REPAIR/ CLEANING FOR SEWAGE LINE, MANHOLE, SEPTIC TANK AND SOAK WELL AND DRAINS ETC UNDER AGE B/R I AT NEW CANTT PRAYAGRAJ

Amount

Cleaning of chocked sewer lines of 100mm/ 150 mm/ 200 mm/ 300 mm dia of any depth manually or through using mechanical appliance and making sewer line functional complete including working under foul condition and depositing the sludge, rubbish etc. off the premises at an isolated place to a distance exceeding 1.5 Km but not exceeding 2.0 Km distance complete all as specified and directed.

Removing manhole cover & desludging of existing manholes of depth upto 1.5 m filled with sludge by means of manually or through mechanical appliances complete including working under foul condition and depositing and removal of sludge, rubbish etc. off the premises at an isolated place to a distances exc. 1.5 km but not exc. 2.0 Km complete all as specified and directed.

Removing manhole cover & desludging of existing manholes of depth exceeding 1.5 m & not exceeding 3.0 M filled with sludge by means of manually or through mechanical appliances complete including working under foul condition and depositing and removal of sludge, rubbish etc. off the premises at an isolated place to a distances exc. 1.5 km but not exc. 2.0 Km complete all as specified and directed.

Cleaning and desludging of septic tank by pumping out sludge by mechanically through septic tank cleaning truck (The capacity of the truck to be upto 6000 litres & considered as per load ) from existing chocked/ blocked septic tanks including taking out all sediment sand, dirt, ashes, grease, fibres or vegetation, or any other foreign material etc. from any depth and size of septic tanks including removing of sludge, rubbish etc. off the premises at an isolated place to a distance exceeding 1.50 Km but not exceeding 2.0 Km away and buried under ground complete all as directed.

Dewatering of existing soak well of any size by means of manually or through mechanical appliances and discharging waste into nearby drain, including taking out foreign materials etc. complete all as specified and directed.

Cleaning of choked WC in ground floor manually or mechanically upto first man holes and making functional including working under foul condition complete all as specified and directed. Note: The rates quoted are deemed to be included opening of access door and closing etc. as required at site.

All as per Srl item No. 6 above but of WC in other than ground floors

Cleaning of chocked floor traps/nahani trap/gully trap upto first man hole complete all as specified and directed. Note : The quoted rates are deemed to be included of opening of access door and closing properly.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation etc or for shaft, wells, cesspits, manhole, pier holes etc not exceeding 10 sqm on plan and getting out in soft /loose soil complete all as specified and directed.

Removing excavated soil material n.exc 50m and deposited where directed at a level n exc. 1.5m above the starting point all as specified and directed

Returning filling in including spreading,levelling,watering and well ramming of soil in layers not exceeding 25 cm complete all as specified and directed.

Demolition and breaking up existing sewer / drain pipes (SGSW,AC,RCC) of 100 mm to 200 mm bore of any type and in any position set in cement mortar and disposal of waste materials within 50 m all as specified and directed.

M&L for 100 mm dia bore salt glazed stone ware drain pipe grade 'A' conforming to IS 651-1972 laid in trenches and jointed in CM 1:1 complete all as specified and directed.

M&L for 150 mm dia bore salt glazed stone ware drain pipe grade 'A' conforming to IS 651-1972 laid in trenches and jointed in CM 1:1 complete all as specified and directed

M&L for 200 mm dia bore salt glazed stone ware drain pipe grade 'A' conforming to IS 651-1972 laid in trenches and jointed in CM 1:1 complete all as specified and directed.

S&F DWC pipe class- SN8 (double wall corrugated pipe of structured wall polyethelene piping systems) of 100 mm internal dia (with coupler and elastometric rubber sealing ring) with non smooth external annular corrugated and smooth internal surfaces (double wall) for non pressure underground sewerage and drainage application confirming to IS: 16098-2013 including all materials, labour, T&P required for proper completion of work complete all as specified and directed.

S&F DWC pipe class- SN8 (double wall corrugated pipe of structured wall polyethelene piping systems) of 150 mm internal dia (with coupler and elastometric rubber sealing ring) with non smooth external annular corrugated and smooth internal surfaces (double wall) for non pressure underground sewerage and drainage application confirming to IS: 16098-2013 including all materials, labour, T&P required for proper completion of work complete all as specified and directed.

M&L for cement concrete bed to drain pipe 100 mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type D2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for cement concrete bed to drain pipe 150 mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type D2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for cement concrete bed to drain pipe 200 mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type D2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for granular sub base of class-B type bed for laying of DWC pipe including packing under and haunching against the sides of pipes after they are laid & tested with local sand complete all as specified and directed.

Cutting into existing man holes for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branch channel ( 1/2 round or 3'4 section) in cement concrete 1:2:4 type B-1 ( using 20mm graded stone aggregate ) surface smooth finished and reforming benching as required for internal dia of pipe 100mm al as specified and directed

Cutting into existing man holes for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branch channel ( 1/2 round or 3'4 section) in cement concrete 1:2:4 type B-1 ( using 20mm graded stone aggregate ) surface smooth finished and reforming benching as required for internal dia of pipe 150mm al as specified and directed

Cutting into existing man holes for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branch channel ( 1/2 round or 3'4 section) in cement concrete 1:2:4 type B-1 ( using 20mm graded stone aggregate ) surface smooth finished and reforming benching as required for internal dia of pipe 150mm al as specified and directed

M&L for plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in surface channel or surface drain of manholes and drains including forming and finishing with extra cement complete all as specified and directed.

