Provision of Inline BHS at LEH

Amount

SH:I SITC OF PASSENGER BAGGAGE HANDLING SYSTEM SUPPLY OF DEPARTURE CONVEYOR SYSTEM Design, Manufacturing and supply of following equipments/components of departure conveyor system compatible for in-line CT-EDS Baggage Screening system and conveyor layout drawings, including BHS component, IT network and control cables from control panel to various drive units, accessories as per technical specification and any other item as required for successful commissioning of system including all taxes, duties, freight and insurance etc but excluding GST of following (excluding x-ray machines).

Check-in conveyor system in two sections comprising of weighing section and dispatch conveyors of minimum length of 1.2 meters each manufactured or clad in polished SS including toppling devices, weighing scale, operator control panel, frame, belts, Stainless Steel side guards, push buttons complete with drive unit for each conveyor section, drive mechanism, all accessories etc.

Required section of Heavy duty Slider Bed Belt take away conveyor of minimum width of 1000mm, bed made of galvanized or epoxy coated mild steel sheet, 2 ply PVC belt, formed plate side fascia covered with SS-304 grade stainless steel of complete with drivers, drive mechanism, pulleys, rollers, conveyor structure all accessories, protection devices.

Heavy Duty Slider Bed Belt Transport belt conveyor minimum width of 1000 mm, bed made of galvanized or epoxy coated mild steel sheet, PVC belt, both- side raised side wall 300 mm (minimum) MS sheet with epoxy-coated paint finish complete with drivers, drive mechanism etc.

Queuing / metering Conveyors of minimum 1.2 metre length, inner useful belt width shall be minimum 1000mm as per requirement nominal width between side walls including required motors, drive units, soft / VFD starter, control panels as required, wirings, cabling upto control panel etc. suitable for high start/stop frequency for departure BHS as per design with grooved belt as required, complete in all respect and as per Technical specifications and Drawings.

Horizontal Divertors for transfer of the baggage to a spur conveyor that shall be set at an angle of 90 degrees (horizontal plane) to the delivery conveyor including drive units as per technical specification.

90 degrees powered belt bends

Height limiter/ over height detection made of stainless steel with photo sensors to detect the over height of baggage including proper support arrangement and fault reset button etc. complete in all respect and as per technical specifications

Automatic Tag Reader for departure conveyor system suitable for 360 degree scan as per technical specifications.

Flat makeup carousel of approx. 71 metre loop length complete with drivers, drive mechanism, all accessories etc.

Supply of Ball Table constructed from Heavy Duty Mild Steel box section, with mild steel balls securely attached to the table of nominal dimension 1500 mm x 1500 mm etc. complete in all respect and as per technical specification.

Supply of Baggage Status Display (BSD) unit along with associated work stations at level- 3 and Level 4 with remote control box for communication to PLC CPU incluiding minimum 21'' BSD display, Hand held Scanner, Serial Communication with SVS Computer of CTX system, Remote Interface box for communication with PLC CPU, BSD user application software, and BSD Communication Software Module and reporting server with PLC CPU and reporting Client software confirming to TSA/ECAC requirement etc. complete in all respect and as per technical specification.

Vertical Spiral Chute from Level 2 to Level 1 (Inlet baggage level 3309.09 mtr and delivery level at 3301.80 mtr) complete as per specifications.

Microprocessor based control panel consisting of PLC unit, suitable soft starting mechanism, consisting of control switches, sensors, protective devices against overload, earth leakage, single phase preventor, emergency stop push buttons, power cables, control cables and other components suitable for operation & safety of departure baggage conveyor including complete integration with departure conveyor and for interfacing & integrating with CT-EDS including supply of required length of power and control cables etc. required for power distribution for the departure conveyor system complete in all respect & as per technical specifications.

SUPPLY OF ARRIVAL BAGGAGE CONVEYOR SYSTEM: Design, engineering, manufacturing, procurement of raw materials and bought out components, fabrication, inspection, shop painting (primer + finish coat), testing at manufacturer's work, packing, supply of Arrival Baggage Conveyor system including supply of all commissioning spares, special tools and tackles, first fill of oils, lubricants etc., training to client's personel at site, drawings and documentation as per the enclosed drawings, scope of work, job specifications and other codes & standards attached or referred. :

Heavy duty endless race track type inclined arrival passenger baggage claim carousal of loop length 60 meters each measured along with centre line, useful width 1200 mm (minimum), complete with flexible overlapping slats, slat carrier made of MS painted or die cast aluminium, chain consists of robust cast aluminium links, frame work, stainless steel raised side wall / trim / facia finish, toe kick plate of MS construction, complete with drive unit, drive mechanism, all accessories etc. as required.

Heavy Duty Slider Bed Belt Feeder Baggage conveyor of minimum width of 1000 mm, bed made of galvanized or epoxy coated mild steel sheet, PVC belt, both- side raised side wall 300 mm (minimum) MS sheet with epoxy-coated paint finish complete with drivers, drive mechanism, all accessories etc.

90 degrees powered belt bends

Microprocessor based control panel consisting of PLC unit, suitable soft starting mechanism, consisting of control switches, sensors, protective devices against overload, earth leakage, single phase preventor, emergency stop push buttons, power cables, control cables and other components suitable for operation & safety of arrival baggage conveyor including complete integration with arrival conveyor including supply of required length of power and control cables etc. required for power distribution for the arival conveyor system complete in all respect & as per technical specifications.

SUPPLY OF COMMOM ITEM FOR DEPARTURE AND ARRIVAL CONVEYOR: Design, engineering, manufacturing, procurement of raw materials and bought out components, fabrication, inspection, shop painting (primer + finish coat), testing at manufacturer's work, packing, supply of folowing items Baggagae Handling System (Departure and arrival Baggage Conveyor system) including supply of all commissioning spares, special tools and tackles, first fill of oils, lubricants etc., training to client's personel at site, drawings and documentation as per the enclosed drawings, scope of work, job specifications and other codes & standards attached or referred. :

Gravity roller Conveyors formed from 50 mm diameter heavy duty rollers at an appropriate pitch to suit the intended duty made out of utility grade stainless steel including support.

Draught curtains in the wall opening between Passenger and Non-Passenger area

Motorized rolling shutter fire/ security doors of 120 minutes fire resistance where conveyor pass through walls complete with drivers, all accessories, controls, all electricals etc.

Design, supply, installation, testing and commissioning and integration of SCADA system with PLC for departure and arrival system consisting of SCADA server indicating GUI, alarm and msg, start stop, LAN Profi Bus/ ProFi Net connectors etc.. Job includes supply of all type of hardware and licensed SCADA software along with redundant reporting server with necessary installations, accessories to accure, process, store and retrieve the baggage processing data confirming to TSA/ECAC requirement and SITC of PC and coloured printers suitable for printing on A4 paper etc. complete in all respect and as per technical specificatios

INSTALLATION, TESTING & COMMISSIONING (ITC) OF BAGGAGE CONVEYOR SYSTEM Installation, Testing and Commissioning of Departure Conveyor System : Installation, Testing and Commissioning of following items including minor civil works such as grouting of structures and making good the same and required MS structure consisting of Beams, Hangers, Steel plates, Support legs, Chequrred / mesh plates, Nuts and Bolts, Catwalks, Platforms, Kick plates/side plates etc. for the inspection/ installation/ maintenance of various BHS items at the Airport site including installation, testing and commissioning of control panel along with necessary out going cables/wire, earthing for drive unit motor & limit switches, draught curtains, Emergency stop push buttons, main and controls, indications, annunciation, IT network and control cables etc. as required including power cabling complete as required. as per Technical specification .

Check-in conveyor system in two sections comprising of Weighing and Dispatch conveyor

Take away/collector conveyor

Transport Conveyor (Straight/inclined/declined)including Drive Unit

Queuing / metering Conveyors

Horizontal Diverters/Pushers including Drive Units

90° Power curves

Height limiter

360° Automatic Tag Reader

Flat makeup carousel of approx. 71 metre loop length

Ball Table

Baggage Status Display (BSD) Unit

Vertical Spiral Chute

PLC based control panel for Departure Conveyor.

Installation, Testing and Commissioning of Arrival Conveyor System: Installation, Testing and Commissioning of following items including required civil works such as grouting of structures and making good the same at the Airport site including installation, testing and commissioning of control panel along with necessary out going cables/wire, earthing for drive unit motor & limit switches, Emergency stop push buttons, main and controls, indications, annunciation, IT network and control cables etc. as required including power cabling complete as required. as per Technical specification .

Heavy duty endless race track type inclined arrival passenger baggage claim carousal

Heavy Duty Slider Bed Belt Feeder Baggage conveyor

90 degrees powered belt bends

PLC based control panel for Arrival Conveyor.

Installation, Testing and Commissioning of Common Items: Installation, Testing and Commissioning of following items including required civil works such as grouting of structures and making good the same at the Airport site with necessary out going cables/wire, earthing for drive unit motor & limit switches, Emergency stop push buttons, main and controls, indications, annunciation, IT network and control cables etc. as required including power cabling complete as required. as per Technical specification .

Gravity roller Conveyors

Draught curtains in the wall opening between Passenger and Non-Passenger area

Motorized rolling shutter

Integration of SCADA system

PART -II SITC OF CT-EDS (Computed Tomography -X-Ray Explosive Detection System) Supply of following equipments as per Technical Specifications complete in all respect for successful commissioning of the system.

Supply of LeveI-1 High Throughput (1200 bags/hour minimum) Baggage Screening systems confirming to TSA / ECAC standard 3 meeting BCAS requirements with suitable UPS, control panel, electrical interface components, cables, peripherals accessories etc. & all other components required for meeting technical/operational requirements complete in all respect and as per Technical specifications.

Supply of Matrix server with required UPS, fully loaded & environment controlled rack, KVM switch, foldable LCD monitor, cables etc. & all peripherals & components with full redundancy as required complete in all respect and as per Technical specifications .

Supply of Level-2 and Level 3/4 analyst/ recheck workstations with conversion suitable UPS, cables and all accessories as required complete in all respect and as per Technical specifications.

Supply of Local Area Networking components which includes required switches (4gb/1gb), cables(OFC/UTP), Media Converter, Racks, patch panels, LIU, ProFI Bus/ ProFi net connectors & all required accessories etc. with full redundancy as required & as per technical specifications.

Installation, testing and commissioning of the following equipments as per Technical Specifications complete in all respect for successful commissioning of the system.:-

Assembling, positioning, installation, testing and commissioning of CT-EDS machines with all accessories in the existing enclosure including special material handling equipments , minor civil work such as grouting of structures etc. at the Airport site as required and as per Technical specification .

Installation, Testing and Commissioning of Matrix server with all peripherals & components including fixing the rack to the floor as required complete in all respect and as per Technical specifications.

Installation, Testing and Commissioning of LAN sytem with all peripherals & components including fixing the rack to the floor as required complete in all respect and as per Technical specifications.

Installation, Testing and Commissioning of Level-2 and Level 3/4 analyst/ recheck workstations with all accessories including connecting them with CTX Machines with all interface requirements as required complete in all respect and as per Technical specifications .

SH:III Annual Operation & Comprehensive Maintenance Contract OPERATION: Operation of complete Baggage Handling System (excluding CT-EDS, XBIS, ETD, etc.) by providing requisite man-power, tools, equipments, consumables, technical support and clearing bag jams during operations for BHS as Specified in SCC and Technical Specification.

Year 1 (during DLP)

Year 2 (during DLP)

All Inclusive Comprehensive Maintenance Contract (AICMC): All Inclusive Comprehensive Maintenance of complete Baggage Handling System (excluding CT-EDS, XBIS, ETD , servers, work stations, other associated equipments, etc.) by providing requisite man-power, all required spares, tools, equipment, consumables, technical support for preventive & corrective maintenance for as Specified in SCC and Technical Specification.

During warranty period year 1

During warranty period year 2

All Inclusive Comprehensive Maintenance Contract of Screening sytem i/c CT-EDS, servers, work stations, other associated equipments etc. as mentioned under SH:II after DLP of two years by providing requisite man-power, all required spares, tools, maintenance equipment, consumables, preventive & corrective maintenance and technical support as specified in SCC, Technical Specification and particular specifications of operation & AICMC with complete in all respect.

During warranty period year 1

During warranty period year 2

Bidder Name

Amount in Words

BEUMER INDIA PRIVATE LIMITED

Three D Integrated Solutions Ltd

BEUMER INDIA PRIVATE LIMITED