NIT No. -11/2022-23 15th FC Date 22.11.2022

Amount

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.

Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).

Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) included attached buttresses, string or lacing courses ,….. 1:3:6(1cement:3 coarse sand (zone-III):6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement - All works upto plinth level. 1:1.5:3 (1 cement: 1.5 coarse sand(zone III):3 graded stone concrete 20mm nominal size)

Reinforced cement concrete work in walls(any thickness),including attached pilasters,butteresses,plinth and string courses,fillets,columns,pillars,piers,abutments,posts and struts etc. above plinth level upto floor five level,excluding cost of centering ,shuttering,finishing and reinforcement: 1:1.5:3(1cement:1.5coarse sand(zone-III):3 graded stone aggregate 20 nominal size)

Reinforced cement concrete work in beams,suspended floors,roofs having slope upto 15 landings,balconies,shelves,chajjas,lintels,bands,plain window sills,staircase and spiral staircase above plinth level upto floor five level,excluding the cost of centering ,shuttering,finishing and reinforcement,with 1:1.5:3 (1cement:1.5 coarse sand(zone-III): 3 graded stone aggregate 20mm nominal size

Providing tor steel reinforcement of 10mm,12mm & 16mm bars as per approved design and drawing-do-do-

Providing tor steel reinforcement of 20mm,25mm, 28mm ,32 mm bars as per approved design and drawing-do-do-

Providing designation 75A brick work in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints costs of screening materials, scaffolding, raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I.

Providing Designation 100A 112 mm thick reinforced B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9"x4.5"x3") in cement mortar (1:4) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including the cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing 12mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 and including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 12 mm. cement plaster (1:6) with clean coarse sand F.M. 1.5 including screening,curing with all leads and lifts of water, scafolding taxes and royality all complete as per building specification and direction of E/I.

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specfication and direction of E/l.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. 600 x 600 mm size

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: (b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places. Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately.The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or any other accreditation body which operates in accordance with ISO/ IEC 17011 and accredits labs as per ISO/IEC 17025 1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr 2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml. 3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml 4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm 5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test, Tests to be conducted on site. 6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x 60 cm of mix 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size), every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50 cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, welded steel wire fabric, painting, earth work in excavation and concrete to be paid for separately).

Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately).

Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:

38 mm thick wood block flooring of first class teak wood laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete.

Water proffing for Old new Roof Slab -Providing and Laying water proofing treatment on roof slab by applying two component,Factory designed,ready to use,acrylic modified flexible applied with brush,roller or spray for water proofing coating as per manufatire specification....do.....

Distling R.C.C work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete as per dirction of E/I

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:15.28.2 Asbestos Cement sheet

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :15.12.2 Of area beyond 3 sq. metres

Distling pucca brick or lime work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete as per dirction of E/I

Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately).

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes

Steel work welded in built up sections/framed work,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings,frames,guard bar , ladder, railings , brackets , gates and similar work.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering royalty and taxes all complete as per building specification and direction of E/I

Providing designation 75B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints costs of screening materials, scaffolding, raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete specified grade of cement concrete excluding the cost of centering shuttering finishing and reinforcement - All works upto plinth level. 1:2:4 (1 cement: 2 coarse sand(zone III):4 graded stone concret

Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing 12 mm thick cement plaster (1:3) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 1.5 mm. cement punning including curing,carriage of water with all leads and lifts as per building specification and direction of E/I.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) included attached buttresses, string or lacing courses ,….. 1:2:4(1cement:2 coarse sand (zone-III):4 graded stone aggregate 20 mm nominal size)

Providing R.C.C. M - 20 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.

Providing 50 mm thick cement concrete flooring (1:2:4) with 20 mm to 6mm size graded stone chips finished with floating coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/l

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

18ft. SEQUENCING FOUNTAIN

LG./PANASONIC/LIOYD/GODREJ/WHIRLPOOL/ AMAZONBASICS/BLUE STAR/VOLTAS/CORMA OR EQUIVALENTCapacity-79.2 litres.Item Dimensions LxWxH-61.5X62.5X84.5 Centimeters,Voltage-230 Volts,Item Weight-39 kg ,Material-Steel

LG./PANASONIC/SUMSUNG/WHIRLPOOL/ AMAZONBASICS/DELL/PHILIPS OR EQUIVALENT Screen Size-24 Inches.Item Dimensions LxWxH-54.6 x 40.4 x 19.3 Centimeters,Voltage-230 Volts,Wattage-32.2 Watts,Item Weight-3 kg 360g,Material-Plastic

Amazon Brand /Deck up/Wakefit- Solimo Medusa Engineered Wood Wardrobe with Mirror Wenge , 2 Doors,Load Capacity-45 Kilograms Item Dimensions LxWxH-75 x 45 x 183 Centimeters ,Item Weight-56 kg,Material-Engineered Wood

DeckUp Siena /BLUEWUD Osnale /Credible Bazar Antique /TreeWud Premium Engineered Wood Centre Table (Wenge, Matte Finish)-Item Dimensions LxWxH-15.7 x 35.4 x 14.6 Centimeters,Item Weight-18 kg, Size-Standard

Diya/Livworth/ Detech/Padam shree Seating Solutions Beeta Cushion with Arm Chair (Size : 850mm X 520mm X 480mm) (Plastic, Brown)-Item Dimensions LxWxH-48 x 52 x 87 Centimeters,Item Weight-2 kg, Size-850mmX520mmX480mm

OSEAS AQUA FRESH/Konvio Neer AquaPious PLATINUM WATER PURIFIER FILTER | 15 Litre RO + UF+PF+ ACTIVE COPPER ALKALINE Adjuster Water Purifier.Item Dimensions LxWxH-9 x 9 x 9 Centimeters,Capacity: 15 liters tank, Power: 230 watts ; Input Water Temperature: 10 - 40°C and Operating Input Voltage: 150 V - 270 V AC/50 Hz, Material Tank Type- Food Grade Plastic, Compact & Reliable design to treat Multiple Sources of Water: (Tanker / Borewell / Tap),80.00 litres_per_day,

Queen Size bed: Dimensions: H 34 x W 61x D 84; Capacity: 2 (all dimensions in inches) Design: Alfredo Weight: 48 KG Warranty: 12 Months' Warranty Assembly: Carpenter Assembly; Material: Engineered wood;Bed material-sub type: Particle Board

SOFA: Dimensions: H 34 x W 75 x D 32.5; Seating Height-17 ; Seating Depth : 21 Capacity: % seater (all dimensions in inches) Design: Alfredo Weight: 48 KG Warranty: 36 Months' Warranty Assembly: Carpenter Assembly Primary Material: Fabric Collection: Alfredo Seating Height: 17

Wardrobe: Dimensions: H 72 x W 29 ; No of Doors-2,No of shelves (all dimensions in inches) Design: Alfredo Weight: 49 KG Warranty: 12 Months limited domestic brands warrenty' Material:Engineered wood

CENTRE TABLE: Dimensions: H 12 x W 36 x D 24 (all dimensions in inches) Warranty: 6 Months' Warranty Assembly: No Assembly Required Primary Material: Engineered Wood Top Material: Engineered Wood

DINNING TABLE: Dimensions: H 16 x W 39 x D 39 (all dimensions in inches) Warranty: 1 YEAR,Capacity: 4 seater, Warranty Assembly: No Assembly Required,Chair frame Material:Metal, Table Top Material: Glass

DURIAN/FEATHERLITE/DAMRO/GORDREJ OR EQUIVALENT PUSH BACK CHAIR With ARM knee tilt synchronic Dimensions: H 98 x W 55 x L 57; Seating Height-48-58 (All Dimensions in cm) Weight: 18 KG Warranty: 12 Months' Warranty NOS Assembly: Carpenter Assembly Primary Material: Breathable Mesh Room Type: Theater Furniture Seating Height: 48-58 Arm Type: Adjustable Arm

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B Fixing with adjustable lugs with split end tail to each jamb

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer

Providing designation 75 A brick work in C.M. (1:4) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing designation 75 A brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing designation 125mm thick reinforced designation 75 A brick work in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.

Supplying, fitting and fixing fully glazed steel door, windows or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100x16x3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10x10 cm size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/l.

Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.

Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Ruled / Flush pointing on Red sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime: 1.5 surkhi (50% red and 50% light yellow surkhi ) : 1/2 marble dust}. (The rate is inclusive of all materials & labours involved except scaffolding).

Ruled/ Flush pointing on White sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2 marble dust}. (The rate is inclusive of all materials & labours involved except scaffolding).

Applying two or more coat of Ethyl Silicate chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with brush or spray on the existing stone masonry surface till there is no further absorption of chemical by stone surface, including protecting the applied surface from direct sunlight by suitable means during application, all complete as per direction of the Engineer-in-Charge (The rate is inclusive of all materials & labours involved except scaffolding).

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin-

Supplying, assembling, lowering and fixing in vertical position in borewell, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,

Point Wrining in pvc conduit with modular type switch Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular type switch, modular plate, suitable size GI. box etc as required Group c

Twin control point wiring in pvc conduit with modular type switch Wiring for twin control light point with 1.5 sq.mm fr pvc insulated copper conductor single core cable in surface /recessed PVC conduit ,2 way modular type ,suitable size of CI box as required

Supply and fixing light plug point with Modular type accessories Supply and fixing light plug point with Modular type accessories supply and fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin ,5/6 amps modular socket outlet and 5/6 amps modular type switch ,connection,painting etc as required

Supply and fixing light plug point with Modular type accessories Supplying and fixing suitable size GI box with modular plate and cover in Front on surface or in recess ,including providing and fixing 6 pin 15 / 16 modular socket outlet and 15 / 16 amps modular switch,connection,painting etc.as required.

Circuit /sub-main wiring in PVC conduit Wiring for circuit /sub-main wiring along with earth wire with the following sizes of PVC insulated ,copper conductor,single core cable in surface/recessed PVC conduit as required 2x1.5 sqmm+1x1.5 sqmm earth

2x2.5 sqmm+1x2.5 sqmm earth

2x6 sqmm+1x6 sqmm earth

4x6 sqmm+2x6 sqmm earth

4x10 sqmm+2x6 sqmm earth

ceiling fan 56"(1400 mm)

12"(300mm) metal exhaust fan

ITC Ceiling Fan:- Installation,testing and commissioning of ceiling fan including wiring the down rods of standard length ( up to 30 cm ) with 1.5 sq.mm FRPVC insulated,copper condictor ,single core cable etc as required

ITC Exhaust Fan /wall fan upto 450 mm sweep Installation of exhaust fan /wall fan upto 450 mm sweep in the existing opening ,including making the hole to cut the size of the above fan ,making good the damage,including connection,testing,commissioning etc as required

providing and fixing 25mmx5mm GI earth strip in pipe Providing and fixing 25 mm X 5 mm GI strip for fixing in GI pipe from earth from earth electrode as required

GI earth pipe electrode for lighting conductor Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc as required with out charcoal and salt as required

Earthing with copper earth plate 600mmx600mmx3mm thick including acessories and providing masanary enclosure with cover plate having locking arrangement and watering pipe etc.(but without charcoal or coack and salt)complete etc as required

Recess mounted LED round down light (18/20W)

Recess mounted LED round down light (12W)

Silent type D.G set of capacity 100 KVA with AMF Panel IS/IEC 60034-1 IS:A160 IS:13018 Add 10% CP + 5% OH

WIPRO GARNET/VITHAMAS BANIX/NARANG VEILUX/XERGY/ERROL OR EQUIVALENT 10mtr. LED STRIP LIGHT WITH SURGE PROTECTION ,FLEXIBLE FOR OUTDOOR Item Dimensions LxWxH-10 x 0.01 x 0.01 Meters,Voltage-230 Volts,Item Weight-955 g,Material-Plastic

APEX LED/AL-QUARISH/SANLITES/DS-LEDSIGN- Moving/Scrolling Messenger Advertising Display Board with WiFi Operated Ultra Bright Indoor/Outdoor (Red, 40"X15"),Item Weight-10 kg

LG./PANASONIC/LIOYD/GODREJ/WHIRLPOOL/ AMAZONBASICS/BLUE STAR/VOLTAS/CORMA OR EQUIVALENT 1 TON COVER AREA-150 sqft.Item Dimensions LxWxH-80 x 23 x 29.5 Centimeters,Voltage-230 Volts,Wattage-1110 Watts,Item Weight-9 kg 300 g kg,Material-Plastic

LG./PANASONIC/LIOYD/GODREJ/WHIRLPOOL/ AMAZONBASICS/BLUE STAR/VOLTAS/CORMA OR EQUIVALENT 1.5 TON COVER AREA-150 sqft.Item Dimensions LxWxH-87 x 20.4 x 29 Centimeters,Voltage-230 Volts,Wattage-1770 Watts,Item Weight-35 kg,Material-Plastic

LG./PANASONIC/LIOYD/GODREJ/WHIRLPOOL/ AMAZONBASICS/BLUE STAR/VOLTAS/CORMA OR EQUIVALENT 2 TON COVER AREA-240 sqft.Item Dimensions LxWxH-107 x 23.5 x 29 Centimeters ,Voltage-230 Volts,Wattage-1740 Watts,Item Weight-42 kg,Material-Plastic

Earth work is excavation ( as per I.S. 3114/1965 for laying of different types and sizes of pipe so as to give 1m av, cover over the socket of pipe with disposal of excavated earth wirthin intial lead and lift as per specification and direction of E/I.

Earth work in back filling the trenches after laying different types and size of pipes with earth removed dufing excavation within intial lead and lift as per specification and direction of E/I. ( For classification of soil item- A&B)

Supplying material and labour and construction inspection chamber all complete as per specification and direction of E/I

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

Providing fixing male ended 15 mm dia brass bib cock of approved quality all complete as per specification and direction of E/I 15 mm dia

Providing and fixing 15 mm size C.P brass pillar cock of approved quality all complete as per specification and direction of E/I (b) C.I body brass spindle

Supplying fitting and fixing G.I fitting of approved quality all complete as per specification and direction of E/I (A) Elbow (a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

(d) 40 mm dia

(B) Tee Plain (a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

(d) 40 mm dia

© Reducing Sockets (a) 20 mm dia

(b) 25 mm dia

(c) 40 mm dia

(D) Nipple (a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

(d) 40 mm dia

( E ) Plug (a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

(d) 40 mm dia

(F) Reducing Tee Plain (a) 20 mm dia

(b) 25 mm dia

(c) 40 mm dia

(G) Union Socket (a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

(d) 40 mm dia

Providing and fixing gun metal full way valve of approved quality all complete as per specification and direction of E/I (a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

(d) 40 mm dia

Supplying fitting and fixing vitreous white glazed ware I.W.C of parry hindustan or any other I.S.S approved all complete as per specification and direction of E/I 580 mm long with 12.5 litres low level PVC cistern

Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or hindustan or any other I.S.S approved all complete as per specification and direction of E/I

Supplying fitting and fixing H.C.I pipe with ear of approved make all complete as per specification and direction of E/I (a) 100 mm dia

(b) 75 mm dia

Supplying fitting and fixing H.C.I pipe fitting of approved make all complete as per specification and direction of E/I (A) H.C.I single junction with door but without ear except socket (a) 100 mm dia

(b)80 mm dia

(B) H.C.I Heat Rest Bend (i) 100 mm dia

(ii) 80 mm dia

( G ) HCI bend with door & ear (i) 100 mm dia

(ii) 80 mm dia

(K)Norton Patent HCL Cowl (i) 100 mm dia

(ii) 80 mm dia

( J ) Floor trap with grattings (i) 100 mm dia

Supplying all tools and labour and cutting of chajja or cronice for laying HCI pipe of approved make all complete as per specification and direction of E/I

Making Holes in walls for laying H.C.I pipe all complete as peer specification and direction of E/I (i) 125 mm dia

(ii) 250 mm dia

Supplying material and labour for painting the exposed H.C.I pipe all complete as per specification and direction of E/I (c) 100 mm dia

(b) 80 mm dia

Supplying fitting and fixing polythene water storage tank of approved quality

Supplying fitting and fixing flat back or angular,lipped front vitreous white glazed earthen ware urinal all complete job (a) Flat back or standing corner (600 mm x 350 mm)

CEMENT(19Km)

SAND(26Km radius)

COARSE AGGREGATE (65Km radius)

STEEL(19Km radius)

BRICKS(22Km radius)

ADD GST @18%

ADD LABOUR CESS @1%

M/S SRI RAM ENTERPRISES