Design, supply, installation, testing and commissioning of Audio-Video systems in Senate hall

Amount

Video System

SITC of Laser projector with following specifications: Brightness – Minimum 5600 Lumens, Minimum Contrast Ratio of 20,00,000:1, Resolution – WUXGA, Pixels – 1920 x 1200, Maximum Input Resolution – 4096 x 2160, Light Source Life – 20,000 to 30,000 Hours, Keystone Adjustment – Automatic / Manual, Connectivity – HDMI, VGA, USB, RJ45 Control – RS232, Miracast, Support to wireless communication, LAN and inclusive of stand, fixtures, cables, connectors and other accessories etc., as necessary. Make: Panasonic/ Sony/ Epson/ Infocus

SITC of 123” (Diagonal) Fiber Glass MW Tubular Motor Screen with RF remote and shall has minimum Aspect Ratio of 16:10 in the existing wall by drilling along with required accessories etc., as required. Make: Epson/ Logic/ AV Vision

SITC of 20x Zoom Full HD PTZ Camera with HDMI Output minimum of 1/2.7 Inch or higher end type MOS with minimum of 2.07 million effective pixels high quality HD CMOS sensor, H265 encoding support, local storage support module, directly recording to local USB flash disc without NVR, High SNR of CMOS sensor combined with 2D and 3D noise reduction algorithm, effectively reduce the noise, even under low illumination conditions, picture can still keep clean and clear inclusive of cable, connectors, stand, fittings and other accessories as required. Make: Canon/ Sony/ Panasonic

SITC of suitable type HDMI Cable for connecting the above said camera including cutting of acoustic panel/wall/wood etc., and refinishing the same as required. (Length: 25 Mtrs) Make: MX/ Microware/ Peapsonic

SITC of USB 3.0 Extension cable for connecting the above said camera including cutting of acoustic panel/wall/wood etc., and refinishing the same as required. (25 Mtrs) Make: MX/ Microware/ Peapsonic

Design & SITC of suitable Smart display monitor of size 55”, Resolution: 4K Ultra HD (3840 x 2160) | Refresh Rate: 60 Hertz | 178 Degree wide viewing angle Wi-Fi, USB, Ethernet, HDMI connectivity along with the suitable 30 Degree angular stand shall be fixed on floor top for accommodating monitor as per the directions of Engineering-In-Charge including cutting of floor and refinishing the same as required along with the cables, connectors and other accessories etc., including floor cutting, cables & raceway laying & refinishing as required. Make: Samsung/Sony/LG/Panasonic

Audio System

Wall Mount Speakers: Design & SITC of 2-way, Minimum of 350 Watts and above PA sound-reinforcement loud speaker, Ultra-Wide sound dispersion, Frequency response of 50Hz to 20kHz (maximum up to -10 dB variation), Sound pressure level (SPL) – 96 dB (full space, 1 Watt @1 m), High Impedance, Nominal dispersion - 70º H x 50º W, Crossover frequency – 2.2 kHz, Powerful 8” long excursion low-frequency driver for powerful bass, a 1” compression driver mounted on an ultra-wise dispersion and inclusive of suitable stand by drilling the wall, fixtures, XLR cables, connectors to complete the job etc., as required The speakers, amplifier and mixer rating shall be designed according to the hall requirement (Note: All the Parameters shall be inline or higher side to the given specifications). Make: Behringer / JBL / Yamaha

Power Amplifier: Design & SITC of 6000 Watts (4*1600 Watts @ 2 Ohms; 2*3000 Watts @ 4 Ohms), 4-Channel, Class-D Power Amplifier, Smart Sense Loud Speaker Impedance Compensation, “Zero-Attack” limiters offer maximum output level with reliable overload protection, Built-In stereo crossover with low-cut, high-cut and full range mode, Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show and is inclusive of laying of cables, connectors, rack, jacks/pins and other accessories etc., and shall be best suited the above said speakers. Make: Behringer / Shure / JBL / Yamaha

24-Channel Analog Mixer: Design & SITC of Premium 24-Input, 4/2 - Bus Mixer with XENYX Mic Preamps and Compressors, USB /Audio interface, Ultra-high quality Klark Teknik FX processor with LCD display, dual-parameters, Tap function and storable user parameter settings, 4 aux sends per channel: 2 pre/post fader switchable for monitoring/FX applications, 2 post fader “Planet Earth” switching power supply for maximum flexibility (100 – 240 V ̴), noise-free audio, superior transient response plus low power consumption for energy saving and shall be best suited to the above amplifier and speakers Make: Behringer / Shure / JBL / Yamaha

SITC of suitable Wireless Handheld Mic: Minimum Number of Channels – 10, Frequency Response – 100 Hz to 15 kHz (+1dB, -3dB) shall be covered, Operating Range – 100 m (300’), typical Microphone Element – Dynamic cardioid Make: Behringer/JBL/Shure/Yamaha /Sennheiser

SITC of suitable Wireless Lapel Mic: Minimum Number of Channels – 10, Frequency Response – 100 Hz to 15 kHz (+1dB, -3dB) shall be covered, Operating Range – 100 m (300’), typical Microphone Element – Dynamic cardioid Make: Behringer/JBL/Shure/Yamaha/ Sennheiser

SITC of suitable Gooseneck Mic with base Element – Fixed-charge back plate, permanently polarized condenser, Polar Pattern – Cardioid, Frequency Response – 100 Hz – 16,000 Hz shall be covered, Open Circuit Sensitivity preferably of -43dB (7.0 mV) re 1V at 1 Pa, Output connector – Integral 3-pin XLRM-type Make: Behringer/JBL/Shure/Yamaha/sennheiser

SITC of suitable Battery Charger for Wireless Mic: NiMH batteries are charged within the transmitters, Built-in safety feature monitors cell voltage and automatically turns off the unit if problems are detected, Automatic shut-off if damaged batteries are installed, Maintenance charging prevents battery self-discharge until the transmitter is removed from charger. Make: Panasonic / Duracell / Bosch

SV Tech Solutions

SILICON RADIO HOUSE

KANNIAPPA ELECTRICALS