood surfaces complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide on steel surface over 10 cm width or girth including preparation of new or previously untreated steel surfaces complete all as specified and directed.

S&F Aluminium alloy, anodised, 300 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 150 mm long aluminium anodized handle cast type complete all as specified and directed.

S&F 100 mm long stainless steel hinges type B-12 and fixed with screw/ welding complete all as specified and directed.

S&F Floor door stopper 150 mm long of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including guard bars complete all as specified and directed.

S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including guard bars complete all as specified and directed.

M&L for taking down wood shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing on same opening with same hardware etc complete all as specified and directed.

S&F in repair Aluminium alloy, anodised, 300 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F powder coated anodized aluminium door & frame for door, windows and ventilator with one or more rebates incl joining cleat for fixing etc of weighing 0.55 kg/m complete all as specified and directed.

S&F of power coated any colour anodised aluminium door shutter, aluminium section weighting 0.55 kg/m incl necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S & F powder coated Anodised aluminium window and ventilator shutters,side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and directed.

S & F powder coated anodised aluminium three track sliding window made of extruded profiles with reqd size of aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and plain glass on two shutters and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples on one shutters with two nylon roller on each shutters including star lock handle complete all as specified and directed.

S&F 5.5 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares exceeding 0.5 sqm in each pane complete all as specified and directed.

Description all as per item No 146.00 before but 5.00 mm thick figured glass, pin head type complete all as specified and directed.

S&F in repairs 3 mm thick sheet glass ordinary quantity and glazing with oil putty in square not exceeding 0.5 Sqm in each panel complete including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply & fix in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F in repair for 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

S & F in repair Door closer (extruded section) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Supply & fixing hasp and staple of size 75 mm long, safety type of aluminum anodized complete all as specified and directed.

Material & Labour for external 2nd class hardwood lipping 6 mm thick & 10 to 20 mm wide fixed with nails on block boards etc as in cupboard shelve kitchen cupboard etc complete all as specified and directed.

S&F in repair soft close cabinet hinges for kitchen cabinets/cupboards from 14 mm to 22 mm thickness complete all as specified and directed.

S&F in repair cupboard drawer channel set of 18 inches complete all as specified and directed.

S&F in repairs of drawer handle, projected drop of mild steel 50mm to 65mm long on screw plate complete all as specified and directed.

Supply & fixing in repair 40mm dia Cup Board knobs fixed with nut, screws Each and washers of mild steel, brass polished complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open) 40 mm complete all as specified and directed.

S&F Magnetic Catcher as in ‘Kitchen Cabinets’ Cupboards, Bath Cabinets etc complete all as specified and directed.

S&F of 19mm dia SS wardrobe hanger rod set for hanging cloths in wardrobe/ CB with supports at ends incl all fittings complete all as specified and directed.

S&F in repairs of 6 mm dia stainless steel of medium grade tie hanger set of 6 nos for wardrobe fixing in wardrobe incl fittings complete all as specified and directed.

M&L for door seal with stainless steel strip complete all as specified and directed.

S&F in repair of mild steel 300mm ordinary rat tail rod pattern springs incl roller and roller plate complete all as specified and directed.

S&F in repairs Stainless steel drapery rods, 25mm internal diameter including decorative type knobs, brackets including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed.

S&F 0.71 mm thick plain aluminium sheeting alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from which the pieces can be cut ) fitted in wall cladding, steel gates, etc., cut to size, holes punched including fixing to MS clamps with necessary bolts and nuts complete all as specified and directed.

S&F stainless steel self-closing hinge of 75 mm size for PVC door shutter complete all as specified and directed.

S&F 100 mm size MS mat / glossy finish handle complete all as specified and directed.

Dismantling of asbestos cement (corrugated and semi corrugated etc) sheet in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws complete all as specified and directed.

S& F in repair stainless steel kitchen plate rack wall mounted of overall minimum size1100 x 800 mm and 250 mm deep, with partition for small/large plates etc made out of stainless steel gauge,fixed with rawl plug and CP steel screws complete all as specified and directed.

