Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹38.9 L+₹2.3 L (6.17%)Rejected-Finance 306 SHIV BARI MARG PANCHVATI NAGAR BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹44.6 L+₹7.9 L (21.6%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹47.0 L+₹10.3 L (28.1%)Rejected-Finance H NO 257 1ST FLOOR KAMALA NEHRU NAGAR BATHINDA PB | BATHINDA | BATHINDA | PUNJAB | L4 | Rejected-Finance Other than L1 |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
14 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF) Bhisiana
GE(AF) Bhisiana
As per BOQ/ Price Schedule
2023_MES_623755_1
GE/BHI/T-33/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE(AF) Bhisiana
As per NIT/ Tender documents
6 documents required · 6 mandatory
₹500
GE(AF) Bhisiana
₹80,000
19 Dec 2023
17 Oct 2023
16 Nov 2023
17 Oct 2023
14 Nov 2023
1 Nov 2023
17 Oct 2023 - 28 Oct 2023
Amount
M&L for Repair/Maintenance to existing sliding Hangar door shutter, each leaf of size exc 2.50 M but n.exc 7.50 (clear width) and 7.50 to 9.00 M (clear height), straightening of worn-out top & bottom rails,replacing unserviceable rollers,tightening/replacing the loose nut and bolts, necessary /required welding, replacement of broken locking arrangement oiling, greasing etc and positioning of door shutter in same opening for smooth functioning of hanger door shutter incl. resetting of derailed steel gates on the existing rail, welding, drilling, etc complete all as specified and as directed. Note:- (a) Repair Work shall be carried out on Quaterly basis (i.e. after Every 3 Months and when required on urgent basis) (b) The replacement of broken/old parts such as Nuts, Bolts, Rods, Flat Iron, Angle Iron, channel ,Guide Rail, Ball Bearing, and welding work etc shall be measured and paid seperately.
M&L Cleaning/greasing/oiling of 'Hangar wheel track/Rail at Top' of any description,welding of members if required tightening of screws/nuts,bolts of door and wheels etc including rectifying the alignment of top guide channel /Rail/ Angle & connecting members etc complete for smooth functioning of hangar doors all as specified and as directed by Engr-in-charge. Note:- (a) Repair Work shall be carried out on Quaterly basis (i.e. after Every 3 Months and when required on urgent basis) (b) Rate of scaffolding, ladders, safety arrangements and any other arrangements as required shall be deemed to be included in quoted rates. (c) The replacement of broken/old parts such as Nuts, Bolts, Rods, Flat Iron, Angle Iron, channel ,Guide Rail, Ball Bearing, and welding work etc shall be measured and paid seperately.
M&L Cleaning/greasing/oiling of 'Hangar bottom rail track ' of any description,welding of members if required tightening of screws/nuts,bolts of door and wheels etc including rectifying the alignment of bottom guide channel /Rail/ Angle & connecting members etc complete for smooth functioning of hangar doors all as specified and as directed by Engr-in-charge. Note:- (a) Repair Work shall be carried out on Quaterly basis or when ever required on urgent basis) (b) The replacement of broken/old parts such as Nuts, Bolts, Rods, Flat Iron, Angle Iron, channel ,Guide Rail, Ball Bearing, and welding work etc shall be measured and paid seperately.
M&L for Oiling and greasing to pullies of each steel sliding hangar doors, cleaning with using standard thinner such as carbon tetra chloride/ Benzeen and making smooth functioning to reduce the friction of door complete all as specified and directed. Note:- (a) Repair Work shall be carried out on Quaterly basis (i.e. after Every 3 Months and when required on urgent basis) (b) Rate of scaffolding, ladders, safety arrangements and any other arrangements as required shall be deemed to be included in quoted rates.
M&L Running Welding in Repairs, Thickness of Metal to be welded not exceeding 6.0mm and not exc. 2.5 Cm in Length for Steel Gate,hangar gate, etc. complete all as specified and as directed.
M&L Running Welding in Repairs, Thickness of Metal to be welded not exceeding 6.0mm and exc. 2.5 cm in length but not exc. 5 Cm in Length for Steel Gate,hangar gate, etc. complete all as specified and as directed.
M&L Running Welding in Repairs, Thickness of Metal to be welded exceeding 6.0 mm but not exceeding 9.0mm and not exceeding 2.5 Cm in Length for Steel Gate,hangar gate, etc. complete all as specified and as directed.
M&L Running Welding in Repairs, Thickness of Metal to be welded exceeding 6.0 mm but not exceeding 9.0mm and exceeding 2.5 cm in length but not exceeding 5 Cm in Length for Steel Gate,hangar gate, etc. complete all as specified and as directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings at any height upto 20 mtr with necessary scaffolding arrangement as directed by Engr-in-charge.
S&F 0.50 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap , fixed with self taping screws and washers or L-type,J type or cranked hook bolts , in hangar roofs, walls cladding etc. with grade of zinc coating 275 at height upto 20 mtr. complete all as specified and as directed by Engr-in-charge.
Except sheeting of any thickness ,any type, fixed with self taping screws and washers or L-type, J type or cranked hoohk bolts , in hangar roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed.
S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in hangar roof,ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 and including welding or soldered joints are provided at height upto 20 mtr. complete all as specified and as directed.
S&F pre-painted olive green galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenth of 550 Mpa as in hangar roof covering/cladding to wall,fixed with self tapping screws or L/J- type hook at height upto 20 mtr as required all as specified and as directed.
S&F 2.0 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in hangar roof, wall cladding etc.at height upto 20 mtr complete all as specified and directed.
S&F 2.0 mm thick Fibre glass reinforced translucent plain sheeting with two corrugations side lap fixed with coach screw and washer in hangar roof, wall etc. complete all as specified and directed.
M&L for Preparation of old corrugated, semi corrugated/ plain steel surface of any description as on steel gates , steel wall/cladding surface over 10cm width or girth and applying a coat of Synthetic Enamel Paint in camouflaging pattren @ 0.90 litre/10 sqm as per new Sigma pattern generated by Station Authourity and new Sigma pattern approved by the Station Autourity and RGB Value variation from 110 to 171 by using 4 to 5 Colour shades as per approved pattern at a height n.exc 25 mtr as per sample approved by GE complete all as specified and directed by Engineer-in-Charge. Note : The % of the colours may change without any financial effect.
M&L for preparation of new Corrugated, Semi Corrugated/ Plain steel surface of any description as on sloped roof , wall/cladding surface over 10cm width or girth and applying two coats of Synthetic Enamel Paint in camouflaging pattren @1.43 litre/10 sqm over and including priming coats of exterior primer of same make applied on steel surface @0.9 litre/10 sqm as per new Sigma pattern generated by Station Authourity and RGB Value variation from 110 to 171 by using 4 to 5 Colour shades as per approved pattern at a height n.exc 25 mtr as per sample approved by GE complete all as specified and directed by Engineer-in-Charge. Note : The % of the Colours may change without any financial effect.
S&f in repair stainless steel wind driven industrial air vent circulator with capacity 2700 CFM to be mounted on top of FRP bore plate size 1.5 ft X 3.5 ft x 2 mm thick venture doom including necessary cutting of existing hangar roof sheets, ceiling with water tight arrangement etc, complete with supporting arrangements and having following technical specification of fan:- Throat dia- 590-630 mm Body dia - 680-760 mm, Height = 430-450 mm Nos of blades/fins-35 -40 (SS thickness of fins : 0.50 mm Moc of top cover & mounting ring SS internal fitting (shaft,base frame & connecting rods) GI revolution mechanism diuble je sealed wall bearing and self lubricated bylon brush,fixing at site as per manufacturer instructions at height upto 20 mtr complete all as specified and directed by Engr-in-charge.
S&F of Bird proof wire net (nylon material) of size 25 x40 mm, in hanger ceiling upto an height of 15 mtrs incl taking down,required drilling in RCC/Brick wall for fixing with screw or bolts etc and making area good, complete all specified and directed. Note: All necessary arrangements like scaffolding, ladder , cradles etc will be procured by contractor for smooth execution and protective measures without any extra cost to department.
Supply and fixing 200 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including clamps of flat iron and nut bolts including dismantling of old rain water pipe etc in repairs complete all as specified and as directed.
Supply and fixing 200 mm bore PVC (SWR) bends any radius incl couplers (if required), complete all as specified and as directed by Engineer in Charge.
Supply and fixing 200 mm bore PVC (SWR) reducers any radius , complete all as specified and as directed by Engineer in charge.
M&L Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way small articles conforming to Fe-290 Gde-E-165,complete all as specified and as directed by Engineer in charge.
Taking down carefully the hood of steel rolling shutter of size not exceeding 5 sqm each for replacement of unserviceable/ defective parts and refixing in the same opening after cleaning of guide rails, laths, top cover by kerosene and proper greasing, oiling, replacement of rusted nut, bolts etc. removing of bend, alignment etc to make good the system and to made good the disturbed surfaces of walls including periodicals to match with the existing complete all as specified and directed by Engr-in-charge. Note :- (i) The unserviceable parts to be replaced shall be measured and paid for separately as "Supply only". (ii) Quoted rate shall be inclusive of providing missing nuts bolts, greasing, oiling, denting, tension to spring etc.
All as per item No 24 above but size exceeding 5 sqm & not exceeding 15 sqm each complete all as specified and directed by Engr-in-charge.
All as per item No 24 above but size exceeding 15 sqm & not exceeding 25 sqm each complete all as specified and directed by Engr-in-charge.
S&F 1.25mm thickness of Steel laths or top cover bent to shape match with existing for rolling shutters without ball bearing including one shop coat of primer and erected in position complete all as specified and directed by Engr-in-charge.
M&L for replacement of gear box of steel rolling shutter including handle rack & pinion system, ball bearing, End Cap, Aluminium Box Top Octagonal Tube Security Spring etc for rolling shutter of size exceeding 5 sqm but not exceeding 25sqm each to make it serviceable Including minor repair complete all as specified and directed by Engr-in-charge.
M&L for repair to gear box, rack & pinion system, bearing including necessary welding etc for rolling shutter of size exceeding 5 sqm but not exceeding 25sqm each to make serviceable including minor repairs complete all as specified and directed by Engr-in-charge.
S&F in replacement of Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by Engr-in-charge.
S&F in replacement of Ball bearing of any dia for rolling shutters complete all as specified and directed by Engr-in-charge.
S&F Steel rolling shutters of 1.25mm thickness of laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated of gear operated type with bevel gear box and crank handle including taking down of existing shutter complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer in charge.
M&L 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregate as only top floor finish repairs & making good to match and levelled with existing surface or surrounding surface complete all as specified and directed.
M&L for Cleaning, Cheking & Cutting as required and Repair of edges with epoxy of hanger door tracks/rail making good to existing surface complete all as specified and directed by Engineer-in-Charge.
Taking down existing hangar door wheel shaft of hangar door, cutting by gas welding etc with necessary arrangement for lifting door through jack etc, for removing hangar door wheels, complete all as specified and directed.
S&F in repair Hangar door wheel not less than 25.00 Kgs each, fixing in position by lifting existing hangar door to put in position, greasing and with necessary lifting, jacking, welding work including fixing of shaft with two or more Nos Ball bearings of suitable size with locking pin etc complete all as specified and directed. (Note : Ball Bearing shall be measured and paid for separately)
M&L for re-fixing of wheel at same position (obtained from item No 36 above) after overhauling to existing hangar door wheel through greasing, alingment, changing shaft alongwith safety pins, making functionable, complete all as specified and directed.
S&F in replacement of Ball bearing of any dia for hangar wheels complete all as specified and directed by Engr-in-charge.
S&F in repairs hangar door wheel (top of hangar door height n. exc 15m) of dia not exceeding 200mm, 30-50 mm thick, having hole on centre n. exc 20 mm dia to fix nuts and bolts to facilitate to hangar door move smoothly, fixing in position by lifting existing hangar door to put in position, greasing and with necessary welding work etc complete all as specified and directed. Note:- (a) Rate of scaffolding, ladders, safety arrangements and any other arrangements as required shall be deemed to be included in quoted rates.
S&F in repair Mild steel screw bolt Machine made with hexagonal or square head at one end and scewed at another end or screwed at both end to be fitted with washer exc 10cm and n exc 15 cms long of shank dia 16 mm to 20 mm, complete all as specified and as directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc,complete all as specified and as directed.
M&L Mild Steel Framed Work such as hangar Steel Doors or Gates of Angle or other Sections with Gusset Plate, Rails, Braces, etc as required at site or directed, drilled for fixing of Steel Sheeting or other Covering, Doors, etc. to be prepared for hanging or sliding with and including either Hooks and Hinges or Steel Hanging Door Fittings (exclusive of Steel Sheeting or other Covering, Running Rails and Guides) and hanging; also fastening and fixing confirming to Fe-290, Gde-E-165,complete all as specified and as directed by Engr-in-charge.
M&L 1.0 mm thick Mild steel, plain sheet in wall/vertical surface cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.
Hacking out old broken glass ( any thickness, size, quality or description ) from metal frame incl punching or drilling out old glazing pins and providing fixing new one 4.0 mm glass, exc 0.5 sqm each pane complete all as specified and directed by Engineer in Charge.
M&L preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer at height upto 15 mtr, complete all as specified and directed by Engineer in Charge.
M&L preparing Old Treated/Painted Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality),at height upto 15 mtr. complete all as specified and as directed.
M&L preparing for old concrete/ brick Surfaces of any description over 10cm girth or width, not otherwise described applying two coats of Synthetic Enamel Paint (First quality) over a coat of Primer complete all as specified ad directed by Engr-in-charge
M/s Luxmi Constructions
GUPTA AND ENGINEERS
SUBHASH ARORA CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .