REPAIR / MAINT TO CERTAIN ROAD INCLUDING ROAD FURNITURE AT CERTAIN AREA UNDER GE KAMPTEE.

Amount

Repair to potholes any depth, n. exc. 1 sqm each including sweeping, with mechanical equipment, and making the surface free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc.. by using pressure air, cutting around edges to atleast 25 mm in depth making good by applying tack coat at 5 kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 Sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc. 30 mm using paving bitumen, complete all as specified and as directed.

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with mechanical equipment, to remove all loose dirt etc. complete all as specified and as directed.

Material and Labour Applying evenly a priming/tack coat with bituminous primer over black top surface at 5 kg per 10 sqm using paving bitumen grade VG-30 on blacktop surface using mechanical sprayer, complete all as specified and directed. Note: The work shall be executed by using hot mix plant & mechanical paver. No extra payment will be given for filler Material.

Material and labour for premix asphaltic semi-dense concrete 30mm consolidated thickness with 5.5% binder content (paving bitumen any penetration of grade VG-30) by weight of total mix and 2 % cement filler, rolled and compacted to required camber and gradient , using 8 to 10 tonne power roller complete all as specified ans directed.

Material and labour for premixed bituminous macadam (consolidated thickness 75mm or less) using with 4% binder content (paving bitumen any penetration of Grade VG-30) by weight of total mix and 1.5 % cement filler, mixed in hot mixed plant and laid by using mechanical paver and rolled and compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and as directed.

Material and labour for Preparation of road surface and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width using 'HOT MARK' thermoplastic modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers thermoplastic requirement for glass beads shall be the Table No 800.4 of MORTH specification including spraying of glass beads etc. all as per manufacture instructions and as specified and directed.

Fixing only aluminium road studs of any size and description, complete all as specified and directed.

Fixing only regular delineators of any size and description including with necessary exc.avation in any type of soil, and embedded in PCC 1:2:4 (using 12.5 to 20mm graded stone aggregate) complete all as specified and directed.

Fixing only convex mirror of any size and description including with necessary exc.avation in any type of soil, PCC 1:2:4 (using 12.5 to 20mm graded stone aggregate) filling of size 45X45X50 cm shall be deemed included , complete all as specified and directed.

Fixing only solar studs of any size and description, complete all as specified and directed. Note for item Sr.No 7.00 & 10.00 :- These items will be issued under Sch 'B' free for fixing only.

Supply and fixing retro reflective boards in shape of rectangle of size 1.0m X 1.40 m made out of 2 mm thick stainless steel both side bounded/ pested with high prismatic (iv) sheet manufactured by " Avery Dennison" or 3M with desired letters/ logos/ designed as directed. the board shall be supplied with and including stainless steel frame made out of 25 mm dia pipe in frame around duly welded with and including stainless steel sheet and stainless steel posts of 38 mm dia and full length of 2.20 m one side and 2.8 m other side complete all as specified and directed. Note: Rate for fixing of boards with PCC 1:2:4 type B-2 filling of size 45 X 45 X 60 cm to be incl in unit rate.

M/s Jagdish Staioners and General Stores

Bidder Name

M/s Jagdish Staioners and General Stores

M/s SHREE SAIBABA CONSTRUCTION