REPAIRS TO LEAKAGE SEEPAGE PLASTERING FLOORING PLUMPING SANITARY FITTINGS AND RELATED CIVIL WORKS AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

Taking down old cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key,scrubbing down with water and removing unserviceable material area,complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15mm thick with CM 1:6 on fair faces of brick surface / stone masonary finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 10mm thick with CM 1:3 on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for Preparing new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newely plastered wall surfaces and applying two coats of Oil bound distemper over a coat of putty of 3 mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newely plastered wall surfaces and applying two coats of cement base paint, complete all as specified and directed.

Demolition of cement concrete (unreinforced) as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and removing debries to a distance n. exc 100 m away from the building, complete all as specified and as directed.

M&L for Plain Cement Concrete 1:2:4 (Nominal Mix), type B-0, (using 12.50 mm graded stone aggregate) in roof padding, kerbs or mud stops, benching,rounded or chamfered on edges including necessary formwork, complete all as specified and as directed.

Taking down existing water proofing treatment including cement plaster and cleaning with wire brushes roughening the surface and hacking out dirt, where directed and disposal of rubbish n.exc 50mm distance from the starting point, complete all as specified and as directed.

M&L for Rendering 10 mm thick in Cement Mortar 1:4 on fair faces of brick work or concrete surfaces, with WPC @3% by weight of cement, finished even and smooth with using extra cement,complete all as specified and as directed. Note:- Supply only water proofing compound shall be measured and paid separately.

M&L for APP based polymeric membrane minimum weighing 3.5kg/sqm and 3mm thick reinforced with polyester non-woven fabric (weight not less than 160gms/sqm) laid on surface applied with bitumenous primer @ 0.25 litres per sqm, by torch application with overlaps 100 mm on the traverse direction and 75 mm on longitudinal direction on existing RCC roof surface and applying one coat of aluminium paint over the top surfaces of membrane @ 0.11 Litres/Sqm, complete all as specified and directed.

Supply only integral water proofing compound

Disconnecting existing tanks exc 250 litre n exc 500 litre capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured and paid separtely.),complete all as specified and directed by Engineer-in-Charge.

Dismantling PVC/cement water tank n exc 500 ltrs capacity complete all as specified and as directed.

Dismantling PVC/cement water tank exc 500 ltrs but n exc 1000 ltr capacity, complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank triple layered ( cylindrical vertical with closed top) hoisted and fixed in position of1000 liters capacity conforming to IS specification,complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank triple layered ( cylindrical vertical with closed top) hoisted and fixed in position of 500 liters capacity conforming to IS specification, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level ) and removing unserviceable material and disposed to low lying area etc, complete all as specified and directed by Engr-in-Charge..

M&L for 25 mm thick cement concrete type B-0 , 1:2:4 ( 12.5 mm graded aggregate ) as in sub floors (leveling course), complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 40mm thick in 1:2:4 type B-1 (20 mm graded aggregate) as in flooring finished even & smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with birla white putty cracks and brooming to remove all dirt etc and applying one coat of Cement based paint on old prepared surfaces of walls, complete all as specified and directed by Engineer-in-Charge.

M&L for prepration of old painted surface of external projection facia/ Chajjas and Roof surfaces including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes and cracks with birla white putty and brooming to remove all dirt etc applying one coats of weather proof paint exterior grade including all scaffolding arrangement, complete all as specified and directed by Engineer-in-Charge.

M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3, complete all as specified and as directed.

M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight), complete all as specified and as directed.

M&L for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2, complete all as specified and as directed.

S&F Closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length, complete all as specified and as directed.

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces, complete all as specified and as directed.

S&F in repair Aluminium powder coated decorative type 20mm dia curtain rod fixing with brackets complete all as specified and directed by Engr-in-Charge.

S&F Aluminium powder coated decorative curtain rod bracket and holder for fixing curtain rod,complete all as specified and directed by Engr-in-Charge.

S&F in repairs tubular towel rail brass chromium plated , 20mm dia, 60cm long between flanges in repairs. Make- Prayag or equivalent.complete all as specified and as directed.

Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets, complete all as specified and as directed.

Material and labour for 7 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed or laid / including powder coated GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main Tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. NOTE: (The rate inclusive of scaffolding and necessary arrangements) complete all as specified and directed by Engr-in-Charge.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and as directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. and Fixed with L-type or J-type or cranked hook bolts including dismantling of existing sheet, complete all as specified and as directed.

S&F 6mm thick Asbestos cement two piece adjustable plain wing ridge in roofs, walls etc. and Fixed with coach screws, complete all as specified and as directed.

S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275,complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for,complete all as specified and as directed.

S&F MS flat iron wind tie fixed to roof confirming to Fe-310-O etc, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons,complete all as specified and as directed.

M&L Non skid ceramic coloured designer seamless tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm,in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engineer-in-Charge.

M&L Glazed ceramic coloured designer seamless tiles (350x250x7) mm/(450X350X7) mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10mm thick screed in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for cutting chases for concealed water tubing in stone wall or concrete block wall or concrete slab or wall etc and making good cutting to facing where required and pointing in cement mortar 1:3 ,cutting exc. 10cm in width but not exc 20cm girth, complete all as specified and as directed.

Taking down or up steel tubing and connection including cleaning for refixing or removal to store of 20 mm dia, complete all as specified and directed.

Ditto as per srl item No 43 above but 15 mm dia, complete all as specified and directed.

S&F water tubing, medium grade, galvanized, with all fittings fixed to wall of 20 mm dia,complete all as specified and as directed.

Ditto as per srl item No 45 above but 15 mm dia, complete all as specified and as directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 of outer dia 20mm fittings on walls/ceiling or laying in floors, complete all as specified and as directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 of outer dia 25mm fittings on walls/ceiling or laying in floors, complete all as specified and as directed.

S&F in repairs PVC valve less syphonic action type flushing cistern low level white, dual flush, ISI marked (IS: 7231) with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor including taking down existing,complete all as specified and as directed.

S&F in repairs fancy type chromium plated 15 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position,complete all as specified and as directed.

S&F in repairs CP soap dish, complete all as specified and as directed.

S&F in repair Vitreous china squatting pan 'Orissa' pattern ' size 580x440mm white, with integral foot rest 'P' or 'S' trap,front or back inlet including connection to trap and to flushing pipe,anti syphonage pipe, etc. Complete making good to floor as existing, complete all as specified and directed by Engr-in-Charge.

S&F in repairs Vitreous china water closet pan ( pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device,complete all as specified and as directed, complete all as specified and as directed.

S&F in repairs stainless steel sink with drainage board,made of 1.00mm thick sheet for kitchen or laboratory with plug,washers waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets,connecting union to pipe, overall size 915mmx460mm, bowl size (410x330x160mm) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Vitreous China Wash hand basin, white, size 580 mm x 450 mm size, excluding taps, chain & plug & porcelain stopper but incl brackets, 40/32 mm dia PVC waste pipe, PVC connection, chromium plate coupling 32 mm dia, approved pedestal & cutting for and pinning ends of brackets or erecting stand,complete all as specified and as directed.

S&F in repair Fancy type pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed as in repair, complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, magnum urinal spreader,pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe,complete all as specified and as directed.

S&F in repair 15mm Bib tap cast copper fancy type chromium plated alloy with capstan handle screwed down screwed for iron pipe or for brass ferrule and fixed in repairs. complete all as specified and directed by Engineer-in-Charge.

S&F in repair Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union alongwith arm 225mm and flange,complete all as specified and as directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms),complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms),complete all as specified and as directed.

S&F aluminium door seal fixed to door shutter with screws,complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S&F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n,exc 0.50 Sqm in each pane, complete all as specified and as directed.

Demolition of brick/stone/boulder masonry, built in cement mortar including all quoins,arches,pillars,etc,but exceeding ashlar facings,dressed stone work and precast concrete, complete all as specified and directed by Engineer-in-Charge.

M&L for half brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:4), complete all as specified and as directed.

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6), complete all as specified and directed by Engr-in-charge.

M/S ASHA ENTERPRISE

DANATION CONSTRUCTIONS

M/S SINGH ENTERPRISE

SHARMA ENTERPRISE

M/S KUMAR AVINASH

M/S New Builders Corporation

M/S Subhadip Enterprise