SPL REPAIR TO TOILETS IN MT AREA AND TOILETS OF BLDG NO P 1337, P 1299 AND P 1323 OF 234 ARMD ENGR REGT AND PROVN OF IRON GRILL ON THE DRAINAGE LINE OF ALL SQN COOK HOUSE BLDG NO P 201 TO P 204 OF 7 LT CAV AT HISAR MIL STN UNDER GE HISAR

Amount

Taking down cement plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc .

Demmolition of Brickwork or masonry, built in cement mortar including all quoins, arches, pillars, etc,all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed.

Demolition of reinforced cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed.

Taking down chowkat or frame with shutters area not exc. 1.5 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts complete all as specified

All asper item here in before but exe 1.5 Sqm but n exe 5.0 Sqm

M&L MS work as in doors or gates frames for grills/ guard bar of angle or other section with gusset plate rail braces etc conforming to FE 410 -0 OR 310-0.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete

S&F factory made Steel windows, ISI marked,(Z-Section with side hung shutters including box type hinges with steel handle etc complete with glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete. Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Glass pane/wire gauze shall be measured and paid separately.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 35mm thick plain framed paneled shutters (any number of panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces including moldings fixed to chowkats, of 2nd class Hard wood factory made shutter all as specified.

M&L providing two coats of synthetic enamel paint over new surface of wood or wooden based surfaces over a coat of pink primer including preparation of surface of any description not exceeding 10 cm width or girth all as specified .

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, complete, all as specified & directed.

S & F 4mm thick sheet glass ordinary quality .Figured glass, pin headtype and glazing with oil putty squares n exc 0.5 sq. m in each

M & L brick work with subclass 'B' bricks straight or curved on plan exc 6 m mean raidus built in cm 1:6 all as specified.

M&L brick work with subclass 'B' old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified.

M&L Providing precast cement concrete (nominal mix) Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in manwhole covers and similer items and set in CM 14

M & L mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified .

M&L Rough cast plaster as specified .(Rendering coat not less than 10mm thick in C:M 1:3 , while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished eaven)& two coat of cement base paint over a coat of white wash with preperation.

M&L for PCC 1:4:8 type D2 as in foundation and mass concrete all as specified .

M&L rendering 15 mm thick in cm 1:6 on brick wall surface finished even and smooth without using extra cement..

M&L for preparation of newly plastered surfaces of wall & applying two coats of OBD of approved shade/tint over a coat of primer on walls all as specified & as directed.

M&L Rendering 15 mm thick in cement mortar 1:4 plaster on fair faces of brick work or cement concrete surfaces, finished even and smooth without using extra cement.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of primer on walls all as specified & as directed.

Supply only water proofing compound

M&L for 50 mm thick cement concrete 1:2:4 type B2, in plinth protection finished even and smooth without using extra cement.

S&F stainless steel butt hinges, medium weight, cold rolled mild steel size of hinges 100mm.

S&F aluminium anodised barrel tower bolts of extruded section size 150 mm.

Supply & fixing aluminium handle 150mm size cast type, anodized complete all as specified.

M&L for coloured Non skid ceramic tiles 7 to 8mm thick , area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 all as specified.

M&L coloured glazed ceramic tiles as on vertical surface of the 450 mm x 300 mm x 7 mm such as in skirting dado etc set and jointed in neat cement slurry and pointed in coloured cement to match the surface with floor over and including 10 mm thick cement rendering in cm 1:4.

M&L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in sub base.

M&L for 20mm thick Granite slab of approved shade, as in platform etc, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing including required cutting to suit the size of of platforms including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed.

M&L for 20mm thick prepolished Granite slab of approved shade, fixed in walls as shelves, partion selves etc with CM 1:3 mortrar complete all as specified and as directed.

M&L for coloured Chequred tiles, glossy finish, 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement & pigment, laid over & including 15mm thick screed bed in cement & sand mortar 1:4, complete, all as specified & as directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but n.ece 20 cm girth

S&F Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe) including connected to drains outlet, complete all as specified.

S & F repair vitreous china squatting pan Orrisa pattern size 580mm x 440mm white with integral foot rest with CI ‘P’ or ‘S’ trap and fixing in lime concrete (1 lime, 2 sand and 5 aggregate), 150mm thick all round and finished just below level of rim of pan to receive the floor finishing all as specified .

S & F in repairs PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified .

S&F in repirs wash basins, vitreous china, white, flat back of size 550x400mm including cutting for and pining in ends of brackets or errecting stand including 45 cm long PVC conncection 15mm PTMT with nuts, brass coupling and 15 mm CP Brass fancy type Pillar cock complete all as specified.

S&F in repairs vitreous china half stall urinal, Standard size, white with grating and union for discharge pipe includng providing and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plugs with and including 60mm long brass screws complete with PVC flush pipe complete all as specified and as directed.

S&F in repairs Tubular towel rail, Brass C P ,20mm dia, D type, 60cm long between flanges

S&F in repairs Jet Spray with 1 meter PVC Tube & and Stainless steel nozzel complete all as specified and as directed.

S&F in repairs cast iron waste and vent pipe in any length with or without ear with cement joints to wall or in floor 100mm dia.

S&F in repairs cast iron waste and vent pipe in any length with or without ear with cement joints to wall or in floor 75mm dia.

S&F 100 mm bore Cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed

S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified & as directed.

S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified & as directed.

S&F cast iron floor trap of 75 mm bore, with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4), complete all as specified & as directed.

Taking up or down steel tubing and connections 15 mm bore , including cleaning for re?fixing all as specified.

Taking up or down steel tubing and connections 20 mm bore , including cleaning for re?fixing all as specified.

S&F 15mm bore medium grade tube galvanised with all fittings and fixed complete concealed including groove cutting for concealing to walls & ceiling or laid in floor all as specified .

S&F 20mm bore medium grade tube galvanised with all fittings and fixed complete to walls & ceiling or laid in floor all as specified .

Supply and fixing in repair 500 Litre capacity Rotational moulded polyethylene water storage tanks (colour other than black as approved by Engineer-in-charge) triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

Supply and fixing in repair 100 Litre capacity Rotational moulded polyethylene water storage tanks (colour other than black as approved by Engineer-in-charge) triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

S&F 20mm float Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm- 690 gms)

S&F in repairs 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed

S&F in repairs bib taps long shank 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified .

S&F in repairs 15mm bore CP Angle cock one way chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified .

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm all as specified.

S&F in repairs swivel shower for C P Brass with shower arm 195mm long with bend of 45 degree 15mm dia (minimum weight 80 gms) all as specified.

S&F in repairs Aluminium Peg set of 6 all as specified.

M&L PCC 25 mm thick 1:2:4 type B1 using 20mm aggregate as in leveling course

M&L for complete removal (any number of layers) of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, treating oil, greasy spots etc by steel brushes or by any other suitable scrapping tools including cleaning of surfaces by spraying water and thereafter preparing of scrapped surfaces with 1mm thick wall care putty and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of 1mm thick wall care putty and a coat of primer of same make all as specified & as directed. Note : (i) The area of entire one Bldg will be scraped /removed and will be prepred with wall care putty. (ii) OBD wk will not be allowed until unless putty work is completed for whole Bldg. (iii) 2nd coat of OBD will be allowed only after Ist coat is completed for Bldg.

M&L for writing Bldg Numbers on walls over 02 coats of black paint with white emamel paint with Capital P- and writing 4 digits complete all as specified and directed. Note :- (1) Letters/digits height shall be 8cm to 10cm and width 1.5 cm to 2.0 cm. (2) Size /area of black painting will be the same as per old existing pattern of Unit Bldgs.

M&L for Demolition and breaking up drain pipes 150 mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar incl disposal of demolised materials out side Mil Station. complete all as specified

M & L cement concrete bed to drain pipe including packing under haunching of pipe after they are laid and tested in cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) bore of pipe 150mm.

M & L, 150mm bore reinforced concrete pipes, class NP-2, laid in trenches and jointed all as specified.

Dismentling of Bricks or brick tiles laid flat in roofs /floors, channels, kerbs, aprons, etc. (each layer) laid , bedded and pointed in cement mortar complete all as specified and as directed.

M&L for removing mud phuska from roof , stacking aside or disposing as directed .

M&L for PCC 1:3:6 type C-2 using 20mm graded crushed stone aggregate 50mm thick finished even and smooth as in roof paddings complete all as specified & as directed.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by flamed torched application complete all as specified.

M&L for Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surface over APP Mebrane as protective coatings complete all as specified & as directed.

M&L for 40mm thick brick tiles laid on 15mm thick cement plaster in CM 1:3 over pcc padding and joints grouted flush in cement mortar (1:3) mixed with 2% of WPC by weight of complete all as specified & as directed.

S&F 110mm bore PVC (SWR) pipes in repairs in any length jointed with solvent cement joints / rubber ring joints fixed to walls with necessary clamps as in RWP pipes complete all as specified.

Supply and fixing 75 mm bore PVC (SWR) bends any radius with access door complete all as specified.

M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in coping and the like including weathering slightly rounded or chamfered angles complete all as specified and directed.

M&L for provinding two coats of synthetic enamel paint over new surfaces and a coat of red oxide primeron steel surfaces including preparation of surface of any discription not exc 10 cm in width or girth complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed.

M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including sunk type pressed steel modular box covered with white modular cover plate and frame for housing switches, sockets, fan regulators etc complete, all as specified & directed. (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of BoQ' ).

All as per item No 86.00 (here-in-before) but ceiling fan /exhaust fan point controlled by one Number one way switch.

All as per srl item No. 86.00 (here-in-before) but for 15 Amp socket out let by using 2.50 Sqmm PVC insulated unsheathed copper conductor cable FRLS multi stranded on independent board including provn of 2.50 Sqmm unsheathed, multistranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed by Engineer-in-Charge.

S&F modular type switch, flush type, single pole, one way, 5/6 Amp, 230 Volts all as specified & directed.

S&F modular type switch, flush type, single pole, one way, 15/16Amp, 230 Volts all as specified & directed.

S&F modular type socket outlet multipurpose 3 Pin 15/16 Amp (with 3 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed.

S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S&F in replacement LED lights fitting 1x 40W, 230V, 50HZ regal batten for LED incl ultra bright glass LED tube light aluminium housing with very high efficiency, singel / double side connection complete.

S&F in replacement street light LED light fitting 20 Watt, 230V, 50HZ pressure die cast housing with epoxy powder coating, IP65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 25mm dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall all as specified and directed.

S & F MCB SP, 6 to 32 Amps 240 Volts , 'C' curve, 10 KA, IS-8828 marked for fixing in DB complete all as specified & directed. Note :-Make of MCB shall be same of that DB.

S&F MCB SPN, 40 Amps 240 Volts , type 'C' curve, 10 KA, IS-8828 marked fixing in DB complete all as specified & directed. Note :-Make of MCB shall be same of that DB.

S&F in replacement sheet metal enclosure distribution board SP&N, 8 way, double door, powder coated, protection class IP-42, suitable for mounting MCB, DBs confirming to IS-13032, IS-8632, BS-5484 with min 200 Amp rating copper bus bar, complete all as specified & directed.

S&F sheet metal enclosure distribution board TP&N, 4 way, double door, powder coated, protection class IP-42, suitable for mounting MCB, DBs confirming to IS-13032, IS-8632, BS-5484 with min 200 Amp rating copper bus bar, complete all as specified & directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore upto 7.50 metre long GI pipe light grade for earth wire protection fixed with poles/wall with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed including dismantling & taking out old existing unserviceable earthing. Note :- PCC chamber shall be constructed at least 1.5m away from the earth electrode and pipe for watering shall be provided in slanting manners.

Supply & fixing and testing metal body exhaust fan of 380mm sweep heavy duty, double ball bearing, 900 RPM, suitable for SP 230 / 250 volt, 50 Hz AC supply complete with louver shutter including fixing / grouting of frame in wall & cutting opening complete with covers & connecting with & including 3 Nos 1.5 sqmm single core, PVC insulated but unsheathed FRLS 1100 volts grade cable with multi-stranded copper conductor from ceiling rose to fan complete all as specified. Make : Model No Turbojet SP of Havells or Cat Part No Supreme DLX HD of Bajaj or Cat No Transair of Crompton equivalent of make as mentioned in Appx 'C' list of makes here-in-after.

Supply & fixing electric water heater, storage type mild steel body with glass lined coating (Outer body) with titanium armour technology inner tank coating for preventing corrison rusting and heating element upto 2KW cap 25ltr, BEE 3star rated complete with all accessories such as safety vlve, thermostate , NRV, connection piece etc complete & directed.

S&F in replacement sheet metal enclosures with sockets plug top and MCBs single pole enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp rating 240 volts etc complete all as specified and directed. Make :- Indo Asian Cat Part No 810393 or equivalent of makes mentioned in list of makes here-in-after .

S&F in repair Sub main wiring with two single core cable PVC insulated unsheathed of copper multi stranded conductor FRLS cable of size 4 sqmm, 1100 votls grade drawing through and including concealed conduit 25 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 4 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed by Engineer-in-charge including taking down old unserviceable submain wiring. Note:- (i)Two lengths of 4 Sqmm cable, one length of 4 Sqmm cable and one length of PVC conduit will be measured as one length. (ii) Cost of taking down existing submain wiring including all accessories is included in this item and nothing will be paid extra on this account

SHRI HARI BUILDERS (BID ID -3415197)

M/s Rao Constructions, 1173 Urban Estate-II, Hisar (BID ID -3410566)

LACHHMAN SINGH AND BROTHERS (BID ID -3416850)

VIKAS INFRASTRUCTURE (BID ID -3417025)