CA NO CWE BTD 52 2020 21

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each and removing from site including cutting holes for removal of hold fast complete.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each and removing from site including cutting holes for removal of hold fast complete.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each and re-fixing in the same opening including easing and adjusting including renewal of unserviceable screws etc complete.

Taking down shutters of any description not exceeding 1 Sqm each and re-fixing in the same opening including easing and adjusting including renewal of unserviceable screws etc complete.

S & F factory made pressed steel frames for door with one or more rebates including necessary fixing lugs, lock strike plate, hinges etc, complete, all as specified of frame size 125 mm x 60mm & thickness of MS sheet shall not be less than 1.25 mm including making holes for fixing hold fast etc and making good the wall with plaster in cement mortar (1:6) complete.

S & F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick veneered particle board with commercial veneering on both faces conforming to IS-3097 exterior grade kiln seasoned and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003 (Part I).

S & F factory made glazed and skeleton shutters 35mm thick using second class hard wood open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24(a); all as specified complete.

S&F in repairs FRP door frame of size 100mm x 60 mm with inner core of treated and seasoned rubber wood and outer core of average 2mm thick FRP with gel coat finish and with average weight of 4 Kg per RM all as directed.

S&F FRP door shutter 30mm thick are to be made with 3mm FRP unsaturated polyester resin moulded to 3mm FRP laminate for forming hollow rails and styles suitably rebated and seasoned rubber wood are to be filled inside at required places for fixing of fitting cast monolithically with 5mm thick FRP laminate for panels with gel coat finish and with average weight of 8 Kg per Sqm all as per IS-14856-2000.

S&F butt hinges, extruded aluminium alloy with with galvanised mild steel hinge pin, anodised and fixed, type B-21, size of hinge100mm.

M & L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate in filling in chowkats/ door frame or bed block of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including one shop coat painting all as directed.

S & F factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including one shop coat painting as directed.

S & F factory made fixed type steel ventilator with top hung with glazing bar complete as directed.

S & F MS framed work such as grills, gratings, etc., with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; sink bracket, cooler stand and similar work conforming to Fe 290 Gde E-165.

S & F sheet glass, 4 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed with oil putty or wooden beads including Provn of glazing pins/spring clips wherever necessary.

S & F figured pin headed glass, 4 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed with oil putty or wooden beads including Provn of glazing pins/spring clips wherever necessary.

S & F 300 mm long MS ordinary rat tail rod pattern springs for doors including roller and roller plate complete.

S & F in repairs 300 mm long MS ordinary rat tail rod pattern springs for doors including roller and roller plate complete.

S & F 200 mm long aluminium anodised, barrel tower bolts of extruded section.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type), and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, length of bolt 250mm.

S & F 125 mm extruded aluminium alloy handles, fabricated type, anodised.

S & F butt hinges, medium weight, cold rolled mild steel and fixed, size of hinges 125mm.

M & L for rendering 15 mm thick in cement mortar (1:6) on internal wall surfaces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement including taking down old cement plaster including raking out joints hacking for key scrubbing down with water etc and removing rubbish to a distance exceeding 1 km but not exceeding 2 km etc complete all as specified.

M & L for rendering 15 mm thick in cement mortar (1:4) on external wall surfaces of brick work or concrete surfaces even and fair without using extra cement mixed with liquid water proofing material as per manufacturer's instruction including taking down old cement plaster including raking out joints hacking for key scrubbing down with water etc and removing rubbish to a distance exceeding 1 km but not exceeding 2 km etc complete all as specified. (NOTE – WP material shall be measured and paid for separately.)

M & L for rendering 5 mm thick in cement mortar in (1:3) finishing the surfaces even and smooth on ceiling including taking down old cement plaster and removing rubbish to a distance exceeding 1 km but not exceeding 2 km etc complete all as specified.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint.

M & L for painting to new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint including preparation of surfaces.

M & L for painting to old or previously treated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint including preparation of surfaces.

M & L for painting to old or previously treated wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces.

M & L for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces.

M & L for 3 mm thick wall care putty on wall.

M & L for preparing previously treated surfaces of ceiling and applying one coat of white wash all as specified.

M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash all as specified.

M & L for two coats of cement based paint (camouflage pattern) over a coat of primer on newly plastered wall surface including preparation of surface.

M & L for preparing newly plastered surfaces of walls and applying three coats of white wash all as specified.

M & L for preparing previously treated surfaces of walls and applying two coats of white wash all as specified.

M & L for two coats of cement based paint (camouflage pattern) over previously treated surfaces of walls including preparation of surface.

M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping , steps , bed block, complete.

M&L for 75 mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for.

S & F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm, white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor and excluding flushing cistern, flush pipe and waste pipe complete.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC flushing pipe 32mm dia complete.

S & F in repairs, PVC connections 15 mm bore, 450 mm length, heavy duty, with PTMT nuts.

S & F in repairs stop valves, chromium plated, quarter turn, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe.

S & F in repairs stop valves, cast copper alloy, quarter turn, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe.

S & F in repairs, 15 mm bore chromium plated, quarter turn, bib taps cast copper alloy with crutch or butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

M & L for 15 mm bore GI pipe, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down 15 mm bore existing steel tubing and connections complete.

Taking up or down 15 mm bore existing steel tubing and connections complete and re-fixing the same in new or old position to walls and ceilings or laid in floors including cleaning of pipe and provision of new fitting as required complete all as directed.

M & L for 20 mm bore GI pipe, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down 20 mm bore existing steel tubing and connections complete.

Taking up or down 20 mm bore existing steel tubing and connections complete and re-fixing the same in new or old position to walls and ceilings or laid in floors including cleaning of pipe and provision of new fitting as required complete all as directed.

M & L for 25 mm bore GI pipe, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down 20 mm bore existing steel tubing and connections complete.

Taking up or down 25 mm bore existing steel tubing and connections complete and re-fixing the same in new or old position to walls and ceilings or laid in floors including cleaning of pipe and provision of new fitting as required complete all as directed.

S & F PVC (SWR) 110mm bore pipes, single socketed, in any length with rubber ring joints, fixed to walls with and including MS clamps including taking down existing eaves gutters and rain water pipes (any size or pattern ), including all fittings, heads, shoes, bends, swan necks, etc. (measured overall as fixed along the center line over fittings and accessories)

S & F 110 mm bore PVC (SWR) bends of any radius / shoe, fixed to PVC pipes as directed.

S & F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints fix to steel pipe or union complete all as specified and as directed.

S & F 500 litres capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old water tank of any size and any type and removing rubbish to a distance exceeding 1 km but not exceeding 2 km etc all as directed.

S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 210 gram).

Demolition of PCC in ground floors and pavings not exc 15cm thickness (below or above ground level).

M & L for non skid coloured ceramic tiles of size minimum 600mm x 600mm, 7 to 8 mm thick (square/rectangular), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile with including 15 mm thick Screed bed or bedding layer in CM (1:6) complete all as specified. Note: Only course sand shall be used in screed bed.

M & L for non skid coloured ceramic tiles of size minimum 400mm x 400mm, 7 to 8 mm thick (square/rectangular), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile with including 15 mm thick Screed bed or bedding layer in CM (1:6) complete all as specified. Note: Only course sand shall be used in screed bed.

M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in sub base, floor, path, pavings etc.

M & L for Rubber Moulded precast interlocking paver block factory made, any colour, shape and size as approved by GE, conforming to IS 15658-2006 of 60 mm thickness, made out of M-35 grade with and including minimum 25 mm thick sand cushioning below interlocking paving block complete laid dry of any description of thicknes in floors, aprons etc complete all as specified and directed.

Continuous brick edging; using old size burnt clay sub class 'B' bricks with width equal to the width of the brick, laid dry on end vertically.

S & F glazed ceramic coloured tiles 450 x 350mm, 7 to 8mm thick in verticle surfaces such as dado / skirting, set and jointed in neat cement slurry and pointed in white or coloured cement pigmented to the match the shade of tiles laid over and including 10 mm thick rendering in cement mortar (1:4) as backing coat and finish the surface rough to receive the tile including dismantling existing hearth or wall tiling including cement mortar bedding (but not backing) etc on brick or stone walls etc including racking out joints hacking for key and scrubbing removing rubbish to a distance exceeding 1 km but not exceeding 2 km etc complete all as specified.

M & L for machine cut kota stone slab flooring minimum size 450 mm x 450 mm, 18 to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing laid over and including 20 mm thick Screed bed or bedding layer in CM (1:6) including dismantling of stone slabs and tiles of any description or thickness in floors aprons etc, laid, bedded and pointed in any mortar complete.

All as per item No 69 above but in vertical surfaces such as steps , riser , skirting , dado and pillars as directed at site including 10 mm thick rendering as backing coat in cement mortar (1:4) including Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc, laid, bedded and pointed in any mortar.all as directed.

Welding in repairs n.exc 2.5 cm in length for thickness of metal to welded n.exc 6mm.

Dismantling bricks laid dry flat or on edge and pointed in any mortar.

S&F in repairs drapery rod (conduit) of dia not less than 25mm duly powder coated of shade as decided by Engr-in-Charge including ABS plastic finials of approved shade and including standard MS poder powder coated brackets fixed to walls with rawl plugs and steel screws complete.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges.

S & F in repairs chromium plated grating 125 mm size.

S & F in repairs vitreous china wash hand basin, white, of size 300mm x 450mm , excluding waste, chain and plug and porcelain stopper but including 32 mm dia waste coupling fancy type chromium plated, and PVC waste pipe of 32 mm dia and fixed all as directed complete, .

Supply only 15mm bore chromium plated, fancy type, quarter turn Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified.

Cutting holes in exceeding half brick but not exceeding one brick walls built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1 as required at site.

Providing and fixing of Gypsum board, pin head 600x600x12mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.30mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 2mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction and finishing the surface by applying two coat of plastic emulsion paint including M&L for dismantling existing boarding of any description fixed in any position with nails including fillets.

S & F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc shall be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as directed conforming to Fe 290 Gde E-165 including M&L for dismantling of existing structural steel work including doors, gates but excluding truss for repairs/replacement.

Demolition of brick tiles or terracing tiles, single layer on roofs including removing the demolished material exceeding 1 km and not exceeding 2 km away from site and disposal off in low lying area as directed.

Demolition of mud in roof, any thickness including plastering and leaping (where full thickness recovered or only a part there of) including removing the demolished material not exceeding 200 m away from site and disposal off in low lying area complete.

M&L for wire brushing and cleaning top surfaces of roof slabs etc, including washing the roof surface with water and making the surface free from mud etc complete all as specified.

M&L for 15 mm thick screed bed or bedding layer in cement mortar (1:3) on roof surfaces parapet or vertical beam surface (horizental or vertical) finishing the surfaces even and fair complete all as specified. (Note :- Course sand (Toka sand) shall only be used in screed bed/plastering.)

M&L for water proofing treatment over RCC slab by applying oil bound bituminous primer @ 0.30 kg/Sqm and providing and laying 3 mm thick APP modified water proofing memberane weighing not less than 3.50 kg/sqm, reinforced with non woven polyester reinforcement matt weighing not less than 160 gm/Sqm polyester core, having soften point not less than 150°C, longitudinal tensile strength not less than 650 N/ 5 cm, tearing strength of 180 N, torch application, side overlap 75 mm and end overlap 100 mm and tucked into the chases including ponding test all as specified and directed.

M&L for Lime concrete in lime mortar ratio (1:3) using 40 mm graded brick aggregate, laid to slope as directed by Engineer in charge over RCC roofs as padding complete alll as specified. Note: Minimum thickness of lime concrete at lower end shall not be less than 50mm.

M&L for 40 mm thick brick tiles laid on mud mortar or CM (1:6), 20 mm thick and joints grouted flush in CM (1:3) mixed with @ 5% of crude oil by weight of cement or mud phuska complete all as specified.

All as per item No. 87 above but except brick tiles complete all as specified. Note :- Old serviceable brick tile to be reused after cleaning and washing.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3).

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) including demolition of brick work built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and pre cast concrete articles.

S&F in repairs brass CP wall mixer for mixing hot and cold water screwed for iron pipe of 15 mm bore all as per Cera Cat part No. F2004405 or equivalent model of approved make from list of make attached in tender documents.

S&F in repairs, chromium plated soap tray of size 100 x 100 x 60mm and fixed on wall with chromium plated brass screws complete.

Complete removal of existing treatment on wall (any number of layears) by scrapping with steel wire brushes or any other means, including filling depressions of scrapped surfaces and M & L for preparation of old plastered surfaces of internal walls and applying the following:- (i) Applying wall care putty in two coats on wall surfaces & smoothening the surface with sand papers/ mechanized sanding etc (preparatory to paint as directed) complete all as specified. (ii) Two coats of 100% acrylic emulsion distemper by using airless spray/ roller over and including a coat of acylic internal primer. Note :- Contractor may use manual tools for surface preparation with prior approval of Engg- in- charge in writing in case use of mechanical equipments are not possible.

Supply only liquid water proofing material, ISI marked.

Internal Electrification

Taking down carefully existing unserviceable copper / aluminum point wiring (light, fan, socket) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, light fittings etc except concealed conduit and sunken boxes and removing the retrieved materials from site including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and directed.

M & L for point wiring with multi stranded copper conductor FRLSH cable, 1100 volts grade PVC insulated and unsheathed of size 1.5 Sqmm single core in and including PVC concealed conduit 20 mm dia, medium duty, ISI marked, and including new MS sunken box, 3 mm thick bakelite laminated sheet top cover for one fan / light / exhaust fan controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly including cutting chasing the surface and making good complete all as specified and directed.

All as per item No 96 here in before but for socket outlet 5 pin, 6 Amp on same board complete all as specified.

All as per item No 96 here in before but for socket outlet 5 pin, 6 Amp on independent board but not below the switch board complete all as specified .

All as per item No 96 here in before but for one socket outlet 6 pin, 6/16 Amp multipurpose 2 in 1 on independent board with cable of 2.5 Sq mm, multi stranded copper conductor FRLSH cable including provision of 2.5 Sq mm PVC insulated solid copper conductor FRLSH cable continues as earth wire connected to earth dolly, conductor etc.

S & F Switch, flush type, single pole, one way, 5/6 Amp .

S & F Switch, flush type, single pole, one way, 15/ 16 Amp .

S & F socket, multipurpose, 2 in 1, 5 Pin, 6 Amp, flush type. (Note: Switch and socket shall be of same make.)

S & F socket outlet universal, multipurpose, 2 in 1, 3 Pin 6 Amp and 6 pin 16 Amp, flush type. (Note: Switch and socket shall be of same make.)

S&F, fan regulator electronic step type (1-5), socket type 230-240 Volt, AC supply, complete all as specified and directed.

S & F ceiling rose, 3 plate, surface bakelite type, Polycorbonate body, 6 Amps, 250 Volts AC, 65 x 50 mm, three terminal (ISI marked) complete all as specified.

S & F Lamp holder of PVC/Polycarbonate type with back plate suitable for batten fitting including 9 watt LED bulb.

S & F sheet metal enclosures double door made out of CRCA mild steel sheet, concealed, surface mounting, acrylic door, IP-43 protection, 8 way, DB SPN 230 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB's and Isolators etc including taking down old unserviceable DB.

S & F MCB, SPN, 40 to 63 Amps, 'C' curve , 230 Volts, 50 Hz, breaking capacity not less than 10 KA with over load and short circuit protection and including taking down old unserviceable MCB complete all as specified.

S & F MCB, SP, 6 to 40 Amps, 'C' curve, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection including taking down old unserviceable MCB SP complete all as specified.

S&F blanking plate.

M & L in replacement of earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia light grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note :- (a) PCC chamber shall be constructed at least 1.5 m away from earth pit. Pipe for watering shall be provided in slanting manner. (b) 4mm dia GI wire and 15mm dia light grade GI protection pipe upto 7.5 metre shall deemed to be included in quoted rate.

S & F 18/20 watt Retro LED tube light fitting, wall/surface mounted, IP 20 protection, conforming to IS 16106/IS 16107, minimum 6000K batten decorative type 4 feet long polycarbonate body, white, in built LED driver, power factor>0.95 , Make – all as per Crompton Cat Part No. DMLN1LT8-16 (for batten) and Cat part No. LT8-20-865-2 (for tube light) including 18/20 watt tube rod or equivalent model of any make given in Appx 'B' connecting to electric point by using PVC insulated twin core copper conductor cable of suitable size including taking down old existing light fitting all as directed.

S & F LED recessed ceiling light fitting, high efficiency 600x600mm glare free, homogeneous luminaries 36 Watt 5700K all as per Crompton cat part No LCTLRN-36-FO-CDL or equivalent model of approved make given in list of make Appx 'B' including connecting to electric point by using PVC insulated twin core copper conductor cable of suitable size complete.

S & F energy efficient LED street light fitting of 45 Watt maintainable type with IP 66 degree of protection, PF > 0.95 with voltage range 140 to 270 Volt, fitting should be provided with inbuilt 5 KV minimum surge protection, short circuit and over voltage protection facility for Driver and fitting including 45 watt LED lamp with GI brackrt - 01 No, MS clamp-02 Nos suitable for walls/ columns and making electrical connection with providing of 1.50 metre long twin core round copper conductor cable of suitable size and testing complete all as per SYSKA cat part No. SSK-SLR-45W or equivalent model of any make given in Appx 'B', Cat Part No. as approved by GE complete all as specified including taking down old unserviceable existing street light fitting of any type and capacity from pole along with accessories. (Note: If at site any nos of geyser, ceiling fan, exhaust fan, electric meter is found before starting the work, the contractor shall hand over these items to Unit Rep in writing to avoid the last minute complicacies and refixing of electric meter is the sole responsibility of the contractor before handing over the site to user.)

Singla Enterprises

SUBHASH ARORA CONSTRUCTION CO

M/s Balvinder Singh Engineer and Contractors