MAINTENANCE/REPAIR OF GHSS CANAL ROAD, HSS SUNJWAN AND CEO OFFICE, JAMMU DISTT JAMMU

Amount

Surface dressing of the ground including removing vegetation and in-equalities not exceeding15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m in :All kinds of Soil

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:5:10 (1 cement 5 coarse sand 10 graded stone agg. 40 mm nominal size) crushed including all lift & carriage complete job.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:3:6(1 cement 3 coarse sand 6 graded stone agg. 20 mm nominal size) crushed including all lift & carriage complete job

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ( Size of tile 60x60cm )

Engagement of labour for dismantling of old flooring and disposal of material thereof.

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand) including all lift & carriage complete job.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Distempering with oil bound washable distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade.

Distempering with oil bound washable distemper ofapproved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer

Demolishing brick tile covering in terracing including stacking of sevicable material and disposal of unserviceable material within 50mt lead

Demolishing mud phaska in terracing and disposal of material within 50mt lead

Painting top of roof with bitumen of app. Quantity of 17kg/sqm in pragnated with a coat of coarse sand at 16 Cum/10sqm including cleaning the slab surface with brushes and finally with a piece of cloth tightly soaked in kerosine oil complte with a reausidual type of petroleum bit. of penetration 80/100

Providing & laying Tar sheet roof complete job as per direction of engineer incharge at site

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhura at 35 kg per Cum of earth and gobri leaping with mixed 1:1 (1 clay: 1 cowdung ) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement: 3 fine sand ) mixed with 2% of integral water proofing compound by wt of cement and finishing neat with F.P.S Brick Tiles including all lift & carriage complete job.

Providing gola 75*75mm in cement concrete 1:2:4(1 cement 2 coarse sand 4 stone agg. 10mm and down gauge including finishing with cement mortor 1:3(1 cement3 fine sand) as per standard design in 75*75 mm deep chase

Making khurras 45*45cm with average minimum thickness of 5 cm cemnt concrete 1:2:4(1 cement 2 coarse sand 4 graded stone agg. Of 20mm nominal size) over pvc sheet 1m*1m*400 micron finished with 12mm cement plaster 1:3 (1 cement 3 coarse sand) and a coat of neat cement rounded the edges and making and finishing the outlet complete

Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: Bituminous road.

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with water proofing cement paint ofrequired shade: Old Work (one or more coats applied@ 2.20 kg/1 Osqm) over priming coat of primer applied@ 0.80 litrs/1 Osqm complete including cost of priming coat.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: one or more coats on old work

ANIL MEHTA

Ranjit chopra

Sham Dass

Jaswant Singh

YAWAR AHMED