Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAccepted-AOC BOOTH NO 119 SECTOR 9 PANCHKULA 134109 HARYANA | PANCHKULA | PANCHKULA | HARYANA | 134109 | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹6.5 L+₹88,613 (15.8%)Rejected-AOC FLAT NO 4 C GH 39 MANSA DEVI COMPLEX SECTOR 05 PANCHKULA 134 109 HRY | PANCHKULA | PANCHKULA | HARYANA | 134109 | L2 | Rejected-AOC Other than the lowest bidder | |
| 3 | L3₹7.2 L+₹1.6 L (28.0%)Rejected-AOC 3838 2ND FLOOR SECTOR 46 C CHANDIGARH UT 160047 | CHANDIGARH | CHANDIGARH | CHANDIGARH | 160047 | L3 | Rejected-AOC Other than the lowest bidder |
Tender Value
₹6 L
EMD Value
₹12,000
Closing Date
10 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE JUTOGH
GE JUTOGH, JUTOGH CANTT SHIMLA (HP) - 171008
REPAIR/ MAINTENANANCE OF LT ELECTRIC SUPPLY NETWORK ALONGWITH CONNECTED ITEMS AT RMS CHAIL UNDER GE JUTOGH
2022_MES_557784_1
GE/JUT-45 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
RMS CHAIL
CLASS E CATEGORY b (i)
7 documents required · 7 mandatory
₹500
GE JUTOGH
₹12,000
Yes
7 Dec 2022
14 Oct 2022
12 Nov 2022
14 Oct 2022
10 Nov 2022
27 Oct 2022
Amount
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in loose/soft soil and getting out for underground cable/erection of poles, stays , trench etc complete all as specified and as directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and as directed.
Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and as directed.
Supply and spreading dry clean sand in trenches for cushioning of cable with layer of sand 8cm before laying and 15cm thick after laying of cable complete all as specified and directed. Note: For payment purpose punned thickness of 18 cm shall be mesured against spread thickness of 23cm.
Supply and laying well brunt bricks sub class ‘B’ of size 23 x 11.5 x 7.5 cm for cable protection laid length wise perpendicular to the axis of the cable,adjacent to each other complete all as specified and directed.
Supply, fixing or laying HDPE (DWC) tubing 100 mm dia as per IS:16205 part 24 fixing on poles, walls under floors, laying on surface etc as reqd at site including clamps to hold pipe at position complete all as specified and directed. Note: All items and accessories, bend, joints, nut bolts, clamps for wall fixing as per site requirement etc are deemed to be included in quoted rates.
Supply, fixing or laying HDPE (DWC) tubing 50 mm dia as per IS:16205 part 24 fixing on poles, walls under floors, laying on surface etc as reqd at site including clamps to hold pipe at position complete all as specified and directed. Note: All items and accessories, bend, joints, nut bolts, clamps for wall fixing as per site requirement etc are deemed to be included in quoted rates.
Disconnecting & taking out defective underground cable any size and any type from trenches, pole, pipe, floor, wall etc complete all as specified and directed.
Supply and laying, connecting and testing XLPE underground cable insulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 400 sqmm single core, laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on wall etc. Note: (i) Earth work, removing, returning filling and pipe will be measured and paid separately. (ii) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways are incl in the quoted rates. (iii) All equipments, machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost.
All as per Ser Item No 09.00 here in before but for 240 Sqmm, 3.5 core complete all as specified and directed.
All as per Ser Item No 09.00 here in before but for 25 Sqmm, 4 core complete all as specified and directed.
All as per Ser Item No 09.00 here in before but for 16 Sqmm, 4 core complete all as specified and directed.
All as per Ser Item No 09.00 here in before but for 6 Sqmm, 4 core complete all as specified and directed.
Supply, installation, testing and commissioning outdoor type doble door cubical LT panel of size not less than 0.6m x 0.4 m x 0.2 m with outer shell made out of 3.15 mm thick MS sheet and inner compartments of 2mm thick MS sheet having MS angle section 25 x 25 x 3mm base frame with not less than 60cm legs on PCC 1:2:4 type B-1 platform 45cm below the ground level, factory fabricated with front openable , lockable, having pad lock arrangement , louvers and air vent, gasket ‘u’ type for natural flow of air, completed dust & vermin proof suitable for 3 phase 4 wire 415 volt 50 Hz factor fabricated (Factory approved from CPRI) having modern fabrication followed by powder coated painting having thickness not less than 100 microns and general construction to IS-8623 of 1993 comprising of the following:-
INCOMING:-
MCCB 40A, 4 Pole, Adj Thermal Fixed Magnetic release, 50 Hz, 415 Volts, 16KA Main- 01 No
OUTGOING:-
MCB 32A, DP, 50 Hz, 240 Volts, 10KA -08 Nos
Indicator lamp RYB with control fuses- 01 set (set of three)
Supply, installation, testing and commissioning outdoor type doble door cubical LT panel of size not less than 0.6m x 0.4 m x 0.2 m with outer shell made out of 3.15 mm thick MS sheet and inner compartments of 2mm thick MS sheet having MS angle section 25 x 25 x 3mm base frame with not less than 60cm legs on PCC 1:2:4 type B-1 platform 45cm below the ground level, factory fabricated with front openable , lockable, having pad lock arrangement , louvers and air vent, gasket ‘u’ type for natural flow of air, completed dust & vermin proof suitable for 3 phase 4 wire 415 volt 50 Hz factor fabricated (Factory approved from CPRI) having modern fabrication followed by powder coated painting having thickness not less than 100 microns and general construction to IS-8623 of 1993 comprising of the following:-
INCOMING:-
MCCB 63A, 4 pole, Adj Thermal Fixed Magnetic release, 50 Hz, 415 Volts, 16KA Main- 01 No
OUTGOING:-
MCB 32A, DP, 50 Hz, 240 Volts, 10KA -09 Nos
Indicator lamp RYB with control fuses- 01 set (set of three)
S&F in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including taking down old unsv any type fiiting complete all as specified and directed.
S&F in repair street light bracket made out of 40mm GI pipe medium gradeof length1.2mtr and bend to shape for fixing of street light fitting including two Nos of FI 50x6mm clamps with suitable nuts and bolts complete all as specified and directed.
S&F KIOSK box weather proof made out of PVC including made out of one piece mounted SMC base and door pole mounted hinged door size 300 x 200 x 105mm inside dimension comprising of aluminum bus bar 4 strips for 3 phase and neutral 63 Amp nd 0.5 Amp MCB for controlling the street light fitting and FI clamps 30 x 4 mm with necessary MS nuts bolts and washer including embossing/ painting of Danger notice of size not less than 10 cm x 7.5 cm with letters, figures and conventional skull and bones in signal red colour on front face of KIOSK box body complete all as spacified and directed.
Supply, installation, commissioning in replacement of Busbar panel outdoor type with locking arrangement MS sheet covering 3.15 mm thick pedestal mounted vermin and weatherproof including four legs of 60 cm long of angle iron 30x30x3mm, front openable door having canopy for protection all surfaces painted with powder coated painting, embedding and including 400 Amp rated aluminium bus bars 4 Nos in vertical position duly drilled for making connection with nut bolts of suitable size with colour code tape complete with PCC 1:3:6 type C1 using 20 mm graded aggregate for foundation for legs and dry 63mm aggregate of 75mm thickness around the panel upto 6 sqft after make good electrical connection Comlete all as specified and directed. Note: The rate are included with thimbles lugs, nut bolts, PCC foundation and aggregate.
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, using galvanised iron strip 32×6mm with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 40 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point, including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed.
S&F in replacement LED driver for 18W to 72W of any light fitting including taking down the unsv complete all as specified and directed.
Servicing of DG Set (Make: Mahindra) of capacity 63 kVA, checking entire system as per manufacturer's catalogue such as checking all parts for serviceability, taking down defective parts such as fuel filter assembly, by pass filter assembly, lube oil filter assembly, air cleaner assembly etc. and replacing the same with same size, make and capacity of parts, Cleaning all the serviceable filters and draining out the old used engine oil from the oil sump , cleaning oil sump and refilling new engine oil of required grade up to required level and including checking of control panel, tightening of loose connections and testing to DG Set to the entire satisfaction of the Engineer-in-Charge. Note: (i) Minor items like nut, bolts, lugs , cloths , cotton etc are incl in quoted rates. (ii) Spare parts/Engine oil / filters shall be measured and paid for separately under successive items here-in-after as supply only. However, labour charge are deemed to be included in quoted rates. (iii) Minimum 6 months gap/200 Hrs of run whichever is earlier shall be considered for next service. (iv) Each service will be measured and paid separately.
Supply only Lubrication Oil filter with seal/ gasket / ring suitable for 63 kVA DG Set (Make: Mahindra) complete all as specified and directed.
Supply only Fuel filter with gasket suitable for 63 kVA DG Set (Make: Mahindra) complete all as specified and directed.
Supply only Air filter inner and outer suitable for 63 kVA DG Set (Make: Mahindra) complete all as specified and directed.
Supply only Fan belt set suitable for 63 kVA DG Set (Make: Mahindra) complete all as specified and directed.
Repair, maintenance and cleaning of radiator of DG set 63 kVA (Make: Mahindra) incl dismenteling and taking down carefully, draining and refixing after repair incl cleaning, repairing , soldering , brazing etc complete all as specified and directed. Note: Coolant will be measured and paid separately as supply only.
Servicing of DG Set (Make: Koel Kirlosker) of capacity 10 kVA, checking entire system as per manufacturer's catalogue such as checking all parts for serviceability, taking down defective parts such as fuel filter assembly, by pass filter assembly, lube oil filter assembly, air cleaner assembly etc and replacing the same with same size, make and capacity of parts, Cleaning all the serviceable filters and draining out the old used engine oil from the oil sump and cleaning oil sump,and refilling new engine oil of required grade up to required level and including checking of control panel, tightening of loose connections and testing to DG Set to the entire satisfaction of the Engineer-in-Charge. Note :(i) Minor items like nut, bolts, lugs , cloths , cotton etc are incl in quoted rates. (ii) Spare parts/Engine oil / filters shall be measured and paid for separately under successive items here-in-after as supply only. However, labour charge are deemed to be included in quoted rates. (iii) Minimum 6 months gap/200 Hrs of run whichever is earlier shall be considered for next service. (iv) Each service will be measured and paid separately.
Supply only Lub Oil filter with gasket suitable for 10 kVA DG Set complete all as specified and directed.
Supply only Fuel filter with gasket suitable for 10 kVA DG Set complete all as specified and directed.
Supply only Air filter inner and outer suitable for 10 kVA DG Set complete all as specified and directed.
Supply only Fan belt set suitable for 10 kVA DG Set of any type any make complete all as specified and directed.
Repair, maintenance and cleaning of radiator of DG set 10 kVA incl dismenteling and taking down carefully, draining and refixing after repair incl cleaning, repairing , soldering , brazing etc complete all as specified and directed. Note: Coolant will be measured and paid separately as supply only.
S&F in replacement of high pressure rubber hose pipe upto length 1.2 mtr and required dia as per sample incl clamp/ nuts and other connecting items suitable for 10 kVA DG Set (Make: Koel Kirlosker) incl dismantling and taking down old unsv complete all as specified and directed. Note: Old parts will be diposited to MES store yard.
S&F in replacement of high pressure rubber hose pipe upto length 1.2 mtr and required dia as per sample incl clamp/ nuts and other connecting items suitable for 63 kVA DG Set (Make: Mahindra) incl dismantling and taking down old unsv complete all as specified and directed. Note: Old parts will be diposited to MES store yard.
Supply and topup New dehydrated Engine/lubrication oil as per required grades suitable for 10 kVA to 63 kVA DG Sets complete all as specified and directed.
Supply and topup Inhibitor corrosion, antifreez / Coolant suitable as per requirement for 10 kVA to 63 kVA DG sets complete all as per directed.
S&F in replacement maintenance free battery 12V, 88 AH, incl dismantling and taking down old unserviceable batteries complete all as specified and directed.
Babu Ram Sud and Sons
naina devi constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .