Providing Front Elevation, Name Board and Sign Board Arrangements for the work of New Girls Hostel Building for School of Nursing in Government Head Quarters Hospital at Cuddalore in Cuddalore District.

Aluminium Dye Cast Letters 9" size

Supplying and Fixing of Tamilnadu Government Emblem (15") of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process.

Supplying and fixing following Ornamental Teakwood entrance door as per the drawings and designs approved by the departmental officers.The size of the Door is 2.45 X 2.70 M The outer frame of the door is 152mmx127mm teakwood. The main door shutter opening size is 2.45mx2.7m. The main door should be double leaves and each door shutter fully panelled. The door shutter outer frame of size 127mmx50mm teakwood. The door panells shall be of 40mm thick teakwood planks with ornamental designs approved by the Executive Engineer. The door frames and shutters shall be given two coats of best approved quality polyurethane polishing. The rate inclusive of cost of approved Brass Tower Bolts size 400mmx12mm (4Nos), Brass Aldrops 300x16mm (1nos) Brass railway hinges 230 mmx40mm (8nos), ornamental door handle 600mm(2nos), door stoppers, Rubber bush, brass screws etc., The cost includes cost of material, labour charges, conveyance charges, fixing charges, designing charges and glass design charges, electricity charges and all other incidental charges., etc. All materials should be got approved by the Executive Engineer before use on works.

Painting the wall with Texture Finish Paint including labour charges etc., Complete.

Supplying and fixing of Modular sign (Foam boards) 3mm thick including embossing the letters of all fonts and sizes etc complete and as directed by the departmental officers.

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20 mm thick and Variety with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers. (The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work)

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used curing etc. complete complying with standard specification and as directed by the departmental officers.

GST @ 18%