Demolition of concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified & directed.

Demolition of brickwork of any description and in any position built in cement or cement lime mortar including all coin, arches, pillars complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D-2 with using 40 mm graded stone aggregate as in in foundations, filling and mass concrete complete as directed and specified.

M&L for brickwork with fly ash bricks (old size), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed

M&L for brickwork with fly ash bricks (old size), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 complete all as specified and as directed

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick masonry wall or concrete surfaces and mixed with liquid water proofing compound finished even and fair without using extra cement without using extra cement all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick masonry wall or concrete surfaces and finished even and smooth without using extra cement all as specified and directed.

Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete as directed and specified.

M&L plain cement concrete (1:2:4) type B-1, using 20mm graded as in manhole or drain copings and other similar works etc complete as directed and specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete as directed and specified.

Add or deduct for each 25 mm girth or part thereof over or under 30cm complete as directed and specified.

M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in drain or manhole cover slabs and similar work taking down RCC cover slab complete all as specified and directed.

S & F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete as directed and specified.

S & F Mild steel TMT bars 6 to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete as directed and specified.

All as per item no 38 but 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders complete all as specified.

S & F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.

S & F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trenches complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl, 110mm bore complete all as specified and directed.

S & F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed.

S & F in repairs vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts, plastic water closet white. seat cover closed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Supply only liquid water proofing chemical complete all as specified and as directed.

M & L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm, in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified.

S&F for 300 mm bore RCC concrete hume pipes, class NP3, laid and jointed complete with collars including demolition of old pipe complete all as specified and as directed.

S&F including fabrication of framed work such as in grills, grating of drain, etc., with ends of bars shouldered and or riveted or forget into spikes, frames guard bars, and similar work conforming toFe 290 Gde-E-165 with dismantling of old grill etc complete all as specified and as directed.

M&L for chequered cement concrete tiles of glossy finish 300x300x 22 to 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for 75 mm thick PCC flooring (1:2:4) type B1 using 20 mm graded aggregate as in PCC flooring of top finished even and smooth without using extra cement including necessary form work and joint cutting etc complete all as specified and directed.

S & F in repair precast Jallies 35 mm thick in cement concrete 1:2:4 type B0 with using 12.5mm graded aggregate set in CM 1:6 complete as directed and specified.

M&L for 75 mm thick cement concrete 1:3:6 type C1 using 20 mm graded BT stone aggregate in plinth protection finished even and smooth without using extra cement including necessary form work and joint cutting etc complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground as directed and specified.

S&F mild steel angle or FI swan neck ,posts,struts,fixing flat as in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed

S & F Mild steel purpose made bolts with hexagonal head one end and screwed the other exc 5 cm but n. exc 10 cm long and the dia of neck not less than 10 mm to be fitted with washers and one hexagonal nut etc complete all as directed and specified.

S & F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as directed and specified.(each line wire to be measured)

All as per item no 64 as above but except barbed wire.

Dismantling of old chain link fencing including line wire of mesh of any thickness, fixed with steel or RCC post if any complete all as specified & directed.

Supply only galvanised iron chain link fencing including line wires, any mesh, size and type to any standards, rails, straining bolts etc including provision of binding wire complete all as specified & directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wires complete all as specified & directed.

S&F mild steel round bars 10 mm dia and over, cut to length, bent to shape required including cranking as support for fixing of chain link fencing complete all as specified & directed.

S&F in repair framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete .

M & L for preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer with sprayer machine , complete all as specified and directed.

Demolition of reinforced cement concrete including reinforcement cutting as required to facilitate demolition in any description and in any position complete all as specified.

M&L for reinforced cement concrete (Nominal Mix) 1:2:4 type B1 (20 mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.

M&L for reinforced cement concrete (Nominal Mix) 1:2:4 type B1 (20 mm graded aggregate) as in Columns, pillars, piers, posts and struts complete all as specified.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with fair finished surfaces as in flat surface complete all as specified.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surfaces as in square / rectangular column complete all as specified.

M & L for preparation of newly plastered surfaces of walls and applying two coat of cement base paint over a coat of primer with sprayer machine complete all as specified and directed.

M & L for preparation of old painted steel surfaces machine tools/hand grinder with brushes etc exc 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer with sprayer machine, complete all as specified and directed.

M & L for preparation of old plastered surface of walls by scrapping machine tools/ hand grinder with wire brushes etc and applying two coat of cement base paint over a coat of primer with paint sprayers all as specified.

M & L for preparation of old plastered surface of walls by scrapping machine tools/ hand grinder with wire brushes etc and applying one coat of cement base paint with paint sprayers all as specified.

M & L for preparation of old plastered surface of walls by scrapping machine tools/ hand grinder with wire brushes etc and applying two one coat of synthetic enamel paint with paint sprayers all as specified.

M & L uprooting of plants/trees growth on wall/drain pipe and making good surface by cement mortar etc complete all as specified and directed

SK ENTERPRISES

M/S Akhilesh Enterprises

Anupravesh Enterprises

PITAMBARI TRADERS

JAI MAA VINHYAVASANI CONSTRACTION CO

M/S NAGENDRA AND BROS ENTERPRISES