S/F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L for cement concrete 1:5:10 type E2 (40 mm graded stone aggregate) as in foundation filling and mass concrete or sunken etc complete all as specified and directed.

M&L for 15mm thick plastering in CM 1:4 with WPC on concrete surfaces of finishing the surface even & smooth complete all incl water proofing compound complete all as specified and directed.

M& L for cement concrete padding 1:2:4 type B0 (12.50 mm graded stone aggregate ) 40 mm thick in sunken of bath /toilet /Kitchen etc with and including WPC as per manufacture's instruction complete all as specified and directed.

Material & labour for cleaning the surface of existing concrete of ceiling and applying rust removal and Zinc hydro pimer over exposed surface then applying Fibre reinforced polymer modifier repair mortar as per instructions made in the company of the Micro concrete thoroughly with forced action mixer with water (3.75 to 4 Liters per 25 Kg bag) with a homogeneous compact layer complete all as specified & directed with the following method of applications : - (a) Clean the surface and remove loose concrete, any dust, oil, paint, grease etc. (b) Expose fully any corroded steel in the repair area and remove all scale and corrosion deposits by applying rust removal chemical of Sika. (c) apply Zinc primer over clean re-bars and allow dry brfore continuing. (d) Then applied a fibre reinforced polymer modified repair mortar. (e) for a dry substrate, it should be primed by applying one coat of hydro prime. (f) mix micro concrete with water (3.75 to 4 Litres per 25 KG Bag) till homogeneous mix is obtained at 30 deg c. (g) Mixing Should be done thoroughly with a forced action mixer of adequate capacity at least for 5 Minutes. (h) pour or pumped the mixed micro concrete into a watertight shuttering in the repaired area when primer area becomes tacky. (i) curing the repaired surface for minimum 7 days.

Supply and applying in sunken portion two component elastomeric acrylic polymer modified cementitious waterproofing coating, smart damp block 2k suprema or approved equivalent, having 100% elongation as per ASTM D412.resisting 5 bars hydrostatic pressure as DIN 1048,reduction to rapid chloride shall be 70 as per have food grade certificate from laboratories like CFTRI coverage is 1.5 kg/sqm the mixing ratio of the coating shall be 2 parts of powder & I part of liquid without any water addition in the mixing etc complete as per manufactures specifications.

M&L for Providing & applying in any surface Alkaline Rust converting primer APCOREP RUSTREM in two coats conforming to ASTM-B-117 & ASTM-G-60-86 to exposed existing rebars after removing & cleaning loose rust by wire brush and leave it for 6-8 hours. The rust converter shall have a minimum pH of 7.5 and shall be able to convert both hematite and magnetite forms of rust shall pass 400 alternate immersion cycles in 3.5 % NaCl complete all as specified and directed.

M&L for Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect as following:- (a) SBR polymer (@ 10 % of cement weight) modified cementation coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer complete all as specified and directed.

M&L for Providing and Repairing the damaged concrete portion / Surface preparation with single component ready to use, repair mortar SMARTCAE REPAIR MORTAR capable of applying 20 mm avg. thick in single layer initially by hand and finishing with trowel, carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface complete all as specified and directed.

M&L for cement concrete 1:2:4 type B -0 using 12.5 mm graded stone aggregates as in benching, coping complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Anti Termite Treatment along the internal/external wall and wooden Cup board, shelves, etc. wooden area should drill by 6 mm bit, Gap between two holes is 30 cm to 45 cm internal/external wall skirting level should drill by 8/10/12 mm bit, gap between two holes is 45 cm to 60 cm. filling the holes by 100 ml to 150 ml dilution of chemical emulsion in two stages 3 stage close the holes by white cement and finsihes with existing surfaces. The ATT chemical should be odourless and mixed formulation should be injected at the rate of 5 ltr per sqm. The ATT chemical should contains. (i) Byfinthrin 20 % EC(Smell Chemical). (ii) CHLORPYRIPHOS 20 % EC (Smell Chemical). (iii) Imidacloprid 30.5 % SC (Odor less Chemical). The work pertaining to ATT shall be executed from authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. Note : Two years written guarantee shall be produced by the contractor from date of completion.

S & F in repair of hat pegs,(six peg set) solid body of aluminium of size 125 mm complete all as specified and directed.

M& L for repair of HDHMR (High Density High Moisture resistant) pre-laminated board of thickness 12 mm ,exterior grade, fixed to timber framework with screws as in cupboard shelves, kitchen, cupboards as in repair etc complete all as specified and directed.

Material & labour in repair for pre-laminated particle board 19mm thick, Exterior grade, pre-laminated one side with decorative choice laminations and other side balancing white laminations, fixed with nails/screws to timber frame work as in cupboard/shelves fixed in repair complete all as specified and directed.

M&L for 1 mm thick lamination sheet fixed to plywood, particle board, HDMR (High Density Moisture resistant) pre-laminated board, timber framework with adhesive as in cupboard shelves, kitchen, cupboards as in repair etc complete all as specified and directed.

M&L for cleaning of existing vegetation with roots, grass and debris over the roof/ wall surfaces and along the water pipe line/rainwater/ cost Iron pipe of a building and water tank staging including servant qtr having height not Exc 10 m and Removing the debris/waste materials out of MOD land including making the surface of roof terrace clean complete all as specified and directed. Note :- While removing the vegitation near the cost iron/ rainwater pipe/ water pipe line care to be taken to avoid, damage to the existing pipe and fixing arrangements, any damage occurs during removal of vegitation with roots the same to be rectified immediately on the same day, no extra payment to be paid to the contrator for rectification.

Supply only Fosroc High build fibre Reinforced Acrylic Elastomeric Waterproofing chemical (Brush bond Roofguard is high build fibre reinforced seamless waterproofing render suitable for waterproofing of old & new roofs, Brush bond Roofguard) Complete all as specified and directed.

Supply only Smart Care Damp Block 2K (Smart Care Damp Block 2K is a two component acrylic polymer-modified cementitious high performance coating. This product can be used for both positive & negative side waterproofing due to its excellent bonding, good waterproofing and unmatched resistance to hydrostatic pressure) complete all as specified and directed.

M&L for cleaning of spot blockage of floor trap, nahani trap, gully trap, WC (Indian or EWC),WHB, Sink outlet by removing the CP or PVC grating and CI oval access door etc of any type including cleaning of sludge & removing to outside of MD accn complete or cleaning and removing of spot blockage by any means in between trap and up to Ist manhole of any size and depth & removing of sluge to a distance 50 M and including cutting/clearing away grass vegetation, saplings, shrubs, brushwood, undergrowth, roots complete all-around of manholes complete all as specified and directed.

Welding in repairs n. exc 2.5 cm in length and n. exc 6mm thick complete all as specified and directed.

Taking down carefully existing unserviceable copper / aluminum point wiring of any description & in any position with and including taking out existing unserviceable conduits or battens of any description with sunken boxes/junction boxes and all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc but excluding tube light fittings and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts grade FRLSH PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit not less than 20 mm dia with all accessories and FRLSH PVC insulated 1.5 Sqmm multi standard sheathed copper wire for continues earth, including cutting and chasing of wall surface for laying PVC conduit and GI modular sunken box of suitable module as per site requirement not less than 1.6mm thick including modular frame plate with cover (inner & outer) and connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles complete all as specified and directed. Note:- Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following :- (a) One light /fan point controlled by one switch.

(b) One 5 pin socket outlet 5 Amps on same board complete all as specified and directed.

(c) One 5 pin socket outlet 5 Amps on independent board complete all as specified and directed.

(d) One bell/buzzer point controlled by one push button on the same board with other switches or independent complete all as specified and directed.

(e) One light point controlled by two 2 - way switches, with cables 1.5 sqmm size complete all as specified and directed.

All as per item No 195.00 here in before but with cable size 4 Sq mm for one 5 pin 15/16 Amps socket out let on independent board and multi strand insulated copper earth continuity conductor of size 4 sqmm complete all as specified and directed.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLSH PVC insulated unsheathed cable with proper colour coding drawn in including suitable size of PVC casing caping with all accessories and FRLSH PVC insulated 1.5 Sqmm multi standard sheathed copper wire for continues earth, including cutting and chasing of wall surface for laying PVC casing caping and MS modular sunken box with suitable module as per site requirement not less than 1.6mm thick including modular frame plate with cover (inner & outer)and connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. Note :PVC Casing capaing shall be fixed on surface of roof with necessary fittings at no extra cost for the following :- (a) One light /fan point controlled by one switch

(b) One 5 pin socket outlet 5 Amps on independent board complete all as specified and directed.

All as per item No 197.00 here in before but with cable size 4 Sqmm for one 5 pin 15/16 Amps socket out let on independent board and multi strand insulated copper earth continuity conductor of size 4sqmm complete all as specified and directed.

Supply and fixing modular switch piano single pole, one way 6 Amps 1 module, complete all as specified and directed.

Supply and fixing modular switch piano single pole, two way 6 Amps 1 module, complete all as specified and directed.

Supply and fixing modular switch piano flush type 16 Amps single pole one way, one module, complete all as specified and directed.

Supply and fixing modular socket outlet 2/3 pin 6 Amps combined 2 module, complete all as specified and directed.

Supply and fixing modular socket multipurpose 3 pin 6/16 Amps combined 2 module, complete all as specified and directed.

Supply and fixing modular step type, 1 module electronic fan regulator heavy duty 120watts 240 volts, complete all as specified and directed.

Supply and fixing Modular Bell push 6A 1 module pole, one way, complete all as specified and directed.

Supply and fixing call bell, Ding dong type, 230 volts AC single pole complete all as specified and directed.

Supplying & fixing for ceiling rose PVC Polycarbonate isolated body 62.5 x 25 mm, three terminals, complete all as specified & directed.

Supply and Fixing Modular Metal Flush Box 1/2 module complete all as specified and directed.

Supply and Fixing Modular Metal Flush Box 3 module complete all as specified and directed.

Supply and Fixing Modular Metal Flush Box 4 module complete all as specified and directed.

Supply and Fixing Modular Metal Flush Box 6 module complete all as specified and directed.

Supply and Fixing Modular Metal Flush Box 8 module complete all as specified and directed.

Supply and fixing modular cover plate with frame (inner and outer) 1 module for mounting switch and sockets complete all as specified and directed.

Supply and fixing modular cover plate with frame (inner and outer) 3 module for mounting switch and sockets complete all as specified and directed.

Supply and fixing modular cover plate with frame (inner and outer) 4 module for mounting switch and sockets complete all as specified and directed.

Supply and fixing modular cover plate with frame (inner and outer) 6 module for mounting switch and sockets complete all as specified and directed.

Supply and fixing modular cover plate with frame (inner and outer) 8 module for mounting switch and sockets complete all as specified and directed.

Supply and fixing blank spacer plate for single module complete all as specified and directed.

S&F in repair LED batten Tube Light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <20W luminaire lumen >2000 lm, system efficiency of >120 lumens /W, with Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification complete all as specified and directed.

S&F in repair Inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 3 hours, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <20W complete all as specified and directed.

S&F in repair LED batten Tube Light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <10W (2 feet 10 W) luminaire lumen >1000 lm, system efficiency of >100 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification complete all as specified and directed.

M&L for sub main wiring using two 2x6 sqmm single core PVC insulated, unsheathed stranded copper conductor cable of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) as required dia with standard accessories along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 1x 6 sqmm as earth continuity conductor connected to earth dolly complete all as specified and directed. (Note : Two run of single core PVC cable with one run of earth conductor and conduit /batten shall be measured as one unit.)

Supply and fixing in repair switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body complete all as specified and directed.

Supply and fixing in repair Switch piano flush button single pole one way 15 amps 230 Volts with polycarbonate body complete all as specified and directed.

Supply and fixing in repair socket 5 amps 3 pin flush type, 240 volts. with polycarbonate body complete all as specified and directed.

Supply and fixing in repair socket out let, 6 pin 5 and 15 amps multipurpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed.

S & F in repair stepped type electronic fan regulator socket/switch type ISI marked on the existing phenolic laminated sheet etc. as required, complete all as specified and directed.

S&F in repair of sunk in cast iron/Pressed steel terminal box of size 5"x 5", 60 mm deep & 1.6 mm thick duly painted with aluminum inside and anticorrosive paint outside/PVC polycarbonate PVC rectangular block 50 mm deep, including 3 mm thick plastic laminated sheet for mounting switches, sockets, fan regulators etc connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications, complete all as specified and directed.

S&F in repair of sunk in cast iron/Pressed steel terminal box of size 7"x 5", 60 mm deep & 1.6 mm thick duly painted with aluminum inside and anticorrosive paint outside/PVC polycarbonate PVC rectangular block 50 mm deep, including 3 mm thick plastic laminated sheet for mounting switches, sockets, fan regulators etc connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications, complete all as specified and directed.

S&F in repair of sunk in cast iron/Pressed steel terminal box of size 8"x 10", 60 mm deep & 1.6 mm thick duly painted with aluminum inside and anticorrosive paint outside/PVC polycarbonate PVC rectangular block 50 mm deep, including 3 mm thick plastic laminated sheet for mounting switches, sockets, fan regulators etc connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications, complete all as specified and directed.

Supply & fix in repair sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 12 way with IP-54 protection double door complete with appropriate size bus bar and neutral link complete all as specified and directed.

Supply & fix in repair sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 4 way with IP-54 protection double door complete with appropriate size bus bar and neutral link complete all as specified and directed.

Supply and fixing in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp, complete all as specified and directed.

Supply and fixing in repair MCB TPN 63 to 100 Amps, 415V 10KA 'C' curve and current carrying capacity in the DB complete with connection testing and commissioning, complete all as specified and directed.

Supply and fixing in repair MCB SP 6 to 32 Amp ('C' curve) having short circuit rating 10KA, 240 volts complete with connection testing and commissioning, complete all as specified and directed.

Supply and fixing in repair MCB SPN 40 to 63 Amp ('C' curve) having short circuit rating 10KA, 240 volts complete with connection testing and commissioning, complete all as specified and directed.

Taking down, dismantling / unscrewing electric water heater (Geyser) for repair/ servicing and refixing after repair reconnecting of electrical and water supply and testing with water pressure complete as specified and directed. Note : If required to deposit unserviceable water heater to AGE (E/M) yard ad collection of serviceable against replacement from AGE (E/M) yard is responsibility of contractor).

Supply, fixing and connecting in repair for Electric circuits for size of 1.0 sqmm copper FRLS wire for inverter in existing conduit/casing caping complete all as specified and directed.

Notes:- 1. The unit rates quoted for above items are also includes to provide the following workers to execute the above works as well as to attend the complaint assigned by concerned JE. Contractor is also bound to deploy more man power if required to any of the item to execute the above work and no extra payment shall be made. 2. Tradesman & helper required daily (except holiday & Sunday) to attend the complain without any extra cost as under:- (i) One Plumber along with One helper for all plumbing items in Sch ‘A’ Sec-I (ii) One Carpenter along with One helper for all carpentry related items of Sch ‘A’ Sec-I (iii) One mason along with helper for all cement related item of Sch ‘A’ Sec-I. 3. The labour as indicated in Note No 2 above shall be reported to the complaint cell at 8:30AM and shall be left at 5:30PM after handing over the receipt obtained from the users regarding attending the complaints. 4. The complaint shall be attended on the same day failing which a recovery as per Sch 'A' Note 1(d) on page NO 14 per day per complaint shall be made from the contractor's dues. 5. In case of absent of the any worker from the duty a recovery of Rs 500/- for tradesman and Rs 400/- for helper shall be made from the contractor's dues. 6. Attendance register shall be maintained by the contractor and same shall be signed by JE concerned everyday and by Engr-in-charge at his/her surprises check.

CREATIVE CONSTRUCTION (BID ID -3368542)

M/s Laxmi Associate (BID ID -3368278)

sumesh furniture (BID ID -3369772)

M/S OMKAR SINGH YADAV (BID ID -3369332)

C P Singh and Co (BID ID -3374557)

M/s SCHOLASTIC ENTERPRISES (BID ID -3369737)

M/s Kok Singh Sisodia (BID ID -3374219)