Loading
Loading…
Loading…
Tender Value
₹2.0 Cr
EMD Value
₹4.0 L
Closing Date
16 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TRD
16 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Note: In case, date of tender inviting is on or after date of statutory deadline for audit of balance sheet of previous FY (i.e. 30th Sept or as further extended for this FY), audited balance sheet of 4th previous year shall not be considered unless concerned CA certifies that balance sheet is not audited yet as on date of invitation of this tender.
Contractor/Firm should have Valid Electrical contractor license.
5 conditions · 2 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer shall submit all relevant documents as detailed in para 14 & 18.10 of Tender Form (Second Sheet) of Part I of GCC work-2022.
The tenderer whether sole proprietor / a company or a partnership firm / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. (Para no. 15 of Tender Form (Second Sheet) of Part I of GCC-2022).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Contractor should quote only the above/below percentage on estimated value, in the space provided at web portal for the purpose & nowhere else. Financial & Technical conditions quoted at any place other than prescribed space shall not be entertained while evaluating the offer.
Tenderer are required to go through the documents attached along with the tender and submit their bids accordingly.
Periodic overhauling of ATD and provision of standard termination arrangement in Rewari - Hisar - Bhatinda, Bhiwani - Dobh Bahali, Bhatinda - Suratgarh - Biradhwal & Rewari - Sadulpur section of Bikaner Division.
44-TRD-BKN-ETENDER-25-26
44-TRD-BKN-ETENDER-25-26
Open
Works - General
24 Months
Bikaner, Rajasthan
₹0
₹4.0 L
16 Apr 2026
23 Mar 2026
2 Apr 2026
21 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,01,09,026.9 | ||
| — | 1800.00 | — | — | ||
| Dismantling of ATD from one location and re-erection of another ATD at same location as per specification & explanatory notes (Rates are inclusive of power block charges). | — | — | — | 1,05,11,064 | |
| — | 1800.00 | — | — | ||
| Transportation of released ATD from site to depot and transportation of overhauled ATD from depot to site as per specification & explanatory notes. | — | — | — | 4,11,606 | |
| — | 1800.00 | — | — | ||
| Periodic Overhauling of ATD as per specification & explanatory notes. | — | — | — | 35,61,984 | |
| — | 5400.00 | — | — | ||
| Supply of Ball Bearing for POH of ATD as per specification & explanatory notes. | — | — | — | 11,55,006 | |
| — | 240.00 | — | — | ||
| Supply of Stainless steel wire rope for regulating equipment, 8m long as per specification & explanatory notes. | — | — | — | 5,27,426.4 | |
| — | 120.00 | — | — | ||
| Supply of Stainless steel wire rope for regulating equipment, 10.55m long as per specification & explanatory notes. | — | — | — | 2,99,504.4 | |
| — | 90.00 | — | — | ||
| Supply of Three Pulley Type Regulating Equipment with Modified Pulley Groove (3:1 Ratio) (with use of NBC Ball Bearing 6305 LLU (Part-I) or SKF Ball Bearing 6305-2RS1 (Part-I) or FAG Ball Bearing 6305- 2RSR (Part- II) in Regulating Equipment) consisting of all parts confirming to Specification: TI/SPC/OHE/ATD/0060 Rev.2, Regulating equipment drawing no.: TI/DRG/OHE/ATD/RDSO/ 00001/99/3 Rev. L, Part details drawing no.: TI/DRG/OHE/ATD/ RDSO/00002/99/4 Rev. D, STR: TI/STR/027 Rev.3 or latest. | — | — | — | 8,99,691.3 | |
| — | 2050.00 | — | — | ||
| Supply of 9 Tonne adjuster (Eye and Clevis type) complete assembly as per RDSO Drawing no. ETI/OHE/P/5021 Rev-A (9 Tonne Turn Buckle, ID 5021), ETI/OHE/P/5022 Rev-B (9-Tonne eye bolt left, ID 5022), ETI/OHE/P/5023 Rev-B (9-Tonne eye bolt right, ID 5023), ETI/OHE/P/5024 (9 Tonne clevis bolt (Left), ID 5024), ETI/OHE/P/5025 (9 Tonne clevis bolt (Right), ID 5025) or latest. | — | — | — | 14,75,590 | |
| — | 2050.00 | — | — | ||
| Supply of Catenary wire ending clamp (65) complete with ID Nos. 1121, 1092, 1094 & fasteners as per RDSO Drawing No. ETI/OHE/P/1120 Rev.B or latest and RDSO'S Specification no. TI/SPC/OHE/Fittings/0130(10/13) Rev.1 or latest. | — | — | — | 11,85,310 | |
| — | 2.00 | — | — | ||
| Supply of Fabricated ATD bearing removal puller tool fitted on wooden frame of size 2 feet x 2 feet x 2.5 feet with MS angle screw threaded 18 inch. bolt of dia 40 to 50mm to remove bearings. | — | — | — | 81,844.8 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender Document
ATTACHMENT
TenderDocumentEtenderTRD4425-26.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .