Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.9 CrAccepted-AOC OFFICE NO 112 FIRST FLOOR GANESH KHIND ROAD AUNDH PUNE 411067 | PUNE | PUNE | MAHARASHTRA | 411067 | ₹5.9 Cr | L1 | Accepted-AOC WO Dated 16.5.2023 |
| 2 | Rejected-Technical | - | - | Rejected-Technical Rejected.Kindly Check The Attached Pdf File |
| 3 | Rejected-Technical MADANI TA MEHKAR DIST BULDHANA | MADANI | BULDHANA | MAHARASHTRA | - | - | Rejected-Technical Rejected.Kindly Check The Attached Pdf File |
Tender Value
₹5.9 Cr
EMD Value
₹3 L
Closing Date
4 Aug 2022, 6:00 pmClosed
EE BID Buldana
BID Buldana
Civil and Hydro-Mechanical package of Dnyanganga Medium project Tq. Khamgaon Dist. Buldana (Rehabilitation, Improvement and Basic Facility of DNYANGANGA Dam in Buldana District of Maharashtra under DRIP-II)
2022_WRDWB_819058_1
e-Tender NIT01/2022-23
Open Tender
Civil Works
730 days
Khamgaon
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,360
₹3 L
7 Jun 2023
19 Jul 2022
8 Aug 2022
19 Jul 2022
4 Aug 2022
19 Jul 2022
Amount
PART A CIVIL WORKS(Dam Work)
Cleaning grass and removal of rubbish outside the periphery of the area as directed. with all lead and lifts (with Contractor’s own material)
Cutting down trees including cutting trunks & branches and stacking the material as directed including uprooting and refilling the pit with material etc. complete as directed (excluding extra material required for refilling). with all lead and lifts (with Contractor’s own material)
(a) Girth between 30 cm to 60 cm
(b) Girth between 60 cm to 90 cm
Excavation in all kinds of soil including boulders upto 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with all lead and lifts (with Contractor’s own material)
Excavation in hard murum including boulders upto 0.6 m diameter ( 0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete. with all lead and lifts (with Contractor’s own material)
Excavation in soft rock without blasting including boulders upto 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated soft rock neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete. with all lead and lifts (with Contractor’s own material)
Excavation in hard rock of all toughness by breaker including boulders above 0.6 m dia.(0.113Cum) minimising damage to side slopes of excavation and placing the excavated rock neatly in approved dump area including cost of all materials, machinery, labour, levelling bed etc., complete. with all lead and lifts (with Contractor’s own material)
Dismantling dry stone pitching including stacking the material as directed etc complete. with all lead and lifts (with Contractor’s own material)
Providing and constructing 450 mm thick dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips, finishing etc.,complete. with all lead and lifts (with Contractor’s own material)
A) From Borrow area (Complete Rate)
B) From Available material ( labour Rate )
Providing and constructing 150 mm thick Quarry Spalls of approved trap stone quality of specified thickness from approved source including cost of all materials, labour, machinary etc.complete. with all lead and lifts (with Contractor’s own material)
Dismantling the old lime concrete or cement concrete including stacking the material etc.complete as directed. with all lead and lifts (with Contractor’s own material)
Providing and laying in situ cement concrete of grade M-15 of trap/granite /gneiss/ quartzite/graded metal for foundation and bedding with Batching Plant and Transit Mixer including placing,compacting,curing etc. complete with all lead and lifts (with Contractor’s own material)
Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement / RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Batching Plant and Transit mixer with shuttering and scaffolding, placing, compacting, curing etc. complete with all lead and lifts (with Contractor’s own material)
Providing and laying in situ cement concrete of grade M-20 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement/RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Batching Plant and Transit mixer with shuttering and scaffolding, compacting, curing etc. complete with all lead and lifts (with Contractor’s own material)
Providing and laying cement plaster 6 mm thick in C.M. 1:3 single coat without neru finish to concrete surface in all position including scaffolding, curing, including etc.complete. (Cement 0.057 bags/Sqm). with all lead and lifts (with Contractor’s own material)
Drilling 32mm diameter grout holes in concrete / rock by percusion drilling using jack hammer as directed to specified depth for consolidation / contact grouting including cost of all materials, machinery, labour, cleaning holes, ventilation, lightening, drainage and all other ancillary operations etc., complete. with all lead and lifts (with Contractor’s own material)
Grouting cement slurry in grout holes under specified pressure for consolidation / contact grouting including cost of all materials, machinery, labour, redrilling wherever necessary ventilation, lightening, drainage and other ancillary operations etc., complete.Average progress of grouting per shift considered = 1.50 MT. with all lead and lifts (with Contractor’s own material)
Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C.pile caps,footings, foundations, slabs,beams columns,canopies, stair case,newels,chajjas,lintels pardis, copings,fins,arches etc.as per detailed designs,drawings and schedules.including cutting,bending,hooking the bars,binding with wires or tackwelding and supporting as required complete as directed. with all lead and lifts (with Contractor’s own material)
Providing pointing with cement mortar for stone masonry including racking joints, scaffolding, curing etc. complete as directed.(B) In Cement mortar 1:2. with all lead and lifts (with Contractor’s own material)
Providing and fixing gauge plate of FRP sheet very sturdy bothsides ,gel coat finish composite material,sand witch with M S strip by contact moulding process, engraved moulded band width and figures with computerised gauge marking with reflective radium pasting, spary lamination with polyurethane chemical for surface protection including material reqd for fixing, nut bolts ,washers, Nylon rope, hanger, drilling machine etc. complete as directed. with all lead and lifts (with Contractor’s own material)
Providing, installing & erecting in correct line and level, fiber glass reinforced plastics(FRP) "V notch" of following sizes and discharge capacities, for accurate measurement of water flowing through open channel with prefabricated fiber glass lining moulded engraved gauge marking ( in lit/sec and in cms) including discharge table, capacity marking, flow direction, sand treatment on the back side of "V" notch, testing, etc. complete(Excluding base preparation i.e. CBL, canal section other concrete etc.) with all lead and lifts (with Contractor’s own material)
Removing wet silt from canal bed with all lead and lifts including depositing the excavated stuff etc completed as directed.(with Contractor’s own material)
Supplying, Installing and Commissioning of Pan Evaporimeter on site as per specifications mention is HIS manual and IS code ( 5973-1970) excluding all taxes etc and complete as directed by Engineer incharge. with all lead and lifts (with Contractor’s own material)
Supplying, Installing and Commissioning of Autographic Rain Gauge Station on site as per specifications mention is HIS manual and IS code ( 5225-1992) excluding all taxes etc and complete as directed by Engineer incharge. with all lead and lifts (with Contractor’s own material)
Supplying, Installing and Commissioning of Autographic Water Level Recorder (AWLR) with complete as directed by Engineer incharge. Assembly on site as per specifications excluding all taxes etc and complete as directed by Engineer incharge.. with all lead and lifts (with Contractor’s own material)
Providing and laying concrete pipes of I.S.NP.class of 300 mm diameter in proper line,level and slope including necessary collars,excavation,laying,fixing with collars in cement mortar1:1 and refilling the trench complete. with all lead and lifts (with Contractor’s own material)
Providing and erecting chain link fencing 1.6 M.height with G.I.chain link of size 50x50 mm,8 gauge thick and fixed 75 mm above ground level on vertical M.S.Angles of 40 x40 x6 mm size,includind excavating pits for foundation and embedded in C.C.block of 1:4:8 mix of size 450x450x670 mm.at 1.75 M.c/c with iron bar 16 mm dia as hold fast including welding link with angle frame at 30cm c/cwith nuts and bolts and horizontal M.S.Angles at top and bottom of 25x25x5 mm size and vertical M.S.flat 35x5mm and 25x5 mm horizontal including cross support of 40x40x6 mm angles both side at every corner or bend embedded in concrete blocks of1:4:8 ofsize 450x450x670 mm including 3 coats of oil painting etc. complete. with all lead and lifts (with Contractor’s own material)
Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x10mm with iron bars at 150 mm C/C and diagonal flats as per the detailed drawing including hinges,pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. with all lead and lifts (with Contractor’s own material)
Road Work
Cleaning grass and removal of rubbish outside the periphery of the area as directed. with all lead and lifts (with Contractor’s own material)
Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. with all lead and lifts (with Contractor’s own material)
Compacting the subgrade/gravel/size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT .including necessary, labour, materials and artificial watering complete. with all lead and lifts (with Contractor’s own material)
Supplying hard murum/ kankar at the road site, including conveying and stacking complete. with all lead and lifts (with Contractor’s own material)
Spreading hard murum/ soft murrum/ gravel or kankar for side width complete. with all lead and lifts (with Contractor’s own material)
Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. with all lead and lifts (with Contractor’s own material)
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means -Grading I (Using Screening Type B (11.2 mm) Aggregate). with all lead and lifts (with Contractor’s own material)
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 mm) Aggregate). with all lead and lifts (with Contractor’s own material)
Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 2 Kilogram/Square Metre, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates) lifts (with Contractor’s own material)
Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates). with all lead and lifts (with Contractor’s own material)
Providing and laying of Type - B premix seal coat with HMP of approprate crushed stone chipping 6.70 mm size and penetration bitumen of specified grade @ 0.68 Kilogram/ Square Metre. , preparing existing road surface including mixing in suitable Batch Mix plant and rolling by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates). with all lead and lifts (with Contractor’s own material)
Providing and fixing metre stones as per I.R.C. standard including fixing in standard size block including curing, painting lettering etc. complete. with all lead and lifts (with Contractor’s own material)
Providing and constructing Information Pillar of Brick Masonry in C.M. 1:6 of size 2.0m x 0.23 m x 1.0 m with base pedestal of size 2.3 m x 0.35 m x 0.45m (0.3m above ground ) , excavtion in ground upto 0.4m , laying 0.15 m thick 80 mm soling , 0.10 m thick c.c. 1:3:6 , finishing the pedestal and pillar in cement plaster 12 mm thick in C.M. 1:5 and finishing the pillar with neat cement finish , applying flat oil paint of approved colour in two coats , including curing , finishing etc complete .(In Strata/Soil__________)Spec.No.:As directed by Engineer-in-charge. with all lead and lifts (with Contractor’s own material)
Fixing chainage Stone/ Benchmark Stone/Center Stone/Apex Stone in earth and all sorts of soil and soft murum including conveying excavated material, fixing stone,including paintaining lettering numbers and back filling etc. complete. with all lead and lifts (with Contractor’s own material)
Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600 mm diameter in proper line,level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. with all lead and lifts (with Contractor’s own material)
Construction of Chawki
Excavation for foundation in Hard murum and boulders in cluding removing the excavated material beyond the building area and stacking and spreading as directed,dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc.complete. with all lead and lifts (with Contractor’s own material)
Providing and laying Cast insitu/Ready Mix cement concrete in M15 of trap/granite/quartzite/gneiss metal for steps including steel centering,formwork,laying/ pumping,compacting, roughening them if special finishis to be provided,finishing uneven and honey combed surface and curing etc.complete.The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface,only.Newly laid concrete shall be covered by gunny bag,plastic,tarpaulin etc.(Wooden centering will not be allowed.),with fully automatic micro process or based PLCwith SCADA enabled reversible DrumType mixer/concreteBatch mix plant(Pan mixer)etc.complete.With fine aggregate (Crushed sand VSI Grade) with all lead and lifts (with Contractor’s own material)
Providing and laying in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.work in foundations like raft,strip foundations, grillage and footings of R.C.C.columns and steel stanchions etc.including bailing out water, Steel centering formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc.complete, withfully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc.complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade) with all lead and lifts (with Contractor’s own material)
Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/granite/ quartzite/ gneiss metal for R.C.C.beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks,laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc.complete.With fine aggregate(Natural Sand/Crushed sand VSI Grade) with all lead and lifts (with Contractor’s own material)
Providing first class Burnt Brick masonry with conventional /I.S. type bricks in cement mortar 1:4 including scaffolding, racking out joints pointing in C.M.1:3 and watering in pillars of rectangular or square shape as shown on the drawing or as directed etc.complete. with all lead and lifts (with Contractor’s own material)
Filling in plinth and floors with approved excavated material in 15 cm.to 20 cm. layers including watering and compacting etc. complete. with all lead and lifts (with Contractor’s own material)
Providing and laying damp proof course 50 mm thick in M 20 cement concrete layer and bitumen/ using cement with water proofing compound curing, formwork etc. complete. with all lead and lifts (with Contractor’s own material)
Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C.columns as per detailed designs and drawing or as directed including steel centering, formwork,coverblocks ,laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCAD Aenabled reversible Drum Type mixer/concrete Batch mix plant (Panmixer) etc.complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade) with all lead and lifts (with Contractor’s own material)
Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finishis to be provided and curing etc.complete,(Excluding reinforcement and structural steel).with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer)etc.complete.With fine aggregate (Natural Sand/ Crushed sand VSI Grade) with all lead and lifts (with Contractor’s own material)
Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C.pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintel spardis, copings,fins,arches etc.as per detailed designs,drawings and schedules.including cutting,bending,hooking the bars,binding with wires or tack welding and supporting as required complete. with all lead and lifts (with Contractor’s own material)
Providing and fixing black kadappa stone as shelves 25 mm.thick machine polished,extending the polish upto 20 cm width on lower side,rounding corners,laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete. with all lead and lifts (with Contractor’s own material)
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces,in all position including scaffolding and curing etc. complete. with all lead and lifts (with Contractor’s own material)
Providing rough cast cement plaster externally in two coats to concrete,brick or stone masonry surfaces in all positions with base coat of 12 to15 mm thick in C.M.1:4 and rough cast treatment 12 mm thick in proportion1:11/2:3 including scaffolding and fourteen days curing complete. with all lead and lifts (with Contractor’s own material)
Providing and laying ceramic tiles having size 30cm.x45cm. confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2cement mortar including joint filling with white /colour cement slurry cleaning curing etc. complete. with all lead and lifts (with Contractor’s own material)
Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group DII-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float,filling joint with white/ colour cement slurry cleaning curing etc. complete. with all lead and lifts (with Contractor’s own material)
Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering,rounding, rebating, iron hold fast of size 300mmx 40mmx 5mm with oil painting, etc. complete. with all lead and lifts (with Contractor’s own material)
Providing and fixing single leaf panelled door shutter without fanlight and shutter 35 mm thick as per drawing consisting of T.W.to prail size100 mmx 35 mm and bottom and lock rail 200 mmx 35 mm insert panel 12 mm thick commercial ply faced T.W.particle board with phenol formaldehyde syntheticres in (Generally confirming to ISI 3097)excluding frame,including stainless steel fixtures fastening and T.W.beading at junction of panels inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. with all lead and lifts (with Contractor’s own material)
Providing and fixing in position (asper1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95x38.10x0.90 mm at weight0.637kg/Rmt. with window frame bottom track section 92x31.75x1.30 mm at weight 1.070kg /Rmt..Top and side track section 92x 31.75x 1.30 mm at weight 0.933 kg/Rmt.The shutter should be of bearing bottom 40x18x1.25 mm at weight 0.417kg/Rmt.Interlocking section 40x18x1.10 mm at weight 0.469kg/Rmt.and handle and top section 40x18x1.25 mm at weigh to.417kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing innylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquitonet shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box. with all lead and lifts (with Contractor’s own material)
Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with hot dip zinc coating including fabricating glazing with plain/ obscured glass pans 5mm thick and approved type quality and iron oxidized fixtures and fastening with guard square bars12mm10 cm c/c and oil painting 2 coats etc. complete. with all lead and lifts (with Contractor’s own material)
Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures,necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. with all lead and lifts (with Contractor’s own material)
Providing and fixing white european type wall-hung,of size 360 mmx 360 mmx 575 mm with flush valve of approved make includings oil pipe,vent pipe up to outside face of wall,100 mm dia C.I.plug bend inlet pipe all fittings,cutting & making good walls,floors etc as directed by Engineer in charge. with all lead and lifts (with Contractor’s own material)
Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32 mm diameter P.V.C. flush pipe with fitting and flushing of approved make and arrangement including leads oil pipe,lead trap & soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge. with all lead and lifts (with Contractor’s own material)
Providing and fixing wall hung white wash basin of size 350 x450 x165 mm with approved make pillar cock, C.P.Angular stop cock long thread approved make continental including SS bottle trap of approved make having necessary pipe connection upto the outside face of the wall etc complete as directed by Engineer in charge. with all lead and lifts (with Contractor’s own material)
Providing and fixing Shower Head with shower arm of approved make shower tube hand shower with divert or of spout including all necessary pipe fittings and connection setc.complete as directed by Engineer in charge. with all lead and lifts (with Contractor’s own material)
Providing and laying cast iron pipes of B class of 80 mm diameter with socket sand spigot ends/flanges and cast centrifugally/ vertically including specials, laying pipes and back filling the trench complete including excavation. with all lead and lifts (with Contractor’s own material)
Providing and fixing 25 mm dia. Screwd own bib/stop tap of brass including necessary socket union nut complete.with all lead and lifts (with Contractor’s own material)
Providing and constructing Brick Masonry Inspection Chamber 90cmx 45cm x90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channel shalf round G.S.W.pipes, Brick Masonry,plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. with all lead and lifts (with Contractor’s own material)
Providing and applying plastic emulsion paint of approved quality,colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete.with all lead and lifts (with Contractor’s own material)
Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil ,grease, dirt and other materials as required,etc. complete. with all lead and lifts (with Contractor’s own material)
Free Standing Table @ 1350 Lx600 Dx750 HT Providing and fixing Table of Size1350 x600 x750mm.Top :made from 25 mm Pre laminated Particle board.All edges are covered by 2mm.Thk.PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs: C Shape made from CRCA Sheet with Powder Coat finish.Modesty panel:Made from 18 mm both side prelaminated particle boards. All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY(WITHOUT MOUSE TRAY):-Metal Powder Coated-Black Color,CPUTROLLEY:-Metal Powder Coated-Black Color, 3D RAWER PEDESTALUNIT having over all size 392Lx 450Dx 680Ht. mm. with central lock and key.Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, with all lead and lifts (with Contractor’s own material)
Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legsin Crome finish and seates in silver powder coating finish. with all lead and lifts (with Contractor’s own material)
Providing and fixing collapsible steel gate in one/two leaves with hot rolled vertical channels of 18x9x3 mm minimum size,crossings of M.S.flats of size18x5 mm Tor Esection for runner of minimum 40x6 mm size for flange, M.S. flat for top runner of minimum size 40x12 mm with roller wheels confirming to grade F.G.150 fitted with snapheaded rivets of minimum size 6 mm max.spacing of vertical channels be100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts,stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). with all lead and lifts (with Contractor’s own material)
Single Bed @ 2025LX 1000DX 650H Providing and fixing Single Bed of Size 2025 Lx1000 Dx 650 H with matress and pillow.Under structure:-The legs are made of Square tube of size 25x25 mm made out of MS with a thickness of 1.2 mm.The legs should have corner brackets welded to it at two levels.The corner brackets are made of 2 mm thick CRCA having a L shaped structure to join the side panels and head board to the leg.Three nos.of Horizontal stiffeners are provided at equal intervals.The stiffeners are made of Square tube of size 25x25 mm made out of MS with a thickness of 1.2mm.The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure.This legis also made of Square tube of size 25x 25mm made out of MS with a thickness of 1.2mm.All Metal components to under go 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. SidePanel:-The side panels are made up of 18 mm thick Pre lam Particle Board with both side decorative laminate.All exposed edges are sealed with 2 mm thick PVC edge Banding.The overall width of the side panel is150 mm.The side panel shave 18 mm thick pre lam particle board Bat on running for required length to add rigidity to the structure.Head Board:-The head board is made up of 18 mm thick Pre lam Particle Board with both side decorative laminate.All exposed edges are sealed with 2mm thick PVC edge Banding.The head board size to be considered as 1000 x 650mm.Foot Board:-The foot board is made up of 18 mm thick Pre lam Particle Board with both side decorative laminate.All exposed edges are sealed with 2 mm thick PVC edge Banding.The head board size to be considered as 1000 x 450 mm.Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. with all lead and lifts (with Contractor’s own material)
Tandulwadi Bandhara Repairs
Excavation in all kinds of soil including boulders upto 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with all lead and lifts (with Contractor’s own material)
Dewatering by pumping out water collected with Diesel or Electrical pumps including cost of all materials, machinery,labour,providing sump and all other ancillary operations whenever necessary etc. complete under specific and in dispensable circumstances with prior approval from competent authority with authentic evidence of records justifying dewatering etc. complete as directed. with all lead and lifts (with Contractor’s own material)
Providing and laying insitu cement concrete of grade M-20 of trap/granite / gneiss/ quartzite/graded metal for RCC works of gallery,sluice,spillway crest,spillway downstream face,energy dissipating structures,intake structures,training walls,piers,abutments,slab etc.with Batching Plant and Transit mixer including centering,shuttering,scaffolding, compacting,curing etc.complete with all lead and lifts (with Contractor’s own material)
providing and laying cement plaster 6 mm thick in cm 1:3 single coat without neru finish to concrete surface in all position including centring,scaffolding,curing etc. complete as directed ( cement 0.057 bags /cum) with all lead and lifts (with Contractor’s own material)
Providing and fixing gauge plate of FRP sheet very sturdy both sides,gelcoat finish composite material,sandwich with MS strip by contact moulding process,engraved moulded band width and figures with computerised gauge marking with reflective radium pasting,spary lamination with polyurethane chemical for surface protection including material reqd for fixing,nut bolts,washers,Nylon rope,hanger,drilling machin eetc. complete as directed. with all lead and lifts (with Contractor’s own material)
PART B – MECHANICAL & ELECTRICAL WORK
Maintenance and Repairs to 1.20 x 1.20 Mtr Roller type Service Gate - 2 No and Emergency Gate - 1 No
Manufacturing and Erection of M. S. Cabin of size 7.2 x 6.00 x 6.5 mtr. fabricated out of ISMB 250, ISMC 250, M. S. Plate 12 mm, 3.15 mm, ISA 100x100x12 mm, alongwith Windows, Grill. Manufacturing and Erection of Extension Platform out of ISMB 250, ISMC 100, Chq. Plate 5 mm alongwith G. I. Pipe 32 mm dia. Completely finished as shown in sketch. Complete job with Material, Sundry material and Labour charges.
Providing 15 MT Capacity Stem Hoist Assembly for 1.2 x 1.2 Mtr Service Gate fabricated out of ISMB 250, ISMC 250, M. S, Platw 20mm, 16 mm, 20 mm, 60 mm alongwith C. I. Worm wheel, EN-9 Worm Shaft, Single Thrust Ball Bearing 51228, Ball Bearing Plummer Block Unit SYJ 50 KF Completely finished as shown in sketch. Complete job with Material, Sundry material and Labour charges
Providing M. S. Ladder 35 Mtr Long outside Well for inspection of Water Level and Maintenance of Gate, fabricated out of ISA 65x65x8 mm, ISMC 100 alongwith G. I. Pipe 32 mm dia. Completely finished as shown in sketch. Complete job with Material, Sundry material and Labour charges
Providing M. S. Entrance Gate to Emergency and Service Gate, fabricated out of ISMB 200, ISMC 100,Sq. Pipe 80x80x5 mm, 50x50x5 mm, Sq. Bar 16 mm. Completely finished as shown in sketch. Complete job with Material, Sundry material and Labour charges.
Transportation and Haulting Charges
Supplying, Erecting and Commissioning of ESE Based Lightening Arrestor Sytem, Earthing to Hoist Motor and Electrical System
Supplying and Erecting ESE Base lightening arrestor suitable from level 1 to level 3 (upto107 m) with provided lightening stroke counter and 4.5 m in length 304SS supporting mast with 25 m GI supporting Guy mast test clamp and round conductor tape clip with necessary material. complete in approved manner.
Supplying and erecting 6 digit transient event counter approved make .
Supplying and Erecting G I Pipe B Grade 150 mm dia for necessary mounting structure G. I mast. (each of 5 mtr with base plate)
Supplying and erecting Brass connector required for discnnection between lightening arrestor and earth pits for earth test complete.
Supplying and erecting disconnector link required to install the lightening arrestor in to the mast with necessary clamps complete.
Supplying , erecting and terminating XLP un armoured cable single core 50sqmm copper conductor erected wth provided lugs laid in provided controll pannel /distribution board /pipe sa per specification no CB-LT/CU.CSR ITEM NO 7-2-3
Supplying and fixing MS Round Base Plate 25 Cm dia meter and 10 mm thick fixee to pole by set screw or welded and fixed position CSR Item No 8-7-16
Supplying and erecting Alluminium Strip of Required size used for earthing on wall and any other purpose with necessary alluminium clamps fixed on walls with insulating and non corrosive bond in an approved manner with joints required . As per specification No EA-EP.CSR ITEM No. 9-2-6
Supplying and Erecting ISI mark G.I. Pipe 50mm dia C Class at position with accessories as per specification no CW-PLB /GP.CSR Item No 16-5-12
Making cement concrete Foundation in 1:2:4 cement concret with foundation bolts and nuts complete.(cost of Wooden box included) CSR Item No 16-3-5
Providing Earthing with Copper Earth plate Size 60x60x0.315cm funnel with a wire mesh for watering and Brick masonry block CI Cover with minimum 25kg of maintenance free earth condictivity enhancing mineral earthing compound complete with all materials, testing and recording the result as per specification no ESE-LACSR ITEM No. 9-1-6
Providing and Back filling earth conductivity enhancing mineral earthing compound of 25 kg bag complete CSR Item No-9-3-2
Supplying ,erecting and terminating XLPE armoured cable 4 core 25sqmm alluminium conductor with contineous 5.48 sq mm (12SWG)G.I earth wire complete erected with glands and lugs on wall /trusses /pole or laid in provided trench/pipe as per specification noCB -LT/ALCSR ITEM No7-1-30
making trench of suitable width and depth in Hard murum /tar road for Laying provided L.T cable of 16 sq mm and above and covered with half round hume pipe complete as per specifiacation no CW-EXN-CTR CSR Item No16-1-3
Making trench of suitable width and depth in Hard murum /tar road for Laying provided L.T cable of 16 sq mm and complete as per specifiacation no CW-EXN-CTR CSR Item No 16-1-2
Providing and Erecting floor /wall mounting MCCB panel Board with door suitable for Fouor pole incoming 250A 8 way 4pole outging up to 100AMCCBs On iron frame as per specification no SW-SWR/MCCB (excluding MCCBS) CSR Item No 5-7-4
Providing and Erecting floor /wall mounting MCCB panel Board with door suitable for Fouor pole incoming 250A 4 way 4pole outging up to 100A MCCBS On iron frame as per specification no SW-SWR/MCCB (excluding MCCBS) CSR Item No 5-7-2
Supplying and erecting three phase smart energy meter DLMS Compliance with 3x240V 50 cycles AC Supply 10-16A ISI Mark Accuracy class 1.0 With back lit LED displey measuring and display VI kw KWh KVA Kvar , md,day,week , month and with communication module confrigurable for GSM /Wifi , IrDA/Bloothooth complete provided panel with calibration certificate from , from manufacturer and duly wired with required size of PC Wire CSR ITM No 6-3-17
Supplying and erecting set of 3 pilot lamps all Bakelite with colour glasses with miniature lamp 230V/250V erected on provided CRCA box with pannel types fuses and connected with PVC wire CSR ITEM NO 6-5-5
Supplying and Erecting LED Strret light fitting suitable for 60w lamp including lamp , with pf>0.95 Class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink extruded allumnium complete as per specification no Fg-ODF/FLS-2CSR ITEM No-2-5-5
Supplying and erecting Steel tubular swaged pole 165.1x139.7x114.3 mm dia with 4.5x4.5x3.65mm thickness (5+2+2M) length respectively and total 9M long with pole cap base plate in provided foundation ( weight 147 kg) as per dpecification no OH -PL/STP CSR ITEM No 8-1-3
Supplying , erecting and terminating XLPE armoured cable Four core 10 sqmm Alluminium conductor erected wth provided lugs laid in provided controll pannel /distribution board /pipe sa per specification no CB-LT/Al.CSR ITEM NO 7-1-28
Supplying and erecting of Street light bracket made from 40mm dia B Class GI Pipe 0.6m in length along with pole cap of 300mm length and 80mm dia duly welded with provided leadas per Specification no FG-BKT/BPC, CSR ITEM NO 2-9-2
Supplying and erecting mains with 2x4 sqmm FRLS Copper pvc insulated wire laid in provided coduct /trunking /inside pole /bus bars or any other places as per specification No .WG-MA/BW.CSR Item No 1-3-6
Providing Pipe type earthing with 40mm dia Gi Pipe or 20MM dia GI rod complete with all material as per Specification No EA-EP.CSR ITEM No 9-1-4
making cement concrete foundation including excavation for poles 60cm x60cmx150 cm deep in 1:3:6 cement concrete ( 20x25mm stone metal)and 45cm x45 cm /x45 cmdia x 45 cm height plinth duly plasterd and with necessry curing and finishing complete ( above 6m to 9m poles ) CSR ITEM NO 16-3-3
Supplying &erecting water tight terminal box of cast iron of size 200x150x150xmm complete on pole as perr specification No CB-SB CSRItem No7-8-5
Supplying , ercting and marking SPMCB 40A B series ( for lighting ) in provided distrubuiton board as per specification no SW-SWR/MCB CSR ITEM No 5-3-1
Supplying, erecting and marking TPN MCB 6 A to 32 A C series ( for lighting in provided distrias per Specification no SW-SWR/MCB CSR Item NO 5-3-18
Supplying, erecting and marking TPN MCB 40A to 63 A C series ( for lighting in provided distrias per Specification no SW-SWR/MCB CSR Item NO 5-3-19
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid