HIDCO/AGM-III/NIT-33/25-26

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer- incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957,haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour Insurance charges etc. Payment to.be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. I) For structural members of specified sections weighing less than 22.5 Kg./m

Drilling holes of requisite diameter in R.S. joists channels, tees. Plates etc. (b) (I) Dia.above 12mm and depth upto 10 mm.

(ii) Extra for drilling beyond depth of 10mm

Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. (i) 16 mm dia bolt (b) 450 mm long

(b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering, etc.

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: (b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete In all respect as per design including cost of all labour and materials.

Multi colour Super quality flex print. Flex fitting & fixing complete in all respect

Supply fitting fixing in all respect 200 watt LED Flood light 6K (Clair Make)

10 AMP MCB Box (Havells)

2.5 sq.mm 2 core Copper Flex Cable

4 sq.mm 3 core Copper Flex Cable

Add CGST @9% of total amount to Rs.15,13,816.17

Add SGST @9% of total amount to Rs.15,13,816.17

Add Construction Cess @1% of total amount to Rs.15,13,816.17

Please Enable Macros to View BoQ information