Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.3 CrAccepted-AOC | ₹1.3 Cr | L-1 | Accepted-AOC L-1 Firm |
| 2 | L-2₹1.8 Cr+₹46.4 L (35.2%)Rejected-Finance 502 5TH FLOOR BUILDING NO 72 LAKSHMI BHAVAN NEHRU PLACE NEW DELHI 110019 | SOUTH EAST | DELHI | 110019 | ₹1.8 Cr+₹46.4 L (35.2%) | L-2 | Rejected-Finance Minutes of CWC-I Meeting held on Dated 20.06.2024 for price bid evaluation. |
| 3 | L-3₹2.0 Cr+₹67.5 L (51.1%)Rejected-Finance 1 IIND PADMA TOWER RAJENDRA PLACE WEST DELHI CENTRAL DELHI DELHI 110008 | WEST DELHI | DELHI | 110008 | ₹2.0 Cr+₹67.5 L (51.1%) | L-3 | Rejected-Finance Minutes of CWC-I Meeting held on Dated 20.06.2024 for price bid evaluation. |
Tender Value
₹1.4 Cr
EMD Value
₹2.2 L
Closing Date
16 Apr 2024, 6:00 pmClosed
Chief General Manager
Vehicle Factory Jabalpur, Jabalpur
Provision of High Mast Lighting Arrangement 34M height with LED Luminaries in VFJ Stadium (04 Nos.)
2024_AVNL_192566_1
ND-2310/VFJ
Open Tender
Electrical Works
Works
180 days
Vehicle Factory Jabalpur
Please refer tender documents
20 documents required · 20 mandatory
₹0
₹2.2 L
MCR-I
29 Jun 2024
30 Mar 2024
18 Apr 2024
30 Mar 2024
16 Apr 2024
2 Apr 2024
1 Apr 2024
Amount
"Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for afts,wells,cesspits,manholes,pier holes,e.t.c n exc 10 sqm on plan and n exc 1.5m in depth and getting out in hard dense soil.
Fine aggregate (sand) for concrete
M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 sq. mm,3.5 core.
M&L for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured,electric power cables (heavyduty) with aluminium conductor, 11000 volts Earthed,grade cross sectional area 120 sq. mm ,3 core
Returning refilling in, including spreading leveling watering and well ramming in layers not ex 25cm.
M&L for Supplying and laying un-reinforced precast concrete cable cover, class LV, type 2 with peak, flat,size 300mm x 180mm x 40mm.
M&L Earthing complete with Copper earth plate electrode 60×60cm ×3.15mm thick electrode and copper strip as earthing lead, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to copper strip 20×3mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.
Supplied & Installed Transformer, step-down, 11/0.433 KVA complete, outdoor/indoor, copper wound capacity 250 KVA,L-3
M&L for Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint.
M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire.
M&L for Air break (switch) insulator for 11000 volts for outdoor use Suitable for current rating of 200 amp.
M&L for Triple pole, mechanically operated, mounted on insulator and steel frame, with operating mechanism worked from ground level, for current rating upto 200 amps,11000 Volts.
M&L for Expulsion fuse single pole upto 25A, 6.6KV
M&L for Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 to 185 sqmm.
M&L for Lightning arresters expulsion type complete with all fittings, transmission class, discharge capacity 65 kilo amp suitable for 11000 volts.
M&L for Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-64(12.0metres long)
SUPPLY INSTALLATION & COMISIONING OF 34 MTRS HIGH MAST TOWER WITH COMPLETE ACCESSORIES WITH 800 WATT LED FLOOD LIGHT ( 40 NOS EACH TOWER)DETAILS ENCLOSED
1. LT Power Panel-200Kw Supply of outdoor type Complete Power Panel, capacity 200KW 3-Phase 440 V ,50Hz supply, installation & commissioning with following Parameters:-Powder Coated Enclosure 1.6 mm CRCA Stainless steel. - Doors and covers shall be provided with PU gasket. -Horizontal & vertical Incoming & outgoing. - Aluminum bus bar of rating 400Amp. - indication lights, LED Type, RYB 230 V AC. - Panel size-60x60x15 inches(Min.). To control 3-phase power supply incoming, & out going as: -Main Incomer supply through 400A MCCB-01 No, -Outgoing supply through 200A MCCB -04 Nos -Outgoing supply through 63A MCCB -02 Nos. -Outgoing supply through 32A MCCB -02 Nos. -Outgoing supply through 16A MCB -02 Nos. -incoming/outgoing Ckt with proper control. -Aluminum bus bar & MCCBs to control LT power supply. -Accessories Make –Scheinider/C&S/HPL/Seimens/Havells ONLY. -followed all safety norms in ckt connections.
Variant Infratech Private Limited
Surya Roshni Limited
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .