T09/EDC2/MT/2024-25

Amount

(A) Shifting of line

Cartage of following material from store center Meerut to JE Store including loading & unloading at both ends maximum distance up to 40 Km. :– A) PCC Pole 8.5 mrt long/ST pole 11 mtr long.

B) ACSR Weasel Conductor

C) Rabit Concuctor

Cartage of line material from store centre to dump site & then dump site to site of work on day to day basis, including loading & unloading at both ends maximum distance up to 20 Km. (15 Qtl.)

Cartage of following material from JE Store to site of work including loading & unloading at both ends maximum distance up to 40 Km. :– A) PCC Pole 8.5 mrt long/ST pole 11 mtr long.

B) ACSR Weasel Conductor

C) Rabit Concuctor

Earting of each 11 KV line pole properly after drive of electrodes if size 20mmx250mm and connection the earthing point with GL wire.

Erection of PCC pole 8.5 mtr long/STP Pole 11 mrt long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of Soil including back filling of the pole with proper ramming after completion of work.

Fabrication and fixing of all 11 KV H.T/L.T. line accessories.

Erection of stay rod complete after digging a pit of size 1.20 x 0.60 x 1.6 mtr and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming.

Laying lifting stringing of proper sagging of ACSR weasel & Rabbit conductor for 3 phase, 3 wire 11 KV line including binding & jumpering properly.

Grouting of PCC/ST poles with Dust, Cement & Stone blast concreting.

Guarding of line with G.I. wire, 10 SWG

Fabrication & fixing of 11 KV Cross arm

Laying, lifting, sagging & binding of LT ABC cable of size (3x50+1x35+1x16 sq.mm.)

Laying, lifting, sagging & binding of LT ABC cable of size (1x16+1x25+1x16 sq.mm.)

Cutting & chopping tree branches near side of line for making the clearance between line and tree.

Providing and fixing stay clamps .

Providing and fixing J Hook

Providing and fixing Dead end clamp

Providing and fixing Holding clamps with nut & bolt

Providing and fixing F clamps .

Back cartage of following :- A) STP pole old & used

B) ACSR Weasel & Rabit Conductor old & used

C) MS Scrap Angle channel, cross arm old & used

shree sai enterprises