Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station along with construction of associated 220kV transmission line for a distance of 0.805Km, and 66kV Lines for a distance of 46.968Km and laying of 66kV UG Cable for a distance of 1.6Km in Tumakuru taluk & district.

Karnataka Power Transmission Corporation Limited

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

TECHNO - COMMERCIAL SHEETS

NOTE* For detailed scope of the work please refer Bid Documents.

BIDDERS TO READ CAREFULLY

THE FOLLOWING DOCUMENTS [DULY SIGNED BY AUTHORISED PERSON, WHEREVER NECESSARY] ARE TO BE UPLOADED AND BANK GUARANTEE/INSURANCE SURETY BOND TOWARDS EMD OVER AND ABOVE RS.1.00LAKH AS PER ANNEXURE-II OF THE BID DOCUMENT SHALL BE SENT IN ORIGINAL TO CHIEF ENGINEER ELECTY., (T&P), KPTCL, BENGALURU SO AS TO REACH THIS OFFICE AFTER THE LAST DATE OF SUBMISSION OF BID AND ON OR BEFORE THE DATE & TIME NOTIFIED FOR OPENING OF TECHNO COMMERCIAL BIDS, FAILING WHICH THE BID WILL NOT BE OPENED. 1) NO DEVIATION CERTIFICATE (SCHEDULE-16). 2) EMD/BID SECURITY AS DETAILED IN CLAUSE NO. 13 of ITT. 3) BANK GUARANTEE issued either by a Nationalized/Scheduled Bank OR INSURANCE SURETY BOND issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India (IRDA) TOWARDS BALANCE EMD/BID SECURITY. (For the balance EMD above Rs. 1.00Lakh) (SCHEDULE-17) - as detailed in Clause No. 13 of ITT-The Bidder shall scan the Bank Guarantee/INSURANCE SURETY BOND towards EMD and upload the same in the prescribed format in the slot specified for “EMD and Tender Fee Payments” in the e-procurement portal to enable the owner for verification of EMD BG/ISB at the time of opening of Techno Commercial Bid, failing which the offer will be rejected. 4) LETTER OF UNDERTAKING (SCHEDULE-18). 5) CONSORTIUM AGREEMENT (IF APPLICABLE-SCHEDULE-19) 6) POWER OF ATTORNEY (SCHEDULE- 20). 7) ANY OTHER AGREEMENTS /UNDERTAKINGS/SELF DECLARATIONS SPECIFIED IN THE TENDER.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

BID PROPOSAL SHEET

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Bidder's Name & Address alongwith GSTIN no. :

Bid Proposal Reference :

Person to be contacted :

E-Mail Address:

The Chief Engineer, Electricity,

Tendering & Procurement, KPTCL,

9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

a) * We have submitted bid as individual Bidder. (Indicate Name of the Individual Bidder)

b) * We have submitted bid in Consortium with the following Bidders. (Key in Consortium)

Name of the Consortium Partner Scope / Participation of each Consortium Partner

(* Fill-up whichever is applicable)

1 We, the undersigned Bidder, having read and examined in detail the specifications and all the Bidding documents of the said work and hereby propose to design, manufacture/fabricate, shop test, supply on FOR site basis, and carry out the erection, testing and commissioning including civil, structural and architectural works for

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

2 PRICES AND VALIDITY :

2.1 We declare that the Prices stated in our Proposal are in accordance with subject Bid Documents (including Clause No.40 of "Conditions of Contract (CC)" & Clause No.12 of Instruction to Tenderers (ITT) of Bid Documents. We further declare that all Ex-works price/CIF components of Spares, Maintenance and Testing Equipments and other charges viz., Freight and Insurance, Type Test charges and other charges stated in our proposal shall be as per the Tender conditions. All the Price and other terms and conditions of this Proposal are valid during the Performance of the Contract.

2.2 All Duties, such as Custom Duties on imports, Levies, Surcharge/Cess etc., if any applicable on the transaction excluding GST are included in the Bid Price and shall be to Our account and the Owner is not having any liability whatsoever on this account, whatever may be the contrary elsewhere in the Bid documents. However the component of Duties included in the Bid Price are separately indicated in Schedule - 2 for TDS purpose. We further confirm that our Bid Prices as quoted in Schedule-I, include all import Duties and levies including Licence fees lawfully payable by us on imported items and all other Duties and Levies applicable on Bought-out Components, Materials, Equipment and other items and confirm that any such Duties and Levies additionally payable shall be to our account. We further confirm that, no Sales Tax in any form shall be payable by Owner either for Bought-out items which are despatched by our Sub-Suppliers directly to the Project Site or for items Supplied directly by us. We confirm that, the Prices quoted by us are excluding GST.

2.3 We declare that we have noted and considered Clause No.39 of Conditions of Contract (CC ), Clause No. 11.11 of Instruction to Tenderers(ITT) of Bid Documents regarding Taxes and Duties and quoted our Prices accordingly. We further agree for TDS as per Statutory stipulations.

2.4 The Bid Prices, the Price components of the various items in our Scope of Supply, Erection including Testing & Commisisoning, Civil and Mandatory spares is quoted in Percentage wise Financial Bid in KPP Portal for this proposal..

3 CONSTRUCTION OF THE CONTRACT : We, declare that we are making the Offer on the basis of Single Contract for the entire Scope of the Package in accordance with Clause No.26.2 of Instruction to Tenderers (ITT) of Bid Document.

4 We having studied Clause No.39 of Conditions of Contract (CC ), Clause No. 11.11 of Instruction to Tenderers(ITT) of Bid Documents , relating to Tax and we hereby, declare that if any income-tax, surcharge on income tax or any other corporate tax is attracted under the law, we agree to pay the same.

5 Bid Security/ EMD : We have enclosed a Bid Security through e-Payment mode for a sum of Rs.1.00Lakhs and remaining amount of Rs..........Lakhs ( above Rs.1.00 Lakhs) in the form of Insurance Surety Bond (ISB) issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India (IRDA) OR in the form of Bank Guarantee in original valid for a period of 225 days from last date of bid submission and liable to be forfeited in accordance with Bid Documents. (Mode of Payment towards EMD is as detailed in CLAUSE NO. 13 of ITT & Clause No. 5 of NIT)

We have also ensured that the above Bid Guarantee furnished by us is in line with the Bid Documents and complete in respect of following :

1. Value of Non judicial Stamp Paper purchased in the name of executing Bank is as per Stamp Act.

2. Power of Attorney Number and Date as well as Signature and Full Name and Designation of Executant along with Bank's Stamp are there.

3. Signature, Full Name, Designation and address of Witness are there.

4. Completed Mailing address of the Head Office of the Bank is indicated.

6.1 We declare that the Works shall be performed strictly in accordance with the Specifications and Documents except for the variations and Deviations, all of which have been detailed out exhaustively in the following Schedules, irrespective of whatever has been stated to the contrary anywhere else in our Proposal.

a Commercial Deviations Schedule Schedule - 5

b Technical Deviations Schedule Schedule - 6

6.2 We further confirm that Specified Stipulation of following Clauses are acceptable to us and No Deviation / Exceptions are taken on any account whatsoever in the following Clauses.

a. Terms of payment Clause No. 37 of Section-5,Conditions of Contract (CC) and Clause No.8 of Special Conditions of Contrac (SCC)

b. EMD/Bid Security Clause No. 6, Section :1, Invitation for Tenders (IFT) and Clause No. 13, Section :2, Instruction to Tenderer (ITT)

c. Contract Performance Guarantee Clause No. 29 of Section:2, Instruction to Tenderers (ITT).

d. Penalty for delay Clause No. 41 of Section-5 : Conditions of Contract (CC).

e. Price Basis/ Price adjustment Clause No. 40 of Section-5 :Conditions of Contract (CC).

f. Defects Liability Period/Guarantee Clause No. 10 of Section-5 Special Conditions of Contract (SCC)

g. Work Schedule Clause No.17 of Section:5 Conditions of Contract (CC)

h. Taxes and Duties Clause No. 11.11 of Section-2: Instruction to Tenderers (ITT).

Further, we agree that additional conditions, if any, found in the Proposal Documents other than those stated in Deviation Schedules, save that pertaining to any rebates offered, shall not be given effect to.

7 PERFORMANCE GUARANTEE ; We declare that the ratings and performance figures of the equipment to be supplied and erected by us are guaranteed. The Guaranteed particulas of different equiment in our Scope are enclosed in Data Requirement Sheets.

8 BID PRICING : We further, declare that the Prices stated in our Proposal are in accordance with your ITT & SCC & all other relevant clauses of Bid Documents.

9 PRICE ADJUSTMENT : We declare that the Prices quoted by us are in accordance Clause No. 40 of Section-5 :Conditions of Contract (CC)

10 SPECIAL TOOLS AND TACKLES : We have given a list of Special Tools and Tackles in Schedule - 7 and Prices thereof are included in our lumpsum Bid Price. We further agree that any items of Special Tools and Tackles, though not included in the aforesaid list, but required for effective Erection, Testing, Commissioning & Operation of the Equipments of Substations & Transmission lines shall also be furnished by us, at no extra cost to you.

11 ADDITIONAL INFORMATION : In addition to the information called for in these Proposal Sheets, we have included with this Proposal, additional information as listed in Schedule - 8. We further confirm that such additional information does not imply any additional deviation beyond those covered in Schedule - 5 & 6 and in case of any contraction between these additional information and other provisions of Bid, the later will prevail.

12 QUALIFICATION DATA : We confirm having submitted the Qualification Data, as required by you in your Bid Documents in e-Procurement Portal along with this Proposal. Further we have filled in the information for Qualification Requirements in Schedule 9. In case you require any further information in this regard, We agree to furnish the same in time.

13 WORK SCHEDULE : If this Proposal is accepted by you, we agree to submit Engineering Data, Provide Services and complete the entire Work from time to time, in accordance with Schedules indicated in the Proposal. We fully understand that the Time Schedule stipulated in this Proposal is the essence of the Contract, if awarded. The completion schedule of the various Major Key Phases of the Work is indicated in Schedule - 11.

14 CONTRACT PERFORMANCE GUARANTEE ; We further agree that if our Proposal is accepted, we shall provide an irrecoverable Contract Performance Guarantee, of value equivalent to Five percent (5%) of the Amount Put to Tender (Excluding GST) plus additional security for unbalanced tenders in accordance with Clause 29 of Instructions To Tenderers (ITT) of the tender valid up to the end of ninety (90) days after the end of the Contract Guarantee Period mandatorily in the form of Insurance Surety Bonds (ISBs) issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India (IRDA) (OR) in the form of electronic Bank Guarantee (e-BG) from the Banks which are integrated with NeSL in the form attached as Annexure-III (Section 4: Formats of Annexures) in your favour in accordance with Clause 25.5 of ITT and Clause 43 of the CC (Conditions of Contract), as per the format given in Section 4 and enter into a formal agreement with you within Twenty (20) days from the date of issue of Letter of Intent to Award the Contract.

15 We, the partners of the Consortium whose Signatures are appended below, shall be liable jointly and severally for the execution of the Contract(s), in the event of Award, in accordance with the terms of Contract(s). The Lead Partner for this Bid - M/s .................................................................................... on behalf of the Consortium, is submitting the Bid. The Power of Attorney in favour of M/s .......................................................................................is enclosed.

16 BID PRICE : We declare that our lumpsum Price for the entire scope of work specified in the specifications and documents, shall be as indicated in Schedule - 1.

17 CHECK LIST : We have included a Checklist duly filled in Schedule 22

18 We, hereby, declare that only the Persons or Firms interested in this Proposal are named herein as Principals and that no other Persons are interested in the Proposal or in the Contract to be entered into, if we are awarded the Contract, and that this proposal is made without any connection with any other Person, Firm or Party likewise submitting a Proposal and that this Proposal is in all respect for and in good faith, without collusion or fraud.

19 We declare, in case our bid is accepted, that until a formal Contract is prepared & executed, this bid together with your written letter of acceptance thereof and your notification of award /Letter of Intent to Award the Contract shall constitute a binding contract between us. We further understand that you are not bound to accept the lowest or any bid you may receive.

Thanking you, we remain,

Yours faithfully,

Place Printed Name

Business Address Country of Incorporation (State or Province to be indicated)

Name and Address Principal Officer

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru - 560009

We declare that in terms of Clause No. 11 of ITT, Bid documents, the following are our lumpsum price in Rupees for the entire scope of work as specified in the Specifications and Documents.( Inclusive of all Taxes (Excluding GST) & Duties).

Total Lumpsum Price : ( In Figures) Note: Fill as "YES" against this column in case Prices are indicated in the Percentage-Wise Bid Financial Offer in figures

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2 (1 of 2)-SUMMARY OF PRICE COMPONENTS

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Summary of Price Components

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru - 560009.

Summary price components for identified in accompanying specifications

( Name of the Work) as per the scope identified in accompanying specifications.

Sl no Description Amount in Rs. (Fill as "YES" against the above Price columns in case Prices are indicated in the Price templates)

For Sub-stations Construction of associated Transmission lines/UG cable

A Material / Equipment Price (including Packing & Forwarding charges) in the Scope of the Contractor

i) Ex-works including all taxes (Excluding GST) & duties [As per schedules - 3A(i) for Station & 3B(i) for Line]

ii) Freight and Insurance Charges [As per schedules - 3A(i) for TB & 3B(i) for Line]

iii) Total FOR site price (i+ii)

B Mandatory spares price (including packing & forwarding charges) Void

i) Ex-works including all taxes (Excluding GST) & duties(As per schedule - 4) Void

ii) Freight and Insurance Charges (As per schedule -4)

iii)Total FOR site price (i + ii)

C Supply portion total FORD price [A(iii)+B(iii)]

D Erection portion:

i) Total charges for Erection, Testing & Commissioning of all Supply items [as per schedules-3A(ii) for Station, 3B(ii) for Line]

ii) Total charges for entire civil works [ as per Schedules-3C(i) for station and 3C(ii) for Line]

iii) Total civil works, erection, Testing and commisioning charges (i)+(ii)

E Total Bid Price = C+D(iii) In figures : Rs.

Total Bid Price in Figures : Rs.

Total Bid Price in words : Rupees

Note: The erection charges shall include the charges for taking delivery at Owner's store, unloading, handling, storage, erection, testing and commissioning of all equipments.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2 ( 2 of 2 ) - TAXES(Excluding GST), DUTIES & OTHER LEVIES

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

Fill IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru - 560009.

Estimates of Indian Taxes (Excluding GST), Duties and Levies included in the Total Bid Price are as follows:

SL. No. Description of Applicable Tax (Excluding GST) / Duty / Levy a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Rate of Tax (Excluding GST)/ Duty / Levy Amount of Taxes (Excluding GST) / Duties in Rupees Rate of Tax (Excluding GST) / Duty / Levy Amount of Taxes (Excluding GST)/ Duties in Rupees

1 SGST/UTGST Applicable taxes (Excluding GST), duties & levies prevailing as on the last date of bid submission shall be quoted

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

6 Building and other construction workers welfare Cess for Supply, Erection and Civil Portion works

8 a. Applicable Customs Duty (*) (Bidders shall also clearly indicate the breakup of Customs duty such as BCD, Cess,etc.,)

b. If there is any existing Treaty between India and the country from where the goods required for this project are proposed to be imported, then copy of the treaty shall be uploaded.

9 Other Taxes (Excluding GST) & duties if any (Specify) **

10 Other Taxes (Excluding GST)& duties if any (Specify) **

11 Total (Sum of 1 to 10)

(*) In case of CIF portion of Supply.

** Please Specify the nature of the other Taxes (Excluding GST) along with the details in the "Rate" Column.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2A : SCHEDULE OF DISCOUNT

SHEET FOR TECHNOCOMMERCIAL OPENING (UN - PRICED)

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

FILL ONLY IN LIGHT BLUE COLOURED CELLS. Fill as "YES" against Price columns in case Prices are indicated in the Item-Wise Bid Financial Offer

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electricity, Tendering & procurement, KPTCL, 9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru - 560009.

We hereby offer an unconditional discount on our quoted price in Schedule 2 (1 of2) as under. Any discounts offered anywere else in Bid shall not be considered.

Sl.No Nature of Discount a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Percentage of discount Amount (in Rs.) (Fill in as 'YES' in case Prices are indicated in the Percentage Wise Bid Financial Offer) Remarks

I Supply Schedules a) Ex-works prices

b) Freight & Insurance

II Erection Schedules

III Civil Works Schedules

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE- 2 B - STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Details of payments made in the form of Credit card/Debit card/NEFT/RTGS/OTC (over the counter) as per the tender conditions should be keyed in against column no. 3 (a) . BG Amount, BG No. and date, Name and address of the bank issuing the BG, validity of the BG should be keyed in against column no. 3 (b) .

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru - 560009

STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

Sl. No. Particulars Details

1 Bid proposal form Uploaded.

2 No deviation certificate Uploaded.

3. a). EMD / Bid Security Bids shall be accompanied by bid security (EMD); 1) Up to Rs.1.00Lakh The following modes of payment will be provided as a part of e-Payment services. • Credit Card/Debit Card • Net Banking • NEFT/RTGS • Over-the-Counter (OTC) • IMPS For further detail regarding mode of e-payment of EMD in e-procurement platform, contact e-procurement cell, Government of Karnataka.

b). EMD amount above Rs.1.00Lakh by Bank Guarantee/ Insurance Surety Bond (ISB)

4 Validity of the Bid.

5 Qualifying Requirements.

6 Financial capability

8 Taxes & Duties.

9 Completion Schedule

10 Defects Liability Period/Guarantee

11 Payment Terms

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3A(i): Price Breakup for-Station Supply Portion

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru - 560009.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

Sl No. Name of the Equipment/Materials Unit Total Qty Indicate whether "Own manufactured Item" or "Bought Out Item"

SS1 POWER TRANSFORMER: a) 150MVA, 220/66/11 kV Power Transformer, 3 Ph, 50 Hz, Core type, 3 winding Transformer Star/Star/Delta, Vector Group: YNyn0d11, OLTC, Bushing CT for Tertiary of ratio 1000/1A, 5P20, 15VA, ONAN/ONAF/OFAF with Fan control cubicle, RTCC Panel, Numerical RTCC panel with fibre optic temperature sensor, first filling of oil and 10% spare oil in non-returnable drums, etc., complete with 2x50% separate Radiator Bank on left side and terminal connector suitable for Single Moose ACSR on primary and Twin Mossse ACSR on secondary side of Transformer and Neutral connectors suitable for copper flats as per Technical Specifications. Note: Copper Flats required for Power Transformers shall be supplied alongwith the Transformers as per Technical Specifications. Nos 2

SS2 Nitrogen Injection fire extinguishing system including Civil Engineering works like soak pit etc., as per the recommendations of the supplier of the fire fighting system.(2 set for 150MVA power transformer) Set 2

SS3 Addressable type Fire alarm system using smoke detectors, heat detectors etc as per specification for GIS hall & control room. set 1

SS4 Metal encapsulated SF6 Gas insulated Switchgear 50kA for 220kV and 40kA for 66kV rating suitable for indoor installation of modular design. 1) 220 kV line (U.G.Cable) Module: Each module comprising of the following: a) SF6 circuit breaker Complete with operating Mechanism, 2000A, 1 Phase / 3 Phase-1 No. b) Disconnector: i) 3 Phase, Single Pole, Group operated isolator switch complete with manual & motor driven operating mechanism 1600A -3 Nos. ii) 3 Phase, Single Pole, Group operated maintenance earthing switch complete with manual operating mechanism 2 Nos. iii) 3 Phase, Single pole, fast acting, fault make earthing switch complete with group operated manual & motor driven operating mechanism-1 No. c) Current Transformer: 5 Core, Multi ratio, single phase current transformer 1600-800/1-1-1A plus additional 2 cores of 1600/1-1A (1 Set) 3Nos. d) Surge Arresters :- 198kV -(1set)- 3 Nos. e) Bus Bar-Double bus arrangement: i)Main Bus - 3000A ii) Auxiliary bus - 1600A f) Outdoor single Phase/3 phase SF6 ducts & SF6 to air bushing for outdoor connection along with support structures, foundation for SF6 to air bushing – As required Note: The bus and the equipments may be with single phase or 3 phase enclosure. g) Gas monitoring device, remote gas pressure transmitters (4-20mA signals) barrier pressure switches, UHF sensors, etc. as required. Note :The bus and the equipments may be with single phase or 3 phase enclosure. i) Control/Power /screened cables (FRLS type) from GIS module to LCC panel as per Technical specification- As required. ii) Mounting structure along with foundation, earthing, etc. for the above – 1 set. Nos 2

SS5 iii) Local control cubicle for 220kV line module as per specification. Nos 2

SS6 2)220 kV Bus Coupler Module Each module comprising of the following: a) SF6 circuit breaker Complete with operating Mechanism, 2000A, 1 Phase / 3 Phase-1 No. b) Disconnector: i) 3 Phase, Single Pole, Group operated isolator switch complete with manual & motor driven operating mechanism 1600A - 2 Nos. ii) 3 Phase, Single Pole, Group operated maintenance earthing switch complete with manual operating mechanism - 2 Nos. c) Current Transformer: 3 Core, Multi ratio, single phase current transformer 1600-800 / 1-1-1A Plus additional 2 cores of 1600/1-1A (1Set)3Nos. d) Bus Bar-Double bus arrangement: i)Main Bus - 3000A. ii)Auxiliary bus - 1600A. e) Gas monitoring device, remote gas pressure transmitters (4-20mA signals), barrier pressure switches, UHF sensors, etc. as required. NOTE: The bus and the equipments may be with single phase or 3 phase enclosure. f) Control/Power /screened cables (FRLS type) from GIS module to LCC panel as per Technical specification-As required. g) Mounting structure along with foundation, earthing, etc. for the above – 1 set. Nos 1

SS7 h) Local control cubicle for Bus coupler & Bus PT module. Nos 1

SS8 3) Transformer Module: (For 150 MVA-220 kV Side) Each module comprising of the following: a) SF6 circuit breaker Complete with operating Mechanism, 2000A, 1 Phase / 3 Phase-1 No. b) Disconnectors: i) 3 Phase, Single pole, Group operated isolator switch complete with manual & motor driven operating mechanism 1600 A - 3 Nos. ii)3 Phase, Single pole, Group operated maintenance earthing switch complete with manual operating mechanism -3Nos. c)Current Transformers 3 Core, Multi ratio, single phase current transformer 600-300/1-1-1A plus additional 2 cores of 1600/1-1A (1Set) -3 Nos. d)Surge Arrestor (198 kV)-(1 set)- 3 nos. e)Bus Bar-Double bus arrangement: i)Main Bus - 3000A ii) Auxiliary Bus-1600A. f)GIS module, Gas monitoring device, remote gas pressure transmitters (4-20 mA signals), barriers pressure switchers, UHF sensors, etc. as required. g)Outdoor single phase/3 phase SF6 ducts & SF6 to air bushings for out door connection along with support structures , foundation for SF6 to air bushing - As required. Note:- The bus and the equipments may be with single phase or 3 phase enclosure. h)Control/Power /screened cables (FRLS type) from GIS module to LCC panel as per Technical specification –As required. i)Mounting structure along with foundation, earthing etc for the above – 1 set Nos 2

SS9 j)Local control cubicle for 220kV side of 150MVA Transformer module Nos 2

SS10 4) Transformer Module: (For 150 MVA-66 kV Side) Each module comprising of the following: a) SF6 circuit breaker Complete with operating Mechanism, 2000A, 1 Phase / 3 Phase-1 No. b) Disconnectors: i) 3 Phase, Single pole, Group operated isolator switch complete with manual & motor driven operating mechanism 1600 A - 3 Nos. ii)3 Phase, Single pole, Group operated maintenance earthing switch complete with manual operating mechanism -3Nos. c)Current Transformers 3 Core, Multi ratio, single phase current transformer 1600-1000/1-1-1A (1Set) -3 Nos. d)Surge Arrestor (60 kV)-(1 set)- 3 nos. e)Bus Bar-Double bus arrangement: i)Main Bus - 2500A ii) Auxiliary Bus-1600A. f)Gas monitoring device, remote gas pressure transmitters (4-20 mA signals), barriers pressure switchers, UHF sensors, etc. as required. g)Outdoor single phase/3 phase SF6 ducts & SF6 to air bushings for out door connection along with support structures , foundation for SF6 to air bushing - As required. Note:- The bus and the equipments may be with single phase or 3 phase enclosure. h)Control/Power /screened cables (FRLS type) from GIS module to LCC panel as per Technical specification –As required. i)Mounting structure along with foundation, earthing etc for the above – 1 set Nos 2

SS11 j)Outdoor Local control cubicle for Transformer modules (66kV side) of 150MVA Transformer. Nos 2

SS12 5)66 kV Line (U.G.Cable) Module: with GIS surge arrester Each module comprising of the following: a)SF6 circuit breaker Complete with operating Mechanism, 2000A, 1 Phase / 3 Phase-1 No. b)Disconnector: i)3 Phase, Single pole, Group operated isolator switch complete with manual & motor driven operating mechanism 1600A -3 Nos. ii)3 Phase, Single Pole, Group operated maintenance earthing switch complete with manual operating mechanism -2 Nos. iii)3phase, single pole, fast acting, fault make earthing switch complete with group operated manual & motor driven operating mechanism-1 No. c)Current Transformer : 3 Core, Multi ratio, Single phase current transformer.1200-800/1-1-1A - 1 Set (3 Nos) d)Surge Arresters 60kV-1Set (3Nos) e)Cable end unit (Plug in type): 3Phase, Single pole, plug in type cable termination - 1 Run of 1000 sqmm for each phase - 1 set. f)Bus Bar-Double bus arrangement: i)Main Bus - 2500A ii)Auxiliary bus -1250A. g)Gas monitoring device, remote gas pressure trabsmitters (4-20mA signals), barriers pressure switches, UHF sensors, etc., as required. Note:- The bus and the equipments may be with single phase or 3 phase enclosure. h)Control/Power /screened cables (FRLS type) from GIS module to LCC panel as per Technical specification - As required. i)Mounting structure along with foundation, earthing etc for the above – 1 set Nos 7

SS13 j)Outdoor Local control cubicle of 66kV line module Nos 7

SS14 6)66/11kV Transformer module Each module comprising of the following: a)SF6 circuit breaker Complete with operating Mechanism, 2000A, 1 Phase/3phase -1 No. b)Disconnector: i) 3 Phase, Single Pole, Group operated isolator switch complete with manual & motor driven operating mechanism 2000A – 3 Nos. ii) 3 Phase, Single Pole, Group operated maintenance earthing switch complete with manual operating mechanism- 3 Nos. c)Current Transformer: 3 Core, Multi ratio, single phase current transformer 400-200/1-1-1A – (1 Set) 3 Nos. d)Surge Arresters (60kV):- 3Nos.(1set) e)Bus Bar- Double bus arrangement: i)Main bus- 2500 A ii)Auxiliary bus- 1250A f)Gas monitoring device, remote gas pressure trabsmitters (4-20mA signals), barriers pressure switches, UHF sensors, etc., as required. g)3 Single phase/three phase SF6 ducts and SF6 to Air bushing for outdoor connection along with support structure & foundation – As required. NOTE: The bus and the equipments may be with single phase or 3 phase enclosure. h)Control/Power /screened cables (FRLS type) from GIS module to LCC panel as per Technical specification- As required. h)Mounting structure along with foundation, earthing etc for the above – 1 set Nos 3

SS15 i)Local control cubicle for GIS module Nos 3

SS16 7)66kV Bus Coupler module Each module comprising of the following: a)SF6 circuit breaker Complete with operating Mechanism, 2000A, 1 Phase/3phase -1 No. b)Disconnector: i) 3 Phase, Single pole, Group operated isolator switch complete with manual & motor driven operating mechanism 1600A -2 Nos. i) 3 Phase, Single Pole, Group operated maintenance earthing switch complete with manual operating mechanism -2 Nos. c)Current Transformer : 3 Core, Multi ratio, Single phase current transformer.1600-1000/1-1-1A d)Bus Bar-Double bus arrangement: i)Main Bus - 2500A ii)Auxiliary - 1600A e)Gas monitoring device, remote gas pressure trabsmitters (4-20mA signals), barriers pressure switches, UHF sensors, etc., as required. Note:- The bus and the equipments may be with single phase or 3 phase enclosure. f)Control/Power /screened cables (FRLS type) from GIS module to LCC panel as per Technical specification- As required. g)Mounting structure along with foundation, earthing etc for the above – 1 set Nos 1

SS17 h)Local control cubicle suitable for bus coupler & Bus PT module. Nos 1

SS18 8)PT Module i)220 kV - 2 modules (1 for each bus) Nos 2

SS19 ii)66 kV - 2 Modules (1 for each bus). Each module comprising of the following: a)Disconnector: i)3 Phase, Single pole, Group operated isolator switch complete with manual & motor driven operating mechanism 1600A -for 220 kV, 1250 A - For 66 kV -1 No. ii)3 Phase, Single Pole, Group operated maintenance earthing switch complete with manual operating mechanism -1 No. b)Potential Transformer: 3 Core, Multi ratio, single phase potential transformer. i)220 kV/√3/110 V/√3 - 110 V/√3 -110/-√3-1Set (3Nos). ii) 66 kV/√3/110 V/√3 - 110 V/√3 -1Set (3Nos). c)Bus Bar-Double bus arrangement: i)Main Bus - 3000A for 220kV and 2500 A for 66kV ii) Auxiliary bus 1600 A-for 220 kV iii) Auxiliary bus 1250 A-for 66kV d)Gas monitoring device, remote gas pressure trabsmitters (4 20mA signals) barriers pressure switches, UHF sensors, etc., as required. e)Control/Power /screened cables (FRLS type) from GIS module to LCC panel as per Technical specification- As required. f)Mounting structure along with foundation, earthing etc for the above – 1 set Nos 2

SS20 9)Bus Maintenance earth switch 3 Phase, Single pole, Group operated maintenance earthing switch complete with manual operating mechanism -1600 Amp. Along with mounting structure, foundation, earthing etc., i) 220 kV - 2 nos. (1 for each bus) Nos 2

SS21 ii) 66 kV - 2 nos (1 for each bus) Nos 2

SS22 Control and Relay & Protection Panels complete as per specifications: I. C&R Panel compatible to IEC 61850 communication protocol for Sub-station Automation System, complete as per technical specifications. 1) 220 kV Line Type 2L (as per annexure RPP1-SAS) Nos 2

SS23 2) 220/66/11 kV Power Transformer panel Type 2T6 (as per annexure RPP2-SAS) Nos 2

SS24 3) 220 kV Bus coupler panel Type 2BC (as per annexure RPP1-SAS) Nos 1

SS25 4) 220 kV Bus Bar Protection panel Type 2BBA (as per annexure RPP3-SAS) Nos 1

SS26 5) 66 kV UG Cable - Type 6L (as per annexure RPP4-cable SAS) Nos 7

SS27 6) 66 kV Bus coupler panel Type 6BC (as per annexure RPP6-SAS) Nos 1

SS28 7) 66/11 kV Transformer panel Type 6T1(as per annexure RPP5-SAS) Nos 3

SS29 IV.11 kV line Type 11L (As per Annexure RPP7-SAS) Provision for 2 feeders to be made in one panel and provision for 1 capacitor bank & 1 feeder to be made in one panel) NOTE : 1) All the C&R panels and associated panels shall be of one and same make for uniformity and interchangeability of components. 2) The Accuracy class of metering core of CTs and also trivector meter of control & relay panels shall be 0.2S class and CVTs & VTs shall be 0.2 Class instead of that specified elsewhere in the respective clauses of Technical Specification of bidding documents. 3) The Electronic Trivector meters shall be as per technical specifications. Shall be provided both on HV side and IV side of both 220/110kV & 110kV/11kV transformers. 4)All numeriacl relays shall confirm to Protocols as per technical specification. 5)Proposed C&R Panel shall be interfaced with existing Bus bar protection & SAS panel. Nos 13

SS30 V. Sub-station Automation System including erection: (As per Annexure – SAS of Relay & Protection Panels and Sub-station Automation specification) Note: 1)The Accuracy class of metering core of CTs and also trivector meter of control & relay panels shall be 0.2s class and 0.2 for CVT & VT instead of that specified elsewhere in the respective clauses of Technical specification of bidding documents. 2)All the panels shall be of one and the same make for uniformity and interchangeability of components. 3)The Electronic Trivector meters with DLMS protocol & ABT features has to be provided both on the HV side and LV side of both 220/66kV transformers & 66/11kV Transformer. 4)Firm should provide sub station automation system at 220kV Hirehalli sub station on 6185 protocol & automatic energy meter reading facility. Data should be integrated to local SAS & to SLDC, Bengaluru using IEC 60870-5-104 protocol. Set 1

SS31 CURRENT TRANSFORMERS : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Copper Flat as per technical specifications. 1)220kV, 40kA CT of Ratio 600-300/1-1-1A (Required 150MVA Transformer NCT) For Metering : Accuracy 0.2s, Burden 10 VA For Differential /Distance protection PS class Vk = 1600V at 1600/1 A RCt 8ohms, 800V at 800/1A RCt 4 ohms For Bus bar protection PS Class, 1600V at 1600/1 A RCt 8ohms, 800V at 800/1A RCt 4 ohms Nos 2

SS32 2) 66kV 40kA CT of Ratio 1600-1000/1-1-1A [(Required for 150MVA Transformer NCT) For Metering : Accuracy 0.2s, Burden 10 VA For Backup protection : Accuracy 5P20. Burden 30 VA For Differential protection PS class Knee point voltage 1100V at 600/1 A,Rct 5 ohms @ 600/1A Nos 2

SS33 3) 66 kV class, 40 KA, CT of ratio 800-400/ 1-1-1A (Required for Line bays at 66/11kV Urdigere S/s, 66/11kV Kolala S/s, & 220/66/11kV Dabaspet S/s) Core - 1 : Vk-400 V at 200A, Rct 2 ohm at 200/1A, Accuracy class PS-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up Nos 15

SS34 Capacitive Voltage Transformers - Single Phase, with 2 secondaries, Terminal connector suitable for Al. tube / conductor with marshaling box, etc., complete as per Technical Specification. 245KV, 4400pF CVTs of Ratio 220KV/√3 /110V/√3-110V/√3 Protection Cores-1&2: 150VA Class 3P Nos 6

SS35 Surge Arresters : with Terminal connector suitable for Al. tube / conductor: 198KV, Metal Oxide with Surge counter, Station Medium duty (SM)-Discharge class 3 Nos 6

SS36 Telecommunication Equipment: 1)Wave Trap – 0.5mH, 2000A, 50kA Dual Band, 50 to 100kHz & 100 to 500kHz Pedestal type. Along with terminal connector suitable for Twin Moose ACSR conductor. Nos 4

SS37 2)PLCC Terminals (Carrier cabinets) : 40W Carrier cabinets Single Channel Nos 2

SS38 3)Protection couplers 4 commands version Nos 2

SS39 4)Digital Protection Coupler with 8 command with 220V DC Source Nos 2

SS40 5)Coupling Device with protective device (LMU+LMDU) Coupling Ph/Ph Set 2

SS41 6)HF Co-axial Cable 75 ohm KM 1

SS42 7)EPAX for PLCC Trunk/E&M/Line 16/8/8 Nos 1

SS43 8)Push Button Telephone Nos 6

SS44 9)48 Volts battery charger with 100A current Rating suitable for 400Ah Battery Nos 2

SS45 10)48Volts, 400Ah Battery Set Set 2

SS46 11)48V DCDB independent change over between DC source 1 and 2 with 20 feeders Nos 1

STATION STRUCTURES & MOUNTING STRUCTURES FOR 220kV SUB STATIONS (including Bolts & Nuts) as per Technical Specification and approved drawings: a) 220kV Side Station Structures : i) Station Structure Tower - 2T1 with peak. (1.578t per tower). (1.502t per tower for structure+ 0.076t per tower for Bolt &Nuts ) No/t 03/4.734

ii) Station Structure Beam suitable for fixing without under hung Isolator - 2B2. (1.167t per tower) (1.112t per tower for structure+ 0.055t per tower for Bolt & Nuts) No/t 02/2.334

iii) Lightning mast (2.8119t per tower) (2.678 per tower for structure +0.1339t per structure for Bolts & Nuts) No/t 06/16.871

iv) Street lighting lattice type structure along with GI pipe for fixing of LED lamp (0.182 MT + 5% B&N)-8.5 mtr height No/t 08/1.554

Mounting Structures: A) 220kV & 66kV MOUNTING STRUCTURES i. Current transformer 220 kV & NCT's (0.170 t per Structure) (0.160 t per tower for structure+ 0.010 t per tower for Bolt & Nuts) No/t 02/0.340

ii. Current transformer 66 kV CTs & 11kV NCT's (0.152 t per Structure) (0.140 t per tower for structure+ 0.012 t per tower for Bolt & Nuts) No/t 04/0.604

iii. Voltage transformer/CVT's 220kV (0.180 t per Structure) (0.170t per tower for structure+ 0.010 t per tower for Bolt & Nuts) No/t 06/1.080

iv. Lightening Arrestors 198kV (0.185 t per Structure) (0.180 t per tower for structure+ 0.005 t per tower for Bolt & Nuts) No/t 06/1.110

v. 220kV, 0.5mH Wave Trap (0.328t per Structure) (0.100t per tower for structure+ 0.011 t per tower for Bolt & Nuts) No/t 04/1.312

vi. Post insulators for 220 kV Line (0.144 t per Structure) (0.1270 t per tower for structure+ 0.017 t per tower for Bolt &Nuts) No/t 02/0.288

vii.For High post insulators for 150MVA transformer 220kV Side (0.221 t per tower) (0.210 per tower for structure+ 0.011) t per tower for Bolt &Nuts) No/t 06/1.326

viii.For High post insulators for 150MVA transformer 66kV Side (0.221 t per tower) (0.210 per tower for structure+ 0.011) t per tower for Bolt &Nuts) No/t 06/1.326

ix.For High post insulators for 66/11 kV transformer (0.218 t per tower) 3 Nos each (0.218 t per Structure) (0.208t per tower for structure+ 0.010 t per tower for Bolt &Nuts) No/t 06/1.308

SS47 Total Weight of 220kV Station structures & Mounting Structures (excluding Bolts & nuts) t 32.39

SS48 Total Weight of Bolts & nuts of Station structures & Mounting Structures t 1.7762

SS49 BUS BAR FORMATION : 1) Moose ACSR Conductor Mtrs 350

SS50 INSULATORS: Solid core Bus Post Insulator - Cylindrical Solid core Insulator as per IS:5350, Part-II & III & as per technical specification: 1) For 220kV side -2 units/stack i) High level Post Insulators for 150 MVA Tr Stack 6

SS51 ii) Low Level Post insulator for Line Stack 2

SS52 iii) Post insulator for wave trap Stack 12

SS53 2) For 66kV side -1 unit/stack i) High level Post Insulators for (150 MVA Tr -6 Nos, 31.5 MVA Tr -6 Nos.) Stack 12

SS54 Insulator Hardware & Clamps: i)Connector suitable for High Performance conductor to Moose ACSR conductor for 220KV Line Nos 12

SS55 ii)PI clamp suitable for High Post insulator and Moose ACSR-220kV side of 150 MVA Transformer Nos 6

SS56 iii)PI clamp suitable for low level post insulator and double Moose ACSR conductor -220kV Line side Nos 2

SS57 iv)PI clamp suitable for post insulator and Moose ACSR-66kV side for 31.5MVA transformer Nos 6

SS58 v)PI clamp suitable for post insulator and Twin Moose ACSR-66kV side for 150MVA transformer Nos 6

SS59 vi)Spacers for Twin Moose ACSR Nos 60

SS60 vii)Terminal connector for 220kV SF6 to Air bushing (for 220kV side of 150MVA Transformer) suitable for Moose ACSR Nos 6

SS61 viii)Terminal connector for 220kV SF6 to Air bushing (for 220kV Line Bay) suitable for Double Moose ACSR Nos 6

SS62 ix)Terminal connector for 66kV SF6 to Air bushing (for 66kV side of 150MVA Transformer) suitable for Double Moose ACSR. Nos 6

SS63 x)Terminal connector for SF6 to Air bushings (for 66kV side of (31.5MVA Transformer) suitable for Moose ACSR. Nos 6

SS64 Auxiliary Transformer: a) Supply of Station Auxiliary Transformer with copper windings & oil, cable termination type on both HT & LT, outdoor type, with off load tap changer in steps of 2.5 % as per technical specifications. with LT Distribution Box 250 kVA, 11 kV/433 V, Auxiliary Transformers, 3 Ph, Delta / Star - Dyn11 Nos 2

SS65 LTAC Panel(Indoor) 1) LTAC panel (indoor ) as per technical specification comprising of voltmete & ammeter, 415V,LTAC Panel (2 I/C ACB 800A+2 O/G SFU 200A+8 O/G SFU 100A+14 O/G SFU 63 A +12 O/G SFU 32 A+1B/C SFU 800A+1DG C/O switch 300A) Set 1

SS66 AC Distribution box (Outdoor) : a) AC distribution Box single front type, 6 terminals 750 x 1350 x 300 mm , one I / C of 100 Amps MCCB 20 KA + 6 O / G MCB 16 A + 1 O / G of 100 A, HRC fuse as per technical specifications. Nos 4

SS67 LT Power Cable: a) Power cable from auxiliary transformer to LTAC panel, 1.1kV PVC insulated 240sqmm Al. cable 3.5 core with glands / lugs/ferruls. Mtrs 200

SS68 b) 1.1 kV class PVC insulated Aluminium power cable (AC supply for lighting & DFDB/SFDB etc., 70 Sq mm, 3.5 core with glands / lugs / ferruls Mtrs 2000

SS69 DG set: Supply, Erection Testing & Commissioning of 3 phase, 50Hz, 415V, 0.8 PF, 58.5KVA DG Set, mounted on a base frame, complete with inbuilt fuel tank and battery 1 no. 12 V & inbuilt standard manual Control Panel with acoustic enclosure : NAL Approved D.G. Set 58.5KVA capacity with AMF panel as per technical specification Set 1

SS70 STATION BATTERY & BATTERY CHARGER: A) 220V, 600 AH Battery set (Plante/Grid Type) with cells & accessories as per technical specifications. Set 2

SS71 B) BATTERY CHARGER : Battery charger suitable for '2 X 220 V, 600 AH, with float (2 Nos) & float cum boost (2 Nos) type battery charger including control panels, change over arrangements etc., complete as per technical specifcation along with two separate DC distribution panel (indoor) 1I/C+20 O/G SFU 60 A+20 O/G SFU 30A. Set 1

SS72 PVC insulated Copper Control Cable with Lugs / Ferrules as per technical specifications. A) 1.1 kV class. Size of cable: 1) 19 Core 2.5 Sq.mm.Copper Control Cables KM 20

SS73 2) 14 Core 2.5 Sq.mm.Copper Control Cables KM 15

SS74 3) 10 Core 2.5 Sq.mm.Copper Control Cables KM 15

SS75 4) 4 Core 2.5 Sq.mm.Copper Control Cables KM 10

SS76 5) 4 Core 6.0 Sq.mm.Copper Control Cables KM 20

SS77 6)4 Core 16.0 Sq.mm.Copper Control Cables KM 2

SS78 7)4 Core 4 Sq.mm.Copper Control Cables KM 5

SS79 8) 2 Core 6 Sq.mm.Copper Control Cables (station Yard Lighting) KM 2.56

SS80 9) 2 Core 70 Sq.mm.Copper Control Cables KM 0.5

SS81 B) Copper PVC Instrumentation Cable, Armoured (Screened Cable) Copper Cable with glands/ lugs/ferrules :2P X 0.5 Sq mm screened cable KM 2.5

SS82 C) Copper PVC Instrumentation Cable, Armoured (Screened Cable) Copper Cable with glands/ lugs/ferrules :4P X 0.5 Sq mm screened cable KM 2

SS83 11 kV Switchgear:- 1) 11kV, 31.5KA, Metal Clad VCB Switchgear,2000A for 1 Incomer & 1250A for feeders (2I/C+1BC+20F+1AP+4CB) SAS compatible as per tchnical specification. Annunciator panel shall be simplex panel instead of desk type mentioned elsewhere in specification. Note: 1. The Remote Announciation cum Control panel is Simplex type. 2. The Electronic Trivector meters shall be as per technical specifications. 3.The switchgear for capacitor bank shall have necessary Over voltage / Under voltage / Circulating current relays and other protection relays as per specification. 4. The Switchgears Suitable for 31.5MVA,66/11kV Power Transformers. 5. The Switchgear will be supplied by KPTCL and the Bidder has to quote for complete scope of erection of Switchgear including moving the Switchgear from the point of unloading to the point of erection, erection of the complete Switchgear, wiring of Switchgear, testing & commissioning etc., complete. Set (Supplied by KPTCL) 1

SS84 11kV XLPE insulated UG Cable as per Technical specifications: a) 11 kV XLPE, 95 Sq mm Aluminium cable- 3 core (for 2 Auxiliary transformers from the 11KV switchgear) Mtrs 200

SS85 b) 11 kV XLPE cable, 1000 Sq. mm Aluminium cable- 3 Runs per phase of 1CX1000 Sq.mm cable from 66/11KV Transformers to 11KV Switchgear. Mtrs 1500

SS86 c) 11 kV XLPE cable, 400 Sq. mm Aluminium cable- 3 core to be run from 11KV Switchgear to 11KV take off DP structure & 11KV Capacitor Bank. Mtrs 2500

SS87 Cable Termination Kit suitable for following sizes as per Technical specifications: A. Indoor type: a) Heat shrinkable type Cable termination kits suitable for 1C x 1000 Sq.mm XLPE cable Nos 24

SS88 b) Heat shrinkable type Cable termination kits suitable for 3C x 400 Sq.mm XLPE cable Nos 24

SS89 c) Heat shrinkable type Cable termination kits suitable for 3C x 95 Sq. mm XLPE cable Nos 4

SS90 B. Outdoor type: a) Heat shrinkable type Cable termination kits suitable for 1Cx 1000 Sq.mm XLPE cable Nos 24

SS91 b) Heat shrinkable type Cable termination kits suitable for 3Cx 400 Sq.mm XLPE cable Nos 24

SS92 FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS i) Mechanical Foam Type Extinguisher : a) 50 Liters Nos 8

SS93 b) 09 Liters Nos 8

SS94 ii) Water type (gas pressure type) 9 Ltr. capacity Nos 10

SS95 iii) Carbon Dioxide Type 4.5 Kgs capacity Nos 10

SS96 iv) Sand type G.I Buckets 15 Ltr. capacity Nos 16

SS97 v) Steel stands Nos 4

SS98 Capacitor Bank: Design, Engineering, supply, erection, testing & commissioning of 5.8MVAR, 12.1kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable neutral CT and station class LAs, 0.2% series reactor on neutral side with mounting structures for NCT, Capacitor Bank, station class LAs, Series reactor with 10% spare capacitors complete etc,. complete as per specification. Note : For 11kV Switchgear & remote announciation /control of the Capacitor Bank refer Techno-commercial sheet. Set 4

SS99 11kV Isolators & DP structure: 1) 11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR for IP Feeders Set 4

SS100 2) 11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Twon and Industrial Feeders Set 14

SS101 3) Supply of DB Isolator, 400A, 25kA with LA with Lattice Type Mounting structure (for Capacitor Bank) Set 4

SS102 4) Supply of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A SIngle Break Isolators and 9 kV, 10 KA surge arrestor (3 No.) complete set for outgoing feeders ( above Sl no 1,2,3) Set 22

SS103 5) 9 kV, 10 KA surge arrestor with connector and clamp Nos 54

SS104 6) Supply of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector meter complete set with all accessories for auxilliary transformer. Set 2

SS105 Maintenance Tools and Plant: 1) Earth resistance tester Nos 1

SS106 2) Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons) Nos 1

SS107 3) Telescopic ladder Aluminium 6 Mtr. Height Nos 1

SS108 4) Ring spanner set Set 1

SS109 5) Tube spanner set Set 1

SS110 6)Pipe wrench 24 inch Nos 2

SS111 7) Pipe wrench 18 inch. Nos 2

SS112 8) Hydraulic crimping tools up to 1000 Sq.mm Nos 1

SS113 9) Welding machine (arc welding) 10kVA Nos 1

SS114 10) Heavy duty drilling machine Nos 1

SS115 11) Rubber hand gloves (15 kV tested) Pair 3

SS116 12) Rechargeable 5W LED hand torch Nos 4

SS117 13) Insulated cutting plier 12 inch size Nos 3

SS118 14) Insulated cutting plier 8 inch size Nos 3

SS119 15) Line live tester AC/DC 500 V Nos 2

SS120 16) Screw driver 18" Nos 3

SS121 17) Screw driver 12" Nos 3

SS122 18) Hammer 8 lbs Nos 2

SS123 19)Hammer 2 lbs Nos 2

SS124 20)Box spanners Set 1

SS125 21) Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester. Nos 1

SS126 22) Insulation megger 2.5 - 5 kV Nos 1

SS127 23) Insulation megger 500 V Nos 1

SS128 24) SF-6 gas leak Detector Nos 1

SS129 25) Multimeter electromechanical Nos 1

SS130 26) Multimeter Electronic Nos 1

SS131 27) Protective goggle Nos 2

SS132 28)Double end spanner - 12 nos. per set Set 1

SS133 29)Hack saw frames +B185 Nos 1

SS134 30)Hickery rods Nos 4

SS135 31)Grounding sticks extendable upto 18 ft - 3 nos. of each 6 ft Sticks of 3 phase R, Y, B (3 nos. of 1 set) Set 4

SS136 32)Manilla rope 1" (One bundle of 100 m) Nos 1

SS137 33)Manilla rope 3/4" (One bundle of 100 m) Nos 1

SS138 34)Files of sizes (One set of 6 nos.) Set 1

SS139 35)Rubber shoes knee height Pair 2

SS140 36)Safety belts Nos 2

SS141 37)Safety helmet with rachet Nos 4

SS142 38)Steel Measuring tape 30 m Nos 2

SS143 39)Steel Measuring tape 15 m Nos 2

SS144 40)Manual crimping tool upto 400 Sq mm Nos 1

SS145 41)Rain coat with dick back Nos 4

SS146 42)Gum Boots Pair 1

SS147 43)Hydraulic Bolt Cutter / Wire Cutter upto Drake ACSR conductor with bits for cuttings Nos 1

SS148 44)Thermometer with wall mounting holder Nos 1

SS149 45)Hand drilling machine Nos 1

SS150 Furniture for control room staff and maintenance staff: 1) Steel Almirahs 6 1/2 feet Nos 2

SS151 2) Steel Almirahs 6 1/2 feet with glass panel doors Nos 1

SS152 3) Officers tables Nos 4

SS153 4) Steel slotted angle rack (big size) Nos 4

SS154 5) Steel slotted angle rack (small size) Nos 4

SS155 6) Steel dust bins Nos 4

SS156 7) Executive Revolving chairs Nos 8

SS157 8) S type arm chairs Nos 10

SS158 9) Steel folding chairs Nos 4

SS159 MISCELLANEOUS ITEMS : 1) Rubber mats 2000 mm x 1000 mm x 12 mm size suitable. Nos 30

SS160 2) First aid box. Nos 1

SS161 3) Shock treatment charts, hard board, laminated with coloured pictures & literature both in Kannada & English. Nos 1

SS162 4) Water filter / Water purifier : Wall mounting type (Aqua-guard type). Nos 1

SS163 5) Sub-station name board duly painted. Nos 1

SS164 6) Fixograph of size 1.5m x 2.5m with English / Kannada alphabets. Set 1

SS165 7) Brass cupboard lock 6 levers (best make of approved quality) 75 mm size Nos 5

SS166 8) Danger board (prohibited) with support structure including fixing in front of the gate Nos 1

SS167 9) Equipments name plates and earthing name plates including fixing at outdoor yard Nos 150

SS168 STATION & YARD LIGHTING (OUTDOOR) (To be designed, assessed & quoted by the bidder) i)Supply and installation/ Fixing/ Provision of Outdoortype Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shockproof, IP65 (WeatherProof), rustproof, dustproof, waterproof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Metering suitable baseplate and having a provision for Fuse/ MCBcut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility,Timer,Contactor,2 Way head frame with diecast LM-6 pulleys ,stainless steel axle,Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5 mm dia,stainless steel wire rope of AISI304 grade7/19-core, Suitable reversible geared motor operating on 230/415V,50Hz,etc., as per technical specification Nos 6

SS169 ii) Supply & Fixing of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material LED streetlight 200W Note:6 Nos. of Lightning / Lighting Mast (LM) tubular type are proposed for lightning protection and for illumination of the station Yard. The quantity of lightning / lighting mast indicated are located such that the entire station yard with equipments is protected against lightning. However any additional lighting masts may be provided for sufficient illumination and lightning protection (DSLP)of yard, if necessary. The design of lighting outdoor & indoor is also in the scope of the bidder as specified elsewhere in the technical specification. The scope also includes supply & erection of lighting fixtures, lighting mast panels with timer, contactor, control cable, Motorized hoist etc. Suitable 2.5M Lightning spikes shall be provided on top of GIS building for Lightning protection. The Design of lighting outdoor & Indoor in station yard and GIS buildings etc. is in the scope of bidder as specified in the technical specification. Nos 32

SS170 SDH EQUIPMENT: 1) (STM-16 MADM UPTO 3 MSP PROTECTED DIRECTIONS)-BASE EQUIPMENT (COMMON CARDS, CROSS CONNECT/CONTROL CARDS,OPTICAL BASECARDS,POWER SUPPLY CARDS, POWER CABLING, OTHER HARDWARE AND ACCESSORIES INCLUDING SUB RACKS PATCH CORD, DDF ETC FULLY EQUIPPED EXCLUDING OPTICAL INTERFACE & TRIBUTARY CARDS. NOTE: STM-16 equipment supplied under the subject work shall be of same make and model as supplied for KPTCL FOTE under relisble communication OPGW project of KPTCL and to be integrated to NMS-OPGW of KPTCL Nos 1

SS171 2) OPTICAL INTERFACE-Transceiver i) L16.1 SFP - (30-50 kms) Nos 2

SS172 i) L16.2 SFP - (50-75 kms) Nos 2

SS173 3) TRIBUTARY INTERFACE i) E1 Interface card (Min. 16 interfaces per card) - 3 MSP Nos 2

SS174 ii) Ethernet interface 10/100 Mbps with layer-2 switching (Min, 2X1GBPS+4X100/10 Mbps ports) without SFP - 3MSP. Nos 2

SS175 iii) 1X1000 base LX SFP (GIGABIT ETHERNET INTERFACES 10/100 MBPS WITH LAYER-2 SWITCHING) Nos 2

SS176 iv) Cabinet Equipment to house SDH Equipment + Optical cards + Tributary Cards, Drop/Insert MUX Equipments and DACS Equipment Set 1

SS177 v) 220V DC to 48V DC CONVERTER for SDH equipment Nos 1

SS178 vi) VOIP Phone Nos 2

SS179 vii) Routers for change over between OFC & VSAT communication for SCADA Data Note: The FOTE to be integrated to existing NMS provided at SLDC KPTCL Nos 1

SS180 66kV EHV UG Cable Portion for terminating 66kV Lines ( 6 Nos except for Honnudike line bay ) to GIS module from CTTs.: i) 38/66 kV (Earthed), 1C X 1000 Sq mm stranded, annealed, copper conductor, segmental, compact, circular, (Milliken), conductor screen, cross linked polyethylene (XLPE) insulation, core screen, semiconducting water swellable layer, lead alloy 'E' sheathed, semi-conducting bedding tapes, helically applied plain round copper wire screen, plain copper tape in open helix, water swellable tape with overall extruded high density polyethylene sheath coated with graphite and anti-termite treated as per technical specification. ( 2100 mtrs in total for 6 lines) KM 6.3

SS181 ii)) Outdoor type cable end termination suitable for 66 kV, 1C X 1000 Sq mm segmental compact type miliken copper conductor, XLPE, lead sheathed cable as per technical specification. Nos 18

SS182 iii) Indoor type cable termination (plug in dry type) suitable for GIS modules confirming to IEC 62271-209 for 66 kV, 1000 Sq mm, copper conductor, XLPE insulated lead sheathed cable as per technical specification. Nos 18

SS183 iv) Single phase Link box outdoor structure mounting type, with SVL suitable for 110 kV & 66 kV, 1000/630/400/240 Sq mm UG cable including 240 Sq mm sheath bonding cable as per the technical specification. Nos 18

SS184 v) Surge Arrestor: 60 kV class III, Heavy duty Metal oxide type, porcelain housing gapless type with surge counter. Nos 18

SS185 vi) Terminal connectors to connect cable end termination to the Single Coyote ACSR conductor with bolts & nuts and washers, complete. set 15

SS186 vii) Terminal connectors to connect cable end termination to the Single Drake conductor with bolts & nuts and washers, complete. (66kV UG Cable to Moose ACSR Rate considered) set 3

SS187 Optical fibre and its accessories : i) Unarmoured Underground FO cable (48 DWSM) KM 2.1

SS188 ii) Polyvinyl lubricated bond ( PLB) Pipe KM 2.1

SS189 iii) Straight Joint kit for optical fibre cable Nos 2

SS190 iv) OFC End terminal (LIU suitable for 48F) Nos 6

SS191 v) Collars for PLB Pipe Nos 4

SS192 vi)Media convertor Nos 2

NOTE: 1. Any clarifications / hard copy of drawings can be obtained from the office of the Chief Engineer Electricity, Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru .

2. Spacers shall be provided wherever necessary and no extra charges is payable on account of the same.

3. Supply of equipment/materials and the Erection charges shall include loading and unloading.

4. Copper Flat and GI Flat required for Power Transformers (if supply is in Bidder's scope) shall be supplied alongwith the Transformers and no extra cost is payable on this account.

5. The Bidder shall take necessary action to ensure that all the materials supplied shall be properly housed to ensure satisfactory commissioning.

6. The Bidder shall quote same rates for common materials in all the Percentage-Wise Financial Bid Offer.

7. The Prices for all the materials shall be quoted in the Percentage- wise finanacial bid.

8.Released materials/Dismantled(if any) shall be transported to the nearest KPTCL Projects Division Stores without any additional cost as per the directions of the Engineer in charge of the work.

9. The Bidder shall clearly indicate whether the materials/equipments are “Own manufactured” or “Bought out item”.

It shall be noted that, the total ceiling weight of Station structures and Mounting Structures and structure foundation volumes indicated in the Techno-commercial sheets and ‘Percentagewise Financial offer’ in KPP portal shall be the same. In case any discrepancies is noticed between total ceiling weight of Station structures and Mounting Structures and structure foundation volumes indicated in ‘Percentage wise Financial offer’ and Techno-commercial sheets, the total ceiling weight of Station structures and Mounting Structures and structure foundation volumes indicated in KPP portal shall be considered for Price evaluation.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 3A(ii) :- Price Breakup for- Station Erection Portion

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electricity, Tendering & Procurement, KPTCL,9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru - 560009.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

Sl No. Name of the Equipment/Materials Unit

SE1 POWER TRANSFORMER: a) 150MVA, 220/66/11 kV Power Transformer, 3 Ph, 50 Hz, Core type, 3 winding Transformer Star/Star/Delta, Vector Group: YNyn0d11, OLTC, Bushing CT for Tertiary of ratio 1000/1A, 5P20, 15VA, ONAN/ONAF/OFAF with Fan control cubicle, RTCC Panel, Numerical RTCC panel with fibre optic temperature sensor, first filling of oil and 10% spare oil in non-returnable drums, etc., complete with 2x50% separate Radiator Bank on left side and terminal connector suitable for Single Moose ACSR on primary and Twin Mossse ACSR on secondary side of Transformer and Neutral connectors suitable for copper flats as per Technical Specifications. Note: Copper Flats required for Power Transformers shall be supplied alongwith the Transformers as per Technical Specifications. Nos 2

SE2 Metal encapsulated SF6 Gas insulated Switchgear 50kA for 220kV and 40kA for 66kV rating suitable for indoor installation of modular design. 1) 220 kV line (U.G.Cable) Module: Each module comprising of the following: a) SF6 circuit breaker Complete with operating Mechanism, 2000A, 1 Phase / 3 Phase-1 No. b) Disconnector: i) 3 Phase, Single Pole, Group operated isolator switch complete with manual & motor driven operating mechanism 1600A -3 Nos. ii) 3 Phase, Single Pole, Group operated maintenance earthing switch complete with manual operating mechanism 2 Nos. iii) 3 Phase, Single pole, fast acting, fault make earthing switch complete with group operated manual & motor driven operating mechanism-1 No. c) Current Transformer: 5 Core, Multi ratio, single phase current transformer 1600-800/1-1-1A plus additional 2 cores of 1600/1-1A (1 Set) 3Nos. d) Surge Arresters :- 198kV -(1set)- 3 Nos. e) Bus Bar-Double bus arrangement: i)Main Bus - 3000A ii) Auxiliary bus - 1600A f) Outdoor single Phase/3 phase SF6 ducts & SF6 to air bushing for outdoor connection along with support structures, foundation for SF6 to air bushing – As required Note: The bus and the equipments may be with single phase or 3 phase enclosure. g) Gas monitoring device, remote gas pressure transmitters (4-20mA signals) barrier pressure switches, UHF sensors, etc. as required. Note :The bus and the equipments may be with single phase or 3 phase enclosure. i) Control/Power /screened cables (FRLS type) from GIS module to LCC panel as per Technical specification- As required. ii) Mounting structure along with foundation, earthing, etc. for the above – 1 set. Nos 2

SE3 2)220 kV Bus Coupler Module Each module comprising of the following: a) SF6 circuit breaker Complete with operating Mechanism, 2000A, 1 Phase / 3 Phase-1 No. b) Disconnector: i) 3 Phase, Single Pole, Group operated isolator switch complete with manual & motor driven operating mechanism 1600A - 2 Nos. ii) 3 Phase, Single Pole, Group operated maintenance earthing switch complete with manual operating mechanism - 2 Nos. c) Current Transformer: 3 Core, Multi ratio, single phase current transformer 1600-800 / 1-1-1A Plus additional 2 cores of 1600/1-1A (1Set)3Nos. d) Bus Bar-Double bus arrangement: i)Main Bus - 3000A. ii)Auxiliary bus - 1600A. e) Gas monitoring device, remote gas pressure transmitters (4-20mA signals), barrier pressure switches, UHF sensors, etc. as required. NOTE: The bus and the equipments may be with single phase or 3 phase enclosure. f) Control/Power /screened cables (FRLS type) from GIS module to LCC panel as per Technical specification-As required. g) Mounting structure along with foundation, earthing, etc. for the above – 1 set. Nos 1

SE4 3) Transformer Module: (For 150 MVA-220 kV Side) Each module comprising of the following: a) SF6 circuit breaker Complete with operating Mechanism, 2000A, 1 Phase / 3 Phase-1 No. b) Disconnectors: i) 3 Phase, Single pole, Group operated isolator switch complete with manual & motor driven operating mechanism 1600 A - 3 Nos. ii)3 Phase, Single pole, Group operated maintenance earthing switch complete with manual operating mechanism -3Nos. c)Current Transformers 3 Core, Multi ratio, single phase current transformer 600-300/1-1-1A plus additional 2 cores of 1600/1-1A (1Set) -3 Nos. d)Surge Arrestor (198 kV)-(1 set)- 3 nos. e)Bus Bar-Double bus arrangement: i)Main Bus - 3000A ii) Auxiliary Bus-1600A. f)GIS module, Gas monitoring device, remote gas pressure transmitters (4-20 mA signals), barriers pressure switchers, UHF sensors, etc. as required. g)Outdoor single phase/3 phase SF6 ducts & SF6 to air bushings for out door connection along with support structures , foundation for SF6 to air bushing - As required. Note:- The bus and the equipments may be with single phase or 3 phase enclosure. h)Control/Power /screened cables (FRLS type) from GIS module to LCC panel as per Technical specification –As required. i)Mounting structure along with foundation, earthing etc for the above – 1 set Nos 2

SE5 4) Transformer Module: (For 150 MVA-66 kV Side) Each module comprising of the following: a) SF6 circuit breaker Complete with operating Mechanism, 2000A, 1 Phase / 3 Phase-1 No. b) Disconnectors: i) 3 Phase, Single pole, Group operated isolator switch complete with manual & motor driven operating mechanism 1600 A - 3 Nos. ii)3 Phase, Single pole, Group operated maintenance earthing switch complete with manual operating mechanism -3Nos. c)Current Transformers 3 Core, Multi ratio, single phase current transformer 1600-1000/1-1-1A (1Set) -3 Nos. d)Surge Arrestor (60 kV)-(1 set)- 3 nos. e)Bus Bar-Double bus arrangement: i)Main Bus - 2500A ii) Auxiliary Bus-1600A. f)Gas monitoring device, remote gas pressure transmitters (4-20 mA signals), barriers pressure switchers, UHF sensors, etc. as required. g)Outdoor single phase/3 phase SF6 ducts & SF6 to air bushings for out door connection along with support structures , foundation for SF6 to air bushing - As required. Note:- The bus and the equipments may be with single phase or 3 phase enclosure. h)Control/Power /screened cables (FRLS type) from GIS module to LCC panel as per Technical specification –As required. i)Mounting structure along with foundation, earthing etc for the above – 1 set Nos 2

SE6 5)66 kV Line (U.G.Cable) Module: with GIS surge arrester Each module comprising of the following: a)SF6 circuit breaker Complete with operating Mechanism, 2000A, 1 Phase / 3 Phase-1 No. b)Disconnector: i)3 Phase, Single pole, Group operated isolator switch complete with manual & motor driven operating mechanism 1600A -3 Nos. ii)3 Phase, Single Pole, Group operated maintenance earthing switch complete with manual operating mechanism -2 Nos. iii)3phase, single pole, fast acting, fault make earthing switch complete with group operated manual & motor driven operating mechanism-1 No. c)Current Transformer : 3 Core, Multi ratio, Single phase current transformer.1200-800/1-1-1A - 1 Set (3 Nos) d)Surge Arresters 60kV-1Set (3Nos) e)Cable end unit (Plug in type): 3Phase, Single pole, plug in type cable termination - 1 Run of 1000 sqmm for each phase - 1 set. f)Bus Bar-Double bus arrangement: i)Main Bus - 2500A ii)Auxiliary bus -1250A. g)Gas monitoring device, remote gas pressure trabsmitters (4-20mA signals), barriers pressure switches, UHF sensors, etc., as required. Note:- The bus and the equipments may be with single phase or 3 phase enclosure. h)Control/Power /screened cables (FRLS type) from GIS module to LCC panel as per Technical specification - As required. i)Mounting structure along with foundation, earthing etc for the above – 1 set Nos 7

SE7 6)66/11kV Transformer module Each module comprising of the following: a)SF6 circuit breaker Complete with operating Mechanism, 2000A, 1 Phase/3phase -1 No. b)Disconnector: i) 3 Phase, Single Pole, Group operated isolator switch complete with manual & motor driven operating mechanism 2000A – 3 Nos. ii) 3 Phase, Single Pole, Group operated maintenance earthing switch complete with manual operating mechanism- 3 Nos. c)Current Transformer: 3 Core, Multi ratio, single phase current transformer 400-200/1-1-1A – (1 Set) 3 Nos. d)Surge Arresters (60kV):- 3Nos.(1set) e)Bus Bar- Double bus arrangement: i)Main bus- 2500 A ii)Auxiliary bus- 1250A f)Gas monitoring device, remote gas pressure trabsmitters (4-20mA signals), barriers pressure switches, UHF sensors, etc., as required. g)3 Single phase/three phase SF6 ducts and SF6 to Air bushing for outdoor connection along with support structure & foundation – As required. NOTE: The bus and the equipments may be with single phase or 3 phase enclosure. h)Control/Power /screened cables (FRLS type) from GIS module to LCC panel as per Technical specification- As required. h)Mounting structure along with foundation, earthing etc for the above – 1 set Nos 3

SE8 7)66kV Bus Coupler module Each module comprising of the following: a)SF6 circuit breaker Complete with operating Mechanism, 2000A, 1 Phase/3phase -1 No. b)Disconnector: i) 3 Phase, Single pole, Group operated isolator switch complete with manual & motor driven operating mechanism 1600A -2 Nos. i) 3 Phase, Single Pole, Group operated maintenance earthing switch complete with manual operating mechanism -2 Nos. c)Current Transformer : 3 Core, Multi ratio, Single phase current transformer.1600-1000/1-1-1A d)Bus Bar-Double bus arrangement: i)Main Bus - 2500A ii)Auxiliary - 1600A e)Gas monitoring device, remote gas pressure trabsmitters (4-20mA signals), barriers pressure switches, UHF sensors, etc., as required. Note:- The bus and the equipments may be with single phase or 3 phase enclosure. f)Control/Power /screened cables (FRLS type) from GIS module to LCC panel as per Technical specification- As required. g)Mounting structure along with foundation, earthing etc for the above – 1 set Nos 1

SE9 8)PT Module i)220 kV - 2 modules (1 for each bus) Nos 2

SE10 ii)66 kV - 2 Modules (1 for each bus). Each module comprising of the following: a)Disconnector: i)3 Phase, Single pole, Group operated isolator switch complete with manual & motor driven operating mechanism 1600A -for 220 kV, 1250 A - For 66 kV -1 No. ii)3 Phase, Single Pole, Group operated maintenance earthing switch complete with manual operating mechanism -1 No. b)Potential Transformer: 3 Core, Multi ratio, single phase potential transformer. i)220 kV/√3/110 V/√3 - 110 V/√3 -110/-√3-1Set (3Nos). ii) 66 kV/√3/110 V/√3 - 110 V/√3 -1Set (3Nos). c)Bus Bar-Double bus arrangement: i)Main Bus - 3000A for 220kV and 2500 A for 66kV ii) Auxiliary bus 1600 A-for 220 kV iii) Auxiliary bus 1250 A-for 66kV d)Gas monitoring device, remote gas pressure trabsmitters (4 20mA signals) barriers pressure switches, UHF sensors, etc., as required. e)Control/Power /screened cables (FRLS type) from GIS module to LCC panel as per Technical specification- As required. f)Mounting structure along with foundation, earthing etc for the above – 1 set Nos 2

SE11 9)Bus Maintenance earth switch 3 Phase, Single pole, Group operated maintenance earthing switch complete with manual operating mechanism -1600 Amp. Along with mounting structure, foundation, earthing etc., i) 220 kV - 2 nos. (1 for each bus) Nos 2

SE12 ii) 66 kV - 2 nos (1 for each bus) Nos 2

SE13 Control and Relay & Protection Panels complete as per specifications: I. C&R Panel compatible to IEC 61850 communication protocol for Sub-station Automation System, complete as per technical specifications. 1) 220 kV Line Type 2L (as per annexure RPP1-SAS) Nos 2

SE14 2) 220/66/11 kV Power Transformer panel Type 2T6 (as per annexure RPP2-SAS) Nos 2

SE15 3) 220 kV Bus coupler panel Type 2BC (as per annexure RPP1-SAS) Nos 1

SE16 4) 220 kV Bus Bar Protection panel Type 2BBA (as per annexure RPP3-SAS) Nos 1

SE17 5) 66 kV UG Cable - Type 6L (as per annexure RPP4-cable SAS) Nos 7

SE18 6) 66 kV Bus coupler panel Type 6BC (as per annexure RPP6-SAS) Nos 1

SE19 7) 66/11 kV Transformer panel Type 6T1(as per annexure RPP5-SAS) Nos 3

SE20 IV.11 kV line Type 11L (As per Annexure RPP7-SAS) Provision for 2 feeders to be made in one panel and provision for 1 capacitor bank & 1 feeder to be made in one panel) NOTE : 1) All the C&R panels and associated panels shall be of one and same make for uniformity and interchangeability of components. 2) The Accuracy class of metering core of CTs and also trivector meter of control & relay panels shall be 0.2S class and CVTs & VTs shall be 0.2 Class instead of that specified elsewhere in the respective clauses of Technical Specification of bidding documents. 3) The Electronic Trivector meters shall be as per technical specifications. Shall be provided both on HV side and IV side of both 220/110kV & 110kV/11kV transformers. 4)All numeriacl relays shall confirm to Protocols as per technical specification. 5)Proposed C&R Panel shall be interfaced with existing Bus bar protection & SAS panel. Nos 13

SE21 CURRENT TRANSFORMERS : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Copper Flat as per technical specifications. 1)220kV, 40kA CT of Ratio 600-300/1-1-1A (Required 150MVA Transformer NCT) For Metering : Accuracy 0.2s, Burden 10 VA For Differential /Distance protection PS class Vk = 1600V at 1600/1 A RCt 8ohms, 800V at 800/1A RCt 4 ohms For Bus bar protection PS Class, 1600V at 1600/1 A RCt 8ohms, 800V at 800/1A RCt 4 ohms Nos 2

SE22 2) 66kV 40kA CT of Ratio 1600-1000/1-1-1A [(Required for 150MVA Transformer NCT) For Metering : Accuracy 0.2s, Burden 10 VA For Backup protection : Accuracy 5P20. Burden 30 VA For Differential protection PS class Knee point voltage 1100V at 600/1 A,Rct 5 ohms @ 600/1A Nos 2

SE23 3) 66 kV class, 40 KA, CT of ratio 800-400/ 1-1-1A (Required for Line bays at 66/11kV Urdigere S/s, 66/11kV Kolala S/s, & 220/66/11kV Dabaspet S/s) Core - 1 : Vk-400 V at 200A, Rct 2 ohm at 200/1A, Accuracy class PS-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up Nos 15

SE24 Capacitor Voltage Transformers - Single Phase, with 2 secondaries, Terminal connector suitable for Al. tube / conductor with marshaling box, etc., complete as per Technical Specification. 245KV, 4400pF CVTs of Ratio 220KV/√3 /110V/√3-110V/√3 Protection Cores-1&2: 150VA Class 3P Nos 6

SE25 Surge Arresters : with Terminal connector suitable for Al. tube / conductor: 198KV, Metal Oxide with Surge counter, Station Medium duty (SM)-Discharge class 3 Nos 6

SE26 Telecommunication Equipment: 1)Wave Trap – 0.5mH, 2000A, 50kA Dual Band, 50 to 100kHz & 100 to 500kHz Pedestal type. Along with terminal connector suitable for Twin Moose ACSR conductor. Nos 4

SE27 2)PLCC Terminals (Carrier cabinets) : 40W Carrier cabinets Single Channel Nos 2

SE28 3)Digital Protection Coupler with 8 command with 220V DC Source Nos 2

SE29 4)Coupling Device with protective device (LMU+LMDU) Coupling Ph/Ph Set 2

SE30 5)HF Co-axial Cable 75 ohm KM 1

SE31 6)EPAX for PLCC Trunk/E&M/Line 16/8/8 Nos 1

SE32 7)48 Volts battery charger with 100A current Rating suitable for 400Ah Battery Nos 2

SE33 8)48Volts, 400Ah Battery Set Set 2

STATION STRUCTURES & MOUNTING STRUCTURES FOR 220kV SUB STATIONS (including Bolts & Nuts) as per Technical Specification and approved drawings: a) 220kV Side Station Structures : i) Station Structure Tower - 2T1 with peak. (1.578t per tower). (1.502t per tower for structure+ 0.076t per tower for Bolt &Nuts ) No/t 03/4.734

ii) Station Structure Beam suitable for fixing without under hung Isolator - 2B2. (1.167t per tower) (1.112t per tower for structure+ 0.055t per tower for Bolt & Nuts) No/t 02/2.334

iii) Lightning mast (2.8119t per tower) (2.678 per tower for structure +0.1339t per structure for Bolts & Nuts) No/t 06/16.871

iv) Street lighting lattice type structure along with GI pipe for fixing of LED lamp (0.182 MT + 5% B&N)-8.5 mtr height No/t 08/1.554

Mounting Structures: A) 220kV & 66kV MOUNTING STRUCTURES i. Current transformer 220 kV & NCT's (0.170 t per Structure) (0.160 t per tower for structure+ 0.010 t per tower for Bolt & Nuts) No/t 02/0.340

ii. Current transformer 66 kV CTs & 11kV NCT's (0.152 t per Structure) (0.140 t per tower for structure+ 0.012 t per tower for Bolt & Nuts) No/t 04/0.604

iii. Voltage transformer/CVT's 220kV (0.180 t per Structure) (0.170t per tower for structure+ 0.010 t per tower for Bolt & Nuts) No/t 06/1.080

iv. Lightening Arrestors 198kV (0.185 t per Structure) (0.180 t per tower for structure+ 0.005 t per tower for Bolt & Nuts) No/t 06/1.110

v. 220kV, 0.5mH Wave Trap (0.328t per Structure) (0.100t per tower for structure+ 0.011 t per tower for Bolt & Nuts) No/t 04/1.312

vi. Post insulators for 220 kV Line (0.144 t per Structure) (0.1270 t per tower for structure+ 0.017 t per tower for Bolt &Nuts) No/t 02/0.288

vii.For High post insulators for 150MVA transformer 220kV Side (0.221 t per tower) (0.210 per tower for structure+ 0.011) t per tower for Bolt &Nuts) No/t 06/1.326

viii.For High post insulators for 150MVA transformer 66kV Side (0.221 t per tower) (0.210 per tower for structure+ 0.011) t per tower for Bolt &Nuts) No/t 06/1.326

ix.For High post insulators for 66/11 kV transformer (0.218 t per tower) 3 Nos each (0.218 t per Structure) (0.208t per tower for structure+ 0.010 t per tower for Bolt &Nuts) No/t 06/1.308

SE34 Total Weight of 220kV Station structures & Mounting Structures in cluding Bolts & nuts t 13.748

SE35 Total Weight of 66kV Station structures & Mounting Structures in cluding Bolts & nuts t 20.4182

SE36 INSULATORS: Solid core Bus Post Insulator - Cylindrical Solid core Insulator as per IS:5350, Part-II & III & as per technical specification: 1) For 220kV side -2 units/stack i) High level Post Insulators for 150 MVA Tr Stack 6

SE37 ii) Low Level Post insulator for Line Stack 2

SE38 iii) Post insulator for wave trap Stack 12

SE39 2) For 66kV side -1 unit/stack i) High level Post Insulators for (150 MVA Tr -6 Nos, 31.5 MVA Tr -6 Nos.) Stack 12

SE40 Auxiliary Transformer: a) Erection of Station Auxiliary Transformer with copper windings & oil, cable termination type on both HT & LT, outdoor type, with off load tap changer in steps of 2.5 % as per technical specifications with LT Distribution Box 250 kVA, 11 kV/433 V, Auxiliary Transformers, 3 Ph, Delta / Star - Dyn11 Nos 2

SE41 LTAC Panel(Indoor) 1) LTAC panel (indoor ) as per technical specification comprising of voltmete & ammeter, 415V,LTAC Panel (2 I/C ACB 800A+2 O/G SFU 200A+8 O/G SFU 100A+14 O/G SFU 63 A +12 O/G SFU 32 A+1B/C SFU 800A+1DG C/O switch 300A) Set 1

SE42 AC Distribution box (Outdoor) : a) AC distribution Box single front type, 6 terminals 750 x 1350 x 300 mm , one I / C of 100 Amps MCCB 20 KA + 6 O / G MCB 16 A + 1 O / G of 100 A, HRC fuse as per technical specifications. Nos 4

SE43 LT Power Cable: a) Power cable from auxiliary transformer to LTAC panel, 1.1kV PVC insulated 240sqmm Al. cable 3.5 core with glands / lugs/ferruls. Mtrs 200

SE44 b) 1.1 kV class PVC insulated Aluminium power cable (AC supply for lighting & DFDB/SFDB etc., 70 Sq mm, 3.5 core with glands / lugs / ferruls Mtrs 2000

SE45 STATION BATTERY & BATTERY CHARGER: 1) 220V, 600 AH Battery set (Plante/Grid Type) with cells & accessories as per technical specifications. Set 2

SE46 B) BATTERY CHARGER : 1) Battery charger suitable for '2 X 220 V, 600 AH, with float (2 Nos) & float cum boost (2 Nos) type battery charger including control panels, change over arrangements etc., complete as per technical specifcation along with two separate DC distribution panel (indoor) 1I/C+20 O/G SFU 60 A+20 O/G SFU 30A. Set 1

SE47 PVC insulated Copper Control Cable with Lugs / Ferrules as per technical specifications. A) 1.1 kV class. Size of cable: 1) 19 Core 2.5 Sq.mm.Copper Control Cables KM 20

SE48 2) 14 Core 2.5 Sq.mm.Copper Control Cables KM 15

SE49 3) 10 Core 2.5 Sq.mm.Copper Control Cables KM 15

SE50 4) 4 Core 2.5 Sq.mm.Copper Control Cables KM 10

SE51 5) 4 Core 6.0 Sq.mm.Copper Control Cables KM 20

SE52 6)4 Core 16.0 Sq.mm.Copper Control Cables KM 2

SE53 7)4 Core 4 Sq.mm.Copper Control Cables KM 5

SE54 8) 2 Core 6 Sq.mm.Copper Control Cables (station Yard Lighting) KM 2.56

SE55 9) 2 Core 70 Sq.mm.Copper Control Cables KM 0.5

SE56 B) Copper PVC Instrumentation Cable, Armoured (Screened Cable) Copper Cable with glands/ lugs/ferrules :2P X 0.5 Sq mm screened cable KM 2.5

SE57 C) Copper PVC Instrumentation Cable, Armoured (Screened Cable) Copper Cable with glands/ lugs/ferrules :4P X 0.5 Sq mm screened cable KM 2

SE58 11 kV Switchgear:- 1) 11kV, 31.5KA, Metal Clad VCB Switchgear,2000A for 1 Incomer & 1250A for feeders (2I/C+1BC+20F+1AP+4CB) SAS compatible as per tchnical specification. Annunciator panel shall be simplex panel instead of desk type mentioned elsewhere in specification. Note: 1. The Remote Announciation cum Control panel is Simplex type. 2. The Electronic Trivector meters shall be as per technical specifications. 3.The switchgear for capacitor bank shall have necessary Over voltage / Under voltage / Circulating current relays and other protection relays as per specification. 4. The Switchgears Suitable for 31.5MVA,66/11kV Power Transformers. 5. The Switchgear will be supplied by KPTCL and the Bidder has to quote for complete scope of erection of Switchgear including moving the Switchgear from the point of unloading to the point of erection, erection of the complete Switchgear, wiring of Switchgear, testing & commissioning etc., complete. Set 1

SE59 11kV XLPE insulated UG Cable as per Technical specifications: a) 11 kV XLPE, 95 Sq mm Aluminium cable- 3 core (for 2 Auxiliary transformers from the 11KV switchgear) Mtrs 200

SE60 b) 11 kV XLPE cable, 1000 Sq. mm Aluminium cable- 3 Runs per phase of 1CX1000 Sq.mm cable from 66/11KV Transformers to 11KV Switchgear. Mtrs 1500

SE61 c) 11 kV XLPE cable, 400 Sq. mm Aluminium cable- 3 core to be run from 11KV Switchgear to 11KV take off DP structure & 11KV Capacitor Bank. Mtrs 2500

SE62 Cable Termination Kit suitable for following sizes as per Technical specifications: A. Indoor type: a) Heat shrinkable type Cable termination kits suitable for 1C x 1000 Sq.mm XLPE cable Nos 24

SE63 b) Heat shrinkable type Cable termination kits suitable for 3C x 400 Sq.mm XLPE cable Nos 24

SE64 c) Heat shrinkable type Cable termination kits suitable for 3C x 95 Sq. mm XLPE cable Nos 4

SE65 B. Outdoor type: a) Heat shrinkable type Cable termination kits suitable for 1Cx 1000 Sq.mm XLPE cable Nos 24

SE66 b) Heat shrinkable type Cable termination kits suitable for 3Cx 400 Sq.mm XLPE cable Nos 24

SE67 11kV Isolators & DP structure: 1) 11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR for IP Feeders Set 4

SE68 2) 11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Twon and Industrial Feeders Set 14

SE69 3) Supply of DB Isolator, 400A, 25kA with LA with Lattice Type Mounting structure (for Capacitor Bank) Set 4

SE70 4) Supply of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A SIngle Break Isolators and 9 kV, 10 KA surge arrestor (3 No.) complete set for outgoing feeders ( above Sl no 1,2,3) Set 22

SE71 5) 9 kV, 10 KA surge arrestor with connector and clamp Nos 54

SE72 6) Supply of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector meter complete set with all accessories for auxilliary transformer. Set 2

SE73 SDH EQUIPMENT: 1) (STM-16 MADM UPTO 3 MSP PROTECTED DIRECTIONS)-BASE EQUIPMENT (COMMON CARDS, CROSS CONNECT/CONTROL CARDS,OPTICAL BASECARDS,POWER SUPPLY CARDS, POWER CABLING, OTHER HARDWARE AND ACCESSORIES INCLUDING SUB RACKS PATCH CORD, DDF ETC FULLY EQUIPPED EXCLUDING OPTICAL INTERFACE & TRIBUTARY CARDS. NOTE: STM-16 equipment supplied under the subject work shall be of same make and model as supplied for KPTCL FOTE under relisble communication OPGW project of KPTCL and to be integrated to NMS-OPGW of KPTCL Nos 1

SE74 2) TRIBUTARY INTERFACE i) Cabinet Equipment to house SDH Equipment + Optical cards + Tributary Cards, Drop/Insert MUX Equipments and DACS Equipment Set 1

SE75 ii) 220V DC to 48V DC CONVERTER for SDH equipment Nos 1

SE76 iii) Routers for change over between OFC & VSAT communication for SCADA Data Note: The FOTE to be integrated to existing NMS provided at SLDC KPTCL Nos 1

SE77 Earth Mat formation : 1) Supplying and laying of MS.Flat 75 x 12 mm flat welding and applying ACB paint to welded portion (without Sodium Bentonite clay) as per drawing/standards, if required (all other materials to be supplied by contractor). MTR 13399

SE78 2) Supplying and Grounding of equipment with 75 X 12 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connecting by welding (inclusive of all T&P and consumables) to the earthmat/ground pit/point of earth connection, all the materials supplied by the contractor. MTR 2500

SE79 3) Providing 40mm dia M.S.Rod 1.075m long earthmat spikes including heating, bending top 50/75mm overlap flattening and making spike edge at one end driving into the earth below the ground level and welding the rod with ground mat flat with necessary earth work. Nos 250

SE80 4) Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron welding electrodes as per drawing including the cost of excavation (All materials to be supplied by the contractor) Set 56

SE81 5) Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc., Nos 56

SE82 Erection /Laying 66kV EHV UG Cable Laying including testing and commissioning : 1)Laying of 66KV single core, 1000sqmm XLPE Segmental compact type miliken Copper cable in trefoil, tapping , fixing pipes for drain and gate crossing as per drawings & specifications in trench pipes, ducts by pulling, drawing etc., including transport, handling of cable drums, paving out cables using standard cable installation equipments and as per directions of the engineer incharge. Note: One circuit consist of 3 Nos of single core cable and the quoted rate per Ckt Km shall also include the charges for transportaion of cable drums, materials, equipment to site etc., Ckt Km 2.1

SE83 2)Handling & making of cables end termination for 66KV power cables with all consuambles at site etc., complete. Nos 36

SE84 3)Erection of single phase earth link boxes, on to the cable end termination structure connecting earth leads with all lugs, fixtures, clamps, bolts, and nuts complete. Nos 18

SE85 4)Laying of 48 fibre dual window mono mode (DWMM) optical fibre cable as per drawings & specifications KM 2.1

SE86 5)Handling & making straight through joints closures for 24/ 48 fibre dual window mono mode ( DWMM) optical fibre cable Nos 4

SE87 6)Handling & making terminal joints for 48 fibre dual window mono mode ( DWMM) optical fibre cable Nos 2

SE88 7)Grounding of equipments by providing cast iron pipe of 100 mm ID 13mm thickness , 2.75 m long with 2 part clamp out of GI flat 50X6 mm as per drawing including the cost of excavation. (UNI Nos 18

SE89 8)Supplying & Providing 450mm dia 450mm height 1.5" to 2' thich hume pipe collar (non pressure type) for eatrth pits including all leads and lifts etc., (UNI SR 2023-24 Pg No. 124, item 26.i) Nos 18

SE90 A) Dismantling of Station and Equipment Structures 1) 3T1 Towers - 20 Nos t 5.11

SE91 2) 3B1 Beams - 19 Nos t 2.5802

SE92 3) 66kV, LA Structures - 21 Nos t 11.76

SE93 4) 66kV, Isolator Structures - 14 Nos t 4.655

SE94 5) 66kV CT/NCT Structures - 23 Nos t 2.4311

SE95 6) 66kV PT Structures -3 Nos t 0.3633

SE96 7) 66kV PI Structures/Poles - 11 Nos t 1.1011

SE97 8) 11kV DP Structures - 19 Nos t 1.33

SE98 B) Dismantling of Station Equipments: 1) 66kV CT's & NCT Nos 38

SE99 2) 66kV PT's Nos 3

SE100 3) 66kV Isolator's Nos 14

SE101 4) 66kV LA's Nos 21

SE102 5) 66kV CB's Nos 7

SE103 6) 11kV Switcgears (2I/c+17F+1BC+2CB) Set 1

SE104 7) 66/11kV Transformer C & R Panel Nos 2

SE105 8) 66kV Line C & R Panel Nos 5

SE106 9) Battery Charger Nos 1

SE107 10) Battery Set Nos 1

SE108 11) DCDB Nos 1

SE109 12) ACDB Nos 1

SE110 13) RTU & DCU panel Nos 1

SE111 14) 11kV Anounciator Panel Nos 2

SE112 15) 100KVA Auxiliary Transformer Nos 1

SE113 16) 11kV Poles Nos 38

SE114 17) 11kV Capacitor Bank with Structures Nos 2

SE115 C) Dismantling of Control Cables: 1) 19Cx2.5Sqmm Mtrs 200

SE116 2) 4Cx6Sqmm Mtrs 280

SE117 3) 4x2.5Sqmm Mtrs 100

SE118 4) 2Cx6Sqmm Mtrs 50

SE119 D) Dismantling of Power Cables: 1) 1Cx1000Sqmm Mtrs 280

SE120 2) 3Cx240Sqmm Mtrs 532

SE121 3) 3Cx95Sqmm Mtrs 50

SE122 E) Dismantling of existing Bus Bar with Drake/Coyote ACSR conductor Nos 1

1.Any clarifications / hard copy of drawings can be obtained from the office of the Chief Engineer Electricity, Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru

2.The Erection charges shall include transportation to site, loading and unloading.

3.Released materials/Dismantled(if any) shall be transported to the nearest KPTCL Projects Division Stores without any additional cost as per the directions of the Engineer in charge of the work.

4.In accordance with Circular No. KPTCL/B19/345/84-85 dated 23.02.2024, the Contract Agency has to submit all the required survey data in GIS mapping format before submission of the final bills in the event of award as per the Annexure – XIX and in case of additions/modifications/re-routing of existing Transmission lines, the modified survey details in GIS mapping format shall be submitted by the Contract Agency to the respective Chief Engineers/Executive Engineers of Transmission Zones as and when the works are executed.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 3B(ia) :-Price Breakup for-Line Supply portion (OH)

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Bidder's Name & Address alongwith GSTIN no. :

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

Sl.No Name of the Equipment/Materials Unit Quantity Unit Weights of towers in tonne (T) Total Weight of Towers in tonne (T) Indicate whether "Own manufactured Item" or "Bought Out Item" Indicate country of Origin

220kV SC Line (B2 Line to Hirehalli 220kV) 66kV SC Line ( 220kV Hirehalli to 66kV Honnudike) Strengthning ( 66kV Hirehalli-Urdigere-Dabaspet Line) Total Quantity HT MS Bolts & Nuts HT MS Bolts & Nuts

TOWERS: Fabrication, Proto Type Inspection and Supply of galvanised 220kV & 110kV Towers,Bolts & Nuts as per Technical Specification. Note : Rate to be quoted as per tonne basis. I) 220 kV Double Circuit NB Towers with Design Code- KPTCL-2D-NB-NRS) A) Tower type 220kV 'DB/DE' a) 220kV Normal Tower No/t 3 3 4.32500 6.35100 0.40400 12.97500 19.05300 1.21200

c) Stub for Normal Tower,+3 mtr +6 Mtr extension towers No/t 3 3 1.27100 0.10000 0.00200 3.81300 0.30000 0.00600

II) 220 kV Towers with Design Code-MC Cable Terminating Tower (CTT) a) 220kV Normal CTT Tower No/t 1 1 23.17876 6.73275 1.60260 23.17876 6.73275 1.60260

III) 220 kV Multi Circuit NB Towers with Design Code- KPTCL-2M-NB-NEWDHP) A) Tower type 220kV NB MB a) 220kV Normal Tower No/t 2 2 12.05965 4.92545 0.66896 24.11930 9.85090 1.33791

c) Stub for Normal Tower,+3 mtr +6 Mtr extension towers No/t 2 2 1.27600 0.00000 0.03110 2.55200 0.00000 0.06221

B) Tower type 220kV NB MD a) 220kV Normal Tower No/t 3 3 20.73747 6.09341 1.06503 62.21242 18.28022 3.19509

c) Stub for Normal Tower,+3 mtr +6 Mtr extension towers No/t 3 3 2.34676 0.00000 0.05036 7.04028 0.00000 0.15108

IV) 110 kV DC Narrow Based Towers with Design Code- KPTCL-1D-NB A) Tower type 110kV DC 'A' a) 110kV Normal Tower No/t 6 6 2.81294 0.20720 0.00000 16.87764 1.24320

b)+3mtr Body Extension only No/t 3 3 0.42204 0.01972 0.00000 1.26611 0.05916

c)+6mtr Body Extension only No/t 3 3 0.81695 0.03620 0.00000 2.45084 0.10860

d) Stub for Normal Tower,+3 mtr +6 Mtr extension towers No/t 6 6 0.20100 0.00000 0.00000 1.20600 0.00000

B) Tower type 110kV DC 'C' a) 110kV Normal Tower No/t 3 3 4.86896 0.28400 0.00000 14.60688 0.85200

b)+3mtr Body Extension only No/t 2 2 0.77267 0.03750 0.00000 1.54533 0.07500

c)+6mtr Body Extension only No/t 1 1 1.51737 0.07120 0.00000 1.51737 0.07120

d) Stub for Normal Tower,+3 mtr +6 Mtr extension towers No/t 3 3 0.50282 0.00000 0.00000 1.50846 0.00000

C) Tower type 110kV DC 'D' a) 110kV Normal Tower No/t 5 5 6.29700 0.24847 0.00000 31.48500 1.24237

b)+3mtr Body Extension only No/t 2 2 0.983 0.023 0.000 1.966 0.046

c) Stub for Normal Tower,+3 mtr +6 Mtr extension towers No/t 5 5 0.610289 0 0.000 3.051 0.000

V) 110 kV Towers with Design Code-DC Cable Terminating Tower (CTT) a) 110kV Normal CTT Tower No/t 3 3 8.408299 0.331985 0.000 25.225 0.996

b) Stub for Normal CTT Tower No/t 3 3 0.610701 0 0.000 1.832 0.000

VI) 66 kV DC Towers with Design Code- KPTCL-6D-NGML A) Tower type 66kV DC 'A' a) 66kV Normal Tower No/t 1 1 1.14500 1.24 0.17036 1.145 1.240 0.170

b) Stub for Normal Tower,+3 mtr +6 Mtr extension towers No/t 1 1 0.10480 0.00000 0.00160 0.105 0.000 0.002

B) Tower type 66kV DC 'B' a) 66kV Normal Tower No/t 2 2 1.62050 1.02024 0.17710 3.241 2.040 0.354

b) Stub for Normal Tower,+3 mtr +6 Mtr extension towers No/t 2 2 0.14432 0.00000 0.00319 0.289 0.000 0.006

VII) 66 kV DC Towers with Design Code- KPTCL-6D-NB A) Tower type 66kV DC 'C' a) 66kV Normal Tower No/t 10 10 0.00000 2.71000 0.16500 0.000 27.100 1.650

b)+3mtr Body Extension only No/t 4 4 0.00000 0.58300 0.03500 0.000 2.332 0.140

c)+6mtr Body Extension only No/t 5 5 0.00000 1.13200 0.07000 0.000 5.660 0.350

d) Stub for Normal Tower,+3 mtr +6 Mtr extension towers No/t 10 10 0.00000 0.41800 0.00000 0.000 4.180 0.000

VIII) 110 kV DC Towers with Design Code- KPTCL-1D-NB A) Tower type 110kV DC 'D' a) 110kV Normal Tower No/t 1 1 0.00000 6.29700 0.24847 0.000 6.297 0.248

b)+9mtr Body Extension only No/t 1 1 0 3.47407 0.13123 0.000 3.474 0.131

c) Stub for Normal Tower,+9 mtr extension towers No/t 1 1 0 0.745 0 0.000 0.745 0.000

IX) 110 kV Towers with Design Code-DC Cable Terminating Tower (CTT) a) 110kV Normal CTT Tower No/t 1 1 8.408299 0.331985 0.000 8.408 0.332

b) Stub for Normal CTT Tower No/t 1 1 0.610701 0 0.000 0.611 0.000

LS1 Total weight of the Towers (High Tensile Steel) excluding Bolt & Nuts. (220 kV Towers) Note : Rate to be quoted as per tonne basis. t 147.1142 147.1142

LS2 Total weight of the Towers (Mild Steel) excluding Bolt & Nuts. (220 kV Towers) Note : Rate to be quoted as per tonne basis. t 57.0012 57.0012

LS3 Total weight of the Bolt & Nuts. (220 kV Towers) Note : Rate to be quoted as per tonne basis. t 8.2194 8.2194

LS4 Total weight of the Towers (High Tensile Steel) excluding Bolt & Nuts. (110 kV Towers) Note : Rate to be quoted as per tonne basis. t 0 4.7794 4.7794

LS5 Total weight of the Towers (Mild Steel) excluding Bolt & Nuts. (110 kV Towers) Note : Rate to be quoted as per tonne basis. t 104.5381 62.0876 166.6257

LS6 Total weight of the Bolt & Nuts. (110 kV Towers) Note : Rate to be quoted as per tonne basis. t 4.6935 3.3842 8.0777

LS7 Tower Accessories: 1) Number Plates Nos 9 17 15 41

LS8 2) Danger Board Nos 9 17 15 41

LS9 3) Circuit Plates Nos 28 34 15 77

LS10 4) Phase Plates (Set of 3 Nos.) Set 28 34 15 77

LS11 5) Earth Bonds 300mm long Nos 0 6 1 7

LS12 6) Earth Bonds 450mm long Nos 9 11 14 34

LS13 Conductors: i)High Performance Conductor (HPC) of Ampacity-1400A for new Transmission lines with new towers/Supports Plain Terrian (1.5% sag) (805 mtrs for new line and 244+65+91mtrs for replacing existing conductors of B1 & for B2 Line) KM 7.3384 7.3384

LS14 ii) Coyote ACSR Conductor with 1.5% Sag KM 20.505 20.505

LS15 iii) High Performance Conductor (HPC) of Ampacity-700A for Existing Towers with 1.5% sag KM 136.145 136.145

LS16 iv)7/3.15mm Ground wire with 1.5% Sag KM 0.1 1 1.1

LS17 I) Insulators Strings suitable for HPC Conductor as per technical specifications. NOTE: All the Insulator strings and hardware fittings quoted by the bidder shall be of the same type i.e. all the Insulator strings and hardware fittings shall be of Disc Insulators type OR all the Insulator strings and hardware fittings shall be of Polymeric Composite Insulators type OR all the Insulator strings and hardware fittings shall be of porcelain Long rod insulator. Bidder shall quote either for Disc Insulators type OR for Composite Insulators type OR for Long rod insulator and not for all the types. A. Tension insulator strings consisting of any one of the following: a. Insulator strings consisting of 1X16nos. of 220kV, 120kN Disc insulators. OR b. Porcelain long rod insulator string equivalent to 1X16nos. of 220kV, 120kN Disc insulators. OR c. Single Unit of 220kV, 120kN Silicon rubber composite insulator with sectional length-2175mm Stack 126 126

LS18 Insulator Hardwares & Clamps suitable for HPC Conductor as per Technical Specification: i) Single Tension Clamp with hardware and arcing horn suitable for 1x16nos. of 220kV, 120kN insulator to suit HPC Conductor. Nos 102 102

LS19 ii)Double Tension Clamp with hardware and arcing horn suitable for 2x16nos. of 220kV, 120kN insulator to suit HPC Conductor. Nos 12 12

LS20 II) Insulators Strings suitable for Drake Conductor as per technical specifications. NOTE: All the Insulator strings and hardware fittings quoted by the bidder shall be of the same type i.e. all the Insulator strings and hardware fittings shall be of Disc Insulators type OR all the Insulator strings and hardware fittings shall be of Polymeric Composite Insulators type OR all the Insulator strings and hardware fittings shall be of porcelain Long rod insulator. Bidder shall quote either for Disc Insulators type OR for Composite Insulators type OR for Long rod insulator and not for all the types. A. Tension insulator strings consisting of any one of the following: a. Insulator strings consisting of 1X16nos. of 220kV, 120kN Disc insulators. OR b. Porcelain long rod insulator string equivalent to 1X16nos. of 220kV, 120kN Disc insulators. OR c. Single Unit of 220kV, 120kN Silicon rubber composite insulator with sectional length-2175mm Stack 6 6

LS21 Insulator Hardwares & Clamps suitable for Drake Conductor as per Technical Specification: i) Single Tension Clamp with hardware and arcing horn suitable for 1x16nos. of 220kV, 120kN insulator to suit Drake Conductor. Nos 6 6

LS22 III) Insulator strings suitable for COYOTE ACSR conductor as per technical specifications: A. Tension insulator strings consisting of any one of the following: a. Insulator string consisting of 1X8nos. of 110kV, 90kN Disc insulators. OR b. Porcelain long rod insulator string equivalent to 1X8nos. of 110kV, 90kN Disc insulators. OR c. Silicon rubber composite insulator equivalent to 1X8nos. of 110kV, 90kN Disc insulators (sectional length-1160mm) Stack 186 186

LS23 B. Suspension insulator strings consisting of any one of the following: for COYOTE ACSR a. Insulator string consisting of 1X7nos. of 110kV, 90kN Disc insulators. OR b. Porcelain long rod insulator string equivalent to 1X7nos. of 110kV, 90kN Disc insulators. OR c. Silicon rubber composite insulator equivalent to 1X7nos. of 110kV, 90kN Disc insulators (sectional length-1015mm) NOTE: All the Insulator strings and hardware fittings quoted by the bidder shall be of the same type i.e. all the Insulator strings and hardware fittings shall be of Disc Insulators type OR all the Insulator strings and hardware fittings shall be of Polymeric Composite Insulators type OR all the Insulator strings and hardware fittings shall be of Long rod insulator. Bidder shall quote either for Disc Insulators type OR for Composite Insulators type OR for Long rod insulator and not for all the types. Stack 36 36

LS24 Insulator Hardwares & Clamps suitable for COYOTE ACSR Conductor as per Technical Specification: i) Single Tension Clamp with hardware and arcing horn suitable for 1x8nos. of 110kV, 90kN insulator to suit COYOTE ACSR. Nos 156 156

LS25 ii) Double Tension Clamp with hardware and arcing horn suitable for 2x8nos. of 110kV, 90kN insulator to suit COYOTE ACSR. Nos 15 15

LS26 iii) Single Suspension Clamp with hardware and arcing horn suitable for 1x7nos. of 110kV, 90kN insulator to suit COYOTE ACSR. Nos 36 36

LS27 IV)Insulator Strings with Arcing Horns for HPC: 66kV line NOTE: All the Insulator strings quoted by the bidder shall be of the same type i.e. all the Insulator strings shall be of Disc Insulators type OR all the Insulator strings shall be of Polymeric Composite Insulators type OR all the Insulator strings shall be of Long rod insulator. Bidder shall quote either for Disc Insulators type OR for Composite Insulators type OR for Long rod insulator and not for all the types. A. Tension insulator strings consisting of any one of the following: a. Insulator string consisting of 1X8nos. of 90kN Disc insulators Or b. Porcelain long rod insulator string equivalent to 1x8nos. of 90kN Disc insulators Or c. single unit of 110kV 90kN Silicon Rubber composite insulators equivalent to 1X8nos. of 90kN Disc insulators Stack 1056 1056

LS28 B.Suspension insulator strings consisting of any one of the following: a. Insulator string consisting of 1X7nos. of 90kN Disc insulators Or b. Porcelain long rod insulator string equivalent to 1x7nos. of 90kN Disc insulators Or c. single unit of 66kV 90kN Silicon Rubber composite insulators equivalent to 1X7nos. of 90kN Disc insulators Stack 288 288

LS29 Insulator Hardware for HPC on Existing Towers A.Single Tension Clamp with hardware and arcing horn suitable for 1x8nos. of 90kN insulator to suit HPC Existing Tower Nos 612 612

LS30 B.Double Tension clamp with hard ware and arcing horn suitable for 2x8nos. of 90kN insulator to suit HPC Existing Tower Nos 222 222

LS31 C. Single suspension Clamp with hardware and arcing horn suitable for 1x7nos. of 90kN insulator to suit HPC Existing Tower Nos 180 180

LS32 D. Double suspension Clamp with hardware and arcing horn suitable for 2x7nos. of 90kN insulator to suit HPC Existing Tower Nos 54 54

LS33 ACCESSORIES for HPC Conductor 1400A, New Lines a) Mid span compression joint (for HPC Conductor 1400A, New Lines) Nos 10 10

LS34 b) Repair sleeves (for HPC Conductor 1400A, New Lines) Nos 10 10

LS35 c) Vibration Dampers (for HPC Conductor 1400A, New Lines) Nos 114 114

LS36 d) T Clamp (for HPC Conductor 1400A, New Lines) Nos 6 6

LS37 e) Dead End Clamp (for HPC Conductor 1400A, New Lines) Nos 114 114

LS38 ACCESSORIES for DRAKE ACSR Conductor a) Mid span compression joint (for Drake ACSR) Nos 4 4

LS39 b) Repair sleeves (for Drake ACSR) Nos 4 4

LS40 c) Vibration Dampers (for Drake ACSR) Nos 6 6

LS41 ACCESSORIES for COYOTE ACSR Conductor a) Mid span compression joint (for Coyote ACSR) Nos 20 20

LS42 b) Repair sleeves (for Coyote ACSR) Nos 10 10

LS43 c) PG Clamps (for Coyote ACSR) Nos 171 171

LS44 d) Vibration Dampers (for Coyote ACSR) Nos 207 207

LS45 e) Pre formed armour rods (For Coyote ACSR) Nos 36 36

LS46 ACCESSORIES for HPC Conductor 700A, Existing Towers a) Mid span compression joint (for HPC Conductor 700A, existing Towers) Nos 80 80

LS47 b) Repair sleeves (for HPC Conductor 700A, existing Towers) Nos 40 40

LS48 c) Vibration Dampers (for HPC Conductor 700A, existing Towers) Nos 1344 1344

LS49 d) T Clamp (for HPC Conductor 700A, existing Towers) Nos 30 30

LS50 e) Pre Formed armour Rods (for HPC Conductor 700A, existing Towers) Nos 243 243

LS51 III) Hardware & Accessories suitable for Ground Wire. a) M S C Joints (for Ground Wire) Nos 10 20 30

LS52 b) Repair sleeves (for Ground Wire) Nos 10 30 40

LS53 c) P G Clamps (for Ground Wire) Nos 23 31 54

LS54 d) Single Tension clamps (Compression type) Nos 23 28 51

LS55 e) Single Suspension clamps (bolted type) (for Ground Wire) Nos 6 6

LS56 OPGW A) OPGW cable & Accessories as per technical specifications: 1.48 Fibre (DWSM) OPGW fibre optic cable for 220kV LILO line ( inclusive of conductor offline stringing). KM 1 11.69 12.69

LS57 2.Suspension Clamp Assembly for 48 fibre OPGW Nos 1 26 27

LS58 3.Tension Assembly for dead end for 48 fibre OPGW Set 2 2 4

LS59 4.Tension fitting Assembly for 48 fibre OPGW including all accessories for joint box (splicing location) Nos 1 4 5

LS60 5.Tension Assembly -Double Tension pass through for 48 fibre OPGW Nos 8 24 32

LS61 6.Tension fiiting Assembly on suspension tower for 48 fibre OPGW including all accessories for joint box (splicing location) Nos 1 1 2

LS62 7.Vibration dampers for 48 fibre OPGW Nos 18 108 126

LS63 8.Down lead clamp assembly for 48 fibre OPGW Nos 29 93 122

LS64 9.Joint box for 48 fibre OPGW Nos 3 6 9

LS65 B) FODP 48F: Indoor type (rack mounted with FCPC coupling and pigtails to house LIU) as per technical specifications Nos 1 1 2

LS66 C) Fibre Optic Approach Cable: 48 Fibre (DWSM) -Including installation hardware set for 48 fibre approach cable as per technical specifications. KM 0.5 0.5 1

1. Any clarifications / hard copy of drawings can be obtained from the office of the Chief Engineer Electricity, Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru .

2. Spacers shall be provided wherever necessary and no extra charges is payable on account of the same by KPTCL.

3. Supply of equipment/materials shall include transportation to the site, loading and unloading.

4. The Bidder shall quote same rates for common materials in all the Percentage-Wise Financial Bid Offer.

5. The Bidders shall start the line work from both the ends simultaneously by deploying more number of gangs as the ‘ROW’ issues which may crop-up can be addressed in parallel on both segments. The bidders shall take note of the same before quoting.

6. The Bidder shall take necessary action to ensure that all the materials supplied shall be properly housed to ensure satisfactory commissioning.

7. The Prices for all the materials shall be quoted in the Percentage wise finanacial bid.

8. The Bidder shall clearly indicate whether the materials/equipments are “Own manufactured” or “Bought out item”.

9. Released materials/Dismantled(if any) shall be transported to the nearest KPTCL Projects Division Stores without any additional cost as per the directions of the Engineer in charge of the work.

It shall be noted that, the total ceiling weight of towers and tower foundation volumes indicated in the Techno-commercial sheets and ‘Percentagewise Financial offer’ in KPP portal shall be the same. In case any discrepancies is noticed between total ceiling weight of towers and tower foundation volumes indicated in ‘Percentage wise Financial offer’ and Techno-commercial sheets, the total ceiling weight of towers and tower foundation volumes indicated in KPP portal shall be considered for Price evaluation.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 3B(ib) :-Price Breakup for-UG Cable Supply portion

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Bidder's Name & Address alongwith GSTIN no. :

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

Sl.No Name of the Equipment/Materials Unit Quantity Indicate whether "Own manufactured Item" or "Bought Out Item" Indicate country of Origin

66kV UG Cable ( 220kV Hirehalli to 66kV Honnudike)

UGS1 38/66 kV (Earthed), 1C X 1000 Sq mm stranded, annealed, copper conductor, segmental, compact, circular, (Milliken), conductor screen, cross linked polyethylene (XLPE) insulation, core screen, semiconducting water swellable layer, lead alloy 'E' sheathed, semi-conducting bedding tapes, helically applied plain round copper wire screen, plain copper tape in open helix, water swellable tape with overall extruded high density polyethylene sheath coated with graphite and anti-termite treated as per technical specification. (1.6+ 0.03 raising +0.02 loop)*3 = 4.95 Kms KM 4.95

UGS2 Normal Straight through Joint suitable for 66 kV, 1C X 1000 Sq mm, copper conductor, XLPE insulated, lead sheathed cable complete with all accessories as per technical specification. Nos 6

UGS3 Outdoor type cable end termination suitable for 66 kV, 1C X 1000 Sq mm segmental compact type miliken copper conductor, XLPE, lead sheathed cable as per technical specification. Nos 3

UGS4 Indoor type cable termination (plug in dry type) suitable for GIS modules confirming to IEC 62271-209 for 66 kV, 1000 Sq mm, copper conductor, XLPE insulated lead sheathed cable as per technical specification. Nos 3

UGS5 Single phase Link box outdoor structure mounting type, with SVL suitable for 110 kV & 66 kV, 1000/630/400/240 Sq mm UG cable including 240 Sq mm sheath bonding cable as per the technical specification. Nos 6

UGS6 Three phase cross bonding Link box with SVL including 240 Sq mm sheath bonding cable and 240/240 Sq mm co-axial cable as per technical specification suitable for 110 kV & 66 kV, 1000/630/400/240 Sq mm UG Cable. The Link box shall be burried type, water proof (capable of immerssion in water), weather proof, rust & dust proof (IP: 68) Cross bonding Link Box for 1Nos per Ckt: 1Nos. Straight Link Box 1Nos per Ckt: 2Nos. Nos 3

UGS7 Terminal connectors to connect cable end termination to the Coyote ACSR conductor/ Aluminium rigid pipe heavy type with bolts & nuts and washers, complete. Nos 3

UGS8 Surge Arrestor: 60 kV class III, Heavy duty Metal oxide type, porcelain housing gapless type with surge counter. Nos 3

UGS9 Optical fibre and its accessories 1) Unarmoured Underground FO cable (48 DWSM) KM 1.6

UGS10 2) Polyvinyl lubricated bond ( PLB) Pipe OD 40 mm KM 1.6

UGS11 3) Joint box OPGW- OFC Nos 1

UGS12 4) Joint box OFC Nos 1

UGS13 5) OFC End terminal (LIU suitable for 48F) Nos 1

UGS14 6) Media convertor Nos 2

NOTE: 1. Any clarifications / hard copy of drawings can be obtained from the office of Chief Engineer Electricity, Tendering & Procurement, KPTCL, Indhana Bhavan Bangalore.

2. Spacers shall be provided wherever necessary and no extra charges is payable on account of the same by KPTCL.

3. Supply of equipment/materials shall include loading and unloading.

4. The prices for all the materials shall be quoted in the Item wise finanacial bid.

5. Released materials shall be transported to the nearest Major Works Store of KPTCL without any additional cost as per the directions of the Engineer in charge of the work.

6. The bidder shall quote same rates for common materials in all the price sheets.

7. The Bidder shall clearly indicate whether the materials/equipments of subject work are “Own manufactured” or “Bought out item”.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 3B(iia) :-Line Erection Portion (OH)

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Bidder's Name & Address alongwith GSTIN no. :

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

Sl. No. Name of the Equipment/Materials Unit Quantity

220kV SC Line (B2 Line to Hirehalli 220kV) 66kV SC Line ( 220kV Hirehalli to 66kV Honnudike) Strengthning ( 66kV Hirehalli-Urdigere-Dabaspet Line) Total Quantity

LE1 Check Survey and Towers Spotting. Check survey using their own equipment for 220kV Plain terrain KM 1.729 0 0 1.7290

LE2 Check Survey and Towers Spotting. Check survey using their own equipment for 100kV Plain terrain Note: 1.The survey covers the scope as defined in Technical Specifications & As per volume VI of Common UNI SR 2023-24 & Tender Documents. 2.In accordance with Circular No. KPTCL/B19/345/84-85 dated 23.02.2024, the Contract Agency has to submit all the required survey data in GIS mapping format before submission of the final bills in the event of award as per the Annexure XIX and in case of additions/modifications/re-routing of existing Transmission lines, the modified survey details in GIS mapping format shall be submitted by the Contract Agency to the respective Superintending Engineers/Executive Engineers, Projects, KPTCL as and when the works are executed. KM 3.867 43.101 46.9680

LE3 ii. Conducting Drone survey of Transmission Lines for collection of data along with Aeria linspection of EHV Line Corridor using LIADR method for measurement of Vertical, horizontal and ground clearances of the LT/HT/EHV/ P&T lines, major road/railway/river crossing, building, vegetations etc., which is found to cross or running in parallel with the KPTCL EHV lines and sag measurements and other works. The rates include to collect details such as, • Vegetation growth close to conductor along the width of corridor with measurements • Building/construction violation along the corridor with measurements • Clearance measurement of Roads/Railways. River crossings • Clearance measurement of EHV/Power line crossings (up and down) • Clearance measurements of tower elements (Hang point & Ground point measurement) • Sag measurement of each span of the line all phases • Location of tower (GPS coordinates), type of tower, height of tower, span length and conductor type • Angle of deviation of tower • Submission of detailed consolidated final report for surveying work done appending all the above details including all relevant information collected during survey certificates of the instruments used for the work, photos/videos taken at site and submitting soft copies and hard copy of all documents & reports in 3 sets. Note: 1) The minimum requirement of LiDAR camera is as follows point cloud with RGB mapping Accuracy of +/-25cm ability to gather minimum of 75 points/sqmtr. 2) Patrolling shall at least cover the minimum corridor area as per the voltage classes. KM 1.729 3.867 43.101 48.6970

LE4 Stringing of Conductor without allowing the conductor to touch the ground and without damaging the conductor as per specifications. Paving out conductor from anchor to anchor normally spaced at 5 spans with 4 tangent towers in between, including providing stays at each anchor points and jointing of conductors, hoisting and fixing of insulator string along with conductor accessories, armour rods, vibration dampers, including the cost of T&P materials like comealong, wire ropes, pulley, rollers, suspension clamps, compression jointing machines with bits, drum stands, manila ropes, truckker and jeep etc., Note :- The tenderers are required to quote the rates taking into consideration the charges for loading and unloading of ACSR conductor/Ground Wire, Insulators and Hardwares. 1.High Performance Conductor (HPC) of Ampacity-1400A for new Transmission lines with new towers/Supports Plain Terrian (1.5% sag) KM 7.338 7.3384

LE5 2. Coyote ACSR Conductor Plain Terrian KM 20.505 20.505

LE6 3. High Performance Conductor (HPC) of Ampacity-700A for Existing Towers with 1.5% sag KM 136.145 136.145

LE7 4. 7/3.15 mm GI Ground wire Plain Terrian for 110kV line KM 0.100 1.000 1.100

LE8 Erection of 220kV Transmission Line Towers (including tower accessories etc., except GI angle, Barbed wire & Grounding materials) as per specifications. Note: 1.The Bidders are required to quote the rates taking into consideration of the charges for sorting of towers, loading, unloading, stub setting, aligning, dismantling & transportation of templates from one location to another and tack welding etc., 2. For split up details refer techno commercial sheet (Line supply). 3. The rates quoted shall be on tonne basis. t 212.3348 0.0000 212.3348

LE9 Erection of 110kV Transmission Line Towers (including tower accessories etc., except GI angle, Barbed wire & Grounding materials) as per specifications. Note: 1.The Bidders are required to quote the rates taking into consideration of the charges for sorting of towers, loading, unloading, stub setting, aligning, dismantling & transportation of templates from one location to another and tack welding etc., 2. For split up details refer techno commercial sheet (Line supply). 3. The rates quoted shall be on tonne basis. t 109.2316 70.2512 179.4828

LE10 Supplying and fixing AC devices: i) Supplying and fixing GI angle iron 45 x 45x5mm (1Mtr length) with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner and outer surface of tower to facilitate running of barbed wire AC device. Set 9 17 15 41

LE11 ii) Supplying and fixing Barbed wire as per specifications. Mtrs 1322 1480.32 1157.02 3959.3400

LE12 Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation charges. Set 9 17 15 41

LE13 OPGW cable & accessories: 1) Installation, testing & commissioning of 48F OPGW cable along with associated hardware fittings as per technical pecification for OFFLINE condition KM 1.000 11.69 12.6900

LE14 2)Joint box for 48 fibre OPGW Nos 3 6 9

LE15 3) FODP 48 F: Indoor type rack mounted with FCPC coupling & pigtails to house LIU). Nos 1 1 2

LE16 4) Fibre Optic Approach cable: 48 fibre(DWSM)-including installation hardware set for 48 fibre approach cable KM 0.500 0.500 1.000

LE17 5) Releasing & Restringing of single span of OPGW wire from existing 220kV B1-B2 Line Mtrs 0.924 0.924

LE18 Releasing & Restringing of existing HPC/Drake ACSR conductor on existing Tower of 220kV B2 Line 310+214mtrs (6 Conductors) KM 3.144 3.144

LE19 Dismantling Portion: Note : 1) The Released materials shall be transported to the nearest Stores(Operations) of KPTCL. 2)The rates quoted for releasing/dismantling shall also include the charges for loading, transportation to KPTCL stores and unloading. 3) Before Commencing the dismantling Work, Items wise Inventory of the Equipments / Materials to be Dismantled are to be prepared jointly with the Engineer In-Charge, which is to be got approved by the respective Superintending Engineer (Elec), Projects, KPTCL. 4) Quantity mentioned here is indicative payment will be made as per actuals. Dismantling of existing super structure/tower materials 1. Dismantling of Existing Towers/Conductor in existing corridor of 220kV B1 and B2 Line i) Dismantling of existing structure /tower materials Tower type 220kV DA 3.28 MT per tower t 3.28 3.280

LE20 ii) Dismantling of existing structure /tower materials Tower type 220kV DB 4.68 MT per tower t 4.68 4.6800

LE21 iii) Releasing of HPC conductor in the existing line B1 (244+65+91 mtrs KM 1.2 1.2000

LE22 iv) Releasing of Drake ACSR conductor in the existing line B2 (244+65+91 mtrs KM 1.2 1.2000

LE23 2. Dismantling of existing towers / conductor in the existing corridor of 66kV Hirehalli-Brindavan & Hirehalli-Honnudike Common Corridor Line to Hirehalli Substation. i) Dismantling of existing structure /tower materials Tower type 110kV DA (1.82 MT per tower) t 1.82 1.8200

LE24 ii) Dismantling of existing structure /tower materials Tower type 110kV DA+3 (2.15 MT per tower) t 2.15 2.1500

LE25 iii) Dismantling of existing structure /tower materials Tower type 110kV DB (3.11 MT per tower) t 3.11 3.1100

LE26 iv) Dismantling of existing structure /tower materials Tower type 110kV DD (4.31 MT per tower) t 4.31 4.3100

LE27 v) Releasing of Coyote ACSR conductor in the existing line KM 4.41 4.4100

LE28 vi) Releasing of Ground wire in the existing line KM 0.735 0.7350

LE29 3. Dismantling of existing towers / conductor in the existing corridor of 66kV SC Line from Honnudike Tap Point to LILO Point of Hirehalli Substation i) 110kV Tower Type - SA+0 -2No's (1.46 MT per tower ) t 2.92 2.9200

LE30 ii) 110kV Tower Type - SA+3 -2No's (1.8 MT per tower ) t 3.6 3.6000

LE31 iii) 110kV Tower Type - SB+0 -1No's (1.7 MT per tower ) t 1.7 1.7000

LE32 iv) 110kV Tower Type - SB+3 -3No's (2.092 MT per tower ) t 6.276 6.2760

LE33 v) 110kV Tower Type - SD+0 -1No's (2.84 MT per tower ) t 2.84 2.8400

LE34 vi) Releasing of ACSR Coyote conductor KM 10.101 10.1010

LE35 vii) Releasing of Ground conductor KM 11.367 11.3670

LE36 4. Dismantling of existing towers / conductor in the existing corridor 66kV SC Line from Hirehalli - Kolala, 66kV SC Line from Kolala to Hirehalli & 66kV LILO Line to Urdigere Substation i) Tower type 66kV SA Tower (1.00 MT per tower) t 5 5.0000

LE37 ii) Tower type 66kV SA+3 Tower (1.3 MT per tower) t 6.5 6.5000

LE38 iii) Releasing of Coyote ACSR conductor in the existing line of 66kV Hirehalli- Kolala Line KM 53.028 53.0280

LE39 iv) Releasing of Coyote ACSR conductor in the existing line of 66kV LILO Line to 66/11kV Urdigere substation KM 14.154 14.1540

LE40 v) Releasing of Coyote ACSR conductor in the existing line of 66kV Kolala-Dabaspete Line KM 66.951 66.9510

1. Any clarifications / hard copy of drawings can be obtained from the office of the Chief Engineer Electricity, Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru.

2. The Erection charges shall include transportation to site, loading and unloading.

3. Bidders shall start the line work from both the ends simultaneously by deploying more number of gangs as the ‘ROW’ issues which may crop-up can be addressed in parallel on both segments. The bidders shall take note of the same before quoting.

4. The charges for erection shall be quoted in the Percentage wise finanacial bid.

5. Released materials shall be transported to the nearest KPTCL Projects Division Stores as per technical specifications without any additional cost as per the directions of the Engineer in charge of the work.

6.In accordance with Circular No. KPTCL/B19/345/84-85 dated 23.02.2024, the Contract Agency has to submit all the required survey data in GIS mapping format before submission of the final bills in the event of award as per the Annexure – XIX and in case of additions/modifications/re-routing of existing Transmission lines, the modified survey details in GIS mapping format shall be submitted by the Contract Agency to the respective Chief Engineers/Executive Engineers of Transmission Zones as and when the works are executed.

7.The Bidder shall quote same rates for common materials in all the Percentage wise finanacial bid.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 3B(iib) :-Price Breakup for-UG Cable Erection portion

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Bidder's Name & Address alongwith GSTIN no. :

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

Sl.No Name of the Equipment/Materials Unit Quantity

66kV UG Cable ( 220kV Hirehalli to 66kV Honnudike)

UGE1 Surveying of cable route, excavation trial holes as per field requirements, preparation of cable route profile drawings for cable laying, final route alignment, marking lines and grades, preparation of final cable route drawings after laying and energising for preparing bill of materials for project, including Evaluation of soil thermal resitivity of soil along the cable route (as per Technical specification) and Evaluation of soil resistivity of soil along the cable route at ideally selected locations. KM 1.6

UGE2 Laying including testing and commissioning : Laying of 66KV single core, 1000sqmm XLPE Segmental compact type miliken Copper cable in trefoil, tapping , fixing pipes for drain and gate crossing as per drawings & specifications in trench pipes, ducts by pulling, drawing etc., including transport, handling of cable drums, paving out cables using standard cable installation equipments and as per directions of the engineer incharge. Note: One circuit consist of 3 Nos of single core cable and the quoted rate per Ckt Km shall also include the charges for transportaion of cable drums, materials, equipment to site etc., Ckt Km 1.6

UGE3 Handling & making normal straight joints for 66 KV power cables with all consuambles at site etc., complete. Nos 6

UGE4 Handling & making of cables end termination for 66KV power cables with all consuambles at site etc., complete. Nos 6

UGE5 Erection of single phase earth link boxes, on to the cable end termination structure connecting earth leads with all lugs, fixtures, clamps, bolts, and nuts complete. Nos 6

UGE6 Erection of three phase earth link boxes, buried type with all lugs, fixtures, clamps, bolts, and nuts complete. Nos 3

UGE7 Laying of 48 fibre dual window mono mode (DWSM) unarmored underground optical fibre cable as per drawings & specifications Ckt Km 1.6

UGE8 Polyvinyl lubricated bond ( PLB) Pipe OD 40 mm KM 1.6

UGE9 Joint box OPGW- OFC Nos 1

UGE10 Joint box OFC Nos 1

UGE11 OFC End terminal (LIU suitable for 48F) Nos 1

UGE12 Grounding of equipments by providing cast iron pipe of 100 mm ID 13mm thickness , 2.75 m long with 2 part clamp out of GI flat 50X6 mm as per drawing including the cost of excavation. Nos 2

UGE13 Supplying & Providing 450mm dia 450mm height 1.5" to 2' thich hume pipe collar (non pressure type) for eatrth pits including all leads and lifts etc., Nos 2

NOTE: 1. Any clarifications / hard copy of drawings can be obtained from the office of Chief Engineer Electricity, Tendering & Procurement, KPTCL, Indhana Bhavana Bangalore.

2. Spacers shall be provided wherever necessary and no extra charges is payable on account of the same by KPTCL.

3. Supply of equipment/materials shall include loading and unloading.

4. The prices for all the materials shall be quoted in the Item wise finanacial bid.

5. Released materials shall be transported to the nearest Major Works Store of KPTCL without any additional cost as per the directions of the Engineer in charge of the work.

6. The bidder shall quote same rates for common materials in all the price sheets.

7. The Bidder shall clearly indicate whether the materials/equipments of subject work are “Own manufactured” or “Bought out item”.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

Upgradation of existing 2x20MVA, 66/11kV Hirehalli sub station to 2x150 MVA, 220/66/11kV GIS Sub-station in Tumkur Taluk & District.

BIDDERS SHALL NOTE: FILL ONLY IN LIGHT BLUE COLOURED CELLS

Bidders Name and Address along with GSTIN No.: To

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavan, A.R.Circle, BANGALORE - 560009.

Sl. No. Specifications Unit Quantity

B1 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. cum 5970

B2 Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be recovered @ Rs. 60.00/m3) cum 2600

B3 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling, water,all materials,usage& all other appurtenaces required to complete the work. cum 3400

B4 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m cum 10304.89

B5 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth 3 m to 6m cum 998.4

B6 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth. cum 2119.37

B7 Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. Hard rock (blasting prohibited) Depth upto 1.50 m cum 706.46

B8 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates cum 1016.67

B9 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - For foundation (3% cosidered for Form work) cum 1221.47

B10 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- (10% considered for Form work) cum 780

B11 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20mm nominal size graded crushed coarse aggregate- ( 35% considered for Form work) cum 551.74

B12 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - For Plinth Beam (50% considered for Form work) cum 84.18

B13 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- For Columns pedestal & coluimn upto plinth beam Ground Floor (70% considered for Form work) cum 91.64

B14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- For Columns (70% considered for Form work) Ground Floor cum 76.21

B15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- For Columns (70% considered for Form work) at 3.6m to 6.6m level. cum 45.41

B16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- For Columns (70% considered for Form work) at 6.6m to 10.0m level. cum 38.12

B17 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Ground Floor (60% considered for Form work) cum 115.48

B18 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates First Floor corbel Beam (60% considered for Form work) cum 32.74

B19 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. First Floor (60% considered for Form work) cum 18.72

B20 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Chejjas & Canopy of CRB (45% considered for Form work) cum 17.92

B21 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - For Floor Concrete cum 198.66

B22 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Roof slab (50% considered for Form work) cum 231.7

B23 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates . (50% considered for Form work) Roof slab at First floor cum 33.88

B24 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates . (50% considered for Form work) Roof slab for 220kV GIS Hall cum 210.7

B25 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates cum 38

B26 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings kg 160689.06

B27 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures kg 136831.05

B28 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 76106.04

B29 Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom, toilet, balcony & utility area applied @ 2.2kg/m2 in 2 coats to achieve 1.2mm DFT, having Elongation at break greater than 120% as per ASTM D 412, Tensile strength greater than1N/mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification. sqm 1466.24

B30 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum 8143.6

B31 Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work cum 3543

B32 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in super structure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. cum 754.79

B33 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications sqm 909.24

B34 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. sqm 4252

B35 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. sqm 2217.9

B36 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. sqm 5682

B37 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. sqm 4964.65

B38 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. sqm 5319.65

B39 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 g/L as per specifications and as per directions of Engineer in charge. sqm 5319.65

B40 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. sqm 6363.67

B41 Providing Water based glossy paint (Green certified product) to Kerb Stones as per IS 164:2015 technical specifications including cleaning & surface preparation sqm 180

B42 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 L per 50 kg of cement or as per direction of Engineer incharge. sqm 1200

B43 Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire m 5400

B44 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). sqm 172

B45 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) sqm 87

B46 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge. 42x50 mm PVC Extruded section m 198

B47 30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (plus or minus 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30mm and 2 mm (plus or minus 0.2 mm), wall thickness. Fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (plus or minus 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in–charge. sqm 65

B48 Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge: With brass cover plate minimum 1.25 mm thickness including cost of materials, labour, usage charges of machinery complete as per specifications. no 15

B49 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per m2 including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all T sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer in Charge. sqm 355

B50 Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600 Upto 20 mm depth and 20 mm width including cost of materials, labour, usage charges of machinery complete as per specifications. m 862.4

B51 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. sqm 75.9

B52 Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. no 8

B53 Extra for providing Manually operated Bevel Gear Box for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. no 4

B54 Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. no 4

B55 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. sqm 269.93

B56 Providing and laying 5mm thick Self levelling Epoxy Flooring for Residential, Commercial, Sports & Industrial purpose made of reputed brand applied at 1L/m2 on existing Concrete substrate of 25Mpa or more. The Concrete shall be free from any defects and cracks. The epoxy compound shall have low VOC (Based on USEPA Method 24 Section 11.2.2 & ASTM D2369-98)and is chemically resistant & antimicrobial. The surface of Concrete shall be cleaned thoroughly and free from laitance and applied with primer cured for 6-8 hours. The mix shall be mixed using Hand mixing rotary machine. The underlay shall be laid with 3mm thickness and overlay at 2mm. The entire operation shall be finished in line with epoxy coving and marked with 100mm thickness yellow marking lines complete as per the direction of Engineer in chargePU Coating/Epoxy flooring sqm 1302

B57 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge kg 2193.42

B58 Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., complete. sqm 495

B59 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. sqm 80

B60 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete sqm 16

B61 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile sqm 124.5

B62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete. no 25

B63 Providing and fixing bright finished brass butt hinges with necessaryscrews etc. complete. 125x85x5.5mm (Heavy type) : no 25

B64 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. no 25

B65 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. no 25

B66 supplying and fixing hold fasts. Hold fasts no 25

B67 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 32mm nominal dia Pipes m 250

B68 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 20mm nominal dia Pipes m 100

B69 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps each 6

B70 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. One urinal basin with 5 litre white P.V.C. automatic flushing cistern. each 4

B71 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm each 6

B72 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia, each 6

B73 Providing and fixing 100 mm sand cast Iron grating for gully trap. each 10

B74 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings rrangement of approved quality and colour, weighing not less than 88 g. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. each 4

B75 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. each 4

B76 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid each 4

B77 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests each 4

B78 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. each 6

B79 Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. each 6

B80 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore. no 10

B81 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:893. no 10

B82 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. m 25

B83 Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. sqm 10

B84 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 1257

B85 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 160mm dia., 6 kg/sqcm & class 4 m 1288

B86 Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 450 mm dia. m 30

B87 Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 300 mm dia. m 50

B88 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) cum 27.88

B89 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. sqm 17.16

B90 Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge m 270

B91 Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight m 270

B92 Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm. No 1

B93 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest ammendments and instructions of engineer incharge of work. 1.50 HP 1.50 HP/1.1KW 12 STG each 2

B94 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: Borewell depth of 0 to 50 m - Water supply Upto 50.00 mtrs. m 50

B95 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for:Borewell depth of 50 to 100 m m 50

B96 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: Borewell depth of 100 to 150 m m 50

B97 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: Borewell depth of 150 to 200 m m 50

B98 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes,collars and caps etc.) for: Borewell depth of 200 to 250 m m 50

B99 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: Borewell depth of 250 to 300 m m 50

B100 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: Borewell depth of 300 to 350 m m 50

B101 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: Borewell depth of 350 to 400 m m 50

B102 PUMPSET : Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest ammendments etc. complete 5.00 HP 50 STG each 1

B103 ix) Control Panel BOARD-A: Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor typ e NOTE: 1) DOLDirect Online Starter 2)S-D- Star Delta Starter for outdoor 6 -15 HP pumps each 1

B104 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE Grade PE100-PN8.0,63mm dia m m 450

B105 Wet Mix Macadam (Plant Mix Method): Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. cum 194.4

B106 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M40 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (5% considered for Form work) cum 135

B107 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (Made of G.I. wire of dia 4 mm) sqm 489.05

B108 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc excluding the cost of CI frame and cover. each 55

B109 Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. each 65

B110 Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with ppurtenances. complete. Medium Duty Set 120

B111 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozer. In area of light jungle sqm 5000

B112 Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requiremnt of table No.300-2 cum 86.4

B113 Providing and fixing false flooring as per KPTCL specfication including cost of structural steel, fasle flooring materials, labour charges, etc., complete as per direction of engineer in charge of work. sqm 330

B114 Double Leaf doorset - Insulated Fire rated doorset (FD 120) - Staircase / exit pathway application / Refuge area. Providing and fixing of ISI marked fire doors as per IS 3614:2021, 120 minutes fire rating with 30 minutes insulation double leaf doorset tested to IS/ISO 3008. Doorset shall include grooved step frame profile of 125x75mm, made of 1.2mm GI (120GSM) and 60mm thick shutter made of 1.2mm GI (120GSM) with infill of 120kg density mineral wool. Grooved frame shall include EPDM smoke seal. Include hardwares, minimum 6nos SS ball bearing hinges of SS304 100x89x3mm, 1no of Single point Panic device and external trim with key cylinder on active leaf and 1no two point Panic device on the inactive leaf, tested as per EN1125 and CE marked. 2no of Door closer with spring size of EN 3-5, as per EN1154 and CE marked. 1no door coordinator for sequencing. 2nos vision panel 200 x 300 with 6mm clear fire rated glass and finished in desired colour of powder coating not less than 50microns including suitable anchors & fire rated puff grouting all inclusive for fixing of doorset - for staircase / exit pathway / Refuge area applications. sqm 30

B115 Design, fabrication, supply, erection, testing and commissioning of EOT crane consisting of double girder box type construction, rail mounted end carraiges with long and cross travel arrangement, main and auxiliary hoists of specified capacity, rails, pendant control, gear boxes, electric motors, brakes, rope drums, wire ropes, sheaves, end buffer stoppers, pendant operated DSL bus bars with all accessories for main and auxiliary hoists for handling GIS modules including cost of all materials,machinery, labour,cutting, aligning,welding, finishing, cleaning, greasing, applying two coats of zinc chromate red oxide primer and three coats of synthetic enamel paint and all other ancillary operations complete as per specifications and approved drawings. Ton 10

B116 Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters,belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply suitably designed for varialbe frequency drive applications, drain connections, stainless steel (18G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.)and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification no 4

B117 Supply, installation, testing and commissioning of Motorized (ON-OFF Type) duct mounted GI volume control damper with enthalpy sensor and necessary control wire (minimum 1.5 sqmm) for integration within AHU room- Damper sqm 5

B118 Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications. sqm 10

B119 Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. (a) Thickness 0.63 mm sheet sqm 400

B120 Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. (b) Thickness 0.8 mm sheet sqm 100

B121 Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. sqm 5

B122 Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications - Fire damper sqm 5

B123 Supplying, fixing acoustic lining on walls of AHU rooms with 50mm thick, density 32 kg/cum resin bonded glass fiber insulation friction fixed in 610mm x 610mm frame work made of 25x50x50x50x25mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fibre glass tissue and finished with 0.8mm perforated aluminium sheet etc., complete as required and as per specifications. sqm 160

B124 Supplying and installing following size of perforated hot dipped galvanised iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with GI suspenders including GI bots & nuts, etc., as required. 100mm width x 50mm depth x 1.6mm thickness m 600

B125 Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 25mm including the cost of materials, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer in-charge of works as per the standard procedure. sqm 11000

B126 Providing and applying primer coat with SS1 grade Bitume Emulsion on prepared surface of granular base includin cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. sqm 11000

B127 Providing and applying tack coat with RS1 Bituminous Emulsionusing emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom. sqm 22000

B128 Bituminous Macadam Grading - I for traffic <20 MSA Providing and laying Bituminous Macadam with 100 tph capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. cum 550

B129 Bituminous Concrete Grading I for traffic <20 MSA Providing and laying Bituminous Concrete with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects cum 275

B130 Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead By Mechanical Means Prestressed / RCC grade M-20 & above cum 30

B131 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications cum 1283

B132 Providing and fixing Modular multi-diameter cable sealing system which is waterproof,fire proof& rodent proof consisting of frames,blocks and accessories to be installed wherever the electrical(power/control cables/instrumentation/communication cables and under-ground and over ground at entry and exit of control room as per directions of engineer incharge of work. no 5

B133 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and overflow pipes but without fitting and the base support for tank. L 4000

B134 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty m 25

B135 Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge each 1

B136 Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. each 1

B137 SUBMERSIBLE CABLE Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 m2 m 900

B138 PRESSURE GAUGE : Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm each 1

B139 GATE VALVE : Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm each 1

B140 NON - RETURN VALVE : Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm each 1

B141 POWER CAPACITOR: Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. kVAR 2

B142 MCB: Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. per 3 poles 1

B143 Erection elctrification & Commissioning works of pumpsets : Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work Job 1

B144 Main connections: Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. m 50

B145 Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour.32A each 6

B146 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.32 A each 6

B147 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work for 50mm dia m 300

B148 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work for 40mm dia m 250

B149 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work for 25mm dia m 75

B150 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 19/20mm dia 2mm thick m 830

B151 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 25mm dia 2mm thick m 830

B152 Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100 x 75 x 65 mm each 30

B153 Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135 x 75 x 65 mm each 30

B154 Supplying PVC flexible conduit pipe ....mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated complete. 25 mm m 130

B155 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. a) Short point up to 3Mtr from tapping point to out let via switch box point 60

B156 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box point 90

B157 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.( 4/9) - II. Point wiring using class B Materialsc) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box point 90

B158 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick m 830

B159 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20mm dia 2mm thick m 830

B160 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 1.5 sqmm m 850

B161 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 2.5 sqmm m 3100

B162 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 4 sqmm m 2600

B163 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2Way each 45

B164 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3 Way each 30

B165 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way Each 30

B166 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way each 25

B167 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 1 to 2 Module each 45

B168 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 3 Module each 30

B169 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 4 Module each 30

B170 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 6 Module each 25

B171 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism 100 A 25 kA Each 6

B172 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32A SP Each 11

B173 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63A SP Each 11

B174 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 A TPN Each 6

B175 Supplying, fixing andwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole Each 6

B176 Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter each 2

B177 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. each 2

B178 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage current, programmable delay/auto/manual reset facility suitable to mounton DIN rail/ flush mounting on panel board. Each 2

B179 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch Each 115

B180 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch Each 45

B181 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket Each 35.00

B182 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module Each 10.00

B183 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch Each 25.00

B184 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket Each 25.00

B185 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame each 10.00

B186 Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. each 5.00

B187 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm) each 5.00

B188 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system 48" Sweep (1200mm) Regular model each 5.00

B189 Supplying wall mounting fan suitable to operate at single-phase 230v AC supply. 400 mm Sweep each 5.00

B190 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 20/22 W each 25.00

B191 Supplying of recess mounting non integrated type LED down light 18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 100 lumen per W, 120degree beam spread, life greater than 25000 burning hours and Compliance to IS10322/ IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED's are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should less than 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition LED modular down light 1'x1' 18W each 25.00

B192 Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRIgreater than 70%. efficacy greater than 100 lumen per W, 120degree beam spread, lifegreater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss shouldlesser than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2'x2' / 36W W No 70.00

B193 Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRIgreater than 70%. efficacy greater than 100 lumen per W, 120degree beam spread, lifegreater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss shouldlesser than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2'x2' / 40-42 W No 50.00

B194 INDUSTRIAL HIGHBAY LUMINAIRE ( INTEGRAL TYPE) Industrial medium/high bay luminaire with integral type Control gear, copper wound ballast, visor glass assembly and including supply of lamps. 100W, 240V, LED Highbay luminare No 25.00

B195 Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiencygreater than 1301m/w, nominal CRI greater than75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved /Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Flood light 150W. No 5.00

B196 Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK08 impact resistance suitable for surface and wall mounting applications. No 27.00

B197 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. The scope of work also includes transportation of released scrap reinforcement to the nearest KPTCL store including loading, unloading, transportation etc., required for completion of the work as per direction of Engineer in charge.Estimated quantity of steel is 7231.71kgs. Actual quantity shall be assessed by the field Engineer in charge of work. Cum 198.52

B198 Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 104.63

B199 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in-charge. In cement mortar.The scope of work also includes transportation of released good size stones/rubble stones to the nearest KPTCL store including loading, unloading, transportation etc., required for completion of the work as per direction of Engineer in charge.Estimated quantity of size stone/rubble stone masonry is 241.94cum. Actual quantity shall be assessed by the field Engineer incharge of work. Cum 485.37

B200 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. In cement mortar. Cum 787.45

B201 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineer-in-charge. The scope of work also includes transportation of released old wooden frames of doors, windows and ventilators /old steel doors with frame to the nearest KPTCL store including loading, unloading, transportation etc., required for completion of the work as per direction of Engineer-in-charge. Estimated quantity of wooden frames of doors, windows and ventilators is 1.98cum. Estimated quantity of steel doors with frame is 934kgs. Actual quantity shall be assessed by the field Engineer incharge of work. Sqm 191.20

B202 Fixing all types and all capacities of fluorescent /falseceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required Nos of round blocks and clamps. On wall/ ceiling / Rafter / Girders. each 235.00

B203 Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. each 10.00

B204 Supplying of .. TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R410A / R-32 refrigerant fan motor, start & run capacitors, relay & over load protector internal unit, with one indoor & one outdoor unit The condenser unit will be placed outside the room avoid noise including standard length of suitable size copper tubing covered with nitrile rubber insulation tube. suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit. 5 star 2 Ton capacity Each 21.00

B205 Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. each 21.00

B206 Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas charging for additional piping length of tube Split m 80.00

B207 Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries. each 21.00

B208 Extra length of GI pipe of class B 19mm dia for down rod. m 30.00

B209 Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete. 5kVA Capacity each 2.00

B210 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia No 10.00

1) The uploaded Soil investigation report for 220kV S/s land and is indicative and is to be referred for guidance purpose only. However all foundations shall be designed to suit the site soil condition and as per the approved layout.

2) The uploaded drawings are indicative and are to be referred for guidance purpose only. However all foundations shall be designed to suit the site soil condition and as per the approved layout.

3) The land will be handed over " As is where is condition".

Place Designation

Name of the company

Karnataka Power Transmission Corporation Limited

a) Construction of 220KV SC LILO fromexisting 220kV KB Cross-Nelamangala (B2) line to proposed 220/66/11kVHirehalli GIS sub station using Drake equivalent HPC conductor for a distance of 0.805km (in existing corridor of 66kV Hirehalli - Honnudike and 66kV Hirehalli - Brindavan line) in Tumakur Taluk and District. b) Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS sub station up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) I) Partially using Coyote ACSR conductor for 3.86 kms in existing corridor in Tumakuru Taluk & District. c) Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete SC Line using Coyote equivalent HPC for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. a)r Replacement of existing Coyote conductor by HPC of Ampacity 700 amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation for a distance of 17.676 km in Tumkur Taluk & District. b) Replacement of existing conductor by HPC of Ampacity 700 amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of 2.359 kms in Tumkur Taluk & District. c) Replacement of existing Coyote conductor by HPC of Ampacity 700 amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation for a distance of about 23.066 kms in Tumkur & District.

BIDDERS SHALL NOTE: FILL ONLY IN LIGHT BLUE COLOURED CELLS

Bidders Name and Address along with GSTIN No.: To

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavan, A.R.Circle, BANGALORE - 560009.

Sl. No. Specifications Unit Quantity Total Quatity Work(a+b+c)

a)220kV SC LILO line (0.805kms) bI) Single circuit SC line (3.86kms) c)66kV SC line (43.101kms)

C1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m Cum 1506.84 604.84 358.64 2470.32

C2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils upto 3.0 m depth with 5% de-watering is assessed as per site condition Cum 1009.34 688.04 432.12 2129.50

C3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth. Cum 1201.63 449.12 230.67 1881.42

C4 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting Depth exceeding 1.5 m but not exceeding 3 m depth Cum 574.04 57.83 67.63 699.50

C5 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting Depth upto 1.5 m with 5% de-watering is assessed as per site condition Cum 0.00 0 36.02 36.02

C6 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting Depth exceeding 1.5 m but not exceeding 3 m depth with 7.5 % de-watering is assessed as per site condition Cum 0.00 23.81 14.82 38.63

C7 Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. In Hard Rock (requiring blasting) Depth upto 1.50m Cum 104.97 56.95 30.48 192.40

C8 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 65.64 32.17 20.40 118.21

C9 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation Cum 931.93 459.93 272.62 1664.48

C10 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures Kg 80259 20629.01 13308.33 114196.34

C11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 3399.24 1388.50 877.35 5665.09

The Design shall be safe against all anticipated/possible forces and pressures. All necessary checks for the stability of the structure shall be carried out.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

b) Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS sub station up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) II) using 1000 Sq.mm UG cable in new corridor for 1.6 kms & 66kV EHV UG Cable portion 1.6km.

BIDDERS SHALL NOTE: FILL ONLY IN LIGHT BLUE COLOURED CELLS

Bidders Name and Address along with GSTIN No.: To

The Chief Engineer, Electy., Tendering & Procurement, 9th Floor, Indhana Bhavana, KPTCL, A R Circle, BANGALORE - 560009.

Sl. No. Specifications Unit Quantity

D1 Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition of earth on back with all leads and lifts including Shoring, Strutting, providing Caution Boards, Danger lighting , Bracing, Sheeting, Bailing out of water, Barricades and other works not specifically mentioned herein but required for the completion of work as per site condition in all respects and as per approved drawing. In all kind of soil for required depth. Cum 831

D2 Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition of earth on back with all leads and lifts including Shoring, Strutting, providing Caution Boards, Danger lighting , Bracing, Sheeting, Bailing out of water, Barricades and other works not specifically mentioned herein but required for the completion of work as per site condition in all respects and as per approved drawing. Ordinary/soft rock (without requiring blasting) for required depth. Cum 237.43

D3 Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition of earth on back with all leads and lifts including Shoring, Strutting, providing Caution Boards, Danger lighting , Bracing, Sheeting, Bailing out of water, Barricades and other works not specifically mentioned herein but required for the completion of work as per site condition in all respects and as per approved drawing. Hard rock (blasting prohibited) for required depth. Cum 118.71

D4 Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately By Mechanical Means By Bituminous course Cum 230.17

D5 Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately By Mechanical Means Granular course Cum 115.08

D6 Dismantling of Cement Concrete Pavement : Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantled materials and stacking serviceable and unserviceable materials separately. Cum 230.17

D7 Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer- in-charge of works as per the standard procedure. Cum 666.45

D8 Supplying and Providing pre cast RCC Protection Covers using M20 grade Concrete, steel of approved size/shape (as per the approved drawings) to be laid in UG cable works. The rate includes the cost of material, labour charges, loading, unloading, handling, transportation charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer-in-charge of works as per the standard procedure. Sqm 448.00

D9 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications Cum 565.06

D10 Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work Cum 622.08

D11 Providing and laying of warning tape / Caution tape / detector tape for HDPE pipes of 200 mm wide, 300 micron thick, blue in colour confoming to relevant ISS with latest amendments with appurtenances., complete m 1280.00

D12 Supplying and Providing Pre cast Cable Route/ Joint marker using M15 grade Concrete, MS rods of approved size/shape (as per the approved drawings) to be laid in UG cable works. The rate includes the cost of material, labour charges, loading, unloading, handling, transportation charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer-in-charge of works as per the standard procedure. No 32.00

D13 HDD method for laying of 110 kV and 66 kV UG Cables: Installation of 3 rows of HDPE pipes PE 80 PN6 of 160 mm dia using Horizontal directional drilling technique (HDD method) including preparing and setting up the plant and equipment, preparing and installation of new pipe work materials and commissioning system or making the system ready for commissioning by HDD operation including all excavation, shoring/strutting etc., drilling, stringing, ramming and pulling back the new work on the design bore path alignment, proper disposal of drilling fluid and restoration of site after completion etc., for HDD technique suiting Indian conditions in all types of soil. m 320.00

D14 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3m Cum 61.50

D15 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 45.90

D16 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - (3% cosidered for Form work) Cum 11.73

D17 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M40 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (5% considered for Form work) Cum 60.75

D18 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures kg 4335.72

D19 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates Cum 50.00

D20 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. HDPE Grade PE80-PN6.0,160mm dia m 100.00

D21 Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. For Grading -V Material Cum 149.04

D22 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Cum 243.00

D23 Prime Coat over WMM/WBM: Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per m2 using mechanical means. Sqm 648.00

D24 Dense Graded Bituminous Macadam Grading - II for traffic less than 20 MSA: Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity HMP batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Cum 48.60

D25 Tack coat on Granular surface treated with primer Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface Sqm 648.00

D26 Bituminous Concrete Grading II for traffic less than 20 MSA : Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects Cum 25.92

Place Designation

Name of the company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 4 Price Break up for Supply of MANDATORY SPARES

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Indhana Bhavan, Bengaluru - 560009.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

Sl No. Name of the Equipment/Materials Unit Quantity Indicate whether "Own manufactured Item" or "Bought Out Item" Indicate country of Origin

MS1 Mandatory Spares For GIS Common Spares, Maintenance and Testing Tools . SF6 Gas pressure relief devices of each type Set 1

MS2 Pressure gauges (of each type) along with coupling device Set 1

MS3 Rubber Gaskets, “o” Rings and seals for SF6 gas Set 1

MS4 Molecular filter for SF6 gas Set 3

MS5 Density Monitors for SF6 gas Nos 2

MS6 All types of Control Valves for SF6 gas (Market rate) Set 1

MS7 SF6 gas filled in 50kg cylinder (including non-returnable carbon steel cylinders Nos 2

MS8 220 / 66 kV Bushing for connection to GIS duct Set 1

MS9 CIRCUIT BREAKERS:- GIS SF6 CIRCUIT BREAKER: All spares shall be for 220KV and 66KV separately a) 220 kV, Single ph., 2000A Circuit Breaker interrupting chamber complete with all necessary apparatus. Note: The spares shall be for 220KV & 66KV rating separately, prices shall be quoted accordingly. Nos 1

MS10 b) 66 kV, Single ph., 2000A Circuit Breaker interrupting chamber complete with all necessary apparatus. Note: The spares shall be for 220KV & 66KV rating separately, prices shall be quoted accordingly. Nos 1

MS11 1)Rubber gaskets, `O' rings and seals Note: The spares shall be for 220KV & 66KV rating separately, prices shall be quoted accordingly. Set 1

MS12 2)Trip coils with resistor. Note: The spares shall be for 220KV & 66KV rating separately, prices shall be quoted accordingly. Nos 3

MS13 3)Closing coils with resistor Note: The spares shall be for 220KV & 66KV rating separately, prices shall be quoted accordingly. Nos 3

MS14 4)Relays, Power contactors, push buttons, timers & MCB etc. Note: The spares shall be for 220KV & 66KV rating separately, prices shall be quoted accordingly. Set 1

MS15 5)Closing assembly/ valve Nos 1

MS16 6)Trip assembly/ valve Nos 1

MS17 7)Pressure switches Set 1

MS18 8)Auxiliary switch assembly Nos 1

MS19 9)Operation Counter Nos 1

MS20 10)Rupture disc/diaphragm Nos 1

MS21 11)Windoscope / Observing window Nos 1

MS22 a) 220 kV, Single ph., 2000A Circuit Breaker operating mechanism, complete with all necessary connecting apparatus. Nos 1

MS23 b) 66 kV, Single ph., 2000A Circuit Breaker operating mechanism, complete with all necessary connecting apparatus. Nos 1

MS24 All types of coupling for SF6 gas(1 no. each type) Set 1

MS25 ISOLATORS & E/SWITCH GIS a) 220 kV, Single ph., 1600A Disconnecting & maintenance earthing Switch internal parts, complete with all necessary gaskets, mounting hardware, etc. Set 1

MS26 b) 66 kV, Single ph., 1600A disconnecting & maintenance earthing Switch internal parts, complete with all necessary gaskets, mounting hardware, etc. Set 1

MS27 a) Operating mechanism of 220kV, 1600A Disconnecting Switch, complete with all necessary connecting apparatus. Set 1

MS28 b) Operating mechanism of 66 kV, 1600A Disconnecting Switch, complete with all necessary connecting apparatus. Set 1

MS29 a) 220kV, 1600A, single phase high speed fault making Earthing switch, Internal parts complete with all necessary gaskets mounting hardware etc. Set 1

MS30 b) 66 kV, single phase high speed fault making Earthing switch, Internal parts complete with all necessary gaskets mounting hardware etc. Set 1

MS31 a) Operating mechanism of 220kV, 1600A, high speed fault making Earthing switch, complete with all necessary gaskets connecting apparatus. Set 1

MS32 b) Operating mechanism of 66 kV, high speed fault making Earthing switch, complete with all necessary gaskets connecting apparatus. Set 1

MS33 Limit switch & Aux. switches Set 1

MS34 CURRENT TRANSFORMER - GIS - Complete CT (1 No of each rating) (i) 220 kV Nos 1

MS35 (ii) 66 kV Nos 1

MS36 VOLTAGE TRANSFORMER - GIS (i) Single phase VT complete with all gaskets and mounting hardware. (220 kV) ( 1 No of each rating) Nos 1

MS37 (ii) Single phase VT complete with all gaskets and mounting hardware. (66 kV) ( 1 No of each rating) Nos 1

MS38 SURGE ARRESTOR - GIS Complete L.A. including with Surge counter & accessories: (i) 220 kV Nos 1

MS39 (ii) 66 kV Nos 1

MS40 EMERGENCY DG SETS : 1)Set of filters (Lubeoil/fuel/Air ckt) Set 1

MS41 2)Solenoid coil assembly Nos 1

MS42 3)Self starter assembly Nos 1

MS43 4)Lub-oil pressure safety control Nos 1

MS44 5)High water temp. safety control Nos 1

MS45 6)Diode Nos 2

MS46 SPARES FOR RELAY AND PROTECTION PANELS- Relay Panel Spares 1)All type of Numerical relays (1 No each Type) Nos 1

MS47 2)Trip circuit supervision relay Nos 2

MS48 3)Self reset trip relay (1 No each Type) Nos 1

MS49 4)Hand reset trip relay (1 No each Type) Nos 1

MS50 5)Timer relay (1 No each Type) Nos 1

MS51 6)DC supervision relays Nos 1

MS52 7)Flag relays (1 No each Type) Nos 1

MS53 8)Auxiliary relays (1 No each Type) Nos 1

MS54 COMMON SPARES 1)Each type of module of bus bar differential relay for Bus Bar protection. Set 1

MS55 2)Metrosil(Non-linear resistor) each type Set 1

MS56 3)Inter-posing CT & PTs each type Set 1

MS57 Mandatory spares for Sub-Stn Automation system: 1)Bay control unit with configuration software Set 2

MS58 2)Ethernet Switch of each type Nos 1

MS59 3)Optical cable of longest length Nos 1

MS60 MANDATORY SPARES FOR POWER TRANSFORMER: 1) Oil collecting bottle Nos 3

MS61 2)Terminal connector clamps a) Suitable for 220kV class bushing to suit single Moose ACSR Nos 3

MS62 b) Suitable for 66kV class bushing to suit Double Moose ACSR Nos 3

MS63 3)Valves: a) Drain valve (100mm to 200mm size) Nos 1

MS64 b) Top/Bottom Filter Valve (50mm to 100mm size) Nos 2

MS65 c) Top/Middle/Bottom Oil sampling valve with plug (15 to 25 mm) Nos 3

MS66 d) Header pipe valve Nos 1

MS67 e) Gate/Butterfly valves of various sizes ranging from 50mm to 200mm Set 1

MS68 4)MOG Nos 1

MS69 5)Prismatic Gauge Nos 1

MS70 6)Starters, contactors, relays Set 1

MS71 7)Pressure Relief Device (PRD or PRV) Nos 1

MS72 8)Oil Surge relay Nos 1

MS73 9)Bucholtz relay Nos 1

MS74 10)Tap position Indicator Nos 1

MS75 11)Fixed and moving contacts for diverter switch Set 1

MS76 12)Fixed and moving contacts for selector switch 220kV and above class Set 1

MS77 13)WTI with 4 contacts, 15 meters capillary length with built in CCU RTD and external remote indicator, range 0-150 deg C with SCADA/SAS compatibility Set 1

MS78 14)OTI with 2 contacts, 15 meters capillary length with built in CCU RTD and external remote indicator range 0-150 deg C with SCADA/SAS compatibility Set 1

MS79 15)PT 100 sensor along with probe of suitable length Set 1

MS80 Testing and Maintenance for GIS/Relays: 1)SF6 Gas filling and evacuating & storage plant Set 1

MS81 2)Portable Partial Discharge Monitoring for GIS(minimum 6 channels) Set 1

MS82 3)Portable SF6 gas leak Detector Set 1

MS83 4)Portable SF6 gas quality analyzer- Online measurement of moisture (Dew point/PPM), purity, SO2, HF, CF4 & air content of SF6 gas. Set 1

MS84 Maintenance and Testing equipment: 1)Fully automatic Capacitance & Tan delta measuring test Set 1

MS85 2)Portable dissolved gas analyser Set 1

MS86 3)SF6 gas filing adaptor kit for Circuit Breaker. Set 1

MS87 4)Micro ohm meter (1.0 micro-ohm to 199.99 micro-ohm) Set 1

MS88 5)BDV test kit Set 1

MS89 6)Circuit Breaker operational analyzer-DCRM Set 1

MS90 7)Numerical Relay testing kit Set 1

MS91 8)Digital DC insulation tester(0-5kV) Set 1

MS92 9)Online DC earth fault locator with built-in charger & rechargeable batteries Set 1

MS93 10)Combined CT & VT Analyzer Set 1

MS94 Mandatory spares for 66kV 1000Sqmm EHV UG Cable: Outdoor type cable end termination suitable for 66 kV, 1C X 1000 Sq mm segmental compact type miliken copper conductor, XLPE, lead sheathed cable as per technical specification. Nos 2

MS95 Indoor type cable termination (plug in dry type) suitable for GIS modules confirming to IEC 62271- 209 for 66 kV, 1000 Sq mm, copper conductor, XLPE insulated lead sheathed cable as per technical specification. Nos 2

MS96 Single phase Link box outdoor structure mounting type, with SVL suitable for 110 kV & 66 kV, 1000/630/400/240 Sq mm UG cable including 240 Sq mm sheath bonding cable as per the technical specification. Nos 2

1. Supply of equipment/materials and the Erection charges shall include loading and unloading.

2. The Bidder shall take necessary action to ensure that all the materials supplied shall be properly housed to ensure satisfactory commissioning.

3. The Bidder shall quote same rates for common materials in all the Percentage-Wise Financial Bid Offer.

4. The Prices for all the materials shall be quoted in the Percentage wise finanacial bid.

5. The Bidder shall clearly indicate whether the materials/equipments are “Own manufactured” or “Bought out item”.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-5 COMMERCIAL DEVIATION

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Please fill Only in the Light Blue Couloured Cell.

Please key in the SlNo., Section , Clause , Description as given in bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening. Please refer Vendor Manual attached for further details.

For any further assistance for submitting your bids please call up KPTCL Office.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. :

TO, THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL,9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru -560009

I/we have read each of the Clauses mentioned in INVITATION FOR TENDERS , INSTRUCTION TO TENDERERS , CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT and COMMERCIAL TERMS AND CONDITIONS and all the sections of Bid documents.

The following are the commercial Deviations and Variations from and exceptions to the Specifications and documents for

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

These deviations and variations are exhaustive. Except these deviations, the entire work shall be performed as per your specifications and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-6 : TECHNICAL DEVIATION

SHEET FOR TECHNO-COMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Please key in the SlNo., Section , Clause , Description as given in Bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening.

For any further assistance for submitting your bids please call up KPTCL office. Please fill only in the blue coloured cells.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. : TO,

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL,9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru , -560009

The following are the Technical Deviations and Variations from and exceptions to the Specifications and documents for

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

These deviations and variations are exhaustive. Except these deiviations and variations, the entire work shall be performed as per your specification and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 7(List of special tools and tackles )

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Bidder's Name & Address alongwith GSTIN no. : TO,

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL,9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru -560009

List of special tools and tackles the price of which is included in bid price.

Sl. No. For equipment Description of item Unit Quantity

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 8 - Additional Information

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

NOTE: 1 ) SHALL BE FURNISHED WITHOUT PRICES

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru - 560009

We have enclosed(uploaded) with our proposal the following additional information.

Sl. No. Brief Description of information Ref. and Page No.

Date Printed Name

Place Designation

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (1 of 6) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Please fill Only in the Light Blue Couloured Cell.

BIDDER'S NAME AND ADDRESS: THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL, 9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru - 560 009

a) * We have submitted bid as individual Bidder. (Key in Individual Bidder )

b) * We have submitted bid in Consortium with the following Bidders. (Key in Consortium )

Name of Consortium Partner Scope / Participation of each Consortium / Joint Venture Partner

(* Fill-up whichever is applicable)

1.0 GENERAL INFORMATION

All Bidder bidding for this package are requested to complete the information in the following form.

Sl.No. Particulars For individual Bidder In case of Consortium :

Lead Bidder Consortium partner

1 Name of the Firm

2 Address of Head Office / Registered Office GST no.

5 Name of Contact person with Designation

6 Place of Incorporation/Registration

7 Year of Incorporation/Registration

8 Constitution or legal status of Tenderer [Upload copy]

9 Place of Registration [Upload copy]

10 Principal place of business

2.0 We are furnishing the following details/documents in support of Qualifying requirement for above mentioned project

Sl.No. Particulars For individual Bidder In case of Consortium :

Lead Bidder Consortium partner

(a) Written power of attorney of the signatory on the bid to commit the bidder.

1 Uploaded / Not

(b) Certificate of Registration of the Company. Please mention the date of incorporation of the company

1 Uploaded / Not

(c ) Valid Super Grade Electrical Contractor’s License issued by the Government of Karnataka as on the date of techno commercial Bid opening. Please mention the date of expiry of the License certificate issued by GOK/ Undertaking to this effect

1 Uploaded / Not

(d) Self declaration regarding Litigation w.r.t KPTCL contracts over the last five years (refer IFT)

1 Uploaded / Not

(e) Self declaration for ‘not being disqualified regarding non-performance in any of the Government utilities in the past five years’. (refer IFT)

1 Uploaded / Not

(f) An undertaking to source the supply of equipment/ material from KPTCL approved vendors only as per QR for Vendor registration, available in the KPTCL website ie., kptcl.karnataka.gov.in, Link Tendering & Procurement-Application for Vendor.

1 Uploaded / Not

(g) Self declaration regarding no action against the bidder have been taken by KPTCL in respect of Risk & Cost clause

1 Uploaded / Not

(h) Self declaration regarding 'Eligibility clauses in respect of restrictions on procurement from a bidder of a country which shares a land border with India as per Annexure-XVI

1 Uploaded / Not

(i) Self declaration regarding RESTRICTIONS ON SOURCING OF EQUIPMENTS/MATERIALS BY THE BIDDER FROM A VENDOR OF A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA as per Annexure -XVII

1 Uploaded / Not

Section 3 : 1.3 Work performed of similar nature in the last Ten years of both Lead Bidder & Consortium partner (in case of Consortium) as per Clause No: 3.2 (b) (i) & (ii) of ITT

Project Name Name & Address of the Employer Description of Work Voltage class Number of Sub-Stations/TBs/Length of the Line Contract Number Value of contract Rs. Lakh Date of issue of work order Specified period of completion Actual date of commissioning Remarks explaining reasons for delay in commisioning of work

Name of Consortium Partner

Note : 1 . The documentary proof of fulfilling the qualifying requirements shall be uploaded along with the bid. The bidder shall upload the P.O,LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer along with the bid.

2. The qualifying experience of the Bidder and Consortium Partner(in case of Consortium) who is having qualifying experience shall be furnished in the above performa and Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations.

3. IF this sheet is insufficient for furnishing the qualifying experience of the Bidder then similar sheets shall be seperately uploaded.

4. In case of work executed under a contract that had been awarded on a joint venture, the experience of individual joint venture partner shall be considered limited to the scope of that partner under the said contract. The copy of the agreement executed with awarding agency shall be uploaded as proof of the same

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (2 of 6) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

BIDDER'S NAME AND ADDRESS: TO,

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL, 9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru - 560 009

Section 3 : 1.5 Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender of a Bidder

(A) Existing commitments and on-going works:

Description of work Place & State Contract No & Date Name and Address of Employer Value of Contract (Rs. Lakh) Stipulated period of of Completion Value of works remaining to be completed ( Rs.Lakhs) (Attach Certificates from Engineers –in- Charge) Anticipated date of commissioning

Ex-Works GST Total (Ex-works + GST)

Name of the Lead Bidder

Name of the Consortium Partner

Note:Attach Certificates from Engineers –in- Charge

B)Works for which Tenders already submitted

Description of work Place & State Name and Address of Employer Estimated value of works (Rs. Lakh) Stipulated period of Completion Date when decision is expected Remarks if any

Ex-Works GST Total (Ex-works + GST)

Name of the Lead Bidder

Name of the Consortium Partner

i) The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. OR The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be verified and certified by Chartered Accountant /Cost Auditor. However, the Bidder has to upload the PO/Work Award copies for existing commitments and on-going works

ii) A self-declaration is to be uploaded by the Lead Bidder & Consortium partner (in case of Consortium) stating that "the information with regard to assessed available tender capacity (Works on Hand) furnished are correct". iii) Bidders shall furnish Certificate from Chartered Accountants for split details of Ex-works values and GST of Contract values of the works in the prescribed format as at Clause No. 1.5 of Section-3: Qualification Information.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (3 of 6) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

BIDDER'S NAME AND ADDRESS: TO,

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL, 9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru - 560 009

Following is the list of major supplied subsation equipments/accessories which are type tested and designed, manufactured by us in accordance with internationally recognised standards.

Sl. No. Item rating, type and Designation Qty Customer Date of Order Date of Supply Date of Commissioning Ref. of Cusomer's certificate of successful operation enclosed Ref. of layout & Customer's certificae for successful commission

Note: Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations. .

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (4 of 6) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, Indhana Bhavana Bangalore - 560 009

Section 3 : 1.7 Reports on the financial standing of the tenderer (Lead bidder & Consortium partner (in case of Consortium)), such as profit and loss statements and auditor’s reports in the preceeding last five years ; Audited Financial statements i.e Balance sheets, P&L statements, Turnover certificates duly certified by chartered Accountant as documentary evidence shall be uploaded.

SLNo. Particulars Year Lead Bidder Consortium Member

Mention Year Turnover excluding GST (in Rs.) GST Amount (in case GST is included in Turnover) (in Rs.) Turnover including GST (in Rs.) Mention Year Turnover excluding GST (in Rs.) GST Amount (in case GST is included in Turnover) (in Rs.) Turnover including GST (in Rs.)

Names of the constituent Firm

1 Annual turn over for the last Five years Year(1) 2020-21 2020-21

2 Liquid Assets / Credit availability or access to evidence of assets

3 Whether Audited Balance sheets and Profit & Loss statement are enclosed for the last Five Years ? (yes/No)

4 Whether Bankers certificate enclosed for credit facilities? (Yes/No)

Note: Bidders shall furnish Certificate from Chartered Accountants for split details of financial Turnover and GST in the prescribed format (Annexure-XX) of tender document.

Place Designation

Name of the Company

Name of the Company

Karnataka Power Transmission Corporation Limited

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

SCHEDULE - 9 (5 of 6) : QUALIFYING REQUIREMENTS

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

BIDDER'S NAME AND ADDRESS: TO,

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL, Indhana Bhavana, Bangalore - 560 009

The information to be filled in by the Tenderer hereunder will be used for purposes of computing Tender capacity as provided for in Clause 3 of the Instructions to Tenderers. This information will not be incorporated in the Contract.

Lead Bidder Consortium partner Attach Copy

1.1 Constitution or legal status of Tenderer [Upload copy]

Place of Registration [Upload copy]

Principal place of business

Section - 3: 1.2 Total value of works executed (KPTCL & Non KPTCL works)Excluding GST and payments received in the last five years (in Rs. Lakhs) of both Lead Bidder & Consortium partner (in case of Consortium).

1.2 Total value of works executed (KPTCL & NON KPTCL works) Excluding GST and payments received in the last five years (in Rs. Lakhs) of both Lead Bidder & Consortium partner (in case of Consortium). Financial Year KPTCL works Non KPTCL works

Individual Bidder In case of Consortium Individual Bidder In case of Consortium

Total value of works Excluding GST in Rs. Lakh Lead Bidder Consortium Partner Total value of works Excluding GST in Rs. Lakh Lead Bidder Consortium Partner

Total value of works Excluding GST in Rs. Lakh Total value of works Excluding GST in Rs. Lakh Total value of works Excluding GST in Rs. Lakh Total value of works Excluding GST in Rs. Lakh

Note: Attach relevant Certificate/s from Chartered Accountant.

Section 3: 1.9 Name, address, telephone number & e-mail id of the Tenderers' bankers who may provide references if contacted by the Employer:

1.9 Sl.No Name, address, telephone number & e-mail id of the Tenderers' bankers

Section 3: 1.12 Information on litigations in which the Tenderer is involved:

Other Party(ies) Employer Details of Dispute Amount involved Remarks showing Present Status

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (6 of 6) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, Indhana Bhavana, Bangalore - 560 009

Section3 : 1.6 The following items of equipment are considered essential for successfully carrying out the works. The Tenderer should furnish all the information listed below

Sl. No. Item / equipment Requirement capacity (should match with 3.3(a) of ITT) Owned/brought out on hired or Lease basis Owned & available Age/ Condition Remarks

1 Hydraulic Crane

2 Three Sheave Arial Rollers

3 Hydraulic Compressor Jointing Machine

4 Drum lifting jacks

5 Come along clamps

7 Road Roller & Graders

8 Rolling Compactors

9 Excavators & Dozers

10 Adequate Tentioners & Pullers (in case of 400kV Transmission line works )

Note: Self-Declaration regarding the above shall be uploaded

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-10 (1 of 3) Details of Tools and Plants available

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, Indhana Bhavana, Bangalore - 560 009

Following are the details of the Tools and Plants available with us.

Sl. No. Description Quantity Make Present Location / Project Remarks (if any)

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 10-2 of 3 Details of Technical staff employed

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, Indhana Bhavana, Bangalore - 560 009

Section 3: 1.8 Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Sl. No. Name of the employee Designation Branch (Degree/Diploma) Year of Passing Since when employed in erection division Past Experience

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 10- (3 of 3)

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, Indhana Bhavana, Bangalore - 560 009

We propose the following deployment of manpower for the substation and Line package.

Sl. No. Category MONTHS AFTER PLACEMENT OF AWARD LETTER

1 Project manager

2 Sr. Project Manager

5 Skilled labour

6 No skilled labour

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-11 (A) : COMPLETION SCHEDULE FOR STATION PORTION

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Bidders Name and Address: To,

The Chief Engineer, Electricity, Tendering & procurement, KPTCL, Indhana Bhavana, Bangalore - 560009

We hereby declare that following schedules shall be followed by us for the above work. The period of various activities from the date of placement of award letter shall be as follows

SL.NO Activity Period in Months for the work of Substations

Commencement Completion

1 Detailed engineering

2 Procurement of bought out items / raw materials

3 Manufacturing & Testing

5 Setting up of site office, Sheds & stores etc.

7 Concreting for

a)Structure Foundations

b)Equipment and mounting structure foundadions

c)Cable trenches

2. Installation

8 Receipt(at site) of

a)Main equipment / spares

c)Insulators & Hardwares

d)Clamps & Connectors

e)Marshalling kiosks

f)Cables & Cabling Materials

a)Main structures

b)Equipment support structures

10 Equipment Erection

12 Bus bar erection

15 Completion of testing and ready for commissioning

16 Commissioning

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-11B : COMPLETION SCHEDULE FOR TRANSMISSION LINES

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Bidders Name and Address: To

The Chief Engineer, Electricity, Tendering & procurement, KPTCL, Indhana Bhavana, Bangalore - 560009

We hereby declare that following shedules shall be followed by us for the above work. The period of various activities from the date of placement of award letter shall be as follows.

SL.NO Activity Period in months for work of Construction of Transmission Lines

Commencement Completion

1 Submission of Drawings

2 Completion of detailed engineering

3 Commencement of Manufacturing

4 Completion of Manufacturing

5 Readiness for testing

6 Readiness for Shipment

7 Receipt at Site

8 Completion of Shipment

1 Detailed Survey

2 Setting up of site office, sheds and stores etc.

3 Exacavation for foundations.

4 Foundations and other Civil Works

5 Erection of Tower alongwith accessories

6 Stringing of conductor/ groundwire alongwith accessories

7 Testing , Commissioning and Handing over.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 12 TYPE TESTS & TEST CHARGES OF EQUIPMENT/MATERIALS

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

BIDDERS SHALL INDICATE VARIOUS TYPE TESTS IN LIGHT BLUE COLOURED CELLS

ALL THE TYPE TESTS APPLICABLE FOR EACH OF THE EQUIPMENTS SHALL BE INCLUDED.

Bidders Name and Address To,

The Chief Engineer, Electricity, Tendering & procurement, KPTCL, Indhana Bhavana, Bangalore - 560009

SL.No Details of Equipments Type Test Test Charges ( in Rs )

1 Power Transformers:

2 220kV GIS Equipments (50KA rating):

a) 220kV line (UG Cable) Module

b) 220kV Bus Coupler Module

c) Transformer Module (For 150MVA – 220KV Side)

d) 220kV PT Module

e) Bus Maintenance earth switch 3 Phase, Single pole

f) 20kV SF6 duct

g) 220kV SF6/Air Bushing

3 66kV GIS Equipments (40KA rating):

a) 66kV line (UG Cable) Module

b) 220kV Bus Coupler Module

c) Transformer Module (For 150MVA – 66KV Side)

d) 66kV PT Module

e) Bus Maintenance earth switch 3 Phase, Single pole

f) 66kV SF6 duct

g) 66kV SF6/Air Bushing

h) Transformer Module (66/11kv Side)

4 SF6 Circuit Breakers:

6 Current Transformer:

6 Capacitive Voltage Transformer:

7 Surge Arrestors

8 a) Relay & Protection Panels

9 b) Substation Automation

10 L.T. A.C Panel

11 Station Battery

12 Station Battery Charger

13 PLCC Battery

14 PLCC Battery Charger

15 1.1KV Copper control cables/LT Power Cable

16 66 KV UG Cable

17 11KV U.G Cable

18 PLCC equipment

19 Conductors & Earth Wire a) Bersimis ACSR conductor

b) AAAC Moose Conductor

c) Moose ACSR Conductor

d) Drake ACSR conductor

e) Coyote Conductor

20 Insulators a) 160/120/90KN Disc Insulator Strings

b) Solid Core Insulators

c) Post Insulators

21 Station / Mounting Structures

23 Hardware Materials

24 Aluminium pipe and Clamps

25 AC DISTRIBUTION BOX

26 DC DISTRIBUTION BOX

27 Nitrojen Fire Fighting Protection System

28 Addressible Type Fire Alarm System

29 66kV single core, 1000sqmm UG Cable

30 AC DISTRIBUTION BOX

31 DC DISTRIBUTION BOX

32 Nitrojen Fire Fighting Protection System

33 66kV single core, 1000sqmm UG Cable

34 24F / 48F OPGW Cable

35 220 KV Straight Through Joint

36 220 KV Cable end Terminations Indoor / outdoor

37 66 KV Straight Through Joint

38 66 KV Cable end Termination Indoor / outdoor

39 HPC Conductor 1400A

39 HPC Conductor 700A

40 HPC accessories

NOTE: The Type Test / Special Tests, if repeated at the insistance of owner, the applicable testing charges shall be paid by the successful Bidder upfront to the laboratory and the same shall be reimbursable by KPTCL as per actuals on submission of Bills along with proof of payment and on successful completion of all the Type Tests, specified and on approval of the same by the owner. In case equipment/material fails in the type tests during testing then the testing charges paid by the Bidder to the laboratory will not be reimbursed by KPTCL. The above Clause is applicable for all the equipments/materials, in case, the Type Test / Special Tests, are repeated at the insistance of owner(KPTCL).

Place Printed Name

Karnataka Power Transmission Corporation Limited

Schedule -13-List of Optional Spares

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Bidders Name and Address

To, The Chief Engineer, Electricity, Tendering & Procurement, Indhana Bhavana, KPTCL, Bangalore - 09.

List of optional spares required to meet the specified performance for a period of three years

Sl. No. For Equipments Details of item Unit Quantity

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 14-Guaranteed Losses

SHEET FOR TECHNOCOMMERCIAL OPENING

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

Bidders Name and Address To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Indhana Bhavana, BANGALORE - 560009

Dear Sir, We Declare that the ratings and performance figures of the Transformers furnished by us under the Turnkey Package are Guaranteed. We further declare that in the event of any deficiencies in meeting the guarantees in repect of the characteristics mentioned below as established after conducting the factory test, you may at your discretion,reject or accept the equipment after assessing the liquidated damages as specified in relevant clause of Bid Document.

Sl no Equipment Guaranteed Losses at rated output (KW) at Principal Tap % Impedance at rated current and frequeny at 75 Deg C at Normal tap

Max. No Load Loss in KW at rated voltage & frequency Max. Load loss in kW at rated current and at 75 Deg C (at principal tap position) Max. I ²R loss at rated current and at 75 Deg C (at principal tap position) Max. Auxiliary Loss at rated voltage & frequency HV to IV HV to LV IV to LV

1 150MVA, 220/66/11kV Power Transformer

2 10MVA, 110/11kV Power Transformer

Note:(i) Refer Technical Specifications (ii)The loss quoted shall be consistent in Schedule 14 and GTPs(DRS) of Power Transformers

Equipment Max. Losses in Watts @ 50% Loading Max.Losses in Watts @ 100% Loading % Impedance (subject to tolerance as per IS:2026) Remarks

1 250KVA, 11KV/433V Auxiliary Transformer Note: Refer Technical Specifications for Auxiliary Transformer

2 100 kVA, 11 kV/433 V Auxiliary Transformer

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 14-Guaranteed Losses

SHEET FOR TECHNOCOMMERCIAL OPENING

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

Bidders Name and Address To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Indhana Bhavana, BANGALORE - 560009

Dear Sir, We Declare that the ratings and performance figures of the EHV cable furnished by us under the Turnkey Package are Guaranteed. We further declare that in the event of any deficiencies in meeting the guarantees in repect of the characteristics mentioned below as established after conducting the factory test, you may at your discretion,reject or accept the equipment after assessing the liquidated damages as specified in relevant clause of Bid Document.

1 Size of the Cable 66kV, 1000 Sqmm UG cable 110kV, 1200 Sqmm UG cable

Guaranteed Values Remarks Guaranteed Values Remarks

2 Losses per Km [Refer clause No. 21.4 (Guaranteed Loss) of SCC, Volume I]

a) a) Total 3 Phase Dielectric Loss at rated voltage and rated current:

i. One Circuit alive kW/km

ii. Both Circuits alive kW/km

b) b) (i)Total 3 Phase Copper Loss at rated voltage and rated current: Note: The AC resistance of conductor (Rac), at the said rated continuous current(950A) in ground shall be considered for calculation of copper losses. The corresponding temperature at rated continuous current(950A) in ground shall also be indicated.

i. One Circuit alive kW/km

ii.Both Circuits alive kW/km

c) c) Total 3 Phase sheath / screen loss at rated voltage & rated current:

i. One Circuit alive kW/km

ii.Both Circuits alive kW/km

d) d) Other losses due to reinforcement:

i. One Circuit alive kW/km

ii.Both Circuits alive kW/km

e) e) Total Losses at rated voltage & rated current:

i. One Circuit alive kW/km

ii.Both Circuits alive kW/km

3 Guaranteed Weights:

a) Nominal (guaranteed) Weight of copper:- Main Conductor excluding copper wire screen in kg/m

b) Nominal (guaranteed) Weight of copper:- Copper wire screen excluding main conductor in kg/m

c) Nominal (guaranteed) Weight of Lead in kg/m

Note: (i) The Guaranteed Values indicated in this Sheet, shall be same as that of Guaranteed Technical Particulars uploaded as in DRS (ii) Refer Technical Specification

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 14-Guaranteed Losses

SHEET FOR TECHNOCOMMERCIAL OPENING

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

Bidders Name and Address To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Indhana Bhavana, BANGALORE - 560009

Dear Sir, We Declare that the ratings and performance figures of the HPC conductor furnished by us under the Turnkey Package are Guaranteed. We further declare that in the event of any deficiencies in meeting the guarantees in repect of the characteristics mentioned below as established after conducting the factory test, you may at your discretion,reject or accept the equipment after assessing the liquidated damages as specified in relevant clause of Bid Document.

High Performance Conductor (HPC) for Existing Tower/Supports

Sl.No. Parameters Guaranteed Values Remarks

i) Guaranteed Losses at Temperature corresponding to maximum operating Current of 700A (in kW/km)

ii) Rac ( AC Resistance Per KM guaranteed by the Bidder at maximum continuous operating temperature corresponding to specified continuous operating current of 700A) (in Ohms Per km)

iii) Guaranteed Maximum Continuous Operating Temperature (in Deg C)

iv) Rdc ( DC Resistance Per KM guaranteed by the Bidder at 20 deg C ) (in Ohms Per km)

High Performance Conductor (HPC) for new Transmission lines with new Tower/Supports

Sl.No. Parameters Guaranteed Values Remarks

i) Guaranteed Losses at Temperature corresponding to maximum operating Current of 1400A (in kW/km)

ii) Rac ( AC Resistance Per KM guaranteed by the Bidder at maximum continuous operating temperature corresponding to specified continuous operating current of 1400A) (in Ohms Per km)

iii) Guaranteed Maximum Continuous Operating Temperature (in Deg C)

iv) Rdc ( DC Resistance Per KM guaranteed by the Bidder at 20 deg C ) (in Ohms Per km)

Note: The Technical particulars furnished in this Schedule shall be same as that of Technical particulars furnished in Data Requirement Sheets and GTPs uploaded as per Technical Specifications.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

LIST OF VENDORS

SHEET FOR TECHNOCOMMERCIAL OPENING

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

BIDDERS NAME AND ADDRESS To, The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, Indhana Bhavana Bangalore - 09.

Sl. No. EQUIPMENT/ MATERIAL NAME OF THE VENDOR

VENDOR 1 VENDOR 2 VENDOR 3 VENDOR 4

1 Power Transformers:

2 220kV GIS Equipments (50KA rating):

a) 220kV line (UG Cable) Module

b) 220kV Bus Coupler Module

c) Transformer Module (For 150MVA – 220KV Side)

d) 220kV PT Module

e) Bus Maintenance earth switch 3 Phase, Single pole

f) 20kV SF6 duct

g) 220kV SF6/Air Bushing

3 66kV GIS Equipments (40KA rating):

a) 66kV line (UG Cable) Module

b) 220kV Bus Coupler Module

c) Transformer Module (For 150MVA – 66KV Side)

d) 66kV PT Module

e) Bus Maintenance earth switch 3 Phase, Single pole

f) 66kV SF6 duct

g) 66kV SF6/Air Bushing

h) Transformer Module (66/11kv Side)

4 SF6 Circuit Breakers:

6 Current Transformer:

6 Capacitive Voltage Transformer:

7 Surge Arrestors

8 a) Relay & Protection Panels

9 b) Substation Automation

10 L.T. A.C Panel

11 Station Battery

12 Station Battery Charger

13 PLCC Battery

14 PLCC Battery Charger

15 1.1KV Copper control cables/LT Power Cable

16 66 KV UG Cable

17 11KV U.G Cable

18 PLCC equipment

19 Conductors & Earth Wire a) Bersimis ACSR conductor

b) AAAC Moose Conductor

c) Moose ACSR Conductor

d) Drake ACSR conductor

e) Coyote Conductor

20 Insulators a) 160/120/90KN Disc Insulator Strings

b) Solid Core Insulators

c) Post Insulators

21 Station / Mounting Structures

23 Hardware Materials

24 Aluminium pipe and Clamps

25 AC DISTRIBUTION BOX

26 DC DISTRIBUTION BOX

27 Nitrojen Fire Fighting Protection System

28 Addressible Type Fire Alarm System

29 66kV single core, 1000sqmm UG Cable

30 AC DISTRIBUTION BOX

31 DC DISTRIBUTION BOX

32 Nitrojen Fire Fighting Protection System

33 66kV single core, 1000sqmm UG Cable

34 24F / 48F OPGW Cable

35 220 KV Straight Through Joint

36 220 KV Cable end Terminations Indoor / outdoor

37 66 KV Straight Through Joint

38 66 KV Cable end Termination Indoor / outdoor

39 HPC Conductor 1400A

39 HPC Conductor 700A

40 HPC accessories

Note : Any Other Materials name & its vendors are to be entered.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE-16 : NO DEVIATION CERTIFICATE (ANNEXURE-I)

SHEET FOR TECHNOCOMMERCIAL OPENING

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED.

With reference to our Bid Proposal No dated

We hereby confirm that we have read the provisions of the contract, the stipulation of these clause are acceptable to us,

and we have not taken any deviation whatsoever to these clauses:

a) Terms of payment Clause No. 37 of Section-5,Conditions of Contract (CC) and Clause No.8 of Special Conditions of Contrac (SCC)

b) EMD/Bid Security Clause No. 6, Section :1, Invitation for Tenders (IFT) and Clause No. 13, Section :2, Instruction to Tenderer (ITT)

c) Contract Performance Guarantee Clause No. 29 of Section:2, Instruction to Tenderers (ITT).

d) Penalty for delay Clause No. 41 of Section-5 : Conditions of Contract (CC).

e) Price Basis/ Price adjustment Clause No. 40 of Section-5 :Conditions of Contract (CC).

f) Defects Liability Period/Guarantee Clause No. 10 of Section-5 Special Conditions of Contract (SCC)

g) Work Schedule Clause No.17 of Section:5 Conditions of Contract (CC)

h) Taxes and Duties Clause No. 11.11 of Section-2: Instruction to Tenderers (ITT).

We further confirm that any deviation to the above clauses at SI.No. (a) to (h) found anywhere in our bid proposal, implicit or explicit, shall stand unconditionally withdrawn, without any cost, implication whatsoever to KPTCL.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE-17a FORM FOR BID SECURITY/EMD (ANNEXURE-II) (To be stamped on Rs.300/- Non-Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

SHEET FOR TECHNOCOMMERCIAL OPENING

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE SENT ALONG WITH ORIGINAL BANK GUARANTEE AND ORIGINAL DD (TOWARDS SFMS CHARGES IF ANY) TO CHIEF ENGINEER ELECTRICITY (T&P),KPTCL BANGALORE SO AS TO REACH AFTER THE LAST DATE OF BID SUBMISSION & ON OR BEFORE THE DATE & TIME OF OPENING OF TECHNO COMMERCIAL BIDS.

Ref No. Bank Guarantee No.

In accordance with Invitation to Bid under your specification

No. M/s having its Registered /

Head Office at (hereinafter called the 'Bidder') wish

to participate in the said Bid or and you, as a special favour have agreed

to accept an irrevocable and unconditional bank guarantee for an amount of

valid up to on behalf of Bidder in lieu of the Bid deposit required to be made

by the Bidder as a condition predecent for participation in the said Bid,in addition to the Demand draft No.

we the Bank at having our Head office at

(local address) guarantee and undertake to pay immediately on demand by Karnataka Power Transmission Corporation

the amount of (in figures and words)

without any reservation, protest, demur and recourse. Any such demand made by said `Owner' shall be conclusive and binding on us irrespective of any dispute or difference raised by the Bidder.

This Guarantee shall be irrevocable and shall remain valid up to and including

If any further extension of this guarantee is required, the same shall be extended to such required period (not exceeding one year) on receiving instructions

from M/s on whose behalf this guarantee is issued.

This Guarantee has been issued using SFMS Platform and the requisite communication in this regard has been forwarded to the Beneficiary Bank.

In witness whereof the Bank, through its authorised officer, has set its hand and stamp on this

Signature Signature

Official Addressess Designation with Bank Stamp.

Attorney as per Power of Attorney No.

Note : 1) Both the Bank Guarantee and Demand Draft shall be scanned and uploaded along with Electronic sheets. 2) This date shall be Forty Five (45) days after the last date for which the bid is valid.

Karnataka Power Transmission Corporation Limited

SCHEDULE-17b Form of Insurance Surety Bond towards EMD (ANNEXURE-IIB) (To be stamped on Rs.300/- Non-Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Insurance Surety Bond No.

In accordance with Invitation for Bids under your Bid Document No

M/s having its Registered /

Head Office at (hereinafter called the 'Contractor') wish

to participate in the said Bid for

As an irrevocable Insurance Surety Bond against Bid Security for an amount of * valid for days from **

required to be submitted by the Contractor as a condition precedent for participation in the said bid which amount is liable to be forfeited on the happening of any contingencies as mentioned under the Bidding Documents.

we, the having our Head office at

guarantee and undertake to pay immediately on demand by Karnataka Power Transmission Corporation Limited, (hereinafter called the 'Owner') the amount of

without any reservation, protest, demand and recourse. Any such demand made by the 'Owner' shall be conclusive and binding on us irrespective

of any dispute or difference raised by the Contractor and/or any right/remedy available to the Contractor in terms thereof.

This Insurance Surety Bond shall be unconditional as well as irrevocable and shall remain valid upto

If any further extension of this Insurance Surety Bond is required, the same shall be extended to such required period (not exceeding one year) on receiving instructions from

M/s on whose behalf this Insurance Surety Bond is issued.

In witness where of the Insurer, through its authorised officer, has set its hand and stamp on this

Signature Signature

Official Addressess Designation with Insurer Stamp

Attorney as per Power of Attorney No.

NOTE: 1. (*) The amount shall be as specified in the SPC. (**) This shall be the last date of bid submission deadline. (@) This date shall be Forty Five (45) days after the last date for which the bid is valid 2. The Insurance Surety Bond shall be from an Insurer as per guidelines issued by Insurance Regulatory and Development Authority of India (IRDAI) as amended from time to time. 3. The Owner shall be the Creditor, the Contractor shall be the Principal debtor and the Insurance company/Insurer shall be the Surety in respect of the Insurance Surety Bond to be issued by the Insurer. 4. The Insurance Surety Bond should be on Non-Judicial stamp paper/e-stamp paper of appropriate value as per Stamp Act prevailing in the state(s) where the Insurance Surety Bond is submitted or is to be acted upon or the rate prevailing in State where the Insurance Surety Bond is executed, whichever is higher. The Stamp Paper/e- stamp paper shall be purchased in the name of Contractor /Insurer issuing the Insurance Surety Bond. 5. While getting the Insurance Surety Bond issued, Contractors are required to ensure compliance to the points mentioned in Form of Bank Guarantee/Insurance Surety Bond Verification Check List enclosed in this Section of Bidding Documents. Further, Contractors are required to fill up this Form and enclose the same with the Insurance Surety Bond.

Karnataka Power Transmission Corporation Limited

SCHEDULE-18 PROFORMA OF LETTER OF UNDERTAKINGS (ANNEXURE-V)

SHEET FOR TECHNOCOMMERCIAL OPENING

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE Uploaded

1. I*/We* have read and examined the following bid documents relating to the

(full Scope of Work)

a) Notice Inviitng Tender

b) Conditions of Contract containing section 'Invitation for Tenders’, 'Instructions to Tenderers’, ‘Conditions of Contract’ and Contract Data.

c) Special Conditions of Contract along with Annexure to

d) Drawings No.

e) Technical Specifications

2 . I / We hereby submit our Bid and undertake to keep our Bid Valid for a period of One Hundred and Eighty days (180 days) from the Last date of bid submission as notified (either original or extended). I*/We* hereby further undertake that during said period I/We shall not vary/alter or revoke my/our Bid.

This undertaking is in consideration of KPTCL agreeing to open my/ our Bid and consider and evaluate the same for the purpose of award of Work in terms of provisions of clause entitled "Award of Construct" 'cl.no. 26 of Section ITT of the Bid Documents.

Should this bid be accepted, I*/We* also agree to abide by and fulfil all the terms, conditions of provision of the above mentioned bid.

Signature along with Seal of Co.

(Duly Authorised to sign the Tender on Behalf of the Contractor.)

NAME OF THE COMPANY (in Block Letters)

SIGNATURE Date and Postal Address

DATE Telegraphic Address

NAME AND ADDRESS Telephone No.

Karnataka Power Transmission Corporation Limited

SCHEDULE-19 CONSORTIUM AGREEMENT (To be stamped on Rs.500/- Non Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL(B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024) (ANNEXURE -XIII)

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED IN E-PROCUREMENT PORTAL.

CONSORTIUM AGREEMENT AMONGST M/s M/s

For Bid Specification No. OF KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

This consortium agreement executed on this day Month of Two thousand Twenty six

amongst M/s a company incorporated under the laws of (Country) and having its registered office at

(hereinafter called the "Lead Company" which expression shall include its successors ,executors and permitted assigns),

M/s a company incorporated under the laws of (Country) and having its registered office at

(hereinafter called the "Constituent Company" which expressions shall include its successors,executors and permitted assigns)

for the purpose of making a bid and entering into a contract (In case of award) against the specification no.

For NAME OF THE WORK

for Karnataka Power Transmission Corporation Ltd. having its registered office at Indhana Bhavan, Anand Rao Circle, Bengaluru 560 009 , Karnataka (hereinafter called the "Owner"). The leader of the consortium shall abide by the general terms and conditions specified by the Purchaser. WHEREAS the Owner invited bids as per the above mentioned specifications for the design, manufacture, supply and erection, testing and commissioning of Equipments/Materials stipulated in the bidding documents under subject package

NAME OF THE WORK

AND WHEREAS Section-I ( Volume-1: Clause No. 11:- Qualifying Requirement), forming part of the bidding documents, stipulates that a consortium meeting the requirements of Section-I, ( Invitation of Bid) applicable may bid, provided the Consortium fulfills all other requirements of specification and in such a case, the Bid shall be signed by the members so as to legally bind the members and who will be jointly and severally liable to perform the Contract and all obligations hereunder.

The above clause further states that the consortium agreement shall be attached to the bid and the contract performance guarantee will be as per the format enclosed with the bidding document without any restriction or liability for either party.

AND WHEREAS the bid has been submitted to the Owner vide proposal No dated

by Lead Company based on the Constituent agreement between all the consortium under these presents and the bid in accordance with the requirements of Specifications (Qualification Requirements).

NOW THEREFORE THIS UNDERTAKING WITNESSETH AS UNDER:

In consideration of the above premises and agreements all the partners to this consortium members do hereby now agree as follows:

1 In Consideration of the award of the Contract by the Owner to the Consortium members, we , the members to the consortium agreement do hereby agree that M/s

shall act as Lead Company and further declare and confirm that we shall jointly and severally be bound up to the Owner for the successful performance of the contract and shall be fully responsible for the design, manufacture, supply and successful performance of the equipments in accordance with the Contract.

2 In case of any breach of the said contract by the Lead company or other constituent of the Consortium agreement, the Lead company do hereby agree to be fully responsible for the successful performance of the contract and to carryout all the obligations and responsibilities under the contract in accordance with the requirements of the Contract

3 Further, if the Owner suffers any loss or damage on account of any breach in the contract or any shortfall in the performance of the equipment in meeting the performance guaranteed as per the specification in terms of the contract, the Lead company of these presents undertake to promptly make good such loss or damages caused to the Owner, on its demand without any demur. It shall not be necessary or obligatory for the Owner to proceed against Lead Partner to these presents before proceeding against or dealing with the other Partner (s).

4 The Financial liability of the members of the consortium agreement to the Owner, with respect to any of the claims arising out of performance or non-performance of the obligations set forth in the said agreement, read in conjunction with the relevant conditions of the contract shall, however not be limited in any way so as to restrict or limit the liabilities of any of the members of the agreement.

5 It is expressly understood and agreed between the members to this consortium agreement that the responsibilities and obligations of each of the partners shall be as delineated hereunder (To be incorporated suitably by the member to this agreement). However, each member of the consortium will be severally and jointly responsible for the faithful performance of the contract. It is further agreed by the member that the above sharing of responsibilities and obligations shall not in any way be a limitation of joint and several responsibilities of the members under this contract.

Sl.No. Name of the Lead Bidder/Consortium Partner. Scope of the work/Participation

We further declare ourselves bound to execute our scope of work/participation as stated above;

6 This Consortium agreement shall be constructed and interpreted in accordance with the laws of India and the courts of Bangalore shall have the exclusive jurisdiction in all matters arising there under.

7 7) In case of an award of a Contract, we the Consortium members do hereby agree that we shall be jointly & severally responsible for the works respectively executed and Lead company shall furnishing a contract performance security from a bank/Insurer in favor of the PURCHASER in the forms acceptable to purchaser for value of Five percent (5%) of the Amount put to tender (Excluding GST) plus additional security for unbalanced tenders in accordance with Clause 29 of Instructions To Tenderers (ITT).

8 It is further agreed that the Consortium agreement shall be irrevocable and shall form an integral part of the contract, and shall continue to be enforceable till the owner discharges the same. It shall be effective from the date first mentioned above for all purposes and intents.

IN WITNESS WHEREOF the partners to the Consortium have through their authorized representatives executed these presents and affixed Common seals of their companies, on the day, month and year first mentioned above.

WITNESS for Lead Company

(Signature) (Signature of the authorized representative)

(Name in Block Letters) (Name)

Designation (Designation)

Common Seal of the Company

2 ( For Constituent 1)

(Signature of the authorized representative)

(Name in Block Letters) (Name)

Designation Common Seal of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE-20(a) POWER OF ATTORNEY (ANNEXURE-XI)

(For Individual Bidder / Lead Partner of Consortium)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

POWER OF ATTORNEY

(To be stamped on Rs.500/- Non Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

KNOW ALL MEN BY THESE PRESENTS that we

a Company incorporated

under the laws of

and having its Registered Office / Head Office at

"Manufacturer / Bidder" which expression shall unless repugnant to the

Context or meanig thereof, include its successors, administrators and assigns)

acting through Mr its constitute, nominate and appoint

M/s a Company incorporated under the laws of

and having its Registered / Head Office at

as its duly constituted lawful Attorney (hereinafter called "Attorney"

or "Authorized Representative") to exercise all or any of the powers for and on

behalf of the "Manufacturer / Bidder" in regard to Specification No.

the bids for which have been invited by

(Address "Owner") to undertake the following acts:

i. To submit proposal and participate in the aforesaid Bid Specification of the Owner on behalf of the "Manufacturer / Bidder".

ii. To negotiate with the "Owner" the terms and conditions including price for award of the contract pursuant to the aforesaid Bid and to sign the contract with the "Owner" for and on behalf of the Manufacturer / Bidder.

iii. To receive accept and execute the contract for and on behalf of the "Manufacturer / Bidder".

iv. To do any other act or submit any document related to the above.

It is expressly understood that the Power of Attorney shall remain valid, binding and irrecoverable till submission of the Contract performance guarantee in terms of the Contract. The "Manufacturer / Bidder" hereby agrees and undertakes to ratify and confirm all the whatsoever the said "Attorney" / "Authorised Representative" quotes in the Bid, negotiates and signs the contract with the "Owner" and / or purports to act on behalf of the "Manufacturer / Bidder" by virtue of this Power of Attorney and the same shall bind the "Manufacturer / Bidder" as if done by itself.

IN WITNESS WHEREOF THE "Manufacturer / Bidder" has executed these presents at

on this day of under

the Common Seal of the Manufacturer company / Bidder.

Specimen Signature of Attorney Holder

(Name & Designation)

For and on behalf of

Common Seal of the above Manufacturer/Bidder

Has been affixed thereto in the presence of :

Karnataka Power Transmission Corporation Limited

SCHEDULE-20(b) POWER OF ATTORNEY (ANNEXURE-XV)

(FOR CONSORTIUM MEMBER)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

POWER OF ATTORNEY

(To be stamped on Rs.500/- Non Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

KNOW ALL MEN BY THESE PRESENTS that we

a Company incorporated

under the laws of

and having its Registered Office / Head Office at

"Manufacturer / Bidder" which expression shall unless repugnant to the

Context or meanig thereof, include its successors, administrators and assigns)

acting through Mr its constitute, nominate and appoint

M/s a Company incorporated under the laws of

and having its Registered / Head Office at

as its duly constituted lawful Attorney (hereinafter called "Attorney"

or "Authorized Representative") to exercise all or any of the powers for and on

behalf of the "Manufacturer / Bidder" in regard to Specification No.

the bids for which have been invited by

(Address "Owner") to undertake the following acts:

i. To submit proposal and participate in the aforesaid Bid Specification of the Owner on behalf of the "Manufacturer / Bidder".

ii. To negotiate with the "Owner" the terms and conditions including price for award of the contract pursuant to the aforesaid Bid and to sign the contract with the "Owner" for and on behalf of the Manufacturer / Bidder.

iii. To receive accept and execute the contract for and on behalf of the "Manufacturer / Bidder".

iv. To do any other act or submit any document related to the above.

It is expressly understood that the Power of Attorney shall remain valid, binding and irrecoverable till submission of the Contract performance guarantee in terms of the Contract. The "Manufacturer / Bidder" hereby agrees and undertakes to ratify and confirm all the whatsoever the said "Attorney" / "Authorised Representative" quotes in the Bid, negotiates and signs the contract with the "Owner" and / or purports to act on behalf of the "Manufacturer / Bidder" by virtue of this Power of Attorney and the same shall bind the "Manufacturer / Bidder" as if done by itself.

IN WITNESS WHEREOF THE "Manufacturer / Bidder" has executed these presents at

on this day of under

the Common Seal of the Manufacturer company / Bidder.

Specimen Signature of Attorney Holder

(Name & Designation)

For and on behalf of

Common Seal of the above Manufacturer/Bidder

Has been affixed thereto in the presence of :

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNOCOMMERCIAL OPENING (UN - PRICED)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

Bidders Name and Address

To, The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, Bangalore - 09.

We Declare that the ratings and performance figures of the equipment furnished by us under the Turnkey Package are Guaranteed. We further declare that in the event of any deficiencies in meeting the guarantees in repect of the characteristics as established after conducting the performance test, you may at your discretion, reject the equipment, in which case we shall replace the same with equipment as per specification and meeting the guarantee, free of charge and within a resonable time, to be mutually agreed.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE -22- Check List

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

BIDDERS NAME AND ADDRESS To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavan, Anand Rao Circle, Bengaluru - 560009

CHECK LIST FOR SUBMISSION OF SCHEDULES

REFERENCE OF FORM & SCHEDULE DETAILS OF FORM & SCHEDULE WHETHER INCLUDED IN TECHNO-COMMERCIAL SHEETS (ELECTRONIC) YES/NO WHETHER INCLUDED IN Percentage-Wise Bid Financial Offer (ELECTRONIC) YES/NO WHETHER INCLUDED IN COMMERCIAL

PROPOSAL BID PROPOSAL

Schedule - 1 PRICE COMPONENTS

Schedule 2 (1 of 2 & 2 of 2) Summary of Price Components

Schedule 2A Schedule of Discounts

Schedule 2B Statement of Commercial Terms & Conditions

Schedule 3A & 3B Price break up for supply & erection

Schedule 3C Price break up for civil works

Schedule 4 Price break up for mandatory spares and maintenance & Testing Equipments.

Schedule 5 Commercial deviations

Schedule 6 Technical deviations

Schedule 7 List of special Tools & Tackles

Schedule 8 Additional information.

Schedule 9 Qualification Information [Technical & Financial]

Schedule 10 Details of Tools and plants and man power deployment

Schedule 11 A & 11B Schedule for activities & Commissioning.

Schedule 12 Type Test Charges

Schedule 13 List of optional spares and cost.

Schedule 14 Guaranteed loss of transformer.

Schedule 15 List of vendors.

Schedule 16 Annexure 'A' No deviation certificate

Schedule 17a & 17b Proforma for Bid guarantee

Schedule 18 Proforma for letter of undertaking

Schedule 19 Consortium Agreement

Schedule 20a & 20b Power of attorney for Individual Bidder / Lead Partner of Consortium and Consortium Member

Schedule 21 Guaranteed Declaration

Schedule 22 Check list

DRS 1-42 Relevant Technical details for Materials / Equipments

To be Uploaded Contract Quality Assurance Programme

To be Uploaded Type Test Certificates

To be Uploaded & furnished Bid Security/EMD

To be Uploaded Written Power of Attorney

To be Uploaded Letter of Undertaking

To be Uploaded No Deviation Certificate

To be Uploaded Any Other (Please Specify)

To be Uploaded Any Other (Please Specify)

To be Uploaded Any Other (Please Specify)

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3783

a. Upgradation of existing 2x20MVA, 66/11KV Hirehalli sub-station to 2x150 MVA, 220/66/11kV GIS sub-station in Tumakuru taluk & district. b. Construction of 220kV SC LILO Line from existing 220kV KB Cross-Nelamangala (B2) Line to proposed 220/66/11kV Hirehalli GIS sub-station using Drake Equivalent HPC conductor for a distance of 0.805 kms (in the existing corridor of 66kV Hirehalli-Honnudike & 66kV Hirehalli-Brindavan line) in Tumakuru taluk & district. c. Providing Single Circuit link from proposed 220/66/11KV Hirehalli GIS substation up to tapping point of 66kV Honnudike substation and linking to existing line connecting 66kV Honnudike substation (Providing radial connectivity to existing 66/11kV Honnudike sub-station) partially using 1000 Sq.mm UG cable in new corridor & partially using Coyote ACSR conductor in existing corridor in Tumakuru Taluk & District. (I) OVERHEAD LINE PORTION: 3.867KM WITH COYOTE ACSR CONDUCTOR (II) 66kV EHV UG cable portion :1.6 kms d. Strengthening of existing 66kV SC Hirehalli-Urdigere-Kolala-Dabaspete Line using HPC of Ampacity 700 Amps for a distance of 43.101 Kms in Tumkur District & Bengaluru Rural District. i. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV SC Towers in the existing corridor from proposed 220/66/11kV Hirehalli GIS substation to existing 66/11kV Kolala substation in Tumkur district for a distance of about 17.676 kms. ii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from Urdigere LILO point to 66/11kV Urdigere Substation for a distance of about 2.359 kms in Tumkur district. iii. Replacement of existing Coyote ACSR conductor by HPC of Ampacity 700 Amps on existing 66kV DC towers from 66/11kV Kolala substation to 220/66kV Dabaspete substation in Tumkur & Bengaluru Rural District for a distance of about 23.066 kms.

DRS - 1 (1of 3) (150 MVA Tr.)

A1 : GUARANTEED TECHNICAL PARTICULARS FOR POWER TRANSFORMERS - 220/66/11kV, 150MVA

(Bidder should indicate the guaranteed technical data of all equipments/materials for each type of rating separately)

Class of Power Transformer

1 Name of the Manufacturer and country of origin

2 Reference standard

3 Service [Indoor/outdoor]

4 Continuous rating under conditions specified in IS-2026 Part-I, 1977 Clause No.3 : HV

a. 1. With ONAN cooling - MVA

2. With ONAF cooling - MVA

3. With OFAF cooling - MVA

b. Rated no load voltage

6 a. Rated Frequency : (Hz)

b. Number of phases

7 Current at rated voltage and on principal tap-Amp :HV

8 Maximum hot spot temperature rise calculated by formula Deg C

9 Flux density at rated voltage and rated frequency in tesla

10 Temperature rise of top oil, oC by the thermometer.

11 Temperature rise of winding measured by resistance.

a. With ONAN cooling oC

b. With ONAF cooling oC

c. With OFAF cooling oC

d. Period of operation of transformer at full load without calculated winding hot spot temperature exceeding 140oC and when

50% coolers fail

100% coolers fail (refer clause no. 7.9)

12 No. of windings

13 Connections HV

14 Connection Symbol and vector group

a. Type of tap changer

b. Tap step (percent)

c. Total tap range (+) percent to (-) percent

d. Tappings provided at

e. Type of regulation :

Constant flux regulation

Variable flux regulation

Combined regulation

16 (A) Magnetisation data at no load, at rated frequency (along with tolerance if any)

a. Current in Amps

b. Power factor

c. Loss in KW (core loss + dielectric loss)

d. Max. flux density in lines/sq.cm.

i. At 90% rated no load voltage

ii. At 100% rated no load voltage

iii. At 110% rated no load voltage

iv. At maximum rated primary voltage (i.e. 105% rated no load voltage)

16 (B) i) Max.No-load loss at rated frequency at Principal Tap (KW) 0

ii) Max. No-Load loss at voltage corresponding to the Highest Tap (KW)

17 Max. Load loss in KW at rated current and at 75◦C At lowest tap At principal tap At highest tap

a. For ONAN rating in KW

b. For ONAF rating in KW

c. For OFAF rating in KW 0

Max. I2R loss in KW at rated current and at 75◦C

a. For ONAN rating in KW

b. For ONAF rating in KW

c. For OFAF rating in KW 0

Max. Auxiliary Loss at rated Voltage & frequency 0

Note for Sl. No. 16 & 17: Guaranteed values of the losses shall be indicated which shall be firm & without indicating the tolerance limit.

18 Impedance at rated current and frequency at 75oC on Line MVA base. HV to IV HV to LV IV to LV

a. At normal tap in %

b. At max. voltage tap in %

c. At min. voltage tap in %

19 Reactance at rated current and frequency and normal tap on rated MVA base:

20 Zero sequence impedance at reference temperature of 75oC at principal tap ………….%

NOTE: 1) The above impedance values shall be achieved with the winding arrangement at the discretion of the manufacturer without using reactor for 220/66/11kV, 100MVA & 150MVA Transformers. 2) The above impedance values shall be achieved with the winding arrangement for 150MVA, 220/66/11kV Auto Transformer as follows: CORE – LV – IV – Regulating – HV without using reactor. 3. The tolerance for the above impedance values shall be as per IS 2026- Part I (2011) or latest version

21 Resistance at 75oC

HV winding in Ohms in %

IV winding in Ohms in %

LV winding in Ohms in %

22 Efficiency at 75oC as derived from guaranteed.loss figures At Unity p.f At 0.8 p.f

a. At 125% full load

b. At 100% full load

c. At 75% full load

d. At 50% full load

23 a. Maximum efficiency ………….%

b. Load at which maximum efficiency occurs (% of full load)

24 Regulation at full load and at 75oC

a. At unity p.f. in %

b. At 0.8 p.f. (lag) in %

25 a. Short time thermal rating of LV winding/tertiary winding in KA & duration in seconds.

b. Short time thermal rating of IV windidng in KA & duration in seconds.

c. Short time thermal rating of HV winding in KA & duration in seconds.

26 Permissible overloading - HV

27 Test voltages HV IV LV

a. Lighting impulse withstand kV (peak)

b. Power frequency voltage withstand kV (ms)

c. Switching impulse withstand kV (peak)

28 Partial discharge level at 364 kV as per IEC 44(4)

29 RIV at 1.1 times minimum phase to ground voltage

30 Design value of surges transferred on tertiary terminals.

a. For 950 kV peak. 1.2/50 micro second surge striking HV terminal and with :

i. Both the open delta tertiary terminals open kV (peak).

ii. One of the open delta tertiary terminals earthed kV (peak).

b. For 550/325 kV peak 1.2 / 50 micro second surge striking IV terminal & with :

i. Both the open delta tertiary terminals open kV (peak).

ii. One of the open delta tertiary terminals earthed k V (peak).

31 Noise level when energised at normal voltage and normal frequency at no load (db)

32 External short circuit withstand capacity (MVA) & duration (seconds)

33 Over flux withstand capability of the transformer :

34 Insulating and cooling medium

35 Approximate weights

b. Windings (Kg)

c. Tank & Fittings (Kg)

e. Untanking weight (Kg)

f. Total weight (Kg)

36 Required quantity of oil in litres

37 Terminal arrangement

ADDITIONAL TECHNICAL PARTICULARS:

1 Details of Core (along with Tolerance if any):

a. Type of core configuration

b. Type of core joints

c. Flux density at 90% of rated voltage and frequency Tesla :

d. Flux density at 110% of rated voltage and frequency. Tesla :

e. Material of core lamination

f. Approximate core weight

g. Type of Joints used between core limb and yoke

2 Details of Windings:

a. Conductor area in sq.cm and current density in Amps/Sq.cm (at rated current). Current density A/sq. cm Conductor area sq.cm

b. Material of winding conductor

c. Approximate weight of winding (along with tolerance if any)in kgs Kgs

d. Type of windings

e. Winding insulation Type and class Graded or ungraded

f. i. Insulating material used for :

1. Regulating winding

ii. Between HV and IV and LV as applicable

iii. Between core & LV side.

iv. For core bolts, washers and end plates

v. Regulating winding & earth.

g. i. Type of axial coil support

ii. Type of Radial coil support :

h. Core bolt insulation voltage

i. Details of special arrangement provided to improve surge voltage distribution in the windings

j. Approximate weight of winding (Kgs) (Tolerance if any on the above)

k. Minimum clearance (mm) In oil In Air

Between Phases Phase to ground Between Phases Phase to ground

3 Details of Tank :

a. Material for Transformer Tank

b. Type of the tank

c. Mininum thickness of sheet

ii. Bottom (mm)

iii. Cover (mm)

iv. Cooling tubes/Radiators (mm)

d. Vacuum recommended for hot oil circulation (torr)

e. Vacuum to be maintained during oil filling in transformer tank (torr)

f. Vacuum to which the tank can be subjected without distortion (torr)

Transverse Axis Longitudinal Axis

g. No. & size of bi-directional wheels provided.

h. Track gauge required for the wheels

4 Details of painting at works and site

5 (a) Minimum clear height for lifting bell and for lifting core & windings from tank (mm) (untanking height).

(b) Minimum clear hieght for lifting (mm)

II. Bushings - HV

- HV / IV Neutral

6 Shipping details :

i. Parts detached for transport

ii. Weight of heaviest package in Kgs

iii. Weight of other heavy packages in Kgs

iv. Dimensions of largest package

a. Length in mm

b. Breadth in mm

c. Height in mm

v. Dimensions of other heavy packages:

a. Length in mm

b. Breadthin mm

c. Height in mm

7 Details of Bushings HV IV LV Neutral

b. Rated voltage class - KV

c. Rated current - Amps

d. Power frequency, visible corona discharge voltage - kV (ms)

e. One minute dry withstand power frequency voltage - kV (ms)

f. One minute wet withstand power frequency voltage - kV (ms)

g. Under oil Flashover or Puncture power frequency voltage - kV (ms)

h. 1.2 / 50 ms. Lighting impulse withstand voltage - kV (Peak)

i. Switching surge withstand voltage - kV (peak)

j. Under oil Flashover or puncture impulse voltage - kV (peak)

k. (a) Creepage Distance in air

(b) Creepage Distance (protected)

l. Quantity of oil in bushing and specification of oil used (Kgs)

m. Whether test tap is provided

n. Weight of assembled bushing

o. Phase to earth clearance in air of live parts at the top of bushing.

8 Cooling system

a. Grade of oil

b. Total weight of oil in radiator in Kgs/litres

c. Total weight of radiator without oil in Kgs.

d. Total radiating surface in square meters

e. Method of drying out transformer at site

f. Type and make of material used for the radiators with size.

g. Type of radiator

h. Total number of Radiators/Banks for transformer and over all dimensions.

i. Rating of Transformer with one radiator bank out of service.

j. Total weight of radiators in Kgs

k. Type of mounting

l. Vacuum withstand capability

9 Cooling equipment Fan Motor Pump Motor

a. Make and Type (Details)

b. Number of connected units (nos.)

c. Number of standby units (nos.)

d. Rated Power (KW)

e. BHP of driven equipment

f. Capacity (cu m/min) or (Litres/Minute)

g. Rated voltage (Volts)

h. Locked rotor current (Amps)

i. Temperature range for which control is adjustable

j. Efficiency of motor at full load (percent)

k. Temp. rise of motor at full load (oC)

l. Whether the fan and/or pumps suitable for continuous operation at 85% of their rated voltage

m. Estimated time constant in hours for

i. Natural cooling

ii. Forced air cooling

10 On Load Tap Changing gear

c. Power flow (uni-directional or bidirectional or restricted bi-directional)

d. Rated voltage to Earth kV

e. Rated maximum current Amps

f. Step voltage V.

g. Number of steps

h. Control : Manual / Auto / Local / Remote / Independent / Parallel.

i. Auxiliary supply details

j. Voltage control (whether automatic or manual)

k. Line drop compensation Provided / Not provided.

l. Protective devices

m. Time for complete tap change (one step) sec.

n. Divertor selector switch Transient time - Cycles.

o. Value of maximum short circuit current Amps.

p. Maximum impulse withstand test voltage with 1.2/50 micro seconds full wave between switch assembly and earth (kV peak)

q. Maximum power frequency test voltage between switch assembly and earth - kV rms.

r. Maximum impulse withstand test voltage with 1.2/50 micro seconds across the tapping range (kV peak).

s. Approximate over all dimensions of Tap Changer in mm.

t. Approximate over all weight Kgs.

u. Approximate over all quantity of oil-ltrs/Kgs.

v. Particulars of the OLTC control panel for installation in the control room.

11 Over all dimensions of transformer including cooling gear, tap changing gear etc.

d. Reference drawing No.

12 Whether oil temperature indicator provided (Yes/No).

13 Type of oil level indicator and whether supervisory alarm contact for low oil level provided (Yes/No)

14 Type and size of Gas operated relay and whether supervisory alarm and trip contacts provided and their size and Nos.

15 Temperature indicators Oil Temp. indicator Winding temp. indicator

a. Make and Type

b. Permissible setting ranges for alarm & trip.

c. No. of contacts

d. Current rating of each conntact

e. Whether remote indicator provided, if, so, whether equipment required at purchaser's control room is included.

f. Size and No.

16 Ratio and Type of CT used for winding temperature

17 Type and size of Thermostat used

For Tr. Tank OLTC

18 No. of Breathers provided (No.)

19 Type of deehydrating agent used for breathers

20 a. Capacity of conservator vessel litres

b. Volume between the highest and lowest visible oil level (litres)

21 Valve sizes and number required/ fitted

a. Drain valves - mm - No.

b. Filter valves - mm - No.

c. Sampling valves - mm - No.

22 a. Type and make of pressure relief device

b. No. of each type of devices per transformer unit (Nos.)

c. Minimum pressure at which the device operates (Kpa)

23 Details of current transformers provided for tertiary

a. Type and voltage class

b. No. of cores (Nos.)