Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹21.9 L
EMD Value
₹22,000
Closing Date
22 Oct 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Block Development Officer(BP), Natham
Block Development Office, Natham
Repairs to PUES (North facing RCC Roof) at Pattanampatti, H/O Chellappanaickenpatti, Repairs to PUES (South facing RCC Roof) at Pattanampatti, H/O Chellappanaickenpatti, Repairs to PUES (Tiled Roof) at Pattanampatti, H/O Chellappanaickenpatti
2024_RDTN_490800_1
TN-05-95-SIDS-24-25
Open Tender
Civil Works
Works
90 days
Natham
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹22,000
Block Development Office, Natham
23 Oct 2024
4 Oct 2024
22 Oct 2024
4 Oct 2024
22 Oct 2024
4 Oct 2024
9 Oct 2024
Amount
1. Repairs to Panchayat Union Elementary school (North facing RCC roof) at Pattanampatti, H/O Chellappanaickenpatti Estimate Amount Rs. 9.76 Lakhs
Dismantling existing damaged pressed tiles with weathering course in cement morter carefully for reuse etc
Chipping and roughening the Cement conrete including all labour charges etc., compelte.,
Clean removal of Plastering from wall and ceiling and removed away from the site including all labour charges etc.,complete
Providing weathering course with best quality of broken jelly of size 20 mm uniform guage in pure slacked lime (no sand to be used) over the roof slab in the proportion of brickjelly lime 32:121/2 by volume and laid over in a single layer and consolidated
Finishing the top of roof with one course of machine pressed tiles of size 20cmx20cmx20cm of approved quality laid in cement morter 1:3 mix to 12mm thick mixed with water proofing compound confirming to ISS by 2 % weight of cement used and the joint pointed includingcost and conveyance of all materials to site and all labour charges etc.,complete (40% new tiles)
Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three M.Sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.
Distempering the old walls and ceiling two coate with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer
Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358
Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)
Painting two coats with black board paint for old Black board painting including cost & conveyance of all materials to site and all labour charges etc., complete.
Supplying and fixing in position best quality 110 mm Dia PVC Rain water pipe having ISI mark and providing leak proof joints including fixing to the wall with special PVC/MS clamps including all etc.,complete
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil) - S.D.No: 25
Wiring with 2 x 1.5 sq.m (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150 x 100 x 113 TW switch box for 5A 3pin non inter locking CS plug with painting of suitable colour with continuos earth wire connection of 14 SWG TC wire for open PVC plug - S.D.No: 36
Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point - SD No: 40
Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting - S.D.No: 88
Towards the cost for Providing exclusive Cub board with Locking facility for Teachers including cost and conveyance and all labour charges etc.,complete
Towards the cost for Providing exclusive Cub board for keeping the Lunch boxes of the Students including cost and conveyance and all labour charges etc.,complete
Towards the cost for Construction of Pedastal for keep the HDPE drinking water storage tank including cost and conveyance and all labour charges etc.,complete
Towards the cost for Construction of Chappal rack including cost and conveyance and all labour charges etc.,complete
Towards the cost for Providing BaLA painting including all charges etc.,complete
Towards the cost of painting and lettering of Name board with scheme details including all charges etc.,complete
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
2. Repairs to Panchayat Union Elementary school (South facing RCC roof) at Pattanampatti, H/O Chellappanaickenpatti Estimate Amount Rs. 5.31 Lakhs
Dismantling existing damaged pressed tiles with weathering course in cement morter carefully for reuse etc
Chipping and roughening the Cement conrete including all labour charges etc., compelte.,
Clean removal of Plastering from wall and ceiling and removed away from the site including all labour charges etc.,complete
Providing weathering course with best quality of broken jelly of size 20 mm uniform guage in pure slacked lime (no sand to be used) over the roof slab in the proportion of brickjelly lime 32:121/2 by volume and laid over in a single layer and consolidated
Finishing the top of roof with one course of machine pressed tiles of size 20cmx20cmx20cm of approved quality laid in cement morter 1:3 mix to 12mm thick mixed with water proofing compound confirming to ISS by 2 % weight of cement used and the joint pointed includingcost and conveyance of all materials to site and all labour charges etc.,complete (40% new tiles)
Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three M.Sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.
Distempering the old walls and ceiling two coate with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer
Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358
Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)
Painting two coats with black board paint for old Black board painting including cost & conveyance of all materials to site and all labour charges etc., complete.
Supplying and fixing in position best quality 110 mm Dia PVC Rain water pipe having ISI mark and providing leak proof joints including fixing to the wall with special PVC/MS clamps including all etc.,complete
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil) - S.D.No: 25
Wiring with 2 x 1.5 sq.m (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150 x 100 x 113 TW switch box for 5A 3pin non inter locking CS plug with painting of suitable colour with continuos earth wire connection of 14 SWG TC wire for open PVC plug - S.D.No: 36
Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point - SD No: 40
Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting - S.D.No: 88
Towards the cost for Providing exclusive Cub board with Locking facility for Teachers including cost and conveyance and all labour charges etc.,complete
Towards the cost for Providing exclusive Cub board for keeping the Lunch boxes of the Students including cost and conveyance and all labour charges etc.,complete
Towards the cost for Construction of Pedastal for keep the HDPE drinking water storage tank including cost and conveyance and all labour charges etc.,complete
Towards the cost for Construction of Chappal rack including cost and conveyance and all labour charges etc.,complete
Towards the cost for Providing BaLA painting including all charges etc.,complete
Towards the cost of painting and lettering of Name board with scheme details including all charges etc.,complete
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
3. Renovation of Panchayat Union Elementary School building (Tiled Roof) at Pattanampatti, H/O Chellappanaickenpatti Estimate Amount Rs. 6.80 Lakhs
Dismantling the damaged Mangalore tiles and clearing away from site including all labour charges
CC 1:4:8 mix using 40mm ISS HBG metals including cost and conveyance of all materials and all labour charges etc., complete complying with standard specification and as directed by the departmental officers.
Supply and delivery of MS Hollow tubular sections of size 100mm x 50mm x 3.20mm having a unit weight of 7.01 kg/m including cost and conveyance of all materials to site and labour charges for cutting, welding and fixing the truss to propoer position etc., complete
Supply and fixing of PUF roof panels made up of minimum 0.5mm thick PPGI corrugated Sheet at the top and a plain sheet at the bottom with a layer of rigid CFC free polyurethane foam (PUF) of density 40kg + 2 Kg/cum as insulation in between .The polyurethane foam shall confirm to latest IS 12436. The minimum thickness of PU foam layer shall be 29mm for having 30mm (min) thick PUF panel. The PPGI Sheets shall be of minimum 240 MPA Steel Grade & shall have a Zinc coating of minimum 120 GSM as per IS 277/1992, 5-7 microns of epoxy primer on both sides of the sheet & polyester top coat of 18-20 microns on one side / outer side. The PPGI Sheets / PUF Panels shall have a protective guard film of minimum 20-25 microns to avoid scratches to finished panel during transportation. Providing ridges or hips ,encasing the ends of Panel with plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers etc complete excluding the cost of trusses, purlins and inclusive of cutting to size and shape wherever required.
Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers.
Distempering the old walls and ceiling two coate with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer
Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358
Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)
Painting two coats with black oxide paint including cost & conveyance of all materials to site and all labour charges etc., complete.
Wiring with 2 x 1.5 sq.m (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light point/fan point(for electronic regulator) - S.D.No: 20
Wiring with 2 x 1.5 sq.m (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150 x 100 x 113 TW switch box for 5A 3pin non inter locking CS plug with painting of suitable colour with continuos earth wire connection of 14 SWG TC wire for open PVC plug - S.D.No: 36
Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting - S.D.No: 88
Towards the cost for Providing exclusive Cub board with Locking facility for Teachers including cost and conveyance and all labour charges etc.,complete
Towards the cost for Providing exclusive Cub board for keeping the Lunch boxes of the Students including cost and conveyance and all labour charges etc.,complete
Towards the cost for Construction of Pedastal for keep the HDPE drinking water storage tank including cost and conveyance and all labour charges etc.,complete
Towards the cost for Construction of Chappal rack including cost and conveyance and all labour charges etc.,complete
Provision for Name Board
Towards the cost for Providing BaLA painting including all charges etc.,complete
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
Manikam (BID ID -1169863)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .