SUPPLY AND INSTALLATION OF CHILDREN PLAY EQUIPMENTS IN SOUTH ZONE, SOUTH EAST ZONE AND SOUTH WEST ZONE, UNDER MPLADS FUNDS FOR VARIOUS LOCATIONS OF PARKS IN MUNICIPAL CORPORATION OF DELHI.

SUPPLY & INSTALLATION OF MULTIPURPOSE PLAY SYSTEM (ROTO HEX DECK WITH CANOPY, OCTAGONAL DECK) HEX DECK WITH CANOPY : 1 NO. OCTAGONAL DECK : 1 NO. DOUBLE WAVE SLIDE: 1 NO. SPIRAL SLIDE: 1 NO. ROCK CLIMBER: 1 NO. STAIR CASE: 1 NO. S BRIDGE LADDER: 1 NO. PLAIN BRIDGE: 1 NO. SLIDE ENTRY : 1 NO. CURVE SLIDE: 1 NO. BRIDGE LADDER: 1 NO. TWO SEAT SWING: 1 NO. BUTTERFLY: 2 NOS. SUN FLOWER : 2 NOS. ROTO RAILING BIG &SMALL. MAIN FRAME OF MPPS IS OF DIA 80MM NB GI PIPE. DOUBLE WAVE SLIDE SUPPORT FRAME IS MADE FROM DIA 25MM NB GI PIPE. SPIRAL SLIDE SUPPORT PIPE IS OF DIA32 NB GI PIPE. SPIRAL SLIDE CENTRE PIPE IS OF DIA 80 NB GI PIPE. S BRIDGE LADDER FRAME IS MADE OF DIA 32MM NB GI PIPE. BRIDGE LADDER FRAME IS MADE OF DIA 32MM NB GI PIPE. THE MAIN FRAME OF TWO SEAT SWING IS MADE OF DIA 40MM NB GI PIPE. THE HORIZONTAL DIAMETER 50MM NB G.I. PIPE. M.S. NUT BOLTS WITH ZINC PLATING ARE USED FOR ASSEMBLY. POWDER COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF DOUBLE ARCH SWING.LEG SUPPORT :80 MM NB PIPE. SEAT- ANTI SKID RUBBER BELT. BEARING : HEAVY DUTY BALL BEARING. AREA : 6.0 M X 1.5 M. HEIGHT : 2.6 M. TOP BAR :50 MM NB PIPE. SUSPENSION: 6 MM RUBBER COATED CHAIN. IN THIS ONE CHILD CAN ENJOY THE SWING AT ONE TIME. THE ARCH SHAPED SIDE FRAME SHALL BE MADE OF 80MM NB B CLASS GI PIPE SHALL BE MADE UP OF 50MM NB B CLASS GI PIPE. THE FRAME SHALL BE POWDER COATED TO GIVE AN AESTHETIC LOOK. THE SWING SHALL BE MADE UP OF 10MM THICK ANTI SKID RUBBER TOP THE RUBBER BELT SEAT/ U SHAPE SWING SEAT WITH 2 EYE BOLT TYB-S06. MADE OF POLYURETHANE OF SIZE：53 X 20.5 X 20 SHALL BE SUSPENDED ON 6MM RUBBER COATED GI CHAIR. THE BAIL BEARINGS SHALL BE MOUNTED INSIDE A SPECIALLY DESIGNED NYLON CLAMP. POWDER COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF DOUBLE ARCH SWING.LEG SUPPORT :80 MM NB PIPE. SEAT- ANTI SKID RUBBER BELT. BEARING : HEAVY DUTY BALL BEARING. AREA : 6.0 M X 1.5 M. HEIGHT : 2.6 M. TOP BAR :50 MM NB PIPE. SUSPENSION: 6 MM RUBBER COATED CHAIN. IN THIS ONE CHILD CAN ENJOY THE SWING AT ONE TIME. THE ARCH SHAPED SIDE FRAME SHALL BE MADE OF 80MM NB B CLASS GI PIPE SHALL BE MADE UP OF 50MM NB B CLASS GI PIPE. THE FRAME SHALL BE POWDER COATED TO GIVE AN AESTHETIC LOOK. THE SWING SHALL BE MADE UP OF 10MM THICK ANTI SKID RUBBER TOP THE RUBBER BELT SEAT/ U SHAPE SWING SEAT WITH 2 EYE BOLT TYB-S06. MADE OF POLYURETHANE OF SIZE：53 X 20.5 X 20 SHALL BE SUSPENDED ON 6MM RUBBER COATED GI CHAIR. THE BAIL BEARINGS SHALL BE MOUNTED INSIDE A SPECIALLY DESIGNED NYLON CLAMP. POWDER COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF FOUR SEATED MERRY GO ROUND. AREA: 1.5 M. HEIGHT – 0.8 M. SEAT – MOULDED F.R.P. MAIN FRAME: 40 NB G.I. PIPE. BEARING : HEAVY DUTY BEARING. MS PLATE: 250X10MM. SUPPORT PIPE- 80NB. THE TOPCOAT IS DULY POWDER COATED. THE ITEM SHALL BE HAVING ITS MAIN FRAME MADE UP OF 25 & 40. MM NB “B” CLASS G.I. PIPE. THE STAND SHALL BE MADE IN 80 MM NB “B” CLASS G.I. PIPE. THE WHOLE STRUCTURE SHALL BE MOUNTED ON HEAVY DUTY BEARING SHAFT. THE BEARING USED SHALL BE OF HEAVY DUTY BEARING PERMANENTLY LUBRICATED WITH WATER SEALANT. THE SEAT FRAME SHALL BE MADE OUT OF FRP (FIBRE REINFORCED PLASTIC)/LLDPE (LOW LINEAR DENSITY PLOY ETHYLENE). THE SEATS SHALL HAVE HANDRAILS SO THAT THE CHILD DOES NOT FALL. IT SHALL ACCOMMODATE 4 CHILDREN AT A TIME. THE POWDER COATING SHALL BE DONE ON THE PIPES TO AVOID RUSTING. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF CROSS &ZERO AREA :0.6 M X 0.6 M. HEIGHT : 1.00 M. TRIANGULAR CROSS AND ZEROS ARE MADE FROM LLDP/PP MATERIAL WHICH HAVING IN BUILT CROSS AND ZEROS EMBOSSED. -THE SUPPORT FRAME IS MADE UP FROM 25MM NB MEDIUM CLASS G.I. PIPE. THERE SHALL BE TWO SEATS PROVIDEDWHICH SHALL BE MADE OUT OF MOULDEDPLASTIC IN ROTO MOLDING PROCESS. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF ZIG ZAG BALANCE BEAM:LENGTH 4M X WIDTH 101.6 MM X HEIGHT 457.2 MM NB "B" CLASS G.I. PIPES. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE (AS PER DIRECTION OF OFFICER IN CHARGE.)

ANIMAL MERRY GO ROUND.AREA : Ø 1.5 M. HEIGHT – 0.8 M. SEAT – ROTO MOULDED PVC ANIMAL SHAPE. MAIN FRAME: 40NB G.I.PIPE. BEARING: HEAVI DUTY BEARING. MS PLATE: 250X10MM. SUPPORT PIPE- 80NB. THE TOPCOAT IS DULY POWDER COATED. The Main Frame Of The Animal Merry Go Round Shall Be Made Up Of 25 & 40 NB B Class GI Pipes. The Stand Shall Be Made In 80 NB B Class GI Pipe. The Whole Structure Shall Be Mounted On Heavy Duty Bearing Shaft Permanently Lubricated With Water Sealant. The Animal Shall Be Made Out Of FRP (Fibre Reinforced Plastic)/LLDPE (Low Linear Density Poly Ethylene). It Shall Accommodate 4 Children At A Time. The Pipes Shall Be Powder Coated To Prevent Rusting. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)

SUPPLY AND FIXING OF HALF ROUND NET.AREA : 3.3 M X 1.7 M. HEIGHT : 2.1 M. THE MAIN FRAME VERTICAL PIPES OF STRAIGHT NET CLIMBERARE MADE FROM 50 MM NB B CLASS GI PIPE. -THE CURVE PIPES ARE MADE FROM 32 MM NB B CLASS GI PIPE.  -THE JOINT BALLS SHALL BE MADE FROM LLDPE (LOW LINEAR DENSITY POLYETHYLENE) /PP(PURE PROPYLENE) MATERIAL WITH GRIP SCREWS PROVISION FOR ROPE HOLDING. -O HOOKS OF THE FRAME HAVING 50MM BENDING DIA AND ROD DIA 8MM. -THE LOOP SHALL BE GIVEN TO THROUGH O HOOKS  TO GET A GRIP WHILE CLIMBING. -ROPE USED OF PP NYLON MIX TYPE HAVING 22 MM DIAMETER. POWDER COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)

SPIRAL SLIDE. LADDER-FRAME- 25M M N B PIPE. HANDRAIL - 20 MM N B PIPE. CENTRE SUPPORT- 50 MM N B PIPE. AREA : 2.5 M X3.5 M. PLATFORM HEIGHT : 2.1 M. CHUTE F R P THE TOPCOAT IS DONE USING THE BEST QUALITY BRAND OR DULY POWDER COATED. Spiral Slide Shall Be Chute Made Of FRP (Fiber Reinforced Plastic / LLDPE (Low Linear Density Poly Ethyline) Having Thickness Of 4mm Slide Center Support Shall Be 80mm NB B Lass GI Pipe. Landing Module Shall Be Supported By 20mm NB B Class GI Pipe. Slide Extension Platform Shall Be Made From FRP / LLDPE. The Railing Shall Be Made From 15mm NB And 20nn NB B Class GI Pipe. All Pipes Shall Be Coated With